Related
I have been trying to get getch to work in another program with no success. So I have made the most basic program I can using getch the way I want it to work in the main program.
I have researched the need for noecho, cbreak, initscr and nodelay, I have also tried using newscr() but to no success.
The problem I am having is that the chars aren't being printed to the screen till I hit "enter", when they should be put to the screen every loop. Why is this happening? Also the cursor doesn't return to the left of the screen at the new line. eg.
abc
def
ghi
I have looked for the answer but am stumped again...
#include <stdio.h>
#include <ncurses.h>
int main()
{
initscr();cbreak(); noecho();nodelay(stdscr,0);
char c ;
while((c=getch())!=EOF){
putchar(c);}
return 0;
}
You're not seeing the output because your stdout stream is line buffered.
Your program is getting the individual characters all right; but the output stream is buffering them.
Try fflush(stdout); or switching stdout to unbuffered mode with setbuf(stdout, NULL);.
The problem with disabling buffering is that it's inefficient for bulk data processing when the output isn't a terminal.
You can make it conditional on the standard output being a tty:
if (isatty(fileno(stdout))) /* #include <unistd.h> */
setbuf(stdout, NULL);
To return the cursor to the start of the line, you need to put out a carriage return \r. This is because curses' cbreak mode has disabled the ONLCR tty mode (on Output, when sending NL add CR).
If you unconditionally add \r, then it will appear in files when your output is redirected. So again you need some isatty hack.
A much better might be to learn how to use the tcgetattr and tcsetattr functions to precisely control specific tty parameters, if all you want is to do character-at-a-time input without echo, and not actually develop an interactive curses-based program.
Do you really want character-at-a-time input, or just to diable echo? It's easy to disable echo. Call tcgetattr to fill a struct termios with the current settings of file descriptor 0 (if it is a tty). Flip some flags to turn off echoing, then call tcsetattr to install the updated structure. When your program exits, be nice and put back the original one. Done.
Yes, ncurses is a good way to get character-by-character control.
And yes, you must call "initscr()" and "cbreak()".
SUGGESTIONS:
1) Compare your code with this ncurses "hello world":
#include <ncurses.h>
int main()
{
initscr(); /* Start curses mode */
printw("Hello World !!!"); /* Print Hello World */
refresh(); /* Print it on to the real screen */
getch(); /* Wait for user input */
endwin(); /* End curses mode */
return 0;
}
2) See what happens if you do a "refresh()" and/or remove the "noecho()".
3) This tutorial has lots of good info that might also help:
http://tldp.org/HOWTO/NCURSES-Programming-HOWTO/
#include<stdio.h>
int main(void)
{
int c;
while((c=getchar())!=EOF)
{
if(c==8) // 8 is ASCII value of backspace
printf("\\b");
}
}
Now I want to enter backspace and want getchar() function to return ASCII of backspace to c(int variable)
Note- I am not asking about getch function i know that getch command is able to read backspace
I only want to know whether getchar is able to read backspace or not
If yes,How?
How to do it please explain me
I am new to C programming
If the stream stdin reads from a file, getchar() will handle backspace characters ('\b' or 8 in ASCII) like any other regular character and return it to the caller.
The reason it does not do that when reading from the console (aka terminal or tty) is related to the configuration of the console itself. The console is in cooked mode by default, so as to handle echo, backspace and line buffering, but also signals such as SIGINT sent for Ctrl-C and many more subtile settings.
The C Standard does not provide any way to change the terminal modes, but POSIX systems have the stty command and the termios system calls available to C programs to do this.
Once you configure the console in raw mode, also set stdin to unbuffered mode with setvbuf(stdin, NULL, _IONBF, 0) so getchar() reads each byte from the console as it is typed.
Configuring the console is a complex issue, you may want to read this first: http://www.linusakesson.net/programming/tty/
If your system supports termios as standardized in POSIX.1-2001, then you can manipulate the standard input terminal to not buffer your input. Consider the following example:
#define _POSIX_C_SOURCE 200809L
#include <stdlib.h>
#include <unistd.h>
#include <termios.h>
#include <signal.h>
#include <string.h>
#include <stdio.h>
#include <errno.h>
/* SIGINT handler */
static volatile sig_atomic_t done = 0;
static void handle_done(int signum)
{
if (!done)
done = signum;
}
static int install_done(const int signum)
{
struct sigaction act;
memset(&act, 0, sizeof act);
sigemptyset(&act.sa_mask);
act.sa_handler = handle_done;
act.sa_flags = 0;
if (sigaction(signum, &act, NULL) == -1)
return errno;
return 0;
}
/* Reverting terminal back to original settings */
static struct termios terminal_config;
static void revert_terminal(void)
{
tcsetattr(STDIN_FILENO, TCSAFLUSH, &terminal_config);
}
int main(void)
{
int c;
/* Set up INT (Ctrl+C), TERM, and HUP signal handlers. */
if (install_done(SIGINT) ||
install_done(SIGTERM) ||
install_done(SIGHUP)) {
fprintf(stderr, "Cannot install signal handlers: %s.\n", strerror(errno));
return EXIT_FAILURE;
}
/* Make terminal input noncanonical; not line buffered. Also disable echo. */
if (isatty(STDIN_FILENO)) {
struct termios config;
if (tcgetattr(STDIN_FILENO, &terminal_config) == 0 &&
tcgetattr(STDIN_FILENO, &config) == 0) {
config.c_lflag &= ~(ICANON | ECHO);
config.c_cc[VMIN] = 1; /* Blocking input */
config.c_cc[VTIME] = 0;
tcsetattr(STDIN_FILENO, TCSANOW, &config);
atexit(revert_terminal);
}
}
/* Set standard input unbuffered. */
setvbuf(stdin, NULL, _IONBF, 0);
printf("Press Ctrl+C to exit.\n");
fflush(stdout);
while (!done) {
c = fgetc(stdin);
if (c == EOF)
printf("Read EOF%s\n", ferror(stdin) ? " as an error occurred" : "");
else
printf("Read %d = 0x%02x\n", c, (unsigned int)c);
fflush(stdout);
}
return EXIT_SUCCESS;
}
The #define line tells your C library headers to expose POSIX.1 features for GNU-based systems.
The done flag is set whenever an INT (Ctrl+C), TERM, or HUP signal is received. (HUP signal is sent if you disconnect from the terminal, for example by closing the terminal window.)
The terminal_config structure will contain the original terminal settings, used by revert_terminal() registered as an at-exit function, to revert the terminal settings back to the original ones read at program startup.
The function isatty(STDIN_FILENO) returns 1 if standard input is a terminal. If so, we obtain the current terminal settings, and modify them for non-canonical mode, and ask that each read blocks until at least one character is read. (The I/O functions tend to get a bit confused if you set .c_cc[VMIN]=0 and .c_cc[VTIME]=0, so that if no input is pending, fgetc() returns 0. Typically it looks like an EOF to stdio.h I/O functions.)
Next, we tell the C library to not internally buffer standard input, using setvbuf(). Normally, the C library uses an input buffer for standard input, for efficiency. However, for us, it would mean the C library would buffer characters typed, and our program might not see them immediately when typed.
Similarly, standard output is also buffered for efficiency. The C library should flush all complete lines to the actual standard output, but we can use the fflush(stdout) call to ensure everything we've written to stdout is flushed to the actual standard output at that point.
In main(), we then have a simple loop, that reads keypresses, and prints them in decimal and hexadecimal.
Note that when a signal is delivered, for example the INT signal because you typed Ctrl+C, the delivery of the signal to our handle_done() signal handler interrupts the fgetc() call if one is pending. This is why you see Read EOF when you press Ctrl+C; if you check ferror(stdin) afterwards, you'll see it returns nonzero (which indicates an error occurred). The "error" in this case is EINTR, "interrupted by a signal".
Also note that when you press some certain keys, like cursor or function keys, you'll see multiple characters generated, usually beginning with 27 and 91 (decimal; 0x1B 0x5B in hexadecimal; "\033[" if expressed as a C string literal). These are usually, but not always, ANSI escape sequences. In general, they are terminal-specific codes that one can obtain via tigetstr(), tigetnum(), and tigetflag() using the terminfo database.
A much more portable way to do this, is to use a Curses library; either ncurses on most systems, or PDCurses on Windows machines. Not only do they provide a much easier interface, but it does it in a terminal-specific way, for maximum compatibility across systems.
C programs using the Curses functions can be compiled against any Curses library, so the same C source file can be compiled and run on Linux, Mac, and Windows machines. However, ncurses does contain quite a few extensions, which may not be provided by other Curses libraries like PDCurses.
In the next code:
#include <stdio.h>
int main(void) {
int c;
while ((c=getchar())!= EOF)
putchar(c);
return 0;
}
I have to press Enter to print all the letters I entered with getchar, but I don't want to do this, what I want to do is to press the letter and immediately see the the letter I introduced repeated without pressing Enter. For example, if I press the letter 'a' I want to see an other 'a' next to it, and so on:
aabbccddeeff.....
But when I press 'a' nothing happens, I can write other letters and the copy appears only when I press Enter:
abcdef
abcdef
How can I do this?
I am using the command cc -o example example.c under Ubuntu for compiling.
This depends on your OS, if you are in a UNIX like environment the ICANON flag is enabled by default, so input is buffered until the next '\n' or EOF. By disabling the canonical mode you will get the characters immediately. This is also possible on other platforms, but there is no straight forward cross-platform solution.
EDIT: I see you specified that you use Ubuntu. I just posted something similar yesterday, but be aware that this will disable many default behaviors of your terminal.
#include<stdio.h>
#include <termios.h> //termios, TCSANOW, ECHO, ICANON
#include <unistd.h> //STDIN_FILENO
int main(void){
int c;
static struct termios oldt, newt;
/*tcgetattr gets the parameters of the current terminal
STDIN_FILENO will tell tcgetattr that it should write the settings
of stdin to oldt*/
tcgetattr( STDIN_FILENO, &oldt);
/*now the settings will be copied*/
newt = oldt;
/*ICANON normally takes care that one line at a time will be processed
that means it will return if it sees a "\n" or an EOF or an EOL*/
newt.c_lflag &= ~(ICANON);
/*Those new settings will be set to STDIN
TCSANOW tells tcsetattr to change attributes immediately. */
tcsetattr( STDIN_FILENO, TCSANOW, &newt);
/*This is your part:
I choose 'e' to end input. Notice that EOF is also turned off
in the non-canonical mode*/
while((c=getchar())!= 'e')
putchar(c);
/*restore the old settings*/
tcsetattr( STDIN_FILENO, TCSANOW, &oldt);
return 0;
}
You will notice, that every character appears twice. This is because the input is immediately echoed back to the terminal and then your program puts it back with putchar() too. If you want to disassociate the input from the output, you also have to turn of the ECHO flag. You can do this by simply changing the appropriate line to:
newt.c_lflag &= ~(ICANON | ECHO);
On a linux system, you can modify terminal behaviour using the stty command. By default, the terminal will buffer all information until Enter is pressed, before even sending it to the C program.
A quick, dirty, and not-particularly-portable example to change the behaviour from within the program itself:
#include<stdio.h>
#include<stdlib.h>
int main(void){
int c;
/* use system call to make terminal send all keystrokes directly to stdin */
system ("/bin/stty raw");
while((c=getchar())!= '.') {
/* type a period to break out of the loop, since CTRL-D won't work raw */
putchar(c);
}
/* use system call to set terminal behaviour to more normal behaviour */
system ("/bin/stty cooked");
return 0;
}
Please note that this isn't really optimal, since it just sort of assumes that stty cooked is the behaviour you want when the program exits, rather than checking what the original terminal settings were. Also, since all special processing is skipped in raw mode, many key sequences (such as CTRL-C or CTRL-D) won't actually work as you expect them to without explicitly processing them in the program.
You can man stty for more control over the terminal behaviour, depending exactly on what you want to achieve.
getchar() is a standard function that on many platforms requires you to press ENTER to get the input, because the platform buffers input until that key is pressed. Many compilers/platforms support the non-standard getch() that does not care about ENTER (bypasses platform buffering, treats ENTER like just another key).
I/O is an operating system function. In many cases, the operating system won't pass typed character to a program until ENTER is pressed. This allows the user to modify the input (such as backspacing and retyping) before sending it to the program. For most purposes, this works well, presents a consistent interface to the user, and relieves the program from having to deal with this. In some cases, it's desirable for a program to get characters from keys as they are pressed.
The C library itself deals with files, and doesn't concern itself with how data gets into the input file. Therefore, there's no way in the language itself to get keys as they are pressed; instead, this is platform-specific. Since you haven't specified OS or compiler, we can't look it up for you.
Also, the standard output is normally buffered for efficiency. This is done by the C libraries, and so there is a C solution, which is to fflush(stdout); after each character written. After that, whether the characters are displayed immediately is up to the operating system, but all the OSes I'm familiar with will display the output immediately, so that's not normally a problem.
I like Lucas answer, but I would like to elaborate it a bit. There is a built-in function in termios.h named cfmakeraw() which man describes as:
cfmakeraw() sets the terminal to something like the "raw" mode of the
old Version 7 terminal driver: input is available character by
character, echoing is disabled, and all special processing of
terminal input and output characters is disabled. [...]
This basically does the same as what Lucas suggested and more, you can see the exact flags it sets in the man pages: termios(3).
Use case
int c = 0;
static struct termios oldTermios, newTermios;
tcgetattr(STDIN_FILENO, &oldTermios);
newTermios = oldTermios;
cfmakeraw(&newTermios);
tcsetattr(STDIN_FILENO, TCSANOW, &newTermios);
c = getchar();
tcsetattr(STDIN_FILENO, TCSANOW, &oldTermios);
switch (c) {
case 113: // q
printf("\n\n");
exit(0);
break;
case 105: // i
printf("insert\n");
break;
default:
break;
Since you are working on a Unix derivative (Ubuntu), here is one way to do it - not recommended, but it will work (as long as you can type commands accurately):
echo "stty -g $(stty -g)" > restore-sanity
stty cbreak
./your_program
Use interrupt to stop the program when you are bored with it.
sh restore-sanity
The 'echo' line saves the current terminal settings as a shell script that will restore them.
The 'stty' line turns off most of the special processing (so Control-D has no effect, for example) and sends characters to the program as soon as they are available. It means you cannot edit your typing any more.
The 'sh' line reinstates your original terminal settings.
You can economize if 'stty sane' restores your settings sufficiently accurately for your purposes. The format of '-g' is not portable across versions of 'stty' (so what is generated on Solaris 10 won't work on Linux, or vice versa), but the concept works everywhere. The 'stty sane' option is not universally available, AFAIK (but is on Linux).
You could include the 'ncurses' library, and use getch() instead of getchar().
"How to avoid pressing Enter with getchar()?"
First of all, terminal input is commonly either line or fully buffered. This means that the operating system stores the actual input from the terminal in a buffer. Usually, this buffer is flushed to the program when e.g. \n was signalized/provided in stdin. This is f.e. made by a press to Enter.
getchar() is just at the end of the chain. It has no ability to actually influence the buffering process.
"How can I do this?"
Ditch getchar() in the first place, if you don´t want to use specific system calls to change the behavior of the terminal explicitly like well explained in the other answers.
There is unfortunately no standard library function and with that no portable way to flush the buffer at single character input. However, there are implementation-based and non-portable solutions.
In Windows/MS-DOS, there are the getch() and getche() functions in the conio.h header file, which do exactly the thing you want - read a single character without the need to wait for the newline to flush the buffer.
The main difference between getch() and getche() is that getch() does not immediately output the actual input character in the console, while getche() does. The additional "e" stands for echo.
Example:
#include <stdio.h>
#include <conio.h>
int main (void)
{
int c;
while ((c = getche()) != EOF)
{
if (c == '\n')
{
break;
}
printf("\n");
}
return 0;
}
In Linux, a way to obtain direct character processing and output is to use the cbreak() and echo() options and the getch() and refresh() routines in the ncurses-library.
Note, that you need to initialize the so called standard screen with the initscr() and close the same with the endwin() routines.
Example:
#include <stdio.h>
#include <ncurses.h>
int main (void)
{
int c;
cbreak();
echo();
initscr();
while ((c = getch()) != ERR)
{
if (c == '\n')
{
break;
}
printf("\n");
refresh();
}
endwin();
return 0;
}
Note: You need to invoke the compiler with the -lncurses option, so that the linker can search and find the ncurses-library.
yes you can do this on windows too, here's the code below, using the conio.h library
#include <iostream> //basic input/output
#include <conio.h> //provides non standard getch() function
using namespace std;
int main()
{
cout << "Password: ";
string pass;
while(true)
{
char ch = getch();
if(ch=='\r'){ //when a carriage return is found [enter] key
cout << endl << "Your password is: " << pass <<endl;
break;
}
pass+=ch;
cout << "*";
}
getch();
return 0;
}
I've had this problem/question come up in an assignment that I'm currently working on.
It also depends on which input you are grabbing from.
I am using
/dev/tty
to get input while the program is running, so that needs to be the filestream associated with the command.
On the ubuntu machine I have to test/target, it required more than just
system( "stty -raw" );
or
system( "stty -icanon" );
I had to add the --file flag, as well as path to the command, like so:
system( "/bin/stty --file=/dev/tty -icanon" );
Everything is copacetic now.
This code worked for me. Attention : this is not part of the standard library, even if most compilers (I use GCC) supports it.
#include <stdio.h>
#include <conio.h>
int main(int argc, char const *argv[]) {
char a = getch();
printf("You typed a char with an ASCII value of %d, printable as '%c'\n", a, a);
return 0;
}
This code detects the first key press.
Can create a new function that checks for Enter:
#include <stdio.h>
char getChar()
{
printf("Please enter a char:\n");
char c = getchar();
if (c == '\n')
{
c = getchar();
}
return c;
}
int main(int argc, char *argv[])
{
char ch;
while ((ch = getChar()) != '.')
{
printf("Your char: %c\n", ch);
}
return 0;
}
By default, the C library buffers the output until it sees a return. To print out the results immediately, use fflush:
while((c=getchar())!= EOF)
{
putchar(c);
fflush(stdout);
}
you can use _getch() instead of getch() from <conio.h>
I have been trying to get getch to work in another program with no success. So I have made the most basic program I can using getch the way I want it to work in the main program.
I have researched the need for noecho, cbreak, initscr and nodelay, I have also tried using newscr() but to no success.
The problem I am having is that the chars aren't being printed to the screen till I hit "enter", when they should be put to the screen every loop. Why is this happening? Also the cursor doesn't return to the left of the screen at the new line. eg.
abc
def
ghi
I have looked for the answer but am stumped again...
#include <stdio.h>
#include <ncurses.h>
int main()
{
initscr();cbreak(); noecho();nodelay(stdscr,0);
char c ;
while((c=getch())!=EOF){
putchar(c);}
return 0;
}
You're not seeing the output because your stdout stream is line buffered.
Your program is getting the individual characters all right; but the output stream is buffering them.
Try fflush(stdout); or switching stdout to unbuffered mode with setbuf(stdout, NULL);.
The problem with disabling buffering is that it's inefficient for bulk data processing when the output isn't a terminal.
You can make it conditional on the standard output being a tty:
if (isatty(fileno(stdout))) /* #include <unistd.h> */
setbuf(stdout, NULL);
To return the cursor to the start of the line, you need to put out a carriage return \r. This is because curses' cbreak mode has disabled the ONLCR tty mode (on Output, when sending NL add CR).
If you unconditionally add \r, then it will appear in files when your output is redirected. So again you need some isatty hack.
A much better might be to learn how to use the tcgetattr and tcsetattr functions to precisely control specific tty parameters, if all you want is to do character-at-a-time input without echo, and not actually develop an interactive curses-based program.
Do you really want character-at-a-time input, or just to diable echo? It's easy to disable echo. Call tcgetattr to fill a struct termios with the current settings of file descriptor 0 (if it is a tty). Flip some flags to turn off echoing, then call tcsetattr to install the updated structure. When your program exits, be nice and put back the original one. Done.
Yes, ncurses is a good way to get character-by-character control.
And yes, you must call "initscr()" and "cbreak()".
SUGGESTIONS:
1) Compare your code with this ncurses "hello world":
#include <ncurses.h>
int main()
{
initscr(); /* Start curses mode */
printw("Hello World !!!"); /* Print Hello World */
refresh(); /* Print it on to the real screen */
getch(); /* Wait for user input */
endwin(); /* End curses mode */
return 0;
}
2) See what happens if you do a "refresh()" and/or remove the "noecho()".
3) This tutorial has lots of good info that might also help:
http://tldp.org/HOWTO/NCURSES-Programming-HOWTO/
I have been trying to get getch to work in another program with no success. So I have made the most basic program I can using getch the way I want it to work in the main program.
I have researched the need for noecho, cbreak, initscr and nodelay, I have also tried using newscr() but to no success.
The problem I am having is that the chars aren't being printed to the screen till I hit "enter", when they should be put to the screen every loop. Why is this happening? Also the cursor doesn't return to the left of the screen at the new line. eg.
abc
def
ghi
I have looked for the answer but am stumped again...
#include <stdio.h>
#include <ncurses.h>
int main()
{
initscr();cbreak(); noecho();nodelay(stdscr,0);
char c ;
while((c=getch())!=EOF){
putchar(c);}
return 0;
}
You're not seeing the output because your stdout stream is line buffered.
Your program is getting the individual characters all right; but the output stream is buffering them.
Try fflush(stdout); or switching stdout to unbuffered mode with setbuf(stdout, NULL);.
The problem with disabling buffering is that it's inefficient for bulk data processing when the output isn't a terminal.
You can make it conditional on the standard output being a tty:
if (isatty(fileno(stdout))) /* #include <unistd.h> */
setbuf(stdout, NULL);
To return the cursor to the start of the line, you need to put out a carriage return \r. This is because curses' cbreak mode has disabled the ONLCR tty mode (on Output, when sending NL add CR).
If you unconditionally add \r, then it will appear in files when your output is redirected. So again you need some isatty hack.
A much better might be to learn how to use the tcgetattr and tcsetattr functions to precisely control specific tty parameters, if all you want is to do character-at-a-time input without echo, and not actually develop an interactive curses-based program.
Do you really want character-at-a-time input, or just to diable echo? It's easy to disable echo. Call tcgetattr to fill a struct termios with the current settings of file descriptor 0 (if it is a tty). Flip some flags to turn off echoing, then call tcsetattr to install the updated structure. When your program exits, be nice and put back the original one. Done.
Yes, ncurses is a good way to get character-by-character control.
And yes, you must call "initscr()" and "cbreak()".
SUGGESTIONS:
1) Compare your code with this ncurses "hello world":
#include <ncurses.h>
int main()
{
initscr(); /* Start curses mode */
printw("Hello World !!!"); /* Print Hello World */
refresh(); /* Print it on to the real screen */
getch(); /* Wait for user input */
endwin(); /* End curses mode */
return 0;
}
2) See what happens if you do a "refresh()" and/or remove the "noecho()".
3) This tutorial has lots of good info that might also help:
http://tldp.org/HOWTO/NCURSES-Programming-HOWTO/