Related
How to list row count of each table in the database. Some equivalent of
select count(*) from table1
select count(*) from table2
...
select count(*) from tableN
I will post a solution but other approaches are welcome
If you're using SQL Server 2005 and up, you can also use this:
SELECT
t.NAME AS TableName,
i.name as indexName,
p.[Rows],
sum(a.total_pages) as TotalPages,
sum(a.used_pages) as UsedPages,
sum(a.data_pages) as DataPages,
(sum(a.total_pages) * 8) / 1024 as TotalSpaceMB,
(sum(a.used_pages) * 8) / 1024 as UsedSpaceMB,
(sum(a.data_pages) * 8) / 1024 as DataSpaceMB
FROM
sys.tables t
INNER JOIN
sys.indexes i ON t.OBJECT_ID = i.object_id
INNER JOIN
sys.partitions p ON i.object_id = p.OBJECT_ID AND i.index_id = p.index_id
INNER JOIN
sys.allocation_units a ON p.partition_id = a.container_id
WHERE
t.NAME NOT LIKE 'dt%' AND
i.OBJECT_ID > 255 AND
i.index_id <= 1
GROUP BY
t.NAME, i.object_id, i.index_id, i.name, p.[Rows]
ORDER BY
object_name(i.object_id)
In my opinion, it's easier to handle than the sp_msforeachtable output.
A snippet I found at http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=21021 that helped me:
select t.name TableName, i.rows Records
from sysobjects t, sysindexes i
where t.xtype = 'U' and i.id = t.id and i.indid in (0,1)
order by TableName;
To get that information in SQL Management Studio, right click on the database, then select Reports --> Standard Reports --> Disk Usage by Table.
SELECT
T.NAME AS 'TABLE NAME',
P.[ROWS] AS 'NO OF ROWS'
FROM SYS.TABLES T
INNER JOIN SYS.PARTITIONS P ON T.OBJECT_ID=P.OBJECT_ID;
As seen here, this will return correct counts, where methods using the meta data tables will only return estimates.
CREATE PROCEDURE ListTableRowCounts
AS
BEGIN
SET NOCOUNT ON
CREATE TABLE #TableCounts
(
TableName VARCHAR(500),
CountOf INT
)
INSERT #TableCounts
EXEC sp_msForEachTable
'SELECT PARSENAME(''?'', 1),
COUNT(*) FROM ? WITH (NOLOCK)'
SELECT TableName , CountOf
FROM #TableCounts
ORDER BY TableName
DROP TABLE #TableCounts
END
GO
sp_MSForEachTable 'DECLARE #t AS VARCHAR(MAX);
SELECT #t = CAST(COUNT(1) as VARCHAR(MAX))
+ CHAR(9) + CHAR(9) + ''?'' FROM ? ; PRINT #t'
Output:
Well luckily SQL Server management studio gives you a hint on how to do this.
Do this,
start a SQL Server trace and open the activity you are doing (filter
by your login ID if you're not alone and set the application Name
to Microsoft SQL Server Management Studio), pause the trace and discard any results you have recorded till now;
Then, right click a table and select property from the pop up menu;
start the trace again;
Now in SQL Server Management studio select the storage property item on the left;
Pause the trace and have a look at what TSQL is generated by microsoft.
In the probably last query you will see a statement starting with exec sp_executesql N'SELECT
when you copy the executed code to visual studio you will notice that this code generates all the data the engineers at microsoft used to populate the property window.
when you make moderate modifications to that query you will get to something like this:
SELECT
SCHEMA_NAME(tbl.schema_id)+'.'+tbl.name as [table], --> something I added
p.partition_number AS [PartitionNumber],
prv.value AS [RightBoundaryValue],
fg.name AS [FileGroupName],
CAST(pf.boundary_value_on_right AS int) AS [RangeType],
CAST(p.rows AS float) AS [RowCount],
p.data_compression AS [DataCompression]
FROM sys.tables AS tbl
INNER JOIN sys.indexes AS idx ON idx.object_id = tbl.object_id and idx.index_id < 2
INNER JOIN sys.partitions AS p ON p.object_id=CAST(tbl.object_id AS int) AND p.index_id=idx.index_id
LEFT OUTER JOIN sys.destination_data_spaces AS dds ON dds.partition_scheme_id = idx.data_space_id and dds.destination_id = p.partition_number
LEFT OUTER JOIN sys.partition_schemes AS ps ON ps.data_space_id = idx.data_space_id
LEFT OUTER JOIN sys.partition_range_values AS prv ON prv.boundary_id = p.partition_number and prv.function_id = ps.function_id
LEFT OUTER JOIN sys.filegroups AS fg ON fg.data_space_id = dds.data_space_id or fg.data_space_id = idx.data_space_id
LEFT OUTER JOIN sys.partition_functions AS pf ON pf.function_id = prv.function_id
Now the query is not perfect and you could update it to meet other questions you might have, the point is, you can use the knowledge of microsoft to get to most of the questions you have by executing the data you're interested in and trace the TSQL generated using profiler.
I kind of like to think that MS engineers know how SQL server work and, it will generate TSQL that works on all items you can work with using the version on SSMS you are using so it's quite good on a large variety releases prerviouse, current and future.
And remember, don't just copy, try to understand it as well else you might end up with the wrong solution.
Walter
This approaches uses string concatenation to produce a statement with all tables and their counts dynamically, like the example(s) given in the original question:
SELECT COUNT(*) AS Count,'[dbo].[tbl1]' AS TableName FROM [dbo].[tbl1]
UNION ALL SELECT COUNT(*) AS Count,'[dbo].[tbl2]' AS TableName FROM [dbo].[tbl2]
UNION ALL SELECT...
Finally this is executed with EXEC:
DECLARE #cmd VARCHAR(MAX)=STUFF(
(
SELECT 'UNION ALL SELECT COUNT(*) AS Count,'''
+ QUOTENAME(t.TABLE_SCHEMA) + '.' + QUOTENAME(t.TABLE_NAME)
+ ''' AS TableName FROM ' + QUOTENAME(t.TABLE_SCHEMA) + '.' + QUOTENAME(t.TABLE_NAME)
FROM INFORMATION_SCHEMA.TABLES AS t
WHERE TABLE_TYPE='BASE TABLE'
FOR XML PATH('')
),1,10,'');
EXEC(#cmd);
The first thing that came to mind was to use sp_msForEachTable
exec sp_msforeachtable 'select count(*) from ?'
that does not list the table names though, so it can be extended to
exec sp_msforeachtable 'select parsename(''?'', 1), count(*) from ?'
The problem here is that if the database has more than 100 tables you will get the following error message:
The query has exceeded the maximum
number of result sets that can be
displayed in the results grid. Only
the first 100 result sets are
displayed in the grid.
So I ended up using table variable to store the results
declare #stats table (n sysname, c int)
insert into #stats
exec sp_msforeachtable 'select parsename(''?'', 1), count(*) from ?'
select
*
from #stats
order by c desc
Fastest way to find row count of all tables in SQL Refreence (http://www.codeproject.com/Tips/811017/Fastest-way-to-find-row-count-of-all-tables-in-SQL)
SELECT T.name AS [TABLE NAME], I.rows AS [ROWCOUNT]
FROM sys.tables AS T
INNER JOIN sys.sysindexes AS I ON T.object_id = I.id
AND I.indid < 2
ORDER BY I.rows DESC
I want to share what's working for me
SELECT
QUOTENAME(SCHEMA_NAME(sOBJ.schema_id)) + '.' + QUOTENAME(sOBJ.name) AS [TableName]
, SUM(sdmvPTNS.row_count) AS [RowCount]
FROM
sys.objects AS sOBJ
INNER JOIN sys.dm_db_partition_stats AS sdmvPTNS
ON sOBJ.object_id = sdmvPTNS.object_id
WHERE
sOBJ.type = 'U'
AND sOBJ.is_ms_shipped = 0x0
AND sdmvPTNS.index_id < 2
GROUP BY
sOBJ.schema_id
, sOBJ.name
ORDER BY [TableName]
GO
The database is hosted in Azure and the final result is:
Credit: https://www.mssqltips.com/sqlservertip/2537/sql-server-row-count-for-all-tables-in-a-database/
Here is my take on this question. It contains all schemas and lists only tables with rows. YMMV
select distinct schema_name(t.schema_id) as schema_name, t.name as
table_name, p.[Rows]
from sys.tables as t
INNER JOIN sys.indexes as i ON t.OBJECT_ID = i.object_id
INNER JOIN sys.partitions p ON i.object_id = p.OBJECT_ID AND i.index_id =
p.index_id
where p.[Rows] > 0
order by schema_name;
If you use MySQL >4.x you can use this:
select TABLE_NAME, TABLE_ROWS from information_schema.TABLES where TABLE_SCHEMA="test";
Keep in mind that for some storage engines, TABLE_ROWS is an approximation.
The accepted answer didn't work for me on Azure SQL, here's one that did, it's super fast and did exactly what I wanted:
select t.name, s.row_count
from sys.tables t
join sys.dm_db_partition_stats s
ON t.object_id = s.object_id
and t.type_desc = 'USER_TABLE'
and t.name not like '%dss%'
and s.index_id = 1
order by s.row_count desc
You could try this:
SELECT OBJECT_SCHEMA_NAME(ps.object_Id) AS [schemaname],
OBJECT_NAME(ps.object_id) AS [tablename],
row_count AS [rows]
FROM sys.dm_db_partition_stats ps
WHERE OBJECT_SCHEMA_NAME(ps.object_Id) <> 'sys' AND ps.index_id < 2
ORDER BY
OBJECT_SCHEMA_NAME(ps.object_Id),
OBJECT_NAME(ps.object_id)
This sql script gives the schema, table name and row count of each table in a database selected:
SELECT SCHEMA_NAME(schema_id) AS [SchemaName],
[Tables].name AS [TableName],
SUM([Partitions].[rows]) AS [TotalRowCount]
FROM sys.tables AS [Tables]
JOIN sys.partitions AS [Partitions]
ON [Tables].[object_id] = [Partitions].[object_id]
AND [Partitions].index_id IN ( 0, 1 )
-- WHERE [Tables].name = N'name of the table'
GROUP BY SCHEMA_NAME(schema_id), [Tables].name
order by [TotalRowCount] desc
Ref: https://blog.sqlauthority.com/2017/05/24/sql-server-find-row-count-every-table-database-efficiently/
Another way of doing this:
SELECT o.NAME TABLENAME,
i.rowcnt
FROM sysindexes AS i
INNER JOIN sysobjects AS o ON i.id = o.id
WHERE i.indid < 2 AND OBJECTPROPERTY(o.id, 'IsMSShipped') = 0
ORDER BY i.rowcnt desc
I think that the shortest, fastest and simplest way would be:
SELECT
object_name(object_id) AS [Table],
SUM(row_count) AS [Count]
FROM
sys.dm_db_partition_stats
WHERE
--object_schema_name(object_id) = 'dbo' AND
index_id < 2
GROUP BY
object_id
USE DatabaseName
CREATE TABLE #counts
(
table_name varchar(255),
row_count int
)
EXEC sp_MSForEachTable #command1='INSERT #counts (table_name, row_count) SELECT ''?'', COUNT(*) FROM ?'
SELECT table_name, row_count FROM #counts ORDER BY table_name, row_count DESC
DROP TABLE #counts
From this question:
https://dba.stackexchange.com/questions/114958/list-all-tables-from-all-user-databases/230411#230411
I added record count to the answer provided by #Aaron Bertrand that lists all databases and all tables.
DECLARE #src NVARCHAR(MAX), #sql NVARCHAR(MAX);
SELECT #sql = N'', #src = N' UNION ALL
SELECT ''$d'' as ''database'',
s.name COLLATE SQL_Latin1_General_CP1_CI_AI as ''schema'',
t.name COLLATE SQL_Latin1_General_CP1_CI_AI as ''table'' ,
ind.rows as record_count
FROM [$d].sys.schemas AS s
INNER JOIN [$d].sys.tables AS t ON s.[schema_id] = t.[schema_id]
INNER JOIN [$d].sys.sysindexes AS ind ON t.[object_id] = ind.[id]
where ind.indid < 2';
SELECT #sql = #sql + REPLACE(#src, '$d', name)
FROM sys.databases
WHERE database_id > 4
AND [state] = 0
AND HAS_DBACCESS(name) = 1;
SET #sql = STUFF(#sql, 1, 10, CHAR(13) + CHAR(10));
PRINT #sql;
--EXEC sys.sp_executesql #sql;
You can copy, past and execute this piece of code to get all table record counts into a table. Note: Code is commented with instructions
create procedure RowCountsPro
as
begin
--drop the table if exist on each exicution
IF OBJECT_ID (N'dbo.RowCounts', N'U') IS NOT NULL
DROP TABLE dbo.RowCounts;
-- creating new table
CREATE TABLE RowCounts
( [TableName] VARCHAR(150)
, [RowCount] INT
, [Reserved] NVARCHAR(50)
, [Data] NVARCHAR(50)
, [Index_Size] NVARCHAR(50)
, [UnUsed] NVARCHAR(50))
--inserting all records
INSERT INTO RowCounts([TableName], [RowCount],[Reserved],[Data],[Index_Size],[UnUsed])
-- "sp_MSforeachtable" System Procedure, 'sp_spaceused "?"' param to get records and resources used
EXEC sp_MSforeachtable 'sp_spaceused "?"'
-- selecting data and returning a table of data
SELECT [TableName], [RowCount],[Reserved],[Data],[Index_Size],[UnUsed]
FROM RowCounts
ORDER BY [TableName]
end
I have tested this code and it works fine on SQL Server 2014.
SELECT ( Schema_name(A.schema_id) + '.' + A.NAME ) AS TableName,
Sum(B.rows)AS RecordCount
FROM sys.objects A INNER JOIN sys.partitions B
ON A.object_id = B.object_id WHERE A.type = 'U'
GROUP BY A.schema_id,A.NAME ;
QUERY_PHOTO
QUERY_RESULT_PHOTO
Shnugo's answer is the ONLY one that works in Azure with Externa Tables. (1) Azure SQL doesn't support sp_MSforeachtable at all and (2) rows in sys.partitions for an External table is always 0.
select T.object_id, T.name, I.indid, I.rows
from Sys.tables T
left join Sys.sysindexes I
on (I.id = T.object_id and (indid =1 or indid =0 ))
where T.type='U'
Here indid=1 means a CLUSTERED index and indid=0 is a HEAP
How to list row count of each table in the database. Some equivalent of
select count(*) from table1
select count(*) from table2
...
select count(*) from tableN
I will post a solution but other approaches are welcome
If you're using SQL Server 2005 and up, you can also use this:
SELECT
t.NAME AS TableName,
i.name as indexName,
p.[Rows],
sum(a.total_pages) as TotalPages,
sum(a.used_pages) as UsedPages,
sum(a.data_pages) as DataPages,
(sum(a.total_pages) * 8) / 1024 as TotalSpaceMB,
(sum(a.used_pages) * 8) / 1024 as UsedSpaceMB,
(sum(a.data_pages) * 8) / 1024 as DataSpaceMB
FROM
sys.tables t
INNER JOIN
sys.indexes i ON t.OBJECT_ID = i.object_id
INNER JOIN
sys.partitions p ON i.object_id = p.OBJECT_ID AND i.index_id = p.index_id
INNER JOIN
sys.allocation_units a ON p.partition_id = a.container_id
WHERE
t.NAME NOT LIKE 'dt%' AND
i.OBJECT_ID > 255 AND
i.index_id <= 1
GROUP BY
t.NAME, i.object_id, i.index_id, i.name, p.[Rows]
ORDER BY
object_name(i.object_id)
In my opinion, it's easier to handle than the sp_msforeachtable output.
A snippet I found at http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=21021 that helped me:
select t.name TableName, i.rows Records
from sysobjects t, sysindexes i
where t.xtype = 'U' and i.id = t.id and i.indid in (0,1)
order by TableName;
To get that information in SQL Management Studio, right click on the database, then select Reports --> Standard Reports --> Disk Usage by Table.
SELECT
T.NAME AS 'TABLE NAME',
P.[ROWS] AS 'NO OF ROWS'
FROM SYS.TABLES T
INNER JOIN SYS.PARTITIONS P ON T.OBJECT_ID=P.OBJECT_ID;
As seen here, this will return correct counts, where methods using the meta data tables will only return estimates.
CREATE PROCEDURE ListTableRowCounts
AS
BEGIN
SET NOCOUNT ON
CREATE TABLE #TableCounts
(
TableName VARCHAR(500),
CountOf INT
)
INSERT #TableCounts
EXEC sp_msForEachTable
'SELECT PARSENAME(''?'', 1),
COUNT(*) FROM ? WITH (NOLOCK)'
SELECT TableName , CountOf
FROM #TableCounts
ORDER BY TableName
DROP TABLE #TableCounts
END
GO
sp_MSForEachTable 'DECLARE #t AS VARCHAR(MAX);
SELECT #t = CAST(COUNT(1) as VARCHAR(MAX))
+ CHAR(9) + CHAR(9) + ''?'' FROM ? ; PRINT #t'
Output:
Well luckily SQL Server management studio gives you a hint on how to do this.
Do this,
start a SQL Server trace and open the activity you are doing (filter
by your login ID if you're not alone and set the application Name
to Microsoft SQL Server Management Studio), pause the trace and discard any results you have recorded till now;
Then, right click a table and select property from the pop up menu;
start the trace again;
Now in SQL Server Management studio select the storage property item on the left;
Pause the trace and have a look at what TSQL is generated by microsoft.
In the probably last query you will see a statement starting with exec sp_executesql N'SELECT
when you copy the executed code to visual studio you will notice that this code generates all the data the engineers at microsoft used to populate the property window.
when you make moderate modifications to that query you will get to something like this:
SELECT
SCHEMA_NAME(tbl.schema_id)+'.'+tbl.name as [table], --> something I added
p.partition_number AS [PartitionNumber],
prv.value AS [RightBoundaryValue],
fg.name AS [FileGroupName],
CAST(pf.boundary_value_on_right AS int) AS [RangeType],
CAST(p.rows AS float) AS [RowCount],
p.data_compression AS [DataCompression]
FROM sys.tables AS tbl
INNER JOIN sys.indexes AS idx ON idx.object_id = tbl.object_id and idx.index_id < 2
INNER JOIN sys.partitions AS p ON p.object_id=CAST(tbl.object_id AS int) AND p.index_id=idx.index_id
LEFT OUTER JOIN sys.destination_data_spaces AS dds ON dds.partition_scheme_id = idx.data_space_id and dds.destination_id = p.partition_number
LEFT OUTER JOIN sys.partition_schemes AS ps ON ps.data_space_id = idx.data_space_id
LEFT OUTER JOIN sys.partition_range_values AS prv ON prv.boundary_id = p.partition_number and prv.function_id = ps.function_id
LEFT OUTER JOIN sys.filegroups AS fg ON fg.data_space_id = dds.data_space_id or fg.data_space_id = idx.data_space_id
LEFT OUTER JOIN sys.partition_functions AS pf ON pf.function_id = prv.function_id
Now the query is not perfect and you could update it to meet other questions you might have, the point is, you can use the knowledge of microsoft to get to most of the questions you have by executing the data you're interested in and trace the TSQL generated using profiler.
I kind of like to think that MS engineers know how SQL server work and, it will generate TSQL that works on all items you can work with using the version on SSMS you are using so it's quite good on a large variety releases prerviouse, current and future.
And remember, don't just copy, try to understand it as well else you might end up with the wrong solution.
Walter
This approaches uses string concatenation to produce a statement with all tables and their counts dynamically, like the example(s) given in the original question:
SELECT COUNT(*) AS Count,'[dbo].[tbl1]' AS TableName FROM [dbo].[tbl1]
UNION ALL SELECT COUNT(*) AS Count,'[dbo].[tbl2]' AS TableName FROM [dbo].[tbl2]
UNION ALL SELECT...
Finally this is executed with EXEC:
DECLARE #cmd VARCHAR(MAX)=STUFF(
(
SELECT 'UNION ALL SELECT COUNT(*) AS Count,'''
+ QUOTENAME(t.TABLE_SCHEMA) + '.' + QUOTENAME(t.TABLE_NAME)
+ ''' AS TableName FROM ' + QUOTENAME(t.TABLE_SCHEMA) + '.' + QUOTENAME(t.TABLE_NAME)
FROM INFORMATION_SCHEMA.TABLES AS t
WHERE TABLE_TYPE='BASE TABLE'
FOR XML PATH('')
),1,10,'');
EXEC(#cmd);
The first thing that came to mind was to use sp_msForEachTable
exec sp_msforeachtable 'select count(*) from ?'
that does not list the table names though, so it can be extended to
exec sp_msforeachtable 'select parsename(''?'', 1), count(*) from ?'
The problem here is that if the database has more than 100 tables you will get the following error message:
The query has exceeded the maximum
number of result sets that can be
displayed in the results grid. Only
the first 100 result sets are
displayed in the grid.
So I ended up using table variable to store the results
declare #stats table (n sysname, c int)
insert into #stats
exec sp_msforeachtable 'select parsename(''?'', 1), count(*) from ?'
select
*
from #stats
order by c desc
Fastest way to find row count of all tables in SQL Refreence (http://www.codeproject.com/Tips/811017/Fastest-way-to-find-row-count-of-all-tables-in-SQL)
SELECT T.name AS [TABLE NAME], I.rows AS [ROWCOUNT]
FROM sys.tables AS T
INNER JOIN sys.sysindexes AS I ON T.object_id = I.id
AND I.indid < 2
ORDER BY I.rows DESC
I want to share what's working for me
SELECT
QUOTENAME(SCHEMA_NAME(sOBJ.schema_id)) + '.' + QUOTENAME(sOBJ.name) AS [TableName]
, SUM(sdmvPTNS.row_count) AS [RowCount]
FROM
sys.objects AS sOBJ
INNER JOIN sys.dm_db_partition_stats AS sdmvPTNS
ON sOBJ.object_id = sdmvPTNS.object_id
WHERE
sOBJ.type = 'U'
AND sOBJ.is_ms_shipped = 0x0
AND sdmvPTNS.index_id < 2
GROUP BY
sOBJ.schema_id
, sOBJ.name
ORDER BY [TableName]
GO
The database is hosted in Azure and the final result is:
Credit: https://www.mssqltips.com/sqlservertip/2537/sql-server-row-count-for-all-tables-in-a-database/
Here is my take on this question. It contains all schemas and lists only tables with rows. YMMV
select distinct schema_name(t.schema_id) as schema_name, t.name as
table_name, p.[Rows]
from sys.tables as t
INNER JOIN sys.indexes as i ON t.OBJECT_ID = i.object_id
INNER JOIN sys.partitions p ON i.object_id = p.OBJECT_ID AND i.index_id =
p.index_id
where p.[Rows] > 0
order by schema_name;
If you use MySQL >4.x you can use this:
select TABLE_NAME, TABLE_ROWS from information_schema.TABLES where TABLE_SCHEMA="test";
Keep in mind that for some storage engines, TABLE_ROWS is an approximation.
The accepted answer didn't work for me on Azure SQL, here's one that did, it's super fast and did exactly what I wanted:
select t.name, s.row_count
from sys.tables t
join sys.dm_db_partition_stats s
ON t.object_id = s.object_id
and t.type_desc = 'USER_TABLE'
and t.name not like '%dss%'
and s.index_id = 1
order by s.row_count desc
You could try this:
SELECT OBJECT_SCHEMA_NAME(ps.object_Id) AS [schemaname],
OBJECT_NAME(ps.object_id) AS [tablename],
row_count AS [rows]
FROM sys.dm_db_partition_stats ps
WHERE OBJECT_SCHEMA_NAME(ps.object_Id) <> 'sys' AND ps.index_id < 2
ORDER BY
OBJECT_SCHEMA_NAME(ps.object_Id),
OBJECT_NAME(ps.object_id)
This sql script gives the schema, table name and row count of each table in a database selected:
SELECT SCHEMA_NAME(schema_id) AS [SchemaName],
[Tables].name AS [TableName],
SUM([Partitions].[rows]) AS [TotalRowCount]
FROM sys.tables AS [Tables]
JOIN sys.partitions AS [Partitions]
ON [Tables].[object_id] = [Partitions].[object_id]
AND [Partitions].index_id IN ( 0, 1 )
-- WHERE [Tables].name = N'name of the table'
GROUP BY SCHEMA_NAME(schema_id), [Tables].name
order by [TotalRowCount] desc
Ref: https://blog.sqlauthority.com/2017/05/24/sql-server-find-row-count-every-table-database-efficiently/
Another way of doing this:
SELECT o.NAME TABLENAME,
i.rowcnt
FROM sysindexes AS i
INNER JOIN sysobjects AS o ON i.id = o.id
WHERE i.indid < 2 AND OBJECTPROPERTY(o.id, 'IsMSShipped') = 0
ORDER BY i.rowcnt desc
I think that the shortest, fastest and simplest way would be:
SELECT
object_name(object_id) AS [Table],
SUM(row_count) AS [Count]
FROM
sys.dm_db_partition_stats
WHERE
--object_schema_name(object_id) = 'dbo' AND
index_id < 2
GROUP BY
object_id
USE DatabaseName
CREATE TABLE #counts
(
table_name varchar(255),
row_count int
)
EXEC sp_MSForEachTable #command1='INSERT #counts (table_name, row_count) SELECT ''?'', COUNT(*) FROM ?'
SELECT table_name, row_count FROM #counts ORDER BY table_name, row_count DESC
DROP TABLE #counts
From this question:
https://dba.stackexchange.com/questions/114958/list-all-tables-from-all-user-databases/230411#230411
I added record count to the answer provided by #Aaron Bertrand that lists all databases and all tables.
DECLARE #src NVARCHAR(MAX), #sql NVARCHAR(MAX);
SELECT #sql = N'', #src = N' UNION ALL
SELECT ''$d'' as ''database'',
s.name COLLATE SQL_Latin1_General_CP1_CI_AI as ''schema'',
t.name COLLATE SQL_Latin1_General_CP1_CI_AI as ''table'' ,
ind.rows as record_count
FROM [$d].sys.schemas AS s
INNER JOIN [$d].sys.tables AS t ON s.[schema_id] = t.[schema_id]
INNER JOIN [$d].sys.sysindexes AS ind ON t.[object_id] = ind.[id]
where ind.indid < 2';
SELECT #sql = #sql + REPLACE(#src, '$d', name)
FROM sys.databases
WHERE database_id > 4
AND [state] = 0
AND HAS_DBACCESS(name) = 1;
SET #sql = STUFF(#sql, 1, 10, CHAR(13) + CHAR(10));
PRINT #sql;
--EXEC sys.sp_executesql #sql;
You can copy, past and execute this piece of code to get all table record counts into a table. Note: Code is commented with instructions
create procedure RowCountsPro
as
begin
--drop the table if exist on each exicution
IF OBJECT_ID (N'dbo.RowCounts', N'U') IS NOT NULL
DROP TABLE dbo.RowCounts;
-- creating new table
CREATE TABLE RowCounts
( [TableName] VARCHAR(150)
, [RowCount] INT
, [Reserved] NVARCHAR(50)
, [Data] NVARCHAR(50)
, [Index_Size] NVARCHAR(50)
, [UnUsed] NVARCHAR(50))
--inserting all records
INSERT INTO RowCounts([TableName], [RowCount],[Reserved],[Data],[Index_Size],[UnUsed])
-- "sp_MSforeachtable" System Procedure, 'sp_spaceused "?"' param to get records and resources used
EXEC sp_MSforeachtable 'sp_spaceused "?"'
-- selecting data and returning a table of data
SELECT [TableName], [RowCount],[Reserved],[Data],[Index_Size],[UnUsed]
FROM RowCounts
ORDER BY [TableName]
end
I have tested this code and it works fine on SQL Server 2014.
SELECT ( Schema_name(A.schema_id) + '.' + A.NAME ) AS TableName,
Sum(B.rows)AS RecordCount
FROM sys.objects A INNER JOIN sys.partitions B
ON A.object_id = B.object_id WHERE A.type = 'U'
GROUP BY A.schema_id,A.NAME ;
QUERY_PHOTO
QUERY_RESULT_PHOTO
Shnugo's answer is the ONLY one that works in Azure with Externa Tables. (1) Azure SQL doesn't support sp_MSforeachtable at all and (2) rows in sys.partitions for an External table is always 0.
select T.object_id, T.name, I.indid, I.rows
from Sys.tables T
left join Sys.sysindexes I
on (I.id = T.object_id and (indid =1 or indid =0 ))
where T.type='U'
Here indid=1 means a CLUSTERED index and indid=0 is a HEAP
I am looking for a t-sql script which can list the databases and and the respective roles/privileges mapped for a particular user. Using SQL Server 2008 R2.
CREATE TABLE #tempww (
LoginName nvarchar(max),
DBname nvarchar(max),
Username nvarchar(max),
AliasName nvarchar(max)
)
INSERT INTO #tempww
EXEC master..sp_msloginmappings
-- display results
SELECT *
FROM #tempww
ORDER BY dbname, username
-- cleanup
DROP TABLE #tempww
CREATE TABLE #tempww (
LoginName nvarchar(max),
DBname nvarchar(max),
Username nvarchar(max),
AliasName nvarchar(max)
)
INSERT INTO #tempww
EXEC master..sp_msloginmappings
-- display results
declare #col varchar(1000)
declare #sql varchar(2000)
select #col = COALESCE(#col + ', ','') + QUOTENAME(DBname)
from #tempww Group by DBname
Set #sql='select * from (select LoginName,Username,AliasName,DBname,row_number() over(order by (select 0)) rn from #tempww) src
PIVOT (Max(rn) FOR DBname
IN ('+#col+')) pvt'
EXEC(#sql)
-- cleanup
DROP TABLE #tempww
I wrote a little query to find permission of a user on a specific database.
SELECT * FROM
(
SELECT
perm.permission_name AS 'PERMISSION'
,perm.state_desc AS 'RIGHT'
,perm.class_desc AS 'RIGHT_ON'
,p.NAME AS 'GRANTEE'
,m.NAME AS 'USERNAME'
,s.name AS 'SCHEMA'
,o.name AS 'OBJECT'
,IIF(perm.class = 0, db_name(), NULL) AS 'DATABASE'
FROM
sys.database_permissions perm
INNER JOIN sys.database_principals p ON p.principal_id = perm.grantee_principal_id
LEFT JOIN sys.database_role_members rm ON rm.role_principal_id = p.principal_id
LEFT JOIN sys.database_principals m ON rm.member_principal_id = m.principal_id
LEFT JOIN sys.schemas s ON perm.class = 3 AND perm.major_id = s.schema_id
LEFT JOIN sys.objects AS o ON perm.class = 1 AND perm.major_id = o.object_id
UNION ALL
SELECT
perm.permission_name AS 'PERMISSION'
,perm.state_desc AS 'RIGHT'
,perm.class_desc AS 'RIGHT_ON'
,'SELF-GRANTED' AS 'GRANTEE'
,p.NAME AS 'USERNAME'
,s.name AS 'SCHEMA'
,o.name AS 'OBJECT'
,IIF(perm.class = 0, db_name(), NULL) AS 'DATABASE'
FROM
sys.database_permissions perm
INNER JOIN sys.database_principals p ON p.principal_id = perm.grantee_principal_id
LEFT JOIN sys.schemas s ON perm.class = 3 AND perm.major_id = s.schema_id
LEFT JOIN sys.objects AS o ON perm.class = 1 AND perm.major_id = o.object_id
) AS [union]
WHERE [union].USERNAME = 'Username' -- Username you will search for
ORDER BY [union].RIGHT_ON, [union].PERMISSION, [union].GRANTEE
The permissions of fixed database roles do not appear in sys.database_permissions. Therefore, database principals may have additional permissions not listed here.
I does not prefer
EXECUTE AS USER = 'userName';
SELECT * FROM fn_my_permissions(NULL, 'DATABASE')
Because it's just retrieving which permissions the user has not where they come from!
Maybe i find out how to join the fixed database roles permission granted for the user one day...
Pls enjoy Life and hate the Users :D
Stole this from here. I found it very useful!
DECLARE #DB_USers TABLE
(DBName sysname, UserName sysname, LoginType sysname, AssociatedRole varchar(max),create_date datetime,modify_date datetime)
INSERT #DB_USers
EXEC sp_MSforeachdb
'
use [?]
SELECT ''?'' AS DB_Name,
case prin.name when ''dbo'' then prin.name + '' (''+ (select SUSER_SNAME(owner_sid) from master.sys.databases where name =''?'') + '')'' else prin.name end AS UserName,
prin.type_desc AS LoginType,
isnull(USER_NAME(mem.role_principal_id),'''') AS AssociatedRole ,create_date,modify_date
FROM sys.database_principals prin
LEFT OUTER JOIN sys.database_role_members mem ON prin.principal_id=mem.member_principal_id
WHERE prin.sid IS NOT NULL and prin.sid NOT IN (0x00) and
prin.is_fixed_role <> 1 AND prin.name NOT LIKE ''##%'''
SELECT
dbname,username ,logintype ,create_date ,modify_date ,
STUFF(
(
SELECT ',' + CONVERT(VARCHAR(500),associatedrole)
FROM #DB_USers user2
WHERE
user1.DBName=user2.DBName AND user1.UserName=user2.UserName
FOR XML PATH('')
)
,1,1,'') AS Permissions_user
FROM #DB_USers user1
GROUP BY
dbname,username ,logintype ,create_date ,modify_date
ORDER BY DBName,username
using fn_my_permissions
EXECUTE AS USER = 'userName';
SELECT * FROM fn_my_permissions(NULL, 'DATABASE')
Is this the kind of thing you want?
You might want to extend it to get more info out of the sys tables.
use master
DECLARE #name VARCHAR(50) -- database name
DECLARE db_cursor CURSOR FOR
select name from sys.databases
OPEN db_cursor
FETCH NEXT FROM db_cursor INTO #name
WHILE ##FETCH_STATUS = 0
BEGIN
print #name
exec('USE ' + #name + '; select rp.name, mp.name from sys.database_role_members drm
join sys.database_principals rp on (drm.role_principal_id = rp.principal_id)
join sys.database_principals mp on (drm.member_principal_id = mp.principal_id)')
FETCH NEXT FROM db_cursor INTO #name
END
CLOSE db_cursor
DEALLOCATE db_cursor
Did you sort this? I just found this code here:
http://www.pythian.com/news/29665/httpconsultingblogs-emc-comjamiethomsonarchive20070209sql-server-2005_3a00_-view-all-permissions-_2800_2_2900_-aspx/
I think I'll need to do a bit of tweaking, but essentially this has sorted it for me!
I hope it does for you too!
J
I have created a procedure which will output the INSERT script for a given table name. And in the procedure I am using this code:
DECLARE #owner VARCHAR(20) ,
#Database VARCHAR(50)
SELECT #owner = 'dbo' ,
#Database = 'Asmin'
SELECT sc.name
FROM sysobjects so
INNER JOIN syscolumns sc ON so.id = sc.id
INNER JOIN systypes st ON sc.xtype = st.xusertype
WHERE so.Name = 'Acisd'
But the problem I see is the procedure is in collection database and the table Acisd is in different database. So it's returning me nothing when I execute procedure.
How to fix this?
Not quite sure what you're going for here, but you could point this whole statement to the other database by fully qualifying the table references.
SELECT sc.name
FROM OtherDatabase.dbo.sysobjects so
INNER JOIN OtherDatabase.dbo.syscolumns sc ON so.id = sc.id
INNER JOIN OtherDatabase.dbo.systypes st ON sc.xtype = st.xusertype
WHERE so.Name = 'Acisd'
To do this inside a stored procedure you need to use dynamic SQL. For example:
declare #sql nvarchar(max);
set #sql = N'SELECT sc.name
FROM ' + quotename(#dbanme) + N'.sys.objects so
INNER JOIN ' + quotename(#dbname) + N'sys.columns sc ON so.id = sc.id
INNER JOIN ' + quotename(#dbname) + N'sys.types st ON sc.xtype = st.xusertype
WHERE so.Name = #objectName';
exec sp_executesql #sql, N'#objectName sysname', #objectName;
In sybase there is function db_name() to ktakeout current database ... not sure about sqlserver
In MySQL there is a "Use" clause, which can precede any select statement. I believe this is also the case in SQL - Server.
As previus said the most easy way to do it is to simply start by
USE [otherDatabasename]
GO
DECLARE #owner VARCHAR(20) ,
#Database VARCHAR(50)
SELECT #owner = 'dbo' ,
#Database = 'Asmin'
SELECT sc.name
FROM sysobjects so
INNER JOIN syscolumns sc ON so.id = sc.id
INNER JOIN systypes st ON sc.xtype = st.xusertype
WHERE so.Name = 'Acisd'
How to list row count of each table in the database. Some equivalent of
select count(*) from table1
select count(*) from table2
...
select count(*) from tableN
I will post a solution but other approaches are welcome
If you're using SQL Server 2005 and up, you can also use this:
SELECT
t.NAME AS TableName,
i.name as indexName,
p.[Rows],
sum(a.total_pages) as TotalPages,
sum(a.used_pages) as UsedPages,
sum(a.data_pages) as DataPages,
(sum(a.total_pages) * 8) / 1024 as TotalSpaceMB,
(sum(a.used_pages) * 8) / 1024 as UsedSpaceMB,
(sum(a.data_pages) * 8) / 1024 as DataSpaceMB
FROM
sys.tables t
INNER JOIN
sys.indexes i ON t.OBJECT_ID = i.object_id
INNER JOIN
sys.partitions p ON i.object_id = p.OBJECT_ID AND i.index_id = p.index_id
INNER JOIN
sys.allocation_units a ON p.partition_id = a.container_id
WHERE
t.NAME NOT LIKE 'dt%' AND
i.OBJECT_ID > 255 AND
i.index_id <= 1
GROUP BY
t.NAME, i.object_id, i.index_id, i.name, p.[Rows]
ORDER BY
object_name(i.object_id)
In my opinion, it's easier to handle than the sp_msforeachtable output.
A snippet I found at http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=21021 that helped me:
select t.name TableName, i.rows Records
from sysobjects t, sysindexes i
where t.xtype = 'U' and i.id = t.id and i.indid in (0,1)
order by TableName;
To get that information in SQL Management Studio, right click on the database, then select Reports --> Standard Reports --> Disk Usage by Table.
SELECT
T.NAME AS 'TABLE NAME',
P.[ROWS] AS 'NO OF ROWS'
FROM SYS.TABLES T
INNER JOIN SYS.PARTITIONS P ON T.OBJECT_ID=P.OBJECT_ID;
As seen here, this will return correct counts, where methods using the meta data tables will only return estimates.
CREATE PROCEDURE ListTableRowCounts
AS
BEGIN
SET NOCOUNT ON
CREATE TABLE #TableCounts
(
TableName VARCHAR(500),
CountOf INT
)
INSERT #TableCounts
EXEC sp_msForEachTable
'SELECT PARSENAME(''?'', 1),
COUNT(*) FROM ? WITH (NOLOCK)'
SELECT TableName , CountOf
FROM #TableCounts
ORDER BY TableName
DROP TABLE #TableCounts
END
GO
sp_MSForEachTable 'DECLARE #t AS VARCHAR(MAX);
SELECT #t = CAST(COUNT(1) as VARCHAR(MAX))
+ CHAR(9) + CHAR(9) + ''?'' FROM ? ; PRINT #t'
Output:
Well luckily SQL Server management studio gives you a hint on how to do this.
Do this,
start a SQL Server trace and open the activity you are doing (filter
by your login ID if you're not alone and set the application Name
to Microsoft SQL Server Management Studio), pause the trace and discard any results you have recorded till now;
Then, right click a table and select property from the pop up menu;
start the trace again;
Now in SQL Server Management studio select the storage property item on the left;
Pause the trace and have a look at what TSQL is generated by microsoft.
In the probably last query you will see a statement starting with exec sp_executesql N'SELECT
when you copy the executed code to visual studio you will notice that this code generates all the data the engineers at microsoft used to populate the property window.
when you make moderate modifications to that query you will get to something like this:
SELECT
SCHEMA_NAME(tbl.schema_id)+'.'+tbl.name as [table], --> something I added
p.partition_number AS [PartitionNumber],
prv.value AS [RightBoundaryValue],
fg.name AS [FileGroupName],
CAST(pf.boundary_value_on_right AS int) AS [RangeType],
CAST(p.rows AS float) AS [RowCount],
p.data_compression AS [DataCompression]
FROM sys.tables AS tbl
INNER JOIN sys.indexes AS idx ON idx.object_id = tbl.object_id and idx.index_id < 2
INNER JOIN sys.partitions AS p ON p.object_id=CAST(tbl.object_id AS int) AND p.index_id=idx.index_id
LEFT OUTER JOIN sys.destination_data_spaces AS dds ON dds.partition_scheme_id = idx.data_space_id and dds.destination_id = p.partition_number
LEFT OUTER JOIN sys.partition_schemes AS ps ON ps.data_space_id = idx.data_space_id
LEFT OUTER JOIN sys.partition_range_values AS prv ON prv.boundary_id = p.partition_number and prv.function_id = ps.function_id
LEFT OUTER JOIN sys.filegroups AS fg ON fg.data_space_id = dds.data_space_id or fg.data_space_id = idx.data_space_id
LEFT OUTER JOIN sys.partition_functions AS pf ON pf.function_id = prv.function_id
Now the query is not perfect and you could update it to meet other questions you might have, the point is, you can use the knowledge of microsoft to get to most of the questions you have by executing the data you're interested in and trace the TSQL generated using profiler.
I kind of like to think that MS engineers know how SQL server work and, it will generate TSQL that works on all items you can work with using the version on SSMS you are using so it's quite good on a large variety releases prerviouse, current and future.
And remember, don't just copy, try to understand it as well else you might end up with the wrong solution.
Walter
This approaches uses string concatenation to produce a statement with all tables and their counts dynamically, like the example(s) given in the original question:
SELECT COUNT(*) AS Count,'[dbo].[tbl1]' AS TableName FROM [dbo].[tbl1]
UNION ALL SELECT COUNT(*) AS Count,'[dbo].[tbl2]' AS TableName FROM [dbo].[tbl2]
UNION ALL SELECT...
Finally this is executed with EXEC:
DECLARE #cmd VARCHAR(MAX)=STUFF(
(
SELECT 'UNION ALL SELECT COUNT(*) AS Count,'''
+ QUOTENAME(t.TABLE_SCHEMA) + '.' + QUOTENAME(t.TABLE_NAME)
+ ''' AS TableName FROM ' + QUOTENAME(t.TABLE_SCHEMA) + '.' + QUOTENAME(t.TABLE_NAME)
FROM INFORMATION_SCHEMA.TABLES AS t
WHERE TABLE_TYPE='BASE TABLE'
FOR XML PATH('')
),1,10,'');
EXEC(#cmd);
The first thing that came to mind was to use sp_msForEachTable
exec sp_msforeachtable 'select count(*) from ?'
that does not list the table names though, so it can be extended to
exec sp_msforeachtable 'select parsename(''?'', 1), count(*) from ?'
The problem here is that if the database has more than 100 tables you will get the following error message:
The query has exceeded the maximum
number of result sets that can be
displayed in the results grid. Only
the first 100 result sets are
displayed in the grid.
So I ended up using table variable to store the results
declare #stats table (n sysname, c int)
insert into #stats
exec sp_msforeachtable 'select parsename(''?'', 1), count(*) from ?'
select
*
from #stats
order by c desc
Fastest way to find row count of all tables in SQL Refreence (http://www.codeproject.com/Tips/811017/Fastest-way-to-find-row-count-of-all-tables-in-SQL)
SELECT T.name AS [TABLE NAME], I.rows AS [ROWCOUNT]
FROM sys.tables AS T
INNER JOIN sys.sysindexes AS I ON T.object_id = I.id
AND I.indid < 2
ORDER BY I.rows DESC
I want to share what's working for me
SELECT
QUOTENAME(SCHEMA_NAME(sOBJ.schema_id)) + '.' + QUOTENAME(sOBJ.name) AS [TableName]
, SUM(sdmvPTNS.row_count) AS [RowCount]
FROM
sys.objects AS sOBJ
INNER JOIN sys.dm_db_partition_stats AS sdmvPTNS
ON sOBJ.object_id = sdmvPTNS.object_id
WHERE
sOBJ.type = 'U'
AND sOBJ.is_ms_shipped = 0x0
AND sdmvPTNS.index_id < 2
GROUP BY
sOBJ.schema_id
, sOBJ.name
ORDER BY [TableName]
GO
The database is hosted in Azure and the final result is:
Credit: https://www.mssqltips.com/sqlservertip/2537/sql-server-row-count-for-all-tables-in-a-database/
Here is my take on this question. It contains all schemas and lists only tables with rows. YMMV
select distinct schema_name(t.schema_id) as schema_name, t.name as
table_name, p.[Rows]
from sys.tables as t
INNER JOIN sys.indexes as i ON t.OBJECT_ID = i.object_id
INNER JOIN sys.partitions p ON i.object_id = p.OBJECT_ID AND i.index_id =
p.index_id
where p.[Rows] > 0
order by schema_name;
If you use MySQL >4.x you can use this:
select TABLE_NAME, TABLE_ROWS from information_schema.TABLES where TABLE_SCHEMA="test";
Keep in mind that for some storage engines, TABLE_ROWS is an approximation.
The accepted answer didn't work for me on Azure SQL, here's one that did, it's super fast and did exactly what I wanted:
select t.name, s.row_count
from sys.tables t
join sys.dm_db_partition_stats s
ON t.object_id = s.object_id
and t.type_desc = 'USER_TABLE'
and t.name not like '%dss%'
and s.index_id = 1
order by s.row_count desc
You could try this:
SELECT OBJECT_SCHEMA_NAME(ps.object_Id) AS [schemaname],
OBJECT_NAME(ps.object_id) AS [tablename],
row_count AS [rows]
FROM sys.dm_db_partition_stats ps
WHERE OBJECT_SCHEMA_NAME(ps.object_Id) <> 'sys' AND ps.index_id < 2
ORDER BY
OBJECT_SCHEMA_NAME(ps.object_Id),
OBJECT_NAME(ps.object_id)
This sql script gives the schema, table name and row count of each table in a database selected:
SELECT SCHEMA_NAME(schema_id) AS [SchemaName],
[Tables].name AS [TableName],
SUM([Partitions].[rows]) AS [TotalRowCount]
FROM sys.tables AS [Tables]
JOIN sys.partitions AS [Partitions]
ON [Tables].[object_id] = [Partitions].[object_id]
AND [Partitions].index_id IN ( 0, 1 )
-- WHERE [Tables].name = N'name of the table'
GROUP BY SCHEMA_NAME(schema_id), [Tables].name
order by [TotalRowCount] desc
Ref: https://blog.sqlauthority.com/2017/05/24/sql-server-find-row-count-every-table-database-efficiently/
Another way of doing this:
SELECT o.NAME TABLENAME,
i.rowcnt
FROM sysindexes AS i
INNER JOIN sysobjects AS o ON i.id = o.id
WHERE i.indid < 2 AND OBJECTPROPERTY(o.id, 'IsMSShipped') = 0
ORDER BY i.rowcnt desc
I think that the shortest, fastest and simplest way would be:
SELECT
object_name(object_id) AS [Table],
SUM(row_count) AS [Count]
FROM
sys.dm_db_partition_stats
WHERE
--object_schema_name(object_id) = 'dbo' AND
index_id < 2
GROUP BY
object_id
USE DatabaseName
CREATE TABLE #counts
(
table_name varchar(255),
row_count int
)
EXEC sp_MSForEachTable #command1='INSERT #counts (table_name, row_count) SELECT ''?'', COUNT(*) FROM ?'
SELECT table_name, row_count FROM #counts ORDER BY table_name, row_count DESC
DROP TABLE #counts
From this question:
https://dba.stackexchange.com/questions/114958/list-all-tables-from-all-user-databases/230411#230411
I added record count to the answer provided by #Aaron Bertrand that lists all databases and all tables.
DECLARE #src NVARCHAR(MAX), #sql NVARCHAR(MAX);
SELECT #sql = N'', #src = N' UNION ALL
SELECT ''$d'' as ''database'',
s.name COLLATE SQL_Latin1_General_CP1_CI_AI as ''schema'',
t.name COLLATE SQL_Latin1_General_CP1_CI_AI as ''table'' ,
ind.rows as record_count
FROM [$d].sys.schemas AS s
INNER JOIN [$d].sys.tables AS t ON s.[schema_id] = t.[schema_id]
INNER JOIN [$d].sys.sysindexes AS ind ON t.[object_id] = ind.[id]
where ind.indid < 2';
SELECT #sql = #sql + REPLACE(#src, '$d', name)
FROM sys.databases
WHERE database_id > 4
AND [state] = 0
AND HAS_DBACCESS(name) = 1;
SET #sql = STUFF(#sql, 1, 10, CHAR(13) + CHAR(10));
PRINT #sql;
--EXEC sys.sp_executesql #sql;
You can copy, past and execute this piece of code to get all table record counts into a table. Note: Code is commented with instructions
create procedure RowCountsPro
as
begin
--drop the table if exist on each exicution
IF OBJECT_ID (N'dbo.RowCounts', N'U') IS NOT NULL
DROP TABLE dbo.RowCounts;
-- creating new table
CREATE TABLE RowCounts
( [TableName] VARCHAR(150)
, [RowCount] INT
, [Reserved] NVARCHAR(50)
, [Data] NVARCHAR(50)
, [Index_Size] NVARCHAR(50)
, [UnUsed] NVARCHAR(50))
--inserting all records
INSERT INTO RowCounts([TableName], [RowCount],[Reserved],[Data],[Index_Size],[UnUsed])
-- "sp_MSforeachtable" System Procedure, 'sp_spaceused "?"' param to get records and resources used
EXEC sp_MSforeachtable 'sp_spaceused "?"'
-- selecting data and returning a table of data
SELECT [TableName], [RowCount],[Reserved],[Data],[Index_Size],[UnUsed]
FROM RowCounts
ORDER BY [TableName]
end
I have tested this code and it works fine on SQL Server 2014.
SELECT ( Schema_name(A.schema_id) + '.' + A.NAME ) AS TableName,
Sum(B.rows)AS RecordCount
FROM sys.objects A INNER JOIN sys.partitions B
ON A.object_id = B.object_id WHERE A.type = 'U'
GROUP BY A.schema_id,A.NAME ;
QUERY_PHOTO
QUERY_RESULT_PHOTO
Shnugo's answer is the ONLY one that works in Azure with Externa Tables. (1) Azure SQL doesn't support sp_MSforeachtable at all and (2) rows in sys.partitions for an External table is always 0.
select T.object_id, T.name, I.indid, I.rows
from Sys.tables T
left join Sys.sysindexes I
on (I.id = T.object_id and (indid =1 or indid =0 ))
where T.type='U'
Here indid=1 means a CLUSTERED index and indid=0 is a HEAP