I downloaded the newest version of Eclipse on an M1 Macbook Pro.
I downloaded the plugin from the Eclipse Marketplace. It's version 6.0
I made a new project, and when I get to the "finish" screen, I get this error:
Then, if I click finish again I get this error, which is the error that keeps showing up no matter how many times I click finish:
Some stuff ends up actually getting built in the project:
My professor doesn't know how to fix it, and there's nothing on Google. How can I make this work normally like it's supposed to? Thanks :)
The plugin is no longer supported for newer versions of Eclipse as we migrated to maven a while back.
You have two options
Use an old Intel version of Eclipse that predated the change to work with a legacy project.
Migrate the project to a Maven project which will work with all IDEs and doesn't use the plugin at all.
Related
I have a ploblem during the installation of Codename One plugin in Netbeans.
After the installation it says to restart the IDE.
After IDE restarts it's like if I've never installed the plugin: it asks me to install from the beginning.
NetBeans 12 on Windows 10 Pro.
NetBeans 12 changed a lot about the way plugins should be built and our plugin is a bit out of date by now.
However, we won't be updating it since it's no longer necessary as we migrated to maven. You can learn about that here: https://www.codenameone.com/blog/moving-to-maven.html
Hello dear Eclipse developer,
I am already pretty desperate about figuring out the following problem, and maybe you can be part of the solution.
So heres the Context:
I want to develop an application for a Nucleo STM32F401RE Microprocessor Developmentboard.
To do so i need to set up the Eclipse Oxygen 3 IDE for my Windows XP x86 OS as descriped in this guide:
https://www.carminenoviello.com/2014/12/28/setting-gcceclipse-toolchain-stm32nucleo-part-1/
In short:
Install Eclipse Oxygen 3
Install C/C++ Development Tools
Install the GNU ARM plug-ins for Eclipse
Install the GCC ARM tool-chain
Install the Build Tools
Install the ST Link drivers for STM32Nucleo board
Every Step worked as expected and as descriped in the guide so far.
The next step is creating a test project, so I followed the project creation wizard for c/c++ projects in eclipse, which worked fine as well until i reached the very last step of the project creation wizard.
The last step wants me to select the path to the used Cross GNU ARM Toolchain which has already been installed in previous steps of the guide.
So i filled up the form fields, but the "Finish" and the "Next" Button stays greyed out! The "Back" Button is not working as well, so i literally cant do anything in this dialog field anymore, but cancel the project creating.
Someone went through this before and has an idea what the problem is and how to fix it?
Is it a bugg in eclipse?
Did i do something wrong ?
I've taken an Image to show what the problem is:
Thanks for your attention, dear developer. Good answers will make me a fan of yours.
UPDATE
Starting Eclipse with the errorlog console brought the following error when starting the project creation Wizard:
Managed Build system manifest file error: Duplicate identifier ilg.gnuarmeclipse.managedBuild.cross.toolchain.lib.release for element type ToolChain
This is the first time i get in touch with eclipse.
Can someone explain what this means and how to get rid of it?
I'm using Eclipse Photon and tried the installation through marketplace and manual installation of versions 4.4.1 and 4.3.3 but I'm still experiencing the same issue than you.
The solution was to uninstall Eclipse Photon and install Eclipse Oxygen 3a. Now the project creation works properly.
Regards.
I had the same experience for my first eclipse project. After checking the installation of plugins in the Eclipse IDE, I found there are two versions of GNU MCU C/C++ (...) installed. The problem solved by uninstalling one of them. Hopes that could help someone later. I spend the whole day to solve the problem! lol
Uninstalling GNU MCU does the trick and soled the issue.
I have Eclipse for java on my laptop aswell as the most recent jdk and jre, all of this works fine. I have recently started C programming and downloaded the C version of eclipse. I then copied the file from downloads to my own directory. The problem is that when I try and open eclipse the splash screen shows up for half a second then disappears, eclipse then doesnt open. How can I fix this? I have found people with similar problems but none of their solutions work for me.
Note: I also have the C compiler: Fortran, C and C++ for Windows downloaded in the same directory as my eclipse folder if that matters.
Try a couple of things.
Uninstall and reinstall Eclipse.
Make sure you have the latest version of Java and JDK. Eclipse needs Java to run.
Sometimes, having multiple versions of java can also cause problems so uninstall unnecessary and old versions of java.
Also make sure that Java Home location is added to the environmental path variable.
One of these solutions should fix the problem. Hope this helps :)
I am using Indigo on a Mac Pro (10.9.1). I updated to Java1.7 in order to run some updated Google Play Service samples. Under Installed JREs, JAVA7 is shown as the only and default choice, which points to the new Java path. But when I start Eclipse, it started complaining that "JRE version is 1.6.0; version 1.7.0 or later is needed to run Google plugin for Eclipse".
I tried to add the vm option in eclipse.ini, i.e. I added
-vm
/Library/Java/JavaVirtualMachines/jdk1.7.0_51.jdk/Contents/home/bin/java
above "-vmargs" as described here: http://wiki.eclipse.org/Eclipse.ini.
It doesn't make any difference though. Since then, I have uninstalled GPE from Eclipse and installed them again via "install new software" from https://dl.google.com/eclipse/plugin/3.7. Still the same problem. Under Google->App Engine, there is an error message "Failed to initialize App Engine SDK (path)". This points to appengine-java-sdk-1.8.9.
I have checked my Java version using all means I am aware of, i.e. from run Java -version, using Java's control panel, output from code... They all show I am using Java 1.7.0.51.
Any help is appreciated!
Edit: Google has provided a solution that works great. Add this argument in eclipse.ini
-vm
/Library/Java/JavaVirtualMachines/jdk1.7.0_WHATEVERTHESUFFIXIS/Contents/Home/jre/lib/server/libjvm.dylib
Make sure that eclipse Is compiling your project to 1.7 specifications. Even though you have 1.7 selected as your virtual machine, it might be compiling to 1.6. It's in the eclipse project settings
This is the error message I get:
Cannot complete the install because one or more required items could not be found.
Software being installed: Google App Engine Tools for Android 3.1.0.v201208080121-rel-r42 (com.google.gdt.eclipse.mobile.android.feature.feature.group 3.1.0.v201208080121-rel-r42)
I've tried numerous things including manually downloading the file from here and also I snooped around StackOverflow and I tried just moving all the plugins from the manual download into the plugins folder of my Eclipse. That didn't help me though because my perspective did not update with the plugins and I couldn't find the "Create New Web Application" option. I've also read some things about the XML file being wrong but I can't find it and those were for other Eclipse versions so I don't know if it applies to me.
I also tried excluding Google App Engine Tools for Android 3.1.0 but then it just says the next one in the list can't be found.
I'll be more than happy to provide anymore information. I am running Eclipse Juno 4.2 and Java 1.7 (I also have 1.6 installed though). I am using a Windows 7 PC. Thank you guys so much! I just want to code :[
I did not work for me with this URL: http://dl.google.com/eclipse/plugin/4.2
It worked with this one: http://dl.google.com/eclipse/plugin/3.8
I just changed 4.2 to 3.8.
I faced a similar problem I was downloading with 120 kb/s every time the download breaks down
when I moved to another place and downloaded the plugin with highest speed 400 kb/s It successfully downloaded and no problems found
You might think that issue is out of logic but that what I reached so far
Hope that Helps
I know this is a very old question but recently I found a solution to my problem so I am going to personally update the answer. For some reason, Eclipse Classic 4.2.2 Juno does not come with some of the required packages. After talking to some people, they recommended simply downloading Eclipse IDE for Java EE Developers which simply comes with most of the packages necessary. From there, it just worked!
My friend also mentioned you could try to manually download the packages on Eclipse Classic but that is far more of a hassle.
Hope this helps!