I have Python 3.10.7 with the follwing packgaes installed using pip install in command line:
behave 1.2.6
selenium 4.4.3
These have also been added to the packagelist of the project using the project config in pycharm
Also behave is in the systme path as well along with python.
I am trying to use the behave command but I am getting the following error:
behave : The term 'behave' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ behave features\myfeaturefile.feature
Following is my project directory:
Following is my project in pycharm:
I need help in fixing this problem as I am new to this tool. Thanks
First check if you have behave and python in the path variables.
Check if you can execute the below command
C:\demo>behave -h
If this does not return a list of help commands associated with behave, this means that behave is not in the path variables
Alternatively, you can check it via cmd using the "PATH" command. This will show you all the entries in the system path
C:\demo>PATH
PATH=C:\Program Files (x86)\Microsoft SDKs\Azure\CLI2\wbin;C:\Program Files\AdoptOpenJDK\jdk-11.0.11.9-hotspot\bin...
If behave or python are not in the path variables, you can set them using
set PATH=%PATH%;c:\PATH_TO_BEHAVE
NOTE: Setting path using cmd is only valid till the time the cmd window is open. Once you close it, the path variable will be rest to original values.
Behave, along with a few other .exe files is sitting in the:
C:\Users\chauhany\AppData\Roaming\Python\Python310\Scripts
As per your instructions #Manish Agarwal, I added the C:\Users\chauhany\AppData\Roaming\Python to the PATH from the command line and re-started the machine. But it didn't help. I then moved the behave.exe from the above location to my python 3.10 directory which is sitting in C:\Program Files\Python310 and python is in the system path, and restarted my machine again.
I then deleted and recreated my project with the new feature file (same directory structure).
If I now run the same command, that is, features\myfeaturefile.feature from
C:\Users\chauhany\PycharmProjects\martechBehaveProject>
I get a FileNotFound error
So I went to the folder where the file is actually sitting that is:
C:\Users\chauhany\PycharmProjects\martechBehaveProject\features\steps> and then re-ran the command and it worked.
I was under the impression that if you have just one feature file you don't have to specify the actual feature file and it can be run from anywhere in your project i.e., from any location which certainly is not correct.
Related
Here is the error when I type "hbase shell"
*:\hbase-2.5.0\hbase-config.cmd"' is not recognized as an internal or external command, operable program or batch file. \Java\jdk1.8.0_261\lib\tools.jar was unexpected at this time.
and here comes another error when I type "start-hbase.sh"
The file does not have an app associated with it for performing this action. please install and app or if already installed, create an association in the Default Apps setting page
Seems like you are on windows (correct me if I'm wrong).
Your first command seems to come from an installation issue. The shell can't seem to find hbase-config.cmd. Make sure you followed the installation instructions properly and everything is where it's supposed to be.
As for the second error, you can't run bourne shell files (.sh extension) on windows.
It would be best you link the tutorial/documentation you followed in your original question, and add more information about your directory structure.
I'm working with selenium. The script is in :
C:\Users\User\Desktop\Data Analytics Arg\Proyectos\datademia\Py_install\py_ejemplo.py . Venv is activated and chromedriver.exe is in C:\Users\User\Desktop\Data Analytics Arg\Proyectos\datademia\Py_install\chromedriver.exe
The script runs perfectly. Then I created an only .exe-file via terminal :
pyinstaller --add-data "chromedriver.exe;." --windowed --onefile py_ejemplo.py
Folders are created correctly (build and dist). The .exe file (py_ejemplo.exe) was created, but when I try to run it, I get this message:
I've been looking and still can't solve it... I've tried these solutions :
filenotfound
but didn't work for me...Could someone help me? I don´t know what's wrong...
Thanks in advance
I got the same problem but I was working with Firefox and geckodriver.
In my case, I copied the selenium folder from the virtual environment to the dist folder and it worked.
There are a few things you should ensure when packing a script with pyinstaller build with selenium web driver.
It may require to add driver executable when building. I.e. chromedriver.exe
It may also require to add some package files related to selenium such as getattributes.js file when building. It was required at my project.
pyinstaller will extract those files to temp folder in AppData for windows users. So in your code, your relative paths may require to be resolved with a sample function as below (if you are running your code in vs code or you are running through pyinstaller executable the paths should be resolved by function).
For item 1 and 2, you can use --add-binary and --add-data features of pyinstaller for each of them. It is also possible to do this in *.spec file with add-files list, following your first running of pyinstaller (see this explanation) I preferred command-line option as below.
pyinstaller ./app.py --onefile --noconsole --add-binary "./driver/chromedriver.exe;./driver" --add-data "C:\Users\YOUR_USER_NAME\.conda\pkgs\selenium-3.141.0-py38h2bbff1b_1000\Lib\site-packages\selenium\webdriver\remote;selenium\webdriver\remote"
For item 3, to resolve relative paths in your source code, you can use below function in related places (for example when accessing chromedriver.exe)
def resource_path(relative_path):
try:
base_path = sys._MEIPASS
except Exception:
base_path = os.path.dirname(__file__)
return os.path.join(base_path, relative_path)
Use above function once you need to access packaged executables and files in your source code. In below example, my chromedriver is inside driver folder in my workspace. But when it is accessed through pyinstaller executable, it will be extracted to temp folder in AppData, yet function will access it through sys._MEIPASS variable set by pyinstaller.
driver = webdriver.Chrome(executable_path = resource_path('./driver/chromedriver.exe'))
Hope it works.
I am using custom Nagios plugins for the first time and am running into this error when I create a service for the plugin.
(No output on stdout) stderr: execvp(/usr/local/nagios/libexec/check_load.py, ...) failed. errno is 2: No such file or directory
The plugin works when I run it on the command line, however does not work when it runs within Nagios.
I followed these steps to get the plugin into Nagios
https://assets.nagios.com/downloads/nagiosxi/docs/Managing-Plugins-in-Nagios-XI.pdf
Here is what it looks like in the Nagios UI
The plugin is in the correct path: /usr/local/nagios/libexec and the resource.cfg file has the same path within it.
I tried two separate plugins, both which work on the command line, and the result is the same error.
The error indicates the file location is incorrect, however the plugin is in the specified directory and runs with no errors within that directory.
I am totally stumped and appreciate any help.
For anyone reading this, I solved the problem.
The first time I added the plugin, I forgot to add the python extension. When I updated the already created plugin, Nagios still threw the error.
Once I completely deleted the plugin and re-created it the 'file not found', error went away.
I faced a similar issue when I was trying to add a custom plugin ( I had custom plugins in ruby and python ).
The issue was the missing shebang line at the start of the script (which determines the script's ability to be executed like a standalone executable).
For example, if you have a python plugin custom-plugin.py then make sure this script has shebang at the start of script #!/usr/bin/env python3. Also if you have other scripts (ruby, bash etc.) make sure to add the appropriate path at the start of your scripts.
Also, check the path for plugins Nagios version. For my setup path was /usr/local/nagios/libexec/ and make sure your custom plugin is executable and has correct ownership permissions.
Sample custom template I used :
define command {
command_name check_switch_health
command_line /usr/local/nagios/libexec/check_snmp.rb --host $HOSTADDRESS$ --model "$ARG1$" --community "$ARG2$"
}
The above workaround worked for me.
I'm here again with another case that is getting me out my mind.
So, this is happening, I'm trying to run an executable java class(.jar) as a Windows Service, and all my attempts failed so far. To make it a little easier, I turned my jar into a batch file, wich only executes the jar in background, here is the code:
start "" javaw -jar C:\LocalService.jar
The batch works fine. However I have tried to install this batch as a service by using the next line in cmd:
sc create "LocalService" binPath= "C:\LocalService.bat"
The Service installs correctly, but as soon as I try to start it, it pops up an error (The code error is 1053, says something about the service did not start correctly)
Also, I have try with a software called NSSM (non-sucking service manager) It installs fine too, but the service does not start either.
Do you guys know what am I missing?
By the way, I'm doing all this on Windows 7 Professional.
Thanks!
thanks for your comments
Both tools didnt work for me, sadly. However I was able to do it with a software called Java Service Wrapper. This is not a free software, so I needed to buy a license to get it to work.
The steps were simple:
1.-Create a folder with the name of the service, then inside add 4 folders: lib,bin,logs,conf
2.-On the lib folder you have to copy your jar and also the wrapper.jar and wrapper.dll (these last two are in the zip you download from the website)
3.-Copy 4 files to the bin folder: InstallApp-NT.bat.in, App.bat.in, UnintstallApp-NT.bat.in and wrapper.exe (this last one is the one that defines your license, if you can get a file wrapper.exe from somebody else who had paid a license it will work fine. These file also came in the zip from the website) Remove the .in from the batch files
4.-The most tricky step is this: You have to copy from the wrapper's folder called conf a file called wrapper.conf.in Remove the .in extension and edit it with a tex editor. The most important lines you have to edit are:
wrapper.java.command=C:\Program Files (x86)\Java\jre7\bin\java //Specify JRE Path. Will work with eviroment variable
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperJarApp //Choosing this class means your are using a .jar file to execute when the service starts
wrapper.java.classpath.1=C:\LocalService\lib\wrapper.jar //This one is constant.
wrapper.java.classpath.2=C:\LocalService\lib\LocalService.jar //This is the path to your executable jar
wrapper.java.library.path.1=C:\LocalService\lib //Path to your own lib folder (the you created at the begining)
wrapper.app.parameter.1=C:\LocalService\lib\LocalService.jar // again the path to your jar
Then just execute the InstallApp-NT.bat and start the service and your are done
It worked to me with absolute paths, however according to documentation it will work fine with relative path too.
This is how I solved my problem and I hope someone with the same issue will find this helpful
See you next time!
I tried typing the name of the bat file (makejar.bat) from the containing direcory from the command line. It gives several errors all containing "'javac' is not recognised as an internal or external command."
This sounds like a java class path problem.
You can find the instructions to set the java CLASSPATH on the following Oracle web page.
I suppose you are working on Windows, so make sure that your environment variables are properly set:
JAVA_HOME - points to a proper JDK installation
PATH - contains a references to JAVA_HOME, something like: **PATH;%JAVA_HOME%\bin**
This should do it! Make sure to restart the command line you are using after making changes to environment variables.
You can see how to set/add environment variables on windows here.
On CMD--> type--> PATH="c:\Program Files\Java\jdk1.8.0_144\bin";
and then check java path by type "java -version" on cmd
and also check on YouTube : -https://www.youtube.com/watch?v=mzAAmJj-W6w