I'm working on an old project that supports Windows Forms.
This project contains some ResourceManager for the support of a few localizations. The idea is that you call ResourceManager["SomeResource"] instead of Resource.SomeResource and it returns you a localized string.
And these localized strings are used in the code of the initialization of the form. For example, you have Form1, and in Form1.Design.cs there is some code like this:
Label label1 = new Label();
label1.Text = ResourceManager["SomeResource"];
So the label will be created with an already localized string in the Text.
And we need to add the functionality of changing the UI language without reloading the Form.
We can just set the every Text property of every controls again. But it's a lot of code, the form contains a lot of controls.
We can call the Form.InitializeComponents(), this method will recreate all controls with new localized strings, but in some cases, it works slowly because it reloads some big data again.
Is there some other way to refresh all UI controls and get the new localized strings? Do Windows Forms support some mechanism like Binding in the WPF to create the "connection" between the Text properties and localized resources?
I think that you can achieve this by use of Invalidate() either on the form itself or on a container control that your other controls may be encompassed by.
Related
I trying to see if its possible to load a form into a canvas or grid control in wpf with vb.net.
I'm not very familiar with WPF at all, usually working with Winforms more than anything else, however I need to take advantage of the far superior transparancy options offered by WPF for this current project, so need to see if I can crack this.
In Winforms, I'd normally have a panel (call it contentpanel or mainpanel etc) and then whenever I needed to I could easily load another form into that panel dynamically and keep everything neat and tidy in one form when presented to the user, so something like...
dim newforminstance as form1
newforminstance.toplevel = true
newforminstance.topmost = false
contentpanel.controls.add(newforminstance)
newforminstance.show
That works a treat in Winforms; Is there a similar way to achieve this functionality in WPF?
Thanks in advance.
I have made a FormBase, from which I inherit a FomBaseList and a FormBaseDetail.
All other forms in the project are derived from FormBaseList or FormBaseDetail.
Now it seems that VS has huge problems with that, and my biggest problem is that VS keeps writing property values from the Ancestor form into the designer.cs from the child form.
for example, in FormBaseList I have this property/value :
this.gttDXGridView1.OptionsView.ShowAutoFilterRow = true;
I expect that in a derived form, for example FormClientList, there is no mention for this value in the designer.cs, because it should fetch the value from its parent. In other words, just plain simple basic OOP.
And I also expect that when I change the property in FormClientList to
this.gttDXGridView1.OptionsView.ShowAutoFilterRow = false;
that this is seen as an override from the baseclass.
However, VS keeps overwriting the property in FormClientList.Designer.cs with the value found in FormBaseList.Designer.cs.
This breaks the rules of OOP in my opinion, other tools that support Visual Inheritance like Delphi for example do this correct.
How can I stop VS from doing this ?
The properties are changed using the designer.
All controls are DevExpress controls, or derived from a DevExpress control.
Another example, which works just opposite so its very strange.
For example put a Button on the BaseForm and give it an image.
The button with the image appears on all derived forms.
Now change the image on the button of the BaseForm.
You would expect the image to change on all derived forms also, but that does not happen.
I discovered that again VS has written the property value of the button in all derived designer.cs files, and this time it does not overwrites them.
I created a ticket about this at the DevExpress forum, and they where able to reproduce it.
It is now passed on to their developers.
https://www.devexpress.com/Support/Center/Question/Details/T692940/devexpress-controls-break-visual-inheritance-in-visual-studio
It also seems I was not the first to report a similar problem.
https://www.devexpress.com/Support/Center/Question/Details/T692244/imageoptions-are-serialized-in-a-successor-when-visual-inheritance-is-in-effect
I am working on a WinForm Application.
The Form has many fields/components but is poorly built.
for example a field is used as user name on one case and used as folder path on the other case. Code is quite poorly maintaned.
Is is possible that when i run the application and GUI appears, i can use a tool like 'spy++' which can show me 'names' of the components (not ids). For instance the name of a button or name of a label.
Or if i can use SPY++ for 'names' please tell me?
I would solve the problem by adding a ToolTip control to your form and iterating over each control and adding a Tool Tip message to each control that is the name of the control.
First, add a ToolTip object to your form (from the Tools section of the designer.) You can rename it, but for the sake of my demo, I left it as the default name toolTip1.
Next, add a method similar to the one I'm posting below to the code page of your form. (I'm assuming this is for C# but the code is simple and can easily be modified for VB or C++).
public void AddNameToToolTip(Control c)
{
toolTip1.SetToolTip(c, c.Name);
foreach (Control child in c.Controls) AddNameToToolTip(child);
}
Finally, from within the Form constructor, add the following line of code after the call to InitializeComponent().
AddNameToToolTip(this);
This will add a ToolTip message to each control in your form. All you should have to do is hover your mouse over each control and the ToolTip will pop up a message after a second or two displaying the name of the underlying control.
Alternatively, you can recursively adding a MouseHover event to each control and when the event is fired, write the name of the control to the debugger. This would also work if you are already using a ToolTip control within your form.
I am eager to find some solid (free, Open Source, or tutorial/example) code to make a WPF Combobox do autocomlete/autofilter as the user types. But everything I've tried so far has had some sort of problem...
A Reusable WPF Autocomplete TextBox came close, but I can't get it to work with more than one filter (more info here).
WPF autocomplete textbox/combobox doesn't work for me because it inherits from UserControl, and thus doesn't support the DataTemplates I need (for showing/selecting the value of one property for an object with multiple properties).
Automatically Filtering a ComboBox in WPF didn't work because it doesn't seem to ever find the EditableTextBox portion of the inherited ComboBox code (via (TextBox)base.GetTemplateChild("PART_EditableTextBox") which seems to always returns null).
Building a Filtered ComboBox for WPF just gets stuck in a refresh loop then overflows the stack after I type just a few letters.
Other things I've considered:
I know that Windows Forms' Combobox control has AutoCompleteMode and I could embed it in WPF, but I can't imagine it would play very well with my WPF data bindings.
Perhaps it is too complex and I need to simplify, maybe by building one-dimensional (single-property) ObservableCollections for the ComboBoxen... However, the challenge of applying multiple filters (one set by another control's value, and one from what the user is typing) to multiple controls using different views of the same DataSet would require a ridiculous amount of processing power to destroy and rebuild the list every time the user types a character!
So... I'm at wit's end. Any suggestions?
If your Combobox has some data source attached to it ,
just make
1-IsTextSearchEnabled = true.
2-IsEditable = true.
you are good to go
Try this one:
http://blogs.windowsclient.net/dragonz/archive/2010/02/23/autocomplete-textbox-control-for-wpf.aspx
In order to make a convenient UI for an .Net 2.0 Winforms application I am working on, I have need for a control that I'm pretty sure goes beyond the "out of the box" behavior of any standard control. A mock-up of what I'm trying to achieve follows:
Mock up http://www.claware.com/images/temp/mockup.png
Essentially, this part of the application attempts to parse words into syllables from tribal languages (no dictionary to refer to; any and all unicode characters are possible.) By the time the user gets this far, he has already defined the vowels / consonants in his language and some other configuration. There is then an iterative process of (1) the application guesses which syllables exist in the language based on some rules, (2) the user refines the guesses, selecting the correct parsings or manually parsing a word, (3) the application "learns" from the user's feedback and makes smarter guesses, (4) repeat until the data is "good enough" to move on.
The control needs to present each word (the grey headers), then all the syllable break guesses (the white areas with dots separating the parts of words.) There is also a way to manually enter a parsing, which will display a text area and save button (at the bottom of the mockup.) When the user hovers over a guess, the background changes and "accept / reject" buttons appear. Clicking on the accept, or entering a manual parsing, removes the entire word from the list. Clicking the reject button removes just that item.
I'm by no means 100% sold on the formatting I have above, but I think you can get a general idea of the types of formatting and functional control I need. The control will also scroll vertically--there may be thousands of words initially.
My question for you experienced WinForms developers is: where to start? I would really, really like to stay within the .Net core framework and extend an existing control as opposed to a third-party control. (At the risk of starting a religious war: yes, I suffer from NIH-syndrome, but it's a conscious decision based on a lot of quick-fix solutions but long-term problems with 3rd party controls.) Where can I get the most "bang for my bucK" and the least reinventing the wheel? ListView? ListBox? ScrollableControl? Do I need to go all the way back to Control and paint everything manually? I appreciate any help that could be provided!
[Edit] Thanks everyone for the ideas. It seems like the most elegant solution for my purposes is to create a custom control consisting of a FlowLayoutPanel and a VScrollBar. The FlowLayoutPanel can contain instances of the custom controls used for each word. But the FlowLayoutPanel is virtual, i.e. it only contains those instances which are visible (and some "just out of scroll"). The VScrollBar events determine what needs to be loaded. A bit of code to write, but isn't too bad and seems to work well.
I would look at the TableLayoutPanel and FlowLayoutPanel controls. These will let you organize a series of controls with moderate ease in a vertical fashion. I would then create a UserControl that consists of a label and 2 buttons. The UserControl will expose properties like Text and events that are exposed for the button clicks.. For each entry in the list, you will create an instance of the UserControl, assign the text value, and handle the click events. The instance will be placed in the Table/Flow panel in the correct order. Both of those layout panels do allow for inserting items between other items so you can add/remove items from the list dynamically.
Edit:
Given the length of what you are trying to render, I would consider using the DataGridView and do some custom rendering to make it perform how you want it to work. Using the rendering events of the DGV you can merge columns, change background colors (like highlighting the dark gray lines), turn on/off the buttons, and handle changing the grid into edit mode for your rows to allow modification or inserting of new values. This method would easily handle large datasets and you could bind directly to them very easily.
Well, this certainly looks like a candidate for a custom component that you should be creating yourself. You can create this using standard .Net drawing commands along with a text-box, and a regular button control.
Now you want to find out where to start.
Create a Windows Forms Control Library project.
Drop in the textbox and the button control.
The panel drawing code should preferably be done by code. This can be done using the regular GDI+ commands.
Edit:
Here's another idea, and one that I've practically used in my own project with great success.
You could use a web-browser control in the app, and show your data as html. You could update the source of the web-browser control based on the input in the textbox, and clicking on the links in the web browser control will give you the event that you can trap to do some action. Your CSS will work.
I used this technique to build the 'desktop' in an app I made called 'Correct Accounting Software'. People loved the desktop so much that it is one of the best loved features of the app.
Here's how I would do it:
Create a custom control. In this custom control, have a ListBox atop a LinkButton, and when the LinkButton is clicked you can make it give way to a TextBox. The ListBoxes will have the top row unselectable... you can probably get the rest from there. When you get your list of words, fill a Scrollable of some kind with one control for each word:
(foreach String word in words){
myScrollable.add(new MyComponent(word));
}
From there, I'm not sure what you want to do with the boxes or the data, but that's my initial idea on the UI setup.
Use the WebBrowser control and generate the HTML markup into it using DocumentStream or DocumentText.