Related
When running scripts in bash, I have to write ./ in the beginning:
$ ./manage.py syncdb
If I don't, I get an error message:
$ manage.py syncdb
-bash: manage.py: command not found
What is the reason for this? I thought . is an alias for current folder, and therefore these two calls should be equivalent.
I also don't understand why I don't need ./ when running applications, such as:
user:/home/user$ cd /usr/bin
user:/usr/bin$ git
(which runs without ./)
Because on Unix, usually, the current directory is not in $PATH.
When you type a command the shell looks up a list of directories, as specified by the PATH variable. The current directory is not in that list.
The reason for not having the current directory on that list is security.
Let's say you're root and go into another user's directory and type sl instead of ls. If the current directory is in PATH, the shell will try to execute the sl program in that directory (since there is no other sl program). That sl program might be malicious.
It works with ./ because POSIX specifies that a command name that contain a / will be used as a filename directly, suppressing a search in $PATH. You could have used full path for the exact same effect, but ./ is shorter and easier to write.
EDIT
That sl part was just an example. The directories in PATH are searched sequentially and when a match is made that program is executed. So, depending on how PATH looks, typing a normal command may or may not be enough to run the program in the current directory.
When bash interprets the command line, it looks for commands in locations described in the environment variable $PATH. To see it type:
echo $PATH
You will have some paths separated by colons. As you will see the current path . is usually not in $PATH. So Bash cannot find your command if it is in the current directory. You can change it by having:
PATH=$PATH:.
This line adds the current directory in $PATH so you can do:
manage.py syncdb
It is not recommended as it has security issue, plus you can have weird behaviours, as . varies upon the directory you are in :)
Avoid:
PATH=.:$PATH
As you can “mask” some standard command and open the door to security breach :)
Just my two cents.
Your script, when in your home directory will not be found when the shell looks at the $PATH environment variable to find your script.
The ./ says 'look in the current directory for my script rather than looking at all the directories specified in $PATH'.
When you include the '.' you are essentially giving the "full path" to the executable bash script, so your shell does not need to check your PATH variable. Without the '.' your shell will look in your PATH variable (which you can see by running echo $PATH to see if the command you typed lives in any of the folders on your PATH. If it doesn't (as is the case with manage.py) it says it can't find the file. It is considered bad practice to include the current directory on your PATH, which is explained reasonably well here: http://www.faqs.org/faqs/unix-faq/faq/part2/section-13.html
On *nix, unlike Windows, the current directory is usually not in your $PATH variable. So the current directory is not searched when executing commands. You don't need ./ for running applications because these applications are in your $PATH; most likely they are in /bin or /usr/bin.
This question already has some awesome answers, but I wanted to add that, if your executable is on the PATH, and you get very different outputs when you run
./executable
to the ones you get if you run
executable
(let's say you run into error messages with the one and not the other), then the problem could be that you have two different versions of the executable on your machine: one on the path, and the other not.
Check this by running
which executable
and
whereis executable
It fixed my issues...I had three versions of the executable, only one of which was compiled correctly for the environment.
Rationale for the / POSIX PATH rule
The rule was mentioned at: Why do you need ./ (dot-slash) before executable or script name to run it in bash? but I would like to explain why I think that is a good design in more detail.
First, an explicit full version of the rule is:
if the path contains / (e.g. ./someprog, /bin/someprog, ./bin/someprog): CWD is used and PATH isn't
if the path does not contain / (e.g. someprog): PATH is used and CWD isn't
Now, suppose that running:
someprog
would search:
relative to CWD first
relative to PATH after
Then, if you wanted to run /bin/someprog from your distro, and you did:
someprog
it would sometimes work, but others it would fail, because you might be in a directory that contains another unrelated someprog program.
Therefore, you would soon learn that this is not reliable, and you would end up always using absolute paths when you want to use PATH, therefore defeating the purpose of PATH.
This is also why having relative paths in your PATH is a really bad idea. I'm looking at you, node_modules/bin.
Conversely, suppose that running:
./someprog
Would search:
relative to PATH first
relative to CWD after
Then, if you just downloaded a script someprog from a git repository and wanted to run it from CWD, you would never be sure that this is the actual program that would run, because maybe your distro has a:
/bin/someprog
which is in you PATH from some package you installed after drinking too much after Christmas last year.
Therefore, once again, you would be forced to always run local scripts relative to CWD with full paths to know what you are running:
"$(pwd)/someprog"
which would be extremely annoying as well.
Another rule that you might be tempted to come up with would be:
relative paths use only PATH, absolute paths only CWD
but once again this forces users to always use absolute paths for non-PATH scripts with "$(pwd)/someprog".
The / path search rule offers a simple to remember solution to the about problem:
slash: don't use PATH
no slash: only use PATH
which makes it super easy to always know what you are running, by relying on the fact that files in the current directory can be expressed either as ./somefile or somefile, and so it gives special meaning to one of them.
Sometimes, is slightly annoying that you cannot search for some/prog relative to PATH, but I don't see a saner solution to this.
When the script is not in the Path its required to do so. For more info read http://www.tldp.org/LDP/Bash-Beginners-Guide/html/sect_02_01.html
All has great answer on the question, and yes this is only applicable when running it on the current directory not unless you include the absolute path. See my samples below.
Also, the (dot-slash) made sense to me when I've the command on the child folder tmp2 (/tmp/tmp2) and it uses (double dot-slash).
SAMPLE:
[fifiip-172-31-17-12 tmp]$ ./StackO.sh
Hello Stack Overflow
[fifi#ip-172-31-17-12 tmp]$ /tmp/StackO.sh
Hello Stack Overflow
[fifi#ip-172-31-17-12 tmp]$ mkdir tmp2
[fifi#ip-172-31-17-12 tmp]$ cd tmp2/
[fifi#ip-172-31-17-12 tmp2]$ ../StackO.sh
Hello Stack Overflow
When running scripts in bash, I have to write ./ in the beginning:
$ ./manage.py syncdb
If I don't, I get an error message:
$ manage.py syncdb
-bash: manage.py: command not found
What is the reason for this? I thought . is an alias for current folder, and therefore these two calls should be equivalent.
I also don't understand why I don't need ./ when running applications, such as:
user:/home/user$ cd /usr/bin
user:/usr/bin$ git
(which runs without ./)
Because on Unix, usually, the current directory is not in $PATH.
When you type a command the shell looks up a list of directories, as specified by the PATH variable. The current directory is not in that list.
The reason for not having the current directory on that list is security.
Let's say you're root and go into another user's directory and type sl instead of ls. If the current directory is in PATH, the shell will try to execute the sl program in that directory (since there is no other sl program). That sl program might be malicious.
It works with ./ because POSIX specifies that a command name that contain a / will be used as a filename directly, suppressing a search in $PATH. You could have used full path for the exact same effect, but ./ is shorter and easier to write.
EDIT
That sl part was just an example. The directories in PATH are searched sequentially and when a match is made that program is executed. So, depending on how PATH looks, typing a normal command may or may not be enough to run the program in the current directory.
When bash interprets the command line, it looks for commands in locations described in the environment variable $PATH. To see it type:
echo $PATH
You will have some paths separated by colons. As you will see the current path . is usually not in $PATH. So Bash cannot find your command if it is in the current directory. You can change it by having:
PATH=$PATH:.
This line adds the current directory in $PATH so you can do:
manage.py syncdb
It is not recommended as it has security issue, plus you can have weird behaviours, as . varies upon the directory you are in :)
Avoid:
PATH=.:$PATH
As you can “mask” some standard command and open the door to security breach :)
Just my two cents.
Your script, when in your home directory will not be found when the shell looks at the $PATH environment variable to find your script.
The ./ says 'look in the current directory for my script rather than looking at all the directories specified in $PATH'.
When you include the '.' you are essentially giving the "full path" to the executable bash script, so your shell does not need to check your PATH variable. Without the '.' your shell will look in your PATH variable (which you can see by running echo $PATH to see if the command you typed lives in any of the folders on your PATH. If it doesn't (as is the case with manage.py) it says it can't find the file. It is considered bad practice to include the current directory on your PATH, which is explained reasonably well here: http://www.faqs.org/faqs/unix-faq/faq/part2/section-13.html
On *nix, unlike Windows, the current directory is usually not in your $PATH variable. So the current directory is not searched when executing commands. You don't need ./ for running applications because these applications are in your $PATH; most likely they are in /bin or /usr/bin.
This question already has some awesome answers, but I wanted to add that, if your executable is on the PATH, and you get very different outputs when you run
./executable
to the ones you get if you run
executable
(let's say you run into error messages with the one and not the other), then the problem could be that you have two different versions of the executable on your machine: one on the path, and the other not.
Check this by running
which executable
and
whereis executable
It fixed my issues...I had three versions of the executable, only one of which was compiled correctly for the environment.
Rationale for the / POSIX PATH rule
The rule was mentioned at: Why do you need ./ (dot-slash) before executable or script name to run it in bash? but I would like to explain why I think that is a good design in more detail.
First, an explicit full version of the rule is:
if the path contains / (e.g. ./someprog, /bin/someprog, ./bin/someprog): CWD is used and PATH isn't
if the path does not contain / (e.g. someprog): PATH is used and CWD isn't
Now, suppose that running:
someprog
would search:
relative to CWD first
relative to PATH after
Then, if you wanted to run /bin/someprog from your distro, and you did:
someprog
it would sometimes work, but others it would fail, because you might be in a directory that contains another unrelated someprog program.
Therefore, you would soon learn that this is not reliable, and you would end up always using absolute paths when you want to use PATH, therefore defeating the purpose of PATH.
This is also why having relative paths in your PATH is a really bad idea. I'm looking at you, node_modules/bin.
Conversely, suppose that running:
./someprog
Would search:
relative to PATH first
relative to CWD after
Then, if you just downloaded a script someprog from a git repository and wanted to run it from CWD, you would never be sure that this is the actual program that would run, because maybe your distro has a:
/bin/someprog
which is in you PATH from some package you installed after drinking too much after Christmas last year.
Therefore, once again, you would be forced to always run local scripts relative to CWD with full paths to know what you are running:
"$(pwd)/someprog"
which would be extremely annoying as well.
Another rule that you might be tempted to come up with would be:
relative paths use only PATH, absolute paths only CWD
but once again this forces users to always use absolute paths for non-PATH scripts with "$(pwd)/someprog".
The / path search rule offers a simple to remember solution to the about problem:
slash: don't use PATH
no slash: only use PATH
which makes it super easy to always know what you are running, by relying on the fact that files in the current directory can be expressed either as ./somefile or somefile, and so it gives special meaning to one of them.
Sometimes, is slightly annoying that you cannot search for some/prog relative to PATH, but I don't see a saner solution to this.
When the script is not in the Path its required to do so. For more info read http://www.tldp.org/LDP/Bash-Beginners-Guide/html/sect_02_01.html
All has great answer on the question, and yes this is only applicable when running it on the current directory not unless you include the absolute path. See my samples below.
Also, the (dot-slash) made sense to me when I've the command on the child folder tmp2 (/tmp/tmp2) and it uses (double dot-slash).
SAMPLE:
[fifiip-172-31-17-12 tmp]$ ./StackO.sh
Hello Stack Overflow
[fifi#ip-172-31-17-12 tmp]$ /tmp/StackO.sh
Hello Stack Overflow
[fifi#ip-172-31-17-12 tmp]$ mkdir tmp2
[fifi#ip-172-31-17-12 tmp]$ cd tmp2/
[fifi#ip-172-31-17-12 tmp2]$ ../StackO.sh
Hello Stack Overflow
When running scripts in bash, I have to write ./ in the beginning:
$ ./manage.py syncdb
If I don't, I get an error message:
$ manage.py syncdb
-bash: manage.py: command not found
What is the reason for this? I thought . is an alias for current folder, and therefore these two calls should be equivalent.
I also don't understand why I don't need ./ when running applications, such as:
user:/home/user$ cd /usr/bin
user:/usr/bin$ git
(which runs without ./)
Because on Unix, usually, the current directory is not in $PATH.
When you type a command the shell looks up a list of directories, as specified by the PATH variable. The current directory is not in that list.
The reason for not having the current directory on that list is security.
Let's say you're root and go into another user's directory and type sl instead of ls. If the current directory is in PATH, the shell will try to execute the sl program in that directory (since there is no other sl program). That sl program might be malicious.
It works with ./ because POSIX specifies that a command name that contain a / will be used as a filename directly, suppressing a search in $PATH. You could have used full path for the exact same effect, but ./ is shorter and easier to write.
EDIT
That sl part was just an example. The directories in PATH are searched sequentially and when a match is made that program is executed. So, depending on how PATH looks, typing a normal command may or may not be enough to run the program in the current directory.
When bash interprets the command line, it looks for commands in locations described in the environment variable $PATH. To see it type:
echo $PATH
You will have some paths separated by colons. As you will see the current path . is usually not in $PATH. So Bash cannot find your command if it is in the current directory. You can change it by having:
PATH=$PATH:.
This line adds the current directory in $PATH so you can do:
manage.py syncdb
It is not recommended as it has security issue, plus you can have weird behaviours, as . varies upon the directory you are in :)
Avoid:
PATH=.:$PATH
As you can “mask” some standard command and open the door to security breach :)
Just my two cents.
Your script, when in your home directory will not be found when the shell looks at the $PATH environment variable to find your script.
The ./ says 'look in the current directory for my script rather than looking at all the directories specified in $PATH'.
When you include the '.' you are essentially giving the "full path" to the executable bash script, so your shell does not need to check your PATH variable. Without the '.' your shell will look in your PATH variable (which you can see by running echo $PATH to see if the command you typed lives in any of the folders on your PATH. If it doesn't (as is the case with manage.py) it says it can't find the file. It is considered bad practice to include the current directory on your PATH, which is explained reasonably well here: http://www.faqs.org/faqs/unix-faq/faq/part2/section-13.html
On *nix, unlike Windows, the current directory is usually not in your $PATH variable. So the current directory is not searched when executing commands. You don't need ./ for running applications because these applications are in your $PATH; most likely they are in /bin or /usr/bin.
This question already has some awesome answers, but I wanted to add that, if your executable is on the PATH, and you get very different outputs when you run
./executable
to the ones you get if you run
executable
(let's say you run into error messages with the one and not the other), then the problem could be that you have two different versions of the executable on your machine: one on the path, and the other not.
Check this by running
which executable
and
whereis executable
It fixed my issues...I had three versions of the executable, only one of which was compiled correctly for the environment.
Rationale for the / POSIX PATH rule
The rule was mentioned at: Why do you need ./ (dot-slash) before executable or script name to run it in bash? but I would like to explain why I think that is a good design in more detail.
First, an explicit full version of the rule is:
if the path contains / (e.g. ./someprog, /bin/someprog, ./bin/someprog): CWD is used and PATH isn't
if the path does not contain / (e.g. someprog): PATH is used and CWD isn't
Now, suppose that running:
someprog
would search:
relative to CWD first
relative to PATH after
Then, if you wanted to run /bin/someprog from your distro, and you did:
someprog
it would sometimes work, but others it would fail, because you might be in a directory that contains another unrelated someprog program.
Therefore, you would soon learn that this is not reliable, and you would end up always using absolute paths when you want to use PATH, therefore defeating the purpose of PATH.
This is also why having relative paths in your PATH is a really bad idea. I'm looking at you, node_modules/bin.
Conversely, suppose that running:
./someprog
Would search:
relative to PATH first
relative to CWD after
Then, if you just downloaded a script someprog from a git repository and wanted to run it from CWD, you would never be sure that this is the actual program that would run, because maybe your distro has a:
/bin/someprog
which is in you PATH from some package you installed after drinking too much after Christmas last year.
Therefore, once again, you would be forced to always run local scripts relative to CWD with full paths to know what you are running:
"$(pwd)/someprog"
which would be extremely annoying as well.
Another rule that you might be tempted to come up with would be:
relative paths use only PATH, absolute paths only CWD
but once again this forces users to always use absolute paths for non-PATH scripts with "$(pwd)/someprog".
The / path search rule offers a simple to remember solution to the about problem:
slash: don't use PATH
no slash: only use PATH
which makes it super easy to always know what you are running, by relying on the fact that files in the current directory can be expressed either as ./somefile or somefile, and so it gives special meaning to one of them.
Sometimes, is slightly annoying that you cannot search for some/prog relative to PATH, but I don't see a saner solution to this.
When the script is not in the Path its required to do so. For more info read http://www.tldp.org/LDP/Bash-Beginners-Guide/html/sect_02_01.html
All has great answer on the question, and yes this is only applicable when running it on the current directory not unless you include the absolute path. See my samples below.
Also, the (dot-slash) made sense to me when I've the command on the child folder tmp2 (/tmp/tmp2) and it uses (double dot-slash).
SAMPLE:
[fifiip-172-31-17-12 tmp]$ ./StackO.sh
Hello Stack Overflow
[fifi#ip-172-31-17-12 tmp]$ /tmp/StackO.sh
Hello Stack Overflow
[fifi#ip-172-31-17-12 tmp]$ mkdir tmp2
[fifi#ip-172-31-17-12 tmp]$ cd tmp2/
[fifi#ip-172-31-17-12 tmp2]$ ../StackO.sh
Hello Stack Overflow
I try to run a C implementation of Sift feature descriptor executable from matlab at linux. The script I run and the executable at the some folder and executable is run by the following
./sift <tmp.pgm >tmp.key
and I trued to run it on Matlab with followings but none of them worked
eval('!./sift <tmp.pgm >tmp.key');
system('./sift <tmp.pgm >tmp.key');
unix('./sift <tmp.pgm >tmp.key');
I also check the executable from terminal and it works without any flaw. Is there any other way to do that or Do i have any slight mistake?
Your syntax looks right.
The -1 status means it's probably failing to find or launch sift at all. I know this is basic (and I think someone else mentioned it), but is your Matlab program running from the same directory that sift is in when it calls it? The system() function evaluates paths with respect to the Matlab session's current directory, not the location of the calling script. If your script has called cd for other reasons, that'll affect it. Check your current directory with pwd and do an ls and exist('./sift', 'file') to make sure it's there.
If this is the case, you could make it more robust by calling sift with an absolute path, maybe calculated at run time using fileparts(mfilename('fullpath')) in the script.
I figure out the problem as the path /matlab/bin/glnxa64/matlab_helper has permission problem. After I check the problem, everything started to work correctly.
I had the same problem of permission. Just adding solution for others to see as i had hard time finding the solution.
Open terminal and type
cd \path_of_your_file
sudo chmod -R 777
it will ask for your password and will permit to run the exe. Hugs..
This is what I get when trying to compile a simple hello world program with gcc.
c:\>gcc hello.c
hello.c:9:2: warning: no newline at end of file
C:\MinGW\bin\..\lib\gcc\mingw32\3.4.5\..\..\..\..\mingw32\bin\ld.exe: cannot open output file a.exe
: Permission denied
collect2: ld returned 1 exit status
Does it have something to do with windows 7 administrative privileges?
If the output file is being created but cannot be opened, where is it located?
Sorry if this is too much of a noobie question. I have been using Dev-C++ for compiling my source code till now. I tried googling around the error but all i could find was the file is already open, but there is no mention of such exe in task manager.
Edit: Also the file is located at C:\hello.c
Will i be able to do it if i place it in other drive?
When i place the file at D:\ and try change it to any other drive using cd d:\ doesn't change the drive.
Yes it is a permissions issue, you must not be running the command line window in Admin mode.
Don't work in C:\
Copy the file to a folder under my documents, or a subfolder of C:, or another drive.
Or, run the console in Administrator mode if you really want to work in the root of C:
To switch to D: while in C:, just type D: (you use CD only when already on the correct drive)
The most common case is that your program may still be running in the background, possibly hanged on an endless loop. You can try searching for the process in the process list (press Alt+Ctrl+Del) and killing it.
I found problem was hosting src under google drive;.. jesus super star chuck norris van damm .. 3h trying to figure out this one (vs code + mingw64).
Solution:
Just moved the folder with my cpp source file outside google drive managed folder tree (was on f:\gd) so moved my source into f:\dev.
The g++.exe-command in the build-log in the CodeBlocks-IDE shows the command
with an additional path: C:\MinGW\lib, which is wrong.
If you copy the command to a cmd-window (in the directory of your Project)
without the C:\MinGW\lib the compiler works. When you copy the command as shown in CodeBlocks-Buil-log it fails, with the same message in the cmd-window.
Have a look at the Settings > Compiler > Search Directories > Linker. You've got to delete the
C:\MinGW\lib there, but the bug is, that it is not deleted if you do it once.
You've got to repeat it and then it works.