I have got a SSIS Package running in a SQL Server. This Job is continuously failing in the Production.
I am getting the below error
Relevant error information from screenshot.
SQL Server agent running a package in 64 bit mode. SQL Server 2016 SP2, CU17. The SQL command requires 4 parameters, buthte parameter mapping only has 0 parameters. The data flow source "Agreement Mapping" is an Excel Source which failed validation and returned validation status VS_ISBROKEN.
When I Manually run the Package in Visual Studio All the Nodes get executed.
Can someone help me to debug this error
I tried running the package Manually in Visual Studio and i can see
All the Nodes got executed successfully.
Thanks!
Balaji
Related
I created a SSIS package for a simple file to Postgres table load. In Visual Studio it ran without any issues. But when its deployed and ran via SQL Agent job its failing stating below error:
as per the answers I found here and on other sites, I have changed the VS version to lower then the SSIS and changed the runtime to 32 bit in both the places. But its still failing due to the same error. so any suggestions would be of great help and let me know if you need more details, thanks!
ScreenShots:
SSIS Package:
Package deployed in SQL Server:
SQL Agent Job:
I'm working on a SSIS package which I've been developing inside Visual Studio Community 2019 (VS). I have installed Integration Services to develop the SSIS package.
The task of the package is pretty simple, connect to a PostgreSQL datasource via an ODBC connection and then perform a lookup to identify new and updated fields and pass these into a MS SQL database via an OLE DB connection. When I run this package from both VS and via cmdp using dtexec.exe it runs successfully without any error (yay).
I run into a problem when I try to execute this package after deploying it from VS using the Deploy Package Wizard to SSISDB on MS SQL Server(2016). The errors can be found in the image below. Please note that I have selected Target Server Version SQL Server 2016 so there should be no compatibility issues between the package and server.
I have read that there may be a compatibility issue between 64 & 32-bit. However, I have no idea how to configure this from within SSISDB. I did however, attempt to execute the package with run64bitruntime set to "false" (done inside vs) and "true" with no change in result. my version of SSMS 2016 is running 64-bit.
I should also add that I'm connecting remotely to SSMS 2016 to run the package from SSISDB, remote connections is set to true for this server.
Please let me know if I can supply further details to help debug this. Thank you.
I have an SSIS project that I have not had any issue with for the last year. I can execute the unchanged packages without issue currently from Visual Studio 2019 and as a SQL Agent Job in SSMS.
However, if I open the data flow ODBC source in the Data Task, I am prompted to update the Metadata on the Output columns. Whether I select yes or no and make no other changes to the package, I receive the below error on execution:
"ODBC Source" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
The only change that I can think that may have caused this error is I updated from Visual Studio 2017 to Visual Studio 2019 on the server. I do use VS 2019 on my local computer and it is having the same issue.
The ODBC Source is using a SQL Anywhere 17 32-bit driver.
I have tried the following and continue to receive the error on execution:
Recreated the data flow task, the ODBC connection manager, and the package.
Ran the package using DTEXEC /FILE.
Set ValidateExternalMetadata to False on the ODBC Source
Confirmed the External and Output columns on the Data Source have the same DataType
EDIT:
I created a new Project in VS 2017 with the same Data Flow Task. I could run and edit the ODBC Source without any Metadata errors on execution. I opened the project in VS 2019 and as soon as I opened the ODBC Source, I was prompted to update the metadata. Then when executing, I received the "VS_NEEDSNEWMETADATA" error. Any ideas on correcting this in VS 2019?
Try to change the ODBC Source ValidateExternalMetadata property to False, for more information you can check Matt Masson's (former program manager of SSIS) answer in the following link:
ValidateExternalMetadata property, what exactly does this do?
Also, make sure that you have selected the right TargetServerVersion property from the project configuration:
How to change TargetServerVersion of my SSIS Project
I created SSIS an project, which exports some data to Excel. In Visual Studio 2017 it works fine, but when I run it using a SQL Server Agent job (MS SQL Server 2017), it throws this error:
"Executed as user: Administrator. Microsoft (R) SQL Server Execute Package
Utility Version 13.0.1601.5 for 32-bit Copyright (C) 2016 Microsoft. All
rights reserved. Started: 3:31:46 PM Error: 2017-12-27 15:31:47.10
Code: 0xC0010018 Source: Package Description: Error loading value "
<DTS:ConnectionManagers xmlns:DTS="www.microsoft.com/SqlServer/Dts">
<DTS:ConnectionManager DTS:refId="Package.ConnectionManagers[Excel]"
DTS:CreationName="EXCEL" DTS:DTSID="{0E7AADD0-AA79-4C99-8FFC-92E1CB5A871A}"
DTS:ObjectName="Excel"><DTS:ObjectData><DTS" from node
"DTS:ConnectionManagers". End Error Could not load package "\\phantsmgmt\c$\SDATA\ITDokumentace\SQL_DT_projects\Export_ser_zak_CEBIA\Export_ser_zak_CEBIA\Export_ser_zak_CEBIA\Package.dtsx"
because of error 0xC0010014. Description: The package failed to load due to
error 0xC0010014 "One or more error occurred. There should be more specific
errors preceding this one that explains the details of the errors. This
message is used as a return value from functions that encounter errors.".
This occurs when CPackage::LoadFromXML fails. Source: Package Started:
3:31:46 PM Finished: 3:31:47 PM Elapsed: 0.422 seconds. The package
could not be loaded. The step failed."
That is stange, because I have another SSIS project, which is using the Excel connection manager too, and it works fine using the scheduled SQL Server Agent job.
I tried to turn 32 bit mode on and off again, but nothing helps.
The solution, that helps me is Target Server Version setting in Visual Studio. More info here:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/84e470e9-aeef-4850-b29e-9eb3d545819f/running-ssis-package-as-sql-agent-job-failed?forum=sqlintegrationservices
They main error is:
Error loading value "
<DTS:ConnectionManagers xmlns:DTS="www.microsoft.com/SqlServer/Dts">
<DTS:ConnectionManager DTS:refId="Package.ConnectionManagers[Excel]"
DTS:CreationName="EXCEL" DTS:DTSID="{0E7AADD0-AA79-4C99-8FFC-92E1CB5A871A}"
DTS:ObjectName="Excel"><DTS:ObjectData><DTS" from node
"DTS:ConnectionManagers". End Error
It looks like the error is from the Excel connection manager, there is a value that cannot be loaded. First you have to check that the excel file path exists. If the file is created after package execution you have to set the DelayValidation property to True for each component that uses this connection.
I'm getting this message more recently with a VS 2019 PRO build of an ssis package and oledb access to ms sql. A straight forward vs 2019 build with oledb access to ms sql would throw this message on our batch machines even though the same job would run on a laptop. I couldn't get anything to work until I set TargetServerVersion to SQLServer 2016. Probably just an anomoly of our somewhat strange environment but I wanted to mention it in case it helped someone else. Some people are saying that this message means dtexec can't read your .dtsx package.
Migrating from SQL Server 2008 R2 to SQL Server 2012.. SQL Server Integration Services 11 is installed on the new server.
The package update went fine and runs in BIDs. The package runs fine when executed from Integration Services. The error happens when the package is kicked off from a JOB.
The error happens in the 1st step of the package where it determines the date (written in VB) The error is the following..
Code: 0xC000F427 Source: Determine snapshot date
Description: To run a SSIS package outside of SQL Server Data Tools you must install Determine snapshot date of Integration Services or higher. End Error
DTExec: The package execution returned
DTSER_FAILURE (1).
Does anyone have a workaround?
BTW, I'm finding some packages run fine, from a job, but others are bombing because of this same/similar error ...
Thanks!