While trying to add a new fe_users record, on save I get
(1/1) Exception
Could not determine pid
It's TYPO3 9.5.20.
We already have a lot of entries in multiple folders which could be edited without problem.
But those records were imported (by EXT:ig_ldap_sso_auth or with mysql terminal)
These records are used only to be shown (no login is used).
What configuration is missing or could be wrong?
EDIT:
as #biesior mentioned: the error message does not come from the core but from an extension. It's EXT:solrfal (in version 7.0.0)
The real error was not in EXT:solrfal. this extension just hides the error with a misleading message.
The real reason was a wrong database configuration for the table fe_users. Although it is not possible in SQL to have a default value for fields of type text (and any given value is ignored) TYPO3 expects a default value if it is configured. As this is not returned from the database it assumes an error. And EXT:solrfal hooks into the error handling and assumes a wrong error.
Hi just got the same problem.
The error message was called in solrfal ConsistencyAspect::getRecordPageId() which was called by ConsistencyAspect::getDetectorsForSiteExclusiveRecord(). I remember that I have added various tablenames to siteExclusiveRecordTables of Extension Settings of solrfal. And yes, there was one table without pid. After removing this table from list, deleting files works again.
I am trying to call Liquibase Stored Procedure Through Tag
it gives me error as sql code
DB2 SQL Error: SQLCODE=-440, SQLSTATE=42884
I Am Tring to call as follows : :
<sql> CALL TestProcedure('abc','xyz') </sql>
it executed well from outside command line Client and not using liquibase
i also tried calling using schema name no luck Open to suggestions
SQL440N is routine not found. The error message should give the text of the rountine name. Does it match what you have in your database. Is is a case sensitive problem? (i.e. try in upper case?)
SQL0440N No authorized routine named "<routine-name>" of type
"<routine-type>" having compatible arguments was found.
This is my code
CURSORSETPROP("Buffering",4)
SELECT course
APPEND BLANK
replace course.name with thisform.txt_course.value
this works fine during the development of the project, however,when i convert the project to .exe file, I cant write to the table and it brings the error
Cannot update the cursor course, since it is read-only
I've manage to find for what i thought was the solution which is the code below
CURSORSETPROP("Buffering",4)
SELE * FROM course INTO CURSOR cCourse READWRITE
APPEND BLANK
replace cCourse.name with thisform.txt_course.value
But the problem is that this code does not write to the table. I mean there was no error about being the table read-only, however there are no additional file added/appended to the table "course"
Can anyone lend me a hand here, i have no idea where to find a solution.
Vfp Error 111 itself, Cannot update the cursor ..., can be caused by a DBF table being included in the VFP Project Manager. If so, you can right click it in the PM and "Exclude".
There is however a mistake in the code you posted: The CURSORSETPROP line affects the alias in the current "work area", which could be anyone or even none, unless you would use the cAlias parameter of the function.
(Or, as a second best way, do the Select before the CursorSetProp().)
I set up the system first by
[old_path]=which('rdsamp');if(~isempty(old_path)) rmpath(old_path(1:end-8)); end
wfdb_url='http://physionet.org/physiotools/matlab/wfdb-app-matlab/wfdb-app-toolbox-0-9-3.zip';
[filestr,status] = urlwrite(wfdb_url,'wfdb-app-toolbox-0-9-3.zip');
unzip('wfdb-app-toolbox-0-9-3.zip');
cd mcode
addpath(pwd);savepath
I am trying to read databases from Physionet.
I have successfully reached one database mitdb by
[tm,sig]=rdsamp('mitdb/100',1)
but I want to reach the database ptbdb unsuccessfully by
[tm,sig]=rdsamp('ptbdb/100',1)
and get the error
Warning: Could not get signal information. Attempting to read signal without buffering.
> In rdsamp at 107
Error: Cannot convert to double:
init: can't open header for record ptbdb/100
Error using rdsamp (line 145)
Java exception occurred:
java.lang.NumberFormatException: Cannot convert
at org.physionet.wfdb.Wfdbexec.execToDoubleArray(Unknown Source)
The first error message refers to these lines in rdsamp.m:
if(isempty(N))
[siginfo,~]=wfdbdesc(recordName);
if(~isempty(siginfo))
N=siginfo(1).LengthSamples;
else
warning('Could not get signal information. Attempting to read signal without buffering.')
end
end
This line if(~isempty(siginfo)) is false means that the siginfo is empty that is there is no signal. Why? No access to the database, I think.
I think other errors follow from it.
So the error must follow from this line
[siginfo,~]=wfdbdesc(recordName);
What does the snake mean here in the brackets?
How can you get data from ptbdb by Matlab?
So
Does this error mean that the connection cannot be established to the database?
or
that there does not exists such data in the database?
It would be very nice to know how you can check if you have connection to the database like in Postrgres. It would be much easier to debug.
If you run physionetdb("ptdb",1) it will download the files to your computer. You will then be able to see the available records in the <current-dir>/ptdb/
Source: physionetdb function documentation. You are interested in the DoBatchDownload parameter.
After downloading it, I believe every command from the toolbox will check if you have the files locally before fetching from the server (as long as you give the function the correct path to the local files).
The problem is that the data unit "100" does not exist in the database ptbdb.
I run finally successfully after waiting 35 minutes with 100Mb cable broadband:
db_list = physionetdb('ptbdb')
and get not complete data finally to the patient 54 - there should be 294 patients.
'ptbdb/patient001/s0014lre' 'ptbdb/patient001/s0014lre' ... cut ...
The main developer, Ikaro's' answer helped me to wait so long:
The WFDB Toolbox connects to PhysioNet's file server. The databases
accessible through the WFDB Toolbox are not SQL database, they consist
of flat files. The error message that you are getting regarding the
ptdb/100 database is because you are attempting to get a record that
does not exist on the database.
For more information on a particular database or record in PhysioNet
please type:
help physionetdb
and
physionetdb('ptdb')
This flat file system is really a bottle neck in the system.
It would be a good time to change to SQL.
I have a CSV file with quote text delimiters. Most of the 90000 rows are fine, but I have a few rows that have a text field that contains both a quote and a comma. For example the fields value would be:
AB",AB
When Delimited this becomes
"AB"",AB"
When SQL 2005 attempts to import this I get errors such as...
Messages
Error 0xc0202055: Data Flow Task: The column delimiter for column "Column 4" was not found.
(SQL Server Import and Export Wizard)
This only seems to happen when a quote and comma are in a text value together. Values like
AB"AB which becomes "AB""AB"
or
AB,AB which becomes "AB,AB"
work fine.
Here are some example rows...
"1464885","LEVER WM","","B","MP17"
"1465075",":PLT-BC !!NOTE!!","","B",""
"1465076","BRKT-STR MTR !NOTE!","","B",""
"1465172",":BRKT-SW MTG !NOTE!","","B","MP16"
"1465388","BUSS BAR !NOTE!","","B","MP10"
"1465391","PLT-BLKHD ""NOTE""","","B","MP20"
"1465564","SPROCKET:13TEETH,74MM OD,66MM","ID W/.25"" SETSCR","B","MP6"
"S01266330002","CABLE:224"",E122/261,8 CO","","B","MP11"
The last row is an example of the problem - the "", causes the error.
I've had MAJOR problems with SSIS. Things that Access, Excel and even DTS seemed to do very well, SSIS chokes on. Variable record-length data is another problem but, yes, these embedded qualifiers are a major problem. Especially if you do not have access to the import files because they're on someone else's server that you pay to gain access to and might even be 4 to 5 GB in size! Cant just to a "replace all" on that every import.
You may want to check into this at Microsoft Downloads called "UnDouble" and here is another workaround you might try.
Seems like with SSIS in SQL Server 2008, the bug is still there. I dont know why they havent addressed this in the parser but its like we went back in time with SSIS in basic import functionality.
UPDATE 11-18-2010: This bug still exists in SSIS. Amazing.
How about just:
Search/replace all "", with ''; (fix all the broken fields)
Search/replace all ;''; with ,"", (to "unfix" properly empty fields.)
Search/replace all '';''; with "","", (to "unfix" properly empty fields which follow a correct encapsulation of embedded delimiters.)
That converts your original to:
"1464885","LEVER WM","","B","MP17"
"1465075",":PLT-BC !!NOTE!!","","B",""
"1465076","BRKT-STR MTR !NOTE!","","B",""
"1465172",":BRKT-SW MTG !NOTE!","","B","MP16"
"1465388","BUSS BAR !NOTE!","","B","MP10"
"1465391","PLT-BLKHD ""NOTE""","","B","MP20"
"1465564","SPROCKET:13TEETH,74MM OD,66MM","ID W/.25"" SETSCR","B","MP6"
"S01266330002","CABLE:224'';E122/261,8 CO","","B","MP11"
Which seems to run the gauntlet fine in SSIS. You may have to step 3 recursively to account for 3 empty fields in a row ('';'';'';, etc.) but the bottom line here is that when you have embedded text qualifiers, you have to either escape them or replace them. Let this be a lesson in your CSV creation processes going forward.
Microsoft says doubled double quotes inside double quote delimited fields just don't work. A fix is planned for the end of 2011...
In the mean time we will have to use workarounds like described in the other answers.
I would just do a search/replace for ", and replace it with ,
Do you have access to the original file?