Maybe a stupid question, but I don't understood why my program in C works with integers, but not with float.
#include <stdio.h>
main()
{
float a, b;
a = 4.5;
b = 9.6;
printf("Result of %.2f + %.2f = %.2f", a, b, added_up(a, b));
}
/****************************************/
added_up(a,b)
{
float c;
printf("Value a: %.2f \n", a);
printf("Value b: %.2f \n", b);
c = a + b;
return (c);
}
My output:
Value a: 0.00
Value b: 0.00
Result of 4.50 + 9.60 = 0.00
If I define the float to int the program works. What's the failure? Should I declare the function as float, but if I try I get another failure.
You must declare a function before using it
You have to define what type the function returns and you must define
type of arguments you are passing to the function
#include <stdio.h>
float added_up(float a,float b); // 1)
int main()
{
float a, b;
a = 4.5;
b = 9.6;
printf("Result of %.2f + %.2f = %.2f", a, b, added_up(a, b));
return 0;
}
/****************************************/
float added_up(float a,float b)// 2)
{
float c=a+b;
printf("Value a: %.2f \n", a);
printf("Value b: %.2f \n", b);
return c;
}
Related
#include<stdio.h>
int add(int, int); // function prototype
int main()
{
int a, b;
// printf("Enter 2 integer numbers\n");
// scanf("%d%d", &a, &b);
//function call add(a, b);
printf(" %d + %d = %d \n", a, b, add(2, 7));
Please focus on this line why it gives address + 0 = 9//
return 0;
}
//function definition
int add(int x, int y)
{
return x+y;
}
// produces outPut : 199164000 + 0 = 9
You commented the scanf function and also didn't given values for the a and b. So it printed garbage values. You also need to pass a and b into the add(a,b) function.
#include<stdio.h>
int add(int, int); // function prototype
int main()
{
int a, b;
// printf("Enter 2 integer numbers\n");
scanf("%d%d", &a, &b);
//function call add(a, b);
printf(" %d + %d = %d \n", a, b, add(a, b));
return 0;
}
//function definition
int add(int x, int y)
{
return x+y;
}
It is not printing any address. It is printing garbage values. You have not given any values to the variable a and b. So it will print garbage values. Why you commented scanf statement. Just stop commenting it and it will work.
I was do manual analysis to this code. Would wait that the value of variable D change to 1 after first call to F1 function, but conserve his value on 2.
Also i noticed that comment or not comment the *Y--; has no effect.
The output is:
8 9 5 2
5 9 5 2
15 13 4 2
5 13 4 2
Shouldn't variable D change your value to 1 after the first print?
#include <stdio.h>
int F1 (int, int *);
int A = 3;
int B = 7;
int C = 4;
int D = 2;
void main(void)
{
A = F1 (C, &D);
printf("\n %d %d %d %d", A, B, C, D);
C = 3;
C = F1(A, &C);
printf("\n %d %d %d %d", A, B, C, D);
}
int F1 (int X, int *Y)
{
int A;
A = X * *Y;
C++;
B += *Y;
printf ("\n %d %d %d %d", A, B, C, D);
*Y--;
return(C);
}
It's a precedence issue.
*Y--;
means
*(Y--);
but you want
(*Y)--;
I am working in c after a long time.Here i have to achieve three functionality which includes
get a number and show half
2.Get the square of the number
3.Get two number and show their summation and sabtraction.
I am using devC++ and when i compile the code i get the error i mentioned in the title which conflict type if squareInput.What is wrong here:
#include<stdio.h>
#include<conio.h>
int main(){
float x;
printf("enter a number\n");
scanf("%f",&x);
//TASK 1 : display half of the number
pirntf("half of x is = %.3f",x);
//TASK 2 : square of number
squareInput(x); //call square function from here
// TASK 3 : get two numbers and display both summation and sabtraction
float num1,num2; // declare two floating number( floating numbers can hold decimal point numbers
printf("enter num1 \n");
scanf("num1 is =%f",&num1);
printf("enter num2 \n");
scanf("num2 is =%f",num2);
calculate(num1,num2);// call calculate function
getch();
}
float squareInput(float input){
float square=input*input;
printf("\n square of the number is %.3f \n",square);
return 0;
}
float calculate(float num1,float num2){
//summation
float summation= num1+num2; // declare antoher variable called summation to hold the sum
//sabtraction
float sabtraction=num1-num2;
printf("summation is %.2f \n",summation);
printf("sabtraction is %.2f \n",sabtraction);
return 0;
}
Things will go wrong without prototypes. Add
float squareInput(float input);
float calculate(float num1,float num2);
in front of int main().
If you don't declare a function before it's called, the compiler assumes it as a int-returning function. However, squareInput() return float, so the compiler(or linker, maybe) complains to you.
Also note that definitions are declarations(but not vice versa, obviously), so moving the definitions of squareInput() and calculate() in front of where they are called works too.
At the time you call squareInput and calculate, they haven't been defined yet. So C assumes an implicit declaration of int squareInput() and int calculate(). These implicit declarations conflict with the definitions of these functions.
You can fix this by either adding declarations for each of these functions before main:
float squareInput(float input);
float calculate(float num1,float num2);
Or by simply moving the functions in their entirety before main.
Be sure to add prototypes when you use a function. That way you do not need to worry too much about the order in which you call them.
Also try to separate your problems into smaller bits if you can. A comment like TAKS1 shows you that you actually want a function with that name.
#include <stdio.h>
//prototypes
void AskUserForOneNumer(float * number, const char * question );
void TASK_1(float x);
void TASK_2(float x);
void TASK_3(float a, float b);
int main()
{
float x, a, b;
AskUserForOneNumer(&x, "enter x");
AskUserForOneNumer(&a, "enter a");
AskUserForOneNumer(&b, "enter b");
TASK_1(x);
TASK_2(x);
TASK_3(a, b);
}
void TASK_1(float x)
{
printf("x = %g\n", x);
printf("0.5 * x = %g\n", 0.5 * x);
}
void TASK_2(float x)
{
printf("x = %g\n", x);
printf("x * x = %g\n", x * x);
}
void TASK_3(float a, float b)
{
printf("a = %g\n", a);
printf("b = %g\n", b);
printf("a + b = %g\n", a + b);
printf("a - b = %g\n", a - b);
}
void AskUserForOneNumer(float * number, const char * question)
{
float x;
printf("%s\n", question);
scanf("%f", &x);
printf("your input was %g\n", x);
*number = x;
}
I am new to both this site and C programming and I am attempting to make a quadratic formula but I cannot get the roots to work. I believe I am not calling a function or perhaps there is something else wrong. Any help would be appreciated, thank you!
#include <math.h>
#include <stdio.h>
#include <stdlib.h>
float userinput(char prompt[]); //Function Prototype
float root(float a, float b, float c);
int main()
{
float a,b,c;
a=userinput("Enter the value for a:"); //Function Call
b=userinput("Enter the value for b:");
c=userinput("Enter the value for c:");
printf("The Equation you entered is |n%fx^2%+fx%+f=0", a, b, c);
return 0;
}
float root(float a, float b, float c)
{
float D,x,x1,x2,x3,x4;
D = b*b - 4*a*c;
if(D>0)
{
printf("There are two real roots, the roots are: ");
x1 = ((-b+(sqrt(D)))/(2*a));
x2 = ((-b-(sqrt(D)))/(2*a));
printf("%.2f and %.2f,x1 , x2");
}
if(D==0)
{
printf("There is one real root, the root is: ");
x = ((-b)/(2*a));
printf("%.2f,x");
}
if(D<0)
{
printf("There are two imaginary roots. The roots are: ");
x3 = ((-b/2*a)+(sqrt(fabs(D))/(2*a)));
printf("%.2f,x3i and");
x4 = ((-b/2*a)-(sqrt(fabs(D))/(2*a)));
printf("%.2f,x4i");
}
}
float userinput(char prompt[]) //Function definition
{
float answer;
int status;
do
{
printf("%s",prompt);
status=scanf("%f", &answer);
if(status!=1)
{
fflush(stdin);
printf("INPUT ERROR!\n");
}
}
while(status!=1);
return answer;
}
You never call the function root() so it will never be executed. Put the function call somewhere before return 0; of main():
root(a, b, c);
Also, fix the printf() calls as mentioned above.
I'm not sure if this will fix everything but in your code you have your print statements formatted incorrectly. For example, this line:
printf("%.2f and %.2f,x1 , x2");
Should be printf("%.2f and %.2f", x1, x2);
The variables whose values you are trying to use should be outside of the quotation marks. Hopefully this helps.
You have several errors.
You never call root().
root is declared to return float, but it doesn't return anything, it just prints the roots. It should be declared void.
You have mistakes in many of your printf() calls. When you're displaying the equation, you have |n instead of \n, and %+f instead of +%f. When you're displaying the roots, you have the variables that you want to print inside the format string, instead of as separate arguments to printf.
Here's the corrected code.
#include <math.h>
#include <stdio.h>
#include <stdlib.h>
float userinput(char prompt[]); //Function Prototype
void root(float a, float b, float c);
int main()
{
float a,b,c;
a=userinput("Enter the value for a:"); //Function Call
b=userinput("Enter the value for b:");
c=userinput("Enter the value for c:");
printf("The Equation you entered is \n%fx^2+%fx+%f=0\n", a, b, c);
root(a, b, c);
return 0;
}
void root(float a, float b, float c)
{
float D,x,x1,x2,x3,x4;
D = b*b - 4*a*c;
if(D>0)
{
printf("There are two real roots, the roots are: ");
x1 = ((-b+(sqrt(D)))/(2*a));
x2 = ((-b-(sqrt(D)))/(2*a));
printf("%.2f and %.2f" ,x1 , x2);
}
if(D==0)
{
printf("There is one real root, the root is: ");
x = ((-b)/(2*a));
printf("%.2f",x);
}
if(D<0)
{
printf("There are two imaginary roots. The roots are: ");
x3 = ((-b/2*a)+(sqrt(fabs(D))/(2*a)));
printf("%.2fi and ", x3);
x4 = ((-b/2*a)-(sqrt(fabs(D))/(2*a)));
printf("%.2fi", x4);
}
}
float userinput(char prompt[]) //Function definition
{
float answer;
int status;
do
{
printf("%s",prompt);
status=scanf("%f", &answer);
if(status!=1)
{
fflush(stdin);
printf("INPUT ERROR!\n");
}
}
while(status!=1);
return answer;
}
DEMO
I've a problem with a function in my calculator-program. The function returns me back only 0 values. I want that:
Input:3+4
Output:7
I have worked with pointers to use the call by reference method. Please give me some tips.
The mistake is in the function readcalc. If I write the whole syntax in the main program it works.
Here is my code.
#include "stdafx.h"
#include <stdio.h>
#include <stdlib.h>
double readcalc(double*,char*,double*);
double addition(double,double);
double subtraction(double,double);
double multiplication(double,double);
double division(double,double);
int main()
{
double a=0, b=0;
char op='R', restart = 'Y';
while (restart != 'N')
{
readcalc(&a,&op,&b);
printf("%lf%lf", a, b);
printf("\n ---CALCULATOR--- \n\n\n");
switch (op)
{
case '+':printf("%lf + %lf = %lf\n", a, b, addition(a, b)); break;
case '-':printf("%lf - %lf = %lf\n", a, b, subtraction(a, b)); break;
case '*':printf("%lf * %lf = %lf\n", a, b, multiplication(a, b)); break;
case '/':printf("%lf / %lf = %lf\n", a, b, division(a, b)); break;
default:printf("bad operator!");
}
printf("New Calc? (Y,N) \n");
fflush(stdin);
scanf("%c", &restart);
if (restart != 'Y'&&restart != 'N')
{
printf("Bad input!");
}
}
fflush(stdin);
getchar();
return 0;
}
double readcalc(double* x,char* opp,double* y)
{
printf("\n Type your calculation!(z.B.4+7)\n");
scanf("%lf%c%lf", &x, &opp, &y);
return 0;
}
double addition(double a,double b)
{
double c = 0;
c = a + b;
return c;
}
double subtraction(double a, double b)
{
double c = 0;
c = a - b;
return c;
}
double multiplication(double a, double b)
{
double c = 0;
c = a*b;
return c;
}
double division(double a, double b)
{
double c = 0;
c = a / b;
return c;
}
What can I change?
The problem with readcalc is that you pass the pointer to the pointer as argument to scanf. The variables are already pointers, so you don't have to use the address-of operator to get a pointer, as then you get pointers to the pointers.
Also be careful with the scanf format, as the "%c" format doesn't skip leading whitespace, so if you enter e.g. 1 +2 then the scanf call will not be able to read the operator or the second number.
void readcalc(double* x,char* opp,double* y)
{
printf("\n Type your calculation!(z.B.4+7)\n");
scanf("%lf%c%lf", x, opp, y); // <== no &'s
}
Your readcalc function invokes
scanf("%lf%c%lf", &x, &opp, &y);
on pointers, int *x, etc...
When you place it inline in main, it works on the addresses of the variables.
Change it to
scanf("%lf%c%lf", x, opp, y);
At a suitable warning level, you may have seen warning.
While you are there, readcalc returns a double, which you never use. Perhaps it should simply be void?