I am installing SQL server on my CentOS 7 server, for installing I used Microsoft docs. But after starting it it will not start.
After running systemctl status mssql-server command it says:
mssql-server.service - Microsoft SQL Server Database Engine
Loaded: loaded (/usr/lib/systemd/system/mssql-server.service; disabled; vendor preset: disabled)
Active: failed (Result: start-limit) since Sat 2022-10-22 09:36:08 UTC; 1min 32s ago
Docs: https://docs.microsoft.com/en-us/sql/linux
Process: 3894 ExecStart=/opt/mssql/bin/sqlservr (code=exited, status=1/FAILURE)
Main PID: 3894 (code=exited, status=1/FAILURE)
Unit mssql-server.service entered failed state.
mssql-server.service failed.
mssql-server.service holdoff time over, scheduli...rt.
Stopped Microsoft SQL Server Database Engine.
start request repeated too quickly for mssql-ser...ice
Failed to start Microsoft SQL Server Database Engine.
Unit mssql-server.service entered failed state.
mssql-server.service failed.
And this is from logs:
/opt/mssql/bin/sqlservr: /lib64/libc.so.6: version `GLIBC_2.18' not found (required by /opt/mssql/bin/sqlservr)
/opt/mssql/bin/sqlservr: /lib64/libc.so.6: version `GLIBC_2.27' not found (required by /opt/mssql/bin/sqlservr)
/opt/mssql/bin/sqlservr: /lib64/libc.so.6: version `GLIBC_2.18' not found (required by /opt/mssql/bin/../lib/libc++abi.so.1)
Related
I started having this issue today on our production sql server. I have tried a variety of different fixes proposed online. We are using MSSQL server 2017 (14.0.3257.3-13). I'm out of ideas on what could be causing the server to crash. Below is the recent crash log.
This program has encountered a fatal error and cannot continue running at Sat Feb 1 14:21:21 2020
The following diagnostic information is available:
Reason: 0x00000007
Status: 0xc000014c
Message: Corruption detected in persistent registry: \SystemRoot\security.hiv.
Stack Trace:
000000006b137250
000000006b1345bf
000000006b1347a3
000000006b1337d3
000000006b1326f2
000000006b175c31
Process: 8815 - sqlservr
Thread: 8819 (application thread 0x4)
Instance Id: e5a2f812-0426-4d92-b9b2-1db1e60d957c
Crash Id: 60073e70-4042-4275-9fcd-a05ae84d26f5
Build stamp: 9726a6583fe7826f57b03fd1c7adf12bebe7692cb64630fccb0541c06820af4d
Distribution: Ubuntu 16.04.6 LTS
Processors: 9
Total Memory: 8589934592 bytes
Timestamp: Sat Feb 1 14:21:21 2020
Last errno: 2
Last errno text: No such file or directory
Thank you for the ideas, Toret.
I have faced the same issue, but I solved it just by deleting the security.hiv file.
rm /var/opt/mssql/.system/system/security.hiv
After that the mssql-server service started normaly.
After working through multiple proposed solutions online nothing worked. Some of the things I tried:
Upgrading mssql-server to latest version.
Repairing missing files or dependencies.
Changing access permissions to the directory.
Elevating access permissions for the mssql user.
Changing user access to root for the .hiv files located in the mssql .system/system folder
The only way to for me to get it to work was to:
Delete all the folders manually from /var/opt/mssql/ except for the
data folder.
Re-link python from 3.5 to 2.7
Then I downgraded the mssql-server version to Microsoft SQL Server 2017 14.0.3192.2.
Run the sudo /opt/mssql/bin/mssql-conf setup
**Python Re-link**
sudo rm /user/bin/python
sudo ln -s /user/bin/python[version] /user/bin/python
After that everything worked again.
I have installed mssql on Ubuntu 16.04. following are the details of sql server.
ms sql (14.0.3015.40-1) i.e SQL server 2017.
when I run the configuration command #sudo /opt/mssql/bin/sqlservr-setup
I got error sudo: /opt/mssql/bin/sqlservr-setup: command not found
I have stopped and restarted but of no use.
When I check the status by command #systemctl status mssql-server
I got
mssql-server.service - Microsoft SQL Server Database Engine
Loaded: loaded (/lib/systemd/system/mssql-server.service; enabled; vendor preset: enabled)
Active: inactive (dead) (Result: exit-code) since Fri 2018-02-02 16:15:29 IST; 4min 20s ago
Docs: https://learn.microsoft.com/en-us/sql/linux
Process: 28050 ExecStart=/opt/mssql/bin/sqlservr (code=exited, status=200/CHDIR)
Main PID: 28050 (code=exited, status=200/CHDIR)
Feb 02 16:15:28 chetan-desktop systemd[1]: mssql-server.service: Unit entered failed state.
Feb 02 16:15:28 chetan-desktop systemd[1]: mssql-server.service: Failed with result 'exit-code'.
Feb 02 16:15:29 chetan-desktop systemd[1]: mssql-server.service: Service hold-off time over, scheduling restart.
Feb 02 16:15:29 chetan-desktop systemd[1]: Stopped Microsoft SQL Server Database Engine.
Feb 02 16:15:29 chetan-desktop systemd[1]: mssql-server.service: Start request repeated too quickly.
Feb 02 16:15:29 chetan-desktop systemd[1]: Failed to start Microsoft SQL Server Database Engine.
I have googled and tried all possible options. But unable to start SQL server.
Please guide me through this.
I had the same two problems.
First, I was referencing very old documentation that applied to an early (preview) release for RHEL, and so I was using the wrong command. The correct command is:
/opt/mssql/bin/mssql-conf setup
Second, the service was failing to start because my virtual machine did not have enough RAM available (SQL Server on Linux requires at least 2GiB of RAM available.) The documentation I was referred to incorrectly stated that only 0.5GiB was required, this is incorrect and journalctl was not providing any useful information about the start failure.
After configuring available memory to 2GiB and using the correct mssql-conf command I was able to successfully configure and start an MSSQL Server instance on Linux.
References:
Configure SQL Server on Linux with the mssql-conf tool (Microsoft Docs)
KB052969: FIX: Minimum memory limit set to 2GB to install or start SQL Server 2017 (Microsoft Support)
Installation guidance for SQL Server on Linux (Microsoft Docs)
The error says that the executable wasn't found in this path, not that the service couldn't start.
According to the installation instructions for Ubuntu you need to run mssql-conf setup to configure the server :
sudo /opt/mssql/bin/mssql-conf setup
not sqlservr-setup
Increasing the RAM size to 3GB on my VM resolved the issue for me.
When I installed MS SQL Server for Linux half a year ago, there was no way to choose between evaluation and developer. Now the evaluation period has expired and I can't install a developer version. I don't care about any of my databases and I have tried to remove SQL Server before installing it again. The installation is fine but when I run mssql-conf setup I get the following:
Configuring SQL Server...
Error: The evaluation period has expired.
This program has encountered a fatal error and cannot continue running.
The following diagnostic information is available:
Reason: 0x00000001
Signal: SIGSEGV - Segmentation fault (11)
Stacktrace: 0000564434051ee7 00007f9892387b20 00005644340236c2
000056443404a8db 000056443404a059
Process: 7228 - sqlservr
Thread: 7253 (application thread 0x1060)
Instance Id: 357ebf86-214d-4100-b14f-cb62b380917e
Crash Id:
Build stamp: 3db4cdd88f9bbf816f82e0ab6e17825a0a0f8b2ef98a5c67b521be0ed19c297c
/opt/mssql/lib/mssql-conf/invokesqlservr.sh: line 15: 7227 Aborted sudo -EH -u mssql /bin/bash -c "$CMDLINE"
Setup has completed successfully. SQL Server is now starting.
The last line is wrong, SQL Server does not start.
I assume that uninstallation leaves some trace of my old evaluation that is detected when I try to set up the new developer installation. Anyone knows if there is a way to get rid of whatever is blocking the new install?
TIA,
Gunnar
Shane's comment answered the question. Replacing the repository according to https://learn.microsoft.com/en-us/sql/linux/quickstart-install-connect-suse did the trick!
I followed the instructions to install Sql server natively on my machine which runs linux mint sonya based off ubuntu xenial.
Ive had no trouble installing the service:
$ systemctl status mssql-server
● mssql-server.service - Microsoft SQL Server Database Engine
Loaded: loaded (/lib/systemd/system/mssql-server.service; disabled; vendor preset: enabled)
Active: active (running) since Wed 2017-09-27 17:13:12 PDT; 18s ago
Docs: https://learn.microsoft.com/en-us/sql/linux
Main PID: 4139 (sqlservr)
Tasks: 158
Memory: 877.1M
CPU: 4.543s
CGroup: /system.slice/mssql-server.service
├─4139 /opt/mssql/bin/sqlservr
└─4150 /opt/mssql/bin/sqlservr
When trying to connect the the DB, i get this error:
$ sqlcmd -S localhost
Sqlcmd: Error: Microsoft ODBC Driver 13 for SQL Server : Data source name not found, and no default driver specified.
Turns out after all that I did not install the unixodbc-dev package. The error message kind of threw me off.
I am trying to install JDE EnterpiriseOne on a virtual machine running win7, i followed the instructions in this video :
JDE 9.1 stanalone instalation toturial
I installed "EnterpiriseOne Database Engine" of course after installing oracle client, but i cannot continue to install the "EnterpiriseOne E910 Standalone client"...
it seems to be a problem with the oracle universal Universal installer finding a running Database, i checked the listener services and found that they are running...
typed the command (lsnrctl status) in cmd, and got the following:
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 27-JUL-2013 18:38
:12
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.119.128)(PORT=15
21)))
TNS-12535: TNS:operation timed out
TNS-12560: TNS:protocol adapter error
TNS-00505: Operation timed out
64-bit Windows Error: 60: Unknown error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 27-JUL-2013 17:14:33
Uptime 0 days 1 hr. 24 min. 1 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File c:\Oracle\E1Local\network\admin\listener.ora
Listener Log File c:\oracle\diag\tnslsnr\WIN-I3MMKFMQE20\listener\alert\
log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.119.128)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
PLZ anyone what can i do to complete the instalation???
On your tnsnames.ora and listener.ora try to change the HOST value for 127.0.0.1. Then restart the database and the listener services.
Instead of 127.0.0.1 change it to hostname. It worked fine for me after changing this to hostname.