Suppose I have an say NxM called Image, and I have 3 1xK arrays, x_array, y_array, z_array where x_array and y_array represent index values and z_array represents value to insert, ex:
Image[y_array[0], x_array[0]] = z_array[0]
What is the best way to do this?
You can directly index using the arrays:
Image[x_array, y_array] = z_array
Related
If I have a square matrix of arrays such as:
[1,2], [2,3]
[5,9], [1,4]
And I want to get the mean of the first values in the arrays of each row such:
1.5
3
Is this possible in Matlab?
I've used the mean(matrix, 2) command to do this with a matrix of single values, but I'm not sure how to extend this to deal with the arrays.
Get the first elements in all arrays of matrix, then call mean function
mean(matrix(:,:,1))
maybe you need to reshape before call mean
a = matrix(:,:,1);
mean(a(:))
You can apply mean function inside mean function to get the total mean value of the 2D array at index 1. You can do similary with array at index 2. Consider the following snapshot.
After staring at your problem for a long time, it looks like your input is a 3D matrix where each row of your formatting corresponds to a 2D matrix slice. Therefore, in proper MATLAB syntax, your matrix is actually:
M = cat(3, [1,2; 2,3], [5,9; 1,4]);
We thus get:
>> M = cat(3, [1,2; 2,3], [5,9; 1,4])
M(:,:,1) =
1 2
2 3
M(:,:,2) =
5 9
1 4
The first slice is the matrix [1,2; 2,3] and the second slice is [5,9; 1,4]. From what it looks like, you would like the mean of only the first column of every slice and return this as a single vector of values. Therefore, use the mean function and index into the first column for all rows and slices. This will unfortunately become a singleton 3D array so you'll need to squeeze out the singleton dimensions.
Without further ado:
O = squeeze(mean(M(:,1,:)))
We thus get:
>> O = squeeze(mean(M(:,1,:)))
O =
1.5000
3.0000
A fourier analysis I'm doing outputs 5 data fields, each of which I've collected into 1-d numpy arrays: freq bin #, amplitude, wavelength, normalized amplitude, %power.
How best to structure the data so I can sort by descending amplitude?
When testing with just one data field, I was able to use a dict as follows:
fourier_tuples = zip(range(len(fourier)), fourier)
fourier_map = dict(fourier_tuples)
import operator
fourier_sorted = sorted(fourier_map.items(), key=operator.itemgetter(1))
fourier_sorted = np.argsort(-fourier)[:3]
My intent was to add the other arrays to line 1, but this doesn't work since dicts only accept 2 terms. (That's why this post doesn't solve my issue.)
Stepping back, is this a reasonable approach, or are there better ways to combine & sort separate arrays? Ultimately, I want to take the data values from the top 3 freqs and associated other data, and write them to an output data file.
Here's a snippet of my data:
fourier = np.array([1.77635684e-14, 4.49872050e+01, 1.05094837e+01, 8.24322470e+00, 2.36715913e+01])
freqs = np.array([0. , 0.00246951, 0.00493902, 0.00740854, 0.00987805])
wavelengths = np.array([inf, 404.93827165, 202.46913583, 134.97942388, 101.23456791])
amps = np.array([4.33257766e-16, 1.09724890e+00, 2.56328871e-01, 2.01054261e-01, 5.77355886e-01])
powers% = np.array([4.8508237956526163e-32, 0.31112370227749603, 0.016979224022185751, 0.010445983875848858, 0.086141014686372669])
The last 4 arrays are other fields corresponding to 'fourier'. (Actual array lengths are 42, but pared down to 5 for simplicity.)
You appear to be using numpy, so here is the numpy way of doing this. You have the right function np.argsort in your post, but you don't seem to use it correctly:
order = np.argsort(amplitudes)
This is similar to your dictionary trick only it computes the inverse shuffling compared to your procedure. Btw. why go through a dictionary and not simply a list of tuples?
The contents of order are now indices into amplitudes the first cell of order contains the position of the smallest element of amplitudes, the second cell contains the position of the next etc. Therefore
top5 = order[:-6:-1]
Provided your data are 1d numpy arrays you can use top5 to extract the elements corresponding to the top 5 ampltiudes by using advanced indexing
freq_bin[top5]
amplitudes[top5]
wavelength[top5]
If you want you can group them together in columns and apply top5 to the resulting n-by-5 array:
np.c_[freq_bin, amplitudes, wavelength, ...][top5, :]
If I understand correctly you have 5 separate lists of the same length and you are trying to sort all of them based on one of them. To do that you can either use numpy or do it with vanilla python. Here are two examples from top of my head (sorting is based on the 2nd list).
a = [11,13,10,14,15]
b = [2,4,1,0,3]
c = [22,20,23,25,24]
#numpy solution
import numpy as np
my_array = np.array([a,b,c])
my_sorted_array = my_array[:,my_array[1,:].argsort()]
#vanilla python solution
from operator import itemgetter
my_list = zip(a,b,c)
my_sorted_list = sorted(my_list,key=itemgetter(1))
You can then flip the array with my_sorted_array = np.fliplr(my_sorted_array) if you wish or if you are working with lists you can reverse it in place with my_sorted_list.reverse()
EDIT:
To get first n values only, you have to simply slice the array similarly to what #Paul is suggesting. Slice is done in a similar manner to classic list slicing by specifying start:stop:step (you can omit the step) arguments. In your case for 5 top columns it would be [:,-5:]. So in the example above you can take top 2 columns from each row like this:
my_sliced_sorted_array = my_sorted_array[:,-2:]
result will be:
array([[15, 13],
[ 3, 4],
[24, 20]])
Hope it helps.
I need to create an array filled within a range in Matlab
e.g.
from=2
to=6
increment=1
result
[2,3,4,5,6]
e.g.
from=15
to=25
increment=2
result
[15,17,19,21,23,25]
Obviously I can create a loop to perform this action from scratch but I wondering if there is a coincise and efficent way to do this with built-in matlab commands since seems a very common operation
EDIT
If I use linspace the operation is weird since the spacing between the points is (x2-x1)/(n-1).
This can be handled simply by the : operator in the following notation
array = from:increment:to
Note that the increment defaults to 1 if written with only one colon seperator
array = from:to
Example
array1 = 2:6 %Produces [2,3,4,5,6]
array2 = 15:2:25 %Produces [15,17,19,21,23,25]
I have an N-dimensional array of items whose last dimension is the index of the array.
For example, if the array A contained images, then A(:,:,:,1) would be the first image, A(:,:,:,2) would be the second image, and so forth.
Similarly, if the array just contained integers, then A(:,1) would be the first integer, A(:,2) would be the second integer, and so forth.
-=-=-=-
What I'm trying to do is delete the first item from A when I do not know ahead of time what dimensionality it is.
If A contains images, I want to do this:
A(:,:,:,1) = [];
If A contains integers, I want to do this:
A(:,1) = [];
The problem is since I don't know what dimensionality it is, I don't know how many colons to put, and I don't know how to denote "N-1 colons here" in Matlab.
I'm hoping there is a programmatic way to do this, but I frankly have no idea what to search for if this is possible.
You can either use cell to comma-separated list expansion:
%// Build cell: {':', ':', ..., ':', [1]}
I(1:ndims(A)-1) = {':'};
I{ndims(A)} = 1;
%// Expand cell to comma separated list and delete:
A(I{:}) = [];
Or convert to cell using num2cell and then convert back using cell2mat:
C = num2cell(A,1:ndims(A)-1);
A = cell2mat(C(2:end));
I guess that unless you really need n-dimensional arrays, doing this with a cell array of n-1 dimensional arrays instead (as is C in the above code) should be a smart move in terms of simplicity of notation.
I'm quite new to MatLab and this problem really drives me insane:
I have a huge array of 2 column and about 31,000 rows. One of the two columns depicts a spatial coordinate on a grid the other one a dependent parameter. What I want to do is the following:
I. I need to split the array into smaller parts defined by the spatial column; let's say the spatial coordinate are ranging from 0 to 500 - I now want arrays that give me the two column values for spatial coordinate 0-10, then 10-20 and so on. This would result in 50 arrays of unequal size that cover a spatial range from 0 to 500.
II. Secondly, I would need to calculate the average values of the resulting columns of every single array so that I obtain per array one 2-dimensional point.
III. Thirdly, I could plot these points and I would be super happy.
Sadly, I'm super confused since I miserably fail at step I. - Maybe there is even an easier way than to split the giant array in so many small arrays - who knows..
I would be really really happy for any suggestion.
Thank you,
Arne
First of all, since you wish a data structure of array of different size you will need to place them in a cell array so you could try something like this:
res = arrayfun(#(x)arr(arr(:,1)==x,:), unique(arr(:,1)), 'UniformOutput', 0);
The previous code return a cell array with the array splitted according its first column with #(x)arr(arr(:,1)==x,:) you are doing a function on x and arrayfun(function, ..., 'UniformOutput', 0) applies function to each element in the following arguments (taken a single value of each argument to evaluate the function) but you must notice that arr must be numeric so if not you should map your values to numeric values or use another way to select this values.
In the same way you could do
uo = 'UniformOutput';
res = arrayfun(#(x){arr(arr(:,1)==x,:), mean(arr(arr(:,1)==x,2))), unique(arr(:,1)), uo, 0);
You will probably want to flat the returning value, check the function cat, you could do:
res = cat(1,res{:})
Plot your data depends on their format, so I can't help if i don't know how the data are, but you could try to plot inside a loop over your 'res' variable or something similar.
Step I indeed comes with some difficulties. Once these are solved, I guess steps II and III can easily be solved. Let me make some suggestions for step I:
You first define the maximum value (maxValue = 500;) and the step size (stepSize = 10;). Now it is possible to iterate through all steps and create your new vectors.
for k=1:maxValue/stepSize
...
end
As every resulting array will have different dimensions, I suggest you save the vectors in a cell array:
Y = cell(maxValue/stepSize,1);
Use the find function to find the rows of the entries for each matrix. At each step k, the range of values of interest will be (k-1)*stepSize to k*stepSize.
row = find( (k-1)*stepSize <= X(:,1) & X(:,1) < k*stepSize );
You can now create the matrix for a stepk by
Y{k,1} = X(row,:);
Putting everything together you should be able to create the cell array Y containing your matrices and continue with the other tasks. You could also save the average of each value range in a second column of the cell array Y:
Y{k,2} = mean( Y{k,1}(:,2) );
I hope this helps you with your task. Note that these are only suggestions and there may be different (maybe more appropriate) ways to handle this.