[root#host134 opengauss]#/soft/opengauss/script/gs_preinstall -U omm -G dbgrp -X /tmp/cluster_config_template.xml
[GAUSS-51405] : You need to install software:expect
When installing openguass, the pre-check reported this error, how to solve it?
Lack of dependency package, install it for a try：
yum install expect
Related
I installed SQLserver in my ubuntu. But when I install sqlserver-tool something happened.
type
sudo apt-get install unixodbc-dev
return
eading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
unixodbc-dev : Depends: unixodbc (= 2.3.7)
Depends: odbcinst1debian2 (= 2.3.7) but 2.3.6-0.1build1 is to be installed
E: Unable to correct problems, you have held broken packages.
so that I tried below
sudo apt-get install unixodbc
returns
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
unixodbc : Depends: odbcinst1debian2 (>= 2.3.7) but 2.3.6-0.1build1 is to be installed
Depends: libodbc1 (>= 2.3.7) but 2.3.6-0.1build1 is to be installed
E: Unable to correct problems, you have held broken packages.
and lastly
sudo apt-get install odbcinst1debian2
return
eading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
odbcinst1debian2 : PreDepends: multiarch-support but it is not installable
E: Unable to correct problems, you have held broken packages.
I completely stacked and have no idea at all.
Dose anybody can help for me. Thanks.
User rim96 has right, the reason is that Microsoft's source list includes unixodbc in higer version (2.3.7) that depends on multi-arch (unlike Ubuntu's version 2.3.6)
I think that unixodbc 2.3.6 is good enough. In my case the follow steps helped me.
Remove Microsoft's source list.
mv /etc/apt/sources.list.d/mssql-tools.list ~/
Update sources
sudo apt-get update
Install unixodbc 2.3.6 from Ubuntu repository
sudo apt-get install unixodbc
Move Microsoft's source list back
mv ~/mssql-tools.list /etc/apt/sources.list.d/
Update sources again
sudo apt-get update
Install mssq-tools (or whatever you want) from Microsoft's repository
sudo apt-get install mssql-tools
User Jiří Chmiel's answer helped a lot, though I changed two lines to:
sudo mv /etc/apt/sources.list.d/msprod.list ~/
and:
sudo mv ~/msprod.list /etc/apt/sources.list.d/
was what worked for me
(Ubuntu 20.04 in Dec '20)
This problems looks like you forgot to run sudo apt-get update before installing odbcinst1debian2. On focal this package does not depend on multiarch-support.
From https://askubuntu.com/questions/1232332/installing-odbcins1debian2-broken-dependency-on-ubuntu-20-04-lts
If you follow Microsoft install guide for SQL Server Tools, for Ubuntu it says
If you are using Ubuntu 18.04 or Ubuntu 20.04, change the repository path in step 2 below from /ubuntu/16.04 to /ubuntu/18.04 or /ubuntu/20.04
So in step 2, you should do
curl https://packages.microsoft.com/config/ubuntu/20.04/prod.list | sudo tee /etc/apt/sources.list.d/msprod.list
instead of
curl https://packages.microsoft.com/config/ubuntu/16.04/prod.list | sudo tee /etc/apt/sources.list.d/msprod.list
I am trying to install wxPython on a new installation of Ubuntu 18.04 using the command
pip3 install wxPython
The build fails with
error: [Errno 2] No such file or directory: 'build/lib.linux-x86_64-3.6/wx/libwx_baseu-3.0.so'
----------------------------------------
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-30uqzd2e/wxPython/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-hynl659w-record/install-record.txt --single-version-externally-managed --compile --user --prefix=" failed with error code 1 in /tmp/pip-build-30uqzd2e/wxPython/
I have no idea where to look for a solution. Can someone please suggest where I might start
[EDIT 20200424 08:06]
I looked in
/usr/lib/x86_64-linux-gnu/
and
libwx_baseu-3.0.so.0
was absent. I have installed it from this site
It is now present, but the install fails with the same message
I have managed to install wxPython.
I reinstalled Ubuntu 18.04 and performed the following:
sudo apt install make gcc libgtk-3-dev libwebkitgtk-dev libwebkitgtk-3.0-dev libgstreamer-gl1.0-0 freeglut3 freeglut3-dev python-gst-1.0 python3-gst-1.0 libglib2.0-dev ubuntu-restricted-extras libgstreamer-plugins-base1.0-dev
pip3 install wxpython
I guess that when it was failing I had tried many fixes and somewhere along the line something was corrupted or there was a mismatch somewhere.
My solution was based on this answer
I Installed wx.python 4.1.0 yesterday with:
URL=https://extras.wxpython.org/wxPython4/extras/linux/gtk2/ubuntu-18.04
pip install -U -f $URL wxPython
See: https://extras.wxpython.org/wxPython4/extras/ for details.
For gtk3 simply replace gtk2 in the url above.
I have Install php 7.3 and apache2 but when I try to start apache2 , I have this error :
service apache2 start
apache2: Syntax error on line 146 of /etc/apache2/apache2.conf: Syntax error on line 3 of /etc/apache2/mods-enabled/php7.3.load: Cannot load /usr/lib/apache2/modules/libphp7.3.so into server: /usr/lib/apache2/modules/libphp7.3.so: cannot open shared object file: No such file or directory
I really don't know how to resolve this problem, I have tried to remove and reinstall without success.
You're getting that error because the PHP 7.3 library for Apache is not installed.
sudo apt install -y libapache2-mod-php7.3
The above command should fix it.
It solved my problem:
sudo add-apt-repository ppa:ondrej/php
sudo apt-get update
sudo apt-get install php7.3
sudo apt-get install php7.3-cli php7.3-common php7.3-json php7.3-opcache php7.3-mysql php7.3-mbstring php7.3-zip php7.3-fpm php7.3-intl php7.3-simplexml
sudo service apache2 restart
For me the problem was that I did not install apache tools for php.
On arch linux:
yaourt -S php-apache
After that, module appeared in the folder.
The best way not to make a mistake is to follow guide: https://wiki.archlinux.org/title/Apache_HTTP_Server#PHP
I am trying install wxhaskell on ubuntu
(and I have already installed wxwidget and it works well in codeblock)
I run cabal install wxc in terminal
and here is output
/tmp/wxc-0.92.1.1-2711/wxc-0.92.1.1/Setup.hs:25:8:
Could not find module Distribution.Compat.Exception
It is a member of the hidden package Cabal-1.22.5.0.
it is a hidden module in the package Cabal-1.16.0
Use -v to see a list of the files searched for.
Failed to install wxc-0.92.1.1
cabal: Error: some packages failed to install:
wxc-0.92.1.1 failed during the configure step. The exception was:
ExitFailure 1
actually, I can find Distribution.Compat.Exception
and I tried sudo ghc-pkg expose Cabal-1.16.0
sudo ghc-pkg expose Cabal-1.22.5.0 but nothing changed
someone help me out, great thanks!
If you are using ubuntu I think I have a solution. If you install GHC in ubuntu via "apt-get install ghc", all ghc packages are installed in /usr/lib/ghc/xyz. If you have installed ghc manually, not with a package manager, I don't know a solution.
Try this:
sudo cabal install cabal-install --global
Then do all the wxHaskell specific cabal installs the same way. So:
sudo cabal install wxdirect --global
sudo cabal install wxc --global
...
If this doesn't work, try this:
rm -rf ~/.ghc
I'm trying install varnish agent on ubuntu server using virtual box. There is a message in the middle installation process that say "you need rst2man installed to make dist".
When I tried install rst2man using "sudo apt-get install rst2man" another message come in :
Reading package list....done
Building dependecy tree
Reading state information....done
E: unable to locate package rst2man
"unable to locate package rst2man" what does it mean ? anyone know ? please help.
Problem fix:
I tried to install python-docutils for the rst2man.
rst2man is a virtual package, then you need install python-docutils package than provide rst2man and utilities for the documentation of Python modules.
sudo apt-get install python-docutils
After install this package, try the command:
sudo which rst2man
python-docutils wasn't working for me
I had to install the package docutils-common
sudo apt-get install docutils-common
In case if you installing varnish-agent-2 - after
sudo apt-get install python-docutils
you should execute again
./configure
Working on CentOS and likely RHEL as well:
yum install python-docutils