I need to use fgets to read multiple lines of stdin that are separated by newlines (ex.
Hello
world
!
). If I include fgets in a for loop, will it read from the first line during every iteration? If so, how would I go about achieving this?
Will fgets always read from the beginning of the string?
No. fgets() reads based on the current state, which might be partially into a line of user input. It does not somehow magically go back to the beginning - just starts from where the stream is currently positioned..
fgets() does not read strings. It read a line of input and converts the input into a string. #Fe2O3. It does not stop when a null character is read.
fgets() reads until:
An '\n' is read.
The size - 1 passed in fgets() is met.
An end-of-file or input error is encountered (e.g. wrong stream mode, parity error, phase of the moon input error, ...)
If I include fgets in a for loop, will it read from the first line during every iteration? If so, how would I go about achieving this?
First before using fgets(), be sure the entire prior line was read.
2nd: if this line of input after using fgets() was incomplete, finish it.
char buf[N];
if (fgets(buf, sizeof buf, stdin) {
size_t len = strlen(buf);
if (len + 1 == sizeof buf && buf[sizeof buf - 2] != '\n')) {
// User input is not complete, read rest of line.
int ch;
while ((ch = getchar() != '\n') ** ch != EOF) {
;
}
}
Pedantic: fgets() is not a great input function if input might include null characters. In that case, more advance techniques are needed.
Related
I found this code that clears the input buffer, but I don't really understand how it works.
Can anybody explain it in a simple way?
do{
fgets(string,LENGTH,stdin);
} while (strlen(string) > 0 && string[strlen(string) - 1] != '\n');
It's a misnomer to say that it "clears the input buffer". What it does is advance to the next line of input.
The code is a do/while loop. It assumes a char array called string that is at least LENGTH in size.
The body of the loop reads as much of a line as it can, up to LENGTH - 1 characters:
fgets(string,LENGTH,stdin);
The return value from fgets() is ignored - this is a bug, because it can mean that string is not assigned to in a failure case (such as EOF) and we could loop forever.
The condition of the loop checks to see whether we have read up to the end-of-line. There's a test that the string has at least one character (which it will if fgets() was successful) and then compares the last character to a newline:
while (strlen(string) > 0 && string[strlen(string) - 1] != '\n')
If we see a newline, then fgets() has read the rest of the line; if not, it read LENGTH-1 characters from a longer input line, and there's still input to consume, so continue looping.
Fixed version:
while (fgets(string, LENGTH, stdin) && string[strlen(string) - 1] != '\n')
;
Simpler alternative:
scanf("%*[^\n]%*c");
Note that in both cases, any stream error will remain, to be detected on the next attempt at input.
while (strlen(string) > 0 && string[strlen(string) - 1] != '\n');. So, do fgets while the length of string is larger than 0 (that is, while there are characters waiting in the input stream) AND ALSO while the end of the string does not equal newline. If the end of the input equals newline, stop. I am not sure why this code does not go ahead and eat up the newline while it is at it, but it is safe because all standard reading functions ignore the intial newline. #barmar had a good suggestion though (Because fgets() reads from the input buffer. If there's data in the buffer that hasn't been read, fgets() doesn't need to wait for the user to type anything.) But they differ in whether or not they ignore the trailing newline (generated when you press ENTER). fgets keeps the trailing newline, but gets strips it off.
I'm trying to read a line from stdin but I don't know to properly handle the cases when input size is at least equal to the limit. Example code:
void myfun() {
char buf[5];
char somethingElse;
printf("\nInsert string (max 4 characters): ");
fgets (buf, 5, stdin);
...
printf("\nInsert char: ");
somethingElse = getchar();
}
Now, the user can do three things:
Input less than 4 characters (plus newline): in this case there's nothing left in stdin and the subsequent getchar() correctly waits for user input;
Input exactly 4 characters (plus newline): in this case there's a newline left in stdin and the subsequent getchar() reads it;
Input more than 4 characters (plus newline): in this case there's at least another character left in stdin and the subsequent getchar() reads it, leaving at least a newline in.
Cases 2 and 3 would require emptying stdin using something like while(getchar() != '\n'), whereas case 1 doesn't require any additional action. As I understand from reading answers to similar questions and c-faq, there's no standard/portable way to know whether the actual scenario is the one described in 1 or not.
Did I get it well? Or there actually is a portable way to do it? Or maybe a totally different approach?
The fgets function will store the newline in the buffer if there is room for it. So if the last character in the string is not a newline, you know you need to flush the buffer.
fgets (buf, 5, stdin);
if (strrchr(buf, '\n') == NULL) {
// flush buffer
int c;
while ((c = getchar()) != '\n') && (c != EOF));
}
If ones assumes that a null character '\0' is never read, then #dbush answer will work.
If a null character is read, then strrchr(buf, '\n') does not find any '\n' that may have been read.
Code could pre-set the buffer to see if a '\n' was read in the end.
buf[sizeof buf - 2] = '\n';
if (fgets (buf, sizeof buf, stdin)) {
if (strrchr(buf, '\n') == NULL) {
// incomplete line read. (the usual detection)
} else if (buf[sizeof buf - 2] != '\n') {
// incomplete line read with prior null character (see below note).
}
}
Yet the C standard does not specify that data past what was read in buf[] is unchanged, pre-filling the buffer with some pattern is not sufficient to detect if a null character '\0' was read.
is a portable way to do it?
The most portable way is to use repeated calls to fgetc() or the like instead of fgets().
maybe a totally different approach?
I recommend fgetc() or the common but not C standard getline()
Another alternative: Use scanf("%4[^\n]%n", buf, &n): It is very cumbersome, yet a portable way is possible. It keeps track of the number of characters read before the '\n' even if some are null characters.
int n = 0;
cnt = scanf("%4[^\n]%n", buf, &n); // Cumbersome to get that 4 here.
// Lots of TBD code now needed:
// Handle if cnt != 1 (\n to be read or EOF condition)
// Handle if n == sizeof buf - 1, (0 or more to read)
// Handle if n < sizeof buf - 1, (done, now get \n)
// A \n may still need to be consumed
// Handle EOF conditions
I have a program where the user enters two inputs. Being that I can't control what the user enters, the user can go past the fixed size of the array. Since fgets() appends retains a newline to the end before the null character, in the event that a newline cannot fit when the user goes beyond the intended size, the null character truncates the input. Does the newline character when the user hits enter still exist in the input stream? If so, is this the reason why fgets()skips the second time because of the newline from the first input?
#include <stdio.h>
int main(){
char str[5];
fgets(str,5,stdin);
printf("Output:%s",str);
fgets(str,5,stdin);
printf("Output:%s",str);
return 0;
}
Example Input
ABCDE\n
Output
Output:ABCDOutput:E
After reading this SO answer fgets() isn't prompting user a second time
, the issue seems to be not flushing the input stream via fflush(stdin), but I've heard conflicting information saying as this leads to undefined behavior. My last question is, what would be the appropriate way to clear the input stream if it's the retained newline that's causing issues?
the user can go past the fixed size of the array. Since fgets() appends a newline to the end before the null character
No, it does not. It writes characters read from the input into the provided buffer, up to and including the first newline, or until the specified buffer size is exhausted (less one byte for the string terminator), or until an error occurs or the end of the stream is reached, whichever comes first. The newline is not invented by fgets(); it comes from the input.
, in the event that a newline cannot fit when the user goes beyond the intended size, the null character truncates the input. Does the newline character when the user hits enter still exist in the input stream?
All characters entered by the user and not copied into the buffer remain waiting to be read in the stream. That will include the newline, if the user entered one.
If so, is this the reason why fgets()skips the second time because of the newline from the first input?
fgets() does not skip, but it does pick up where the previous call left off transferring characters from input to the buffer. No characters are lost. That means that the second call returns part of the first input line if the first call did not return the whole thing. You need to account one way or another for the possibility that the input does not conform to your line-length expectations.
the issue seems to be not flushing the input stream via fflush(stdin),
No, it isn't. Flushing is for sending buffered output to the underlying output device. Flushing an input stream produces undefined behavior. In principle, that could manifest as a buffer dump, and a given implementation might even specify such behavior, but you don't want that because there may be more data buffered than you want to get rid of.
but I've heard conflicting information saying as this leads to undefined behavior. My last question is, what would be the appropriate way to clear the input stream if it's the retained newline that's causing issues?
You read from the input until you've read the newline. There are plenty of I/O functions to choose from to accomplish this. fgets() itself might prove convenient, since you're already using it:
char str[5];
if (fgets(str, 5, stdin)) {
printf("Output:%s", str);
// read and consume the tail of the line, if any (overwrites str)
while (!strchr(str, '\n') && fgets(str, 5, stdin)) { /* empty */ }
}
fgets() reads until
1) New-line
2) Buffer is full
3) End-of-file
4) Input error (rare)
This code reads and takes care of #3 & #4
#define N 5
char buf[N];
if (fgets(buf, sizeof buf, stdin) == NULL) {
// Handle EOF or Error
return EOF;
}
To distinguish if a '\n' is present ... (#2 from #1)
// look for a lack of \n
if (strchr(buf, '\n') == NULL) {
And if so, read until it is found or EOF.
int ch;
while ((ch = fgetc(stdin)) != '\n' && ch != EOF);
}
--
Do not use the following code. It can be exploited by reading a null character as the first character.
size_t len = strlen(buf);
if (buf[len - 1] != '\n') { // bad way to detect \n
Could use
if (len > 0 && buf[len - 1] != '\n') { // Good
Being that I can't control what the user enters...
No, you cannot.
the user can go past the fixed size of the array.
Right. This is always a concern. However, In general you'll want to arrange things so that this rarely happens.
For example, if you really want to limit the user to (say) a 4-character-long input string, let him type whatever he wants, then see how much he typed, and if it was more than your limit, print a nice error message or something. But I do not recommend calling fgets(str, 5, stdin) if you're expecting 4 characters of input plus a newline, because it's just way too hard to recover when (not if) the user types too much.
in the event that a newline cannot fit when the user goes beyond the intended size, the null character truncates the input. Does the newline character when the user hits enter still exist in the input stream?
Absolutely yes.
If so, is this the reason why fgets()skips the second time because of the newline from the first input?
Pretty much yes.
I recommend allocating a much bigger buffer, and then proceeding something like this:
char inpbuf[512);
if(fgets(inpbuf, sizeof(inpbuf), stdin) == NULL) {
fprintf(stderr, "end of file\n");
return;
}
char *p = strrchr(inpbuf, '\n');
if(p == NULL) {
fprintf(stderr, "looks like you typed *way* too much\n");
return;
}
*p = '\0'; /* erase the \n */
if(strlen(inpbuf) > 4) {
fprintf(stderr, "you typed too much (max 4)\n");
return;
}
strcpy(str, inpbuf);
printf("Output:%s", str);
One glitch with this code as written, though: if the user hits the end-of-file key (control-D on Unix/Linux) before hitting Return, you'll falsely get the "looks like you typed way too much" message.
If the string read by fgets doesn't end in a newline, you know it's still in the buffer. In that case, call getchar in a loop until you get a newline.
fgets(str,5,stdin);
printf("Output:%s",str);
if (strchr(str, '\n') == NULL) {
int c;
while ((c = getchar()) != EOF && c != '\n');
}
fgets(str,5,stdin);
printf("Output:%s",str);
I'm trying to read a line with scanf("%[^\n]"); right before it I'm reading an integer with "%d", was told to me that scanf doesn't erase the '\n' after reading, so I have to call fflush() to avoid it, but even doing that I still have the same problems, so here is my code:
scanf("%d", &n);
fflush(stdin);
lines = (char**)malloc(sizeof(char*)*n);
for(i = 0; i < n; i++){
lines[i] = (char*)malloc(sizeof(char)*1001);
}
for(i = 0;i < n;i++){
scanf("%[^\n]", linhes[i]);
}
I read an integer and then the scanf doesn't wait, it starts reading the input — doesn't matter what the integer value is, whether 5 or 10, the scanf reads all the strings to empty. Already tried with fgets and the result is almost the same, except that it reads some of the strings and skips others.
Let us look at this step by step:
"... read a line with scanf("%[^\n]");".
scanf("%[^\n]", buf) does not read a line. It almost does - sometimes. "%[^\n]" directs scanf() to read any number of non-'\n' char until one is encountered (that '\n' is then put back into stdin) or EOF occurs.
This approach has some problems:
If the first char is '\n', scanf() puts it back into stdin without changing buf in anyway! buf is left as is - perhaps uninitialized. scanf() then returns 0.
If at least one non-'\n' is read, it is saved into buf and more char until a '\n' occurs. A '\0' is appended to buf and the '\n' is put back into stdin and scanf() returns 1. This unlimited-ness can easily overfill buf. If no char was saved and EOF or input error occurs, scanf() returns EOF.
Always check the return value of scanf()/fgets(), etc. functions. If your code does not check it, the state of buf is unknown.
In any case, a '\n' is still usually left in stdin, thus the line was not fully read. This '\n' often is an issue for the next input function.
... scanf doesn't erase the '\n' after reading
Another common misconception. scanf() reads a '\n', or not, depending on the supplied format. Some formats consume '\n', others do not.
... call fflush() to avoid it
fflush(stdin) is well defined in some compilers but is not in the C standard. The usual problem is code wants to eliminate any remaining data in stdin. A common alternative, when the end of the line had not yet occurred, is to read and dispose until '\n' is found:
int ch; // Use int
while ((ch = fgetc(stdin)) != '\n' && ch != EOF);
I still have the same problems
The best solution, IMO, is to read a line of user input and then scan it.
char buf[sizeof lines[i]];
if (fgets(buf, sizeof buf, stdin) == NULL) return NoMoreInput();
// If desired, remove a _potential_ trailing \n
buf[strcspn(buf, "\n")] = 0;
strcpy(lines[i], buf);
I recommend that a buffer should be about 2x the size of expected input for typical code. Robust code, not this snippet, would detect if more of the line needs to be read. IMO, such excessively long lines are more often a sign of hackers and not legitimate use.
BLUEPIXY in the comment answered my question:
try "%[^\n]" change to " %[^\n]"
I am using the following method clear the input buffer:
void dump_line(FILE *fp) {
int ch;
while ( (ch = fgetc(fp)) != EOF && ch != '\n');
}
This works fine if I read from stdin using scanf():
char string[51];
...
scanf("%50[^\n]", string);
dump_line(stdin);
However, if I use fgets() instead, as in the following code:
char string[52];
...
fgets(string, 52, stdin);
dump_line(stdin);
// Since fgets() reads in the '\n', trim the end of the string:
string[strlen(string)-1] = 0;
Since fgets() reads in the '\n' character I found the need to allocate a buffer one char larger and trim the string back one character. This works fine but there is a problem with the dump_line function. When using the scanf() version, it works as expected since there will always be a '\n' left in the input buffer due to the use of [^\n]. So even if that is the only char left in the buffer, in dump_line() the fgetc() reads the char and since it is a '\n' the while loop is broken.
In the fgets() version, the '\n' is read in if it will fit in the string buffer, leaving stdin empty. This is causing the program to wait on the fgetc(), requiring the user to hit the enter key to progress any further, which is obviously not what I am after. On the other hand, if the user enters a string too long for the buffer, the dump_line() is working fine!
Im guessing the problem is something to do with EOF, but I cannot seem to get this to work as intended! Any help would greatly be appreciated.
If it is any help the platform I am working on is Mac OSX, just in case this is some kind of platform-specific quirk.
Check whether you need to clear the buffer,
fgets(string, 52, stdin);
size_t len = strlen(string);
if (string[len-1] == '\n') {
// read in whole line, no need to clear buffer
string[len-1] = 0;
} else {
// junk left in buffer, clear it
dump_line(stdin);
}
You could use ungetc to put the newline back into the stream.