I read articles about wp cli but none of them answered for me.
I enter the following code
plesk ext wp-toolkit --wp-cli -instance-id INSTANCE_ID -- edd v30_migration
but it gives an error:
[2022-07-20 08:05:53.463] 29536:62d7b76170d8f ERR [util_exec] proc_close() failed ['/usr/local/psa/admin/bin/filemng' 'site.com_zkado5xmjjm' 'exec' '/var/www/vhosts/site.com/httpdocs' 'timeout' '60' '/opt/plesk/php/8.0/bin/php' '-d' 'safe_mode=off' '-d' 'display_errors=on' '-d' 'opcache.enable_cli=off' '-d' 'open_basedir=' '-d' 'error_reporting=341' '-d' 'max_execution_time=60' '-c' '/var/www/vhosts/system/site.com/etc/php.ini' '/usr/local/psa/admin/plib/modules/wp-toolkit/vendor/wp-cli/wpt-wp-cli.php' '--path=/var/www/vhosts/site.com/httpdocs' '--no-color' 'edd' 'v30_migration'] with exit code [1]
Error: 'edd' is not a registered wp command. See 'wp help' for available commands.
Did you mean 'db'?
Related
I'm trying to setup Pktgen according to the Getting started with Pktgen guide in my VirtualBox which is running Ubuntu 22.04.1, Pktgen 22.04.01 and DPDK 22.11.1. But when I try to run pktgen I get an error message for "Illegal instruction".
When I run sudo ./tools/run.py -s I get the following sdk and target;
Here is my default.cfg
description = 'A Pktgen default simple configuration'
# Setup configuration
setup = {
'exec': (
'sudo', '-E'
),
'devices': (
'00:08.0'
),
# UIO module type, igb_uio, vfio-pci or uio_pci_generic
'uio': 'uio_pci_generic'
}
# Run command and options
run = {
'exec': ('sudo', '-E'),
# Application name and use app_path to help locate the app
'app_name': 'pktgen',
# using (sdk) or (target) for specific variables
# add (app_name) of the application
# Each path is tested for the application
'app_path': (
'/home/myname/Documents/Pktgen-DPDK/build/app/pktgen',
),
'cores': '3-4,5',
'nrank': '4',
'proc': 'auto',
'log': '7',
'prefix': 'pg',
'blocklist': (
#'03:00.0', '05:00.0',
#'81:00.0', '84:00.0'
),
'allowlist': (
'00:08.0',
),
'opts': (
'-v',
'-T',
'-P',
),
'map': (
'[3:4].0',
),
'theme': 'themes/black-yellow.theme',
#'shared': '/usr/local/lib/x86_64-linux-gnu/dpdk/pmds-21.1'
}
Which runs this command:
sudo -E /home/myname/Documents/Pktgen-DPDK/build/app/pktgen -l 3-4,5 -n 4 --proc-type auto --log-level 7 --file-prefix pg -a 00:08.0 -- -v -T -P -m [3:4].0 -f themes/black-yellow.theme
This is the result:
Copyright(c) <2010-2021>, Intel Corporation. All rights reserved. Powered by DPDK
Illegal instruction
Update
After running ninja -C build install, "app/pktgen" was installed to "/usr/local/bin" and after running:
/usr/local/bin/pktgen -l 1,2,3 -n 4 -a 0000:00:08.0 -m 1024 -- -T -m [1:2].0
I still get "Illegal instruction" but now it also includes the message "(core dump")
Copyright(c) <2010-2021>, Intel Corporation. All rights reserved. Powered by DPDK
Illegal instruction (core dumped)
I have also set enable-avx2 in meson_options.txt to false.
Why is this happening and how do I fix it?
gem install mysql2 -v '0.3.21' --source 'https://rubygems.org/'
Building native extensions. This could take a while...
ERROR: Error installing mysql2:
ERROR: Failed to build gem native extension.
current directory: /home/tatarski/.rvm/gems/ruby-2.3.8/gems/mysql2-0.3.21/ext/mysql2
/usr/share/rvm/rubies/ruby-2.3.8/bin/ruby -I /usr/share/rvm/rubies/ruby-2.3.8/lib/ruby/site_ruby/2.3.0 -r ./siteconf20210223-17291-11rjqor.rb extconf.rb
checking for ruby/thread.h... yes
checking for rb_thread_call_without_gvl() in ruby/thread.h... yes
checking for rb_thread_blocking_region()... no
checking for rb_wait_for_single_fd()... yes
checking for rb_hash_dup()... yes
checking for rb_intern3()... yes
-----
Using mysql_config at /usr/bin/mysql_config
-----
checking for mysql.h... yes
checking for errmsg.h... yes
checking for mysqld_error.h... yes
-----
Setting libpath to /usr/lib/x86_64-linux-gnu
-----
creating Makefile
current directory: /home/tatarski/.rvm/gems/ruby-2.3.8/gems/mysql2-0.3.21/ext/mysql2
make "DESTDIR=" clean
current directory: /home/tatarski/.rvm/gems/ruby-2.3.8/gems/mysql2-0.3.21/ext/mysql2
make "DESTDIR="
compiling client.c
client.c: In function 'nogvl_read_query_result':
client.c:439:3: error: unknown type name 'my_bool'
my_bool res = mysql_read_query_result(client);
^
client.c: In function '_mysql_client_options':
client.c:762:3: error: unknown type name 'my_bool'
my_bool boolval;
^
client.c:797:10: error: 'MYSQL_SECURE_AUTH' undeclared (first use in this function)
case MYSQL_SECURE_AUTH:
^
client.c:797:10: note: each undeclared identifier is reported only once for each function it appears in
client.c: In function 'set_secure_auth':
client.c:1185:38: error: 'MYSQL_SECURE_AUTH' undeclared (first use in this function)
return _mysql_client_options(self, MYSQL_SECURE_AUTH, value);
^
client.c:1186:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
make: *** [Makefile:239: client.o] Error 1
make failed, exit code 2
This is the whole error I get.
Does anyone know how to fix this.
The previous threads are old/ the solutions for them didn't work.
I tried:
sudo apt-get install ruby-mysql
and got:
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package ruby-mysql
https://github.com/brianmario/mysql2
as mentioned here you need to install a few Linx packages first before installing the gem
I've been compiling OpenSSL (and thus Perl >5.10, as it is a dependency) on multiple platforms. I've managed to get 1.1.0b compiled on every single platform except AIX, which I can't even compile Perl. I've tried several versions and looked at the documentation Perl provides online. From what I can tell, it suggests version 5.12.2.
When I attempt to compile version 5.12.2,
I take the following from the documentation, and fill in a few local system variables, such as using XLC rv7.
export OBJECT_MODE=64
./Configure \
-d \
-Dcc=/usr/vac/bin/xlc_r7 \
-Duseshrplib \
-Duse64bitall \
-Dprefix=`pwd`/../PERL
Then I attempt to make as prompted, and get the following error:
/usr/vac/bin/xlc_r7 -q64 -o miniperl -brtl -bdynamic -L/usr/local/lib -b64 gv.o toke.o perly.o pad.o regcomp.o dump.o util.o mg.o reentr.o mro.o hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o perlio.o perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o miniperlmain.o opmini.o perlmini.o -lbind -lnsl -ldl -lld -lm -lcrypt -lc
LIBPATH=.../perl-5.12.2 ./miniperl -w -Ilib -MExporter -e '<?>' || make minitest
LIBPATH=.../perl-5.12.2 ./miniperl -Ilib autodoc.pl
/usr/bin/ln -s perl5122delta.pod pod/perldelta.pod
LIBPATH=.../perl-5.12.2 ./miniperl -Ilib -Icpan/Cwd -Icpan/Cwd/lib pod/perlmodlib.PL -q
readdir(./../../../../..): Bad file number at lib/FindBin.pm line 116
stat(/pod/): No such file or directory at lib/FindBin.pm line 197
stat(/pod/): No such file or directory at lib/FindBin.pm line 200
Use of chdir('') or chdir(undef) as chdir() is deprecated at pod/perlmodlib.PL line 9.
No such file or directory at pod/perlmodlib.PL line 19.
make: The error code from the last command is 2.
Taking a look at pod/perlmodlib.PL, we see the following:
# MANIFEST itself is Unix style filenames, so we have to assume that Unix style
# filenames will work.
open (MANIFEST, "../MANIFEST") or die $!;
In my desperation I tried to hack it up and avoid writing to the manifest, but then I get this issue:
Creating Makefile.PL in cpan/Archive-Extract for Archive::Extract
Running Makefile.PL in cpan/Archive-Extract
../../miniperl Makefile.PL INSTALLDIRS=perl INSTALLMAN1DIR=none INSTALLMAN3DIR=none PERL_CORE=1 LIBPERL_A=libperl.a
readdir(./../../../../../../..): No such file or directory at ../../lib/File/Find.pm line 610
Use of chdir('') or chdir(undef) as chdir() is deprecated at ../../lib/File/Find.pm line 773.
readdir(./../../..): No such file or directory at ../../cpan/Cwd/lib/File/Spec/Unix.pm line 483
Could not open 'lib/Archive/Extract.pm': No such file or directory at ../../cpan/ExtUtils-MakeMaker/lib/ExtUtils/MM_Unix.pm line 2588.
512 from cpan/Archive-Extract's Makefile.PL at make_ext.pl line 390.
Warning: No Makefile!
make: Cannot find a rule to create target config from dependencies.
Stop.
make config PERL_CORE=1 LIBPERL_A=libperl.a failed, continuing anyway...
Making all in cpan/Archive-Extract
make all PERL_CORE=1 LIBPERL_A=libperl.a
make: Cannot find a rule to create target all from dependencies.
Stop.
Unsuccessful make(cpan/Archive-Extract): code=512 at make_ext.pl line 449.
make: The error code from the last command is 2.
The frequency of errors makes me feel like perhaps I don't have something configured right...
My next thought was to try the most updated version, which at the time of writing is 5.24. Using the same configuration and attempting to make I get the following issue:
Can't locate strict.pm in #INC (you may need to install the strict module) (#INC contains: /cpan/AutoLoader/lib /dist/Carp/lib /dist/PathTools /dist/PathTools/lib /cpan/ExtUtils-Install/lib /cpan/ExtUtils-MakeMaker/lib /cpan/ExtUtils-Manifest/lib /cpan/File-Path/lib /ext/re /dist/Term-ReadLine/lib /dist/Exporter/lib /ext/File-Find/lib /cpan/Text-Tabs/lib /dist/constant/lib /cpan/version/lib /lib .) at autodoc.pl line 25.
BEGIN failed--compilation aborted at autodoc.pl line 25.
make: The error code from the last command is 2.
Which I know from other compilations means I need to edit the PERL5LIB variable.
If I keep adding all the modules to the path:
export PERL5LIB=`pwd`/dist/Exporter/lib:$PERL5LIB
export PERL5LIB=`pwd`/cpan/Text-Tabs/lib:$PERL5LIB
export PERL5LIB=`pwd`/ext/re:$PERL5LIB
export PERL5LIB=`pwd`/dist/constant/lib:$PERL5LIB
export PERL5LIB=`pwd`/cpan/ExtUtils-MakeMaker/lib:$PERL5LIB
export PERL5LIB=`pwd`/dist/Carp/lib:$PERL5LIB
export PERL5LIB=`pwd`/cpan/File-Path/lib:$PERL5LIB
export PERL5LIB=`pwd`/dist/PathTools:$PERL5LIB
export PERL5LIB=`pwd`/dist/PathTools/lib:$PERL5LIB
export PERL5LIB=`pwd`/ext/File-Find/lib:$PERL5LIB
Even so, I'll still get an error for a module that isn't even present in the 5.24.0 source!
Can't locate ExtUtils/MakeMaker/version/vpp.pm in #INC (you may need to install the ExtUtils::MakeMaker::version::vpp module) (#INC contains: <removed from post>) at (eval 2) line 2.
BEGIN failed--compilation aborted at (eval 2) line 2.
Compilation failed in require at .../perl-5.24.0/cpan/ExtUtils-MakeMaker/lib/ExtUtils/MakeMaker.pm line 10.
BEGIN failed--compilation aborted at .../perl-5.24.0/cpan/ExtUtils-MakeMaker/lib/ExtUtils/MakeMaker.pm line 10.
Compilation failed in require at Makefile.PL line 7.
BEGIN failed--compilation aborted at Makefile.PL line 7.
Unsuccessful Makefile.PL(cpan/Archive-Tar): code=512 at make_ext.pl line 517.
make: The error code from the last command is 2.
I have MakeMaker, but the 5.24 version does not contain vpp.pm! Again, in desperation I attempted to put it in there from a different source, and I get this error:
LIBPATH=.../perl-5.24.0 ./miniperl -Ilib make_ext.pl cpan/Archive-Tar/pm_to_blib MAKE="make" LIBPERL_A=libperl.a
readdir(./../../../../../../..): No such file or directory at .../perl-5.24.0/ext/File-Find/lib/File/Find.pm line 142.
Can't cd to : No such file or directory
Unsuccessful Makefile.PL(cpan/Archive-Tar): code=512 at make_ext.pl line 517.
make: The error code from the last command is 2.
All of this makes me feel like perhaps I'm not configuring something right... Can anyone with some experience help me out with some cut and dry installation instructions for Perl on AIX? I'd be super grateful. Thanks!
Below is some information about my system:
> prtconf
System Model: IBM,8231-E1D
Machine Serial Number: Not Available
Processor Type: Not Available
Processor Implementation Mode: POWER 7
Processor Version: PV_7_Compat
Number Of Processors: 0
Processor Clock Speed: Not Available
CPU Type: 64-bit
Kernel Type: 64-bit
Memory Size: 10240 MB
Good Memory Size: Not Available
Platform Firmware level: Not Available
Firmware Version: IBM,AL770_092
Console Login: disable
Auto Restart: true
Full Core: false
I pull down and compile openssh and openssl frequently. I use gcc and no real magic that I can recall.
Here is my script to build it. I don't know which perl is native to AIX but it seems to work for me.
https://github.com/pedz/aix-build-scripts/blob/master/build-scripts/build-openssl
Can anyone share a complete list of steps to be performed in order to cross compile CEF3 for ARM?
I am working on host = ubuntu 14.04 and I would like to cross compile for odroid board.
This is the list of steps I performed:
>git clone https://chromium.googlesource.com/chromium/tools/depot_tools.git
>export PATH=`pwd`/depot_tools:"$PATH"
>mkdir CEF3_odroid
>cd CEF3_odroid
>mkdir chromium
>cd chromium
>fetch --nohooks chromium --nosvn=True
>#I found the following revision reading CHROMIUM_BUILD_COMPATIBILITY.txt from https://bitbucket.org/chromiumembedded/cef/src
>gclient sync --revision 14bd12d63019fbdd6f9d6c16b986a5f64a21264b --jobs 16
>cd src
>git clone https://bitbucket.org/chromiumembedded/cef.git
>sudo apt-get install gcc-arm-linux-gnueabihf
>sudo apt-get install g++-4.8-multilib-arm-linux-gnueabihf
>./build/install-build-deps.sh --arm
>cd cef
>export GYP_GENERATORS='ninja'
>export GYP_CROSSCOMPILE=1
>export GYP_DEFINES='target_arch=arm arm_float_abi=hard component=shared_library linux_use_gold_flags=1'
>./cef_create_projects.sh
And I got the following error: gyp: Call to 'python cups_config_helper.py --libs /media/varesio/disco2/GEF/CEF3_odroid/chromium/src/chrome/installer/linux/debian_wheezy_arm-sysroot' returned exit status 1. Traceback (most recent call last): File "tools/gclient_hook.py", line 106, in RunAction(cef_dir, gyper) File "/media/varesio/disco2/GEF/CEF3_odroid/chromium/src/cef/tools/gclient_util.py", line 39, in RunAction command, cwd=dir, always=True) File "/media/varesio/disco2/GEF/CEF3_Linux/depot_tools/gclient_utils.py", line 293, in CheckCallAndFilterAndHeader return CheckCallAndFilter(args, **kwargs) File "/media/varesio/disco2/GEF/CEF3_Linux/depot_tools/gclient_utils.py", line 538, in CheckCallAndFilter rv, args, kwargs.get('cwd', None), None, None) subprocess2.CalledProcessError: Command '/usr/bin/python ../build/gyp_chromium cef.gyp -I cef.gypi' returned non-zero exit status 1 in /media/varesio/disco2/GEF/CEF3_odroid/chromium/src/cef
Thanks Andrea
I've had same problem. Resolved by adding use_cups=0 to GYP_DEFINES env.
I want to use a webservice in C code. I am trying to make a client. I need something to do what Axis2java does and generates the classes from a wsdl files.
I found that Axis2c makes (.c) files generated from wsdl file.
I downloaded it from here . unzipped it. I created the environment variable for AXIS2C_HOME and I created AXIS2C_CLASSPATH.
but I can't make it work.
when I type this command :
WSDL2C -uri -ss -sd -d none -u -f -o
I get this error :
echo off
Error: Could not find or load main class org.apache.axis2.wsdl.WSDL2C
how can I solve this problem. and please tell me how to use this Axis2c tool properly.
Thank you in advance.
#loentar : I installed Axis2/Java and I set the environment variable for it. now I run the wsdl2c.bat I get this :
E:\dev\Tools\axis2c-bin-1.6.0-win32\bin\tools\wsdl2c>WSDL2C.bat
E:\dev\Tools\axis2c-bin-1.6.0-win32\bin\tools\wsdl2c>echo off
Usage: java [-options] class [args...]
(to execute a class)
or java [-options] -jar jarfile [args...]
(to execute a jar file)
where options include:
-d32 use a 32-bit data model if available
-d64 use a 64-bit data model if available
-server to select the "server" VM
The default VM is server.
-cp
-classpath
A ; separated list of directories, JAR archives,
and ZIP archives to search for class files.
-D=
set a system property
-verbose:[class|gc|jni]
enable verbose output
-version print product version and exit
-version:
require the specified version to run
-showversion print product version and continue
-jre-restrict-search | -no-jre-restrict-search
include/exclude user private JREs in the version search
-? -help print this help message
-X print help on non-standard options
-ea[:...|:]
-enableassertions[:...|:]
enable assertions with specified granularity
-da[:...|:]
-disableassertions[:...|:]
disable assertions with specified granularity
-esa | -enablesystemassertions
enable system assertions
-dsa | -disablesystemassertions
disable system assertions
-agentlib:[=]
load native agent library , e.g. -agentlib:hprof
see also, -agentlib:jdwp=help and -agentlib:hprof=help
-agentpath:[=]
load native agent library by full pathname
-javaagent:[=]
load Java programming language agent, see java.lang.instrument
-splash:
show splash screen with specified image
See http://www.oracle.com/technetwork/java/javase/documentation/index.html for m
ore details.
after that I run this command :
E:\dev\Tools\axis2c-bin-1.6.0-win32\bin\tools\wsdl2c>WSDL2C.bat -uri hello.wsdl
-u -uw
E:\dev\Tools\axis2c-bin-1.6.0-win32\bin\tools\wsdl2c>echo off
Unrecognized option: -uri
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
what can I do ?
I'm using windows 8 by the way.
In addition to Axis2/C you must have Axis2/Java installed.
AXIS2_HOME must point to Axis2/Java installation.
For details please see README of codegen.
The complete list of commands to create and compile client is:
# create stubs
sh $AXIS2C_HOME/bin/tools/wsdl2c/WSDL2C.sh -uri Calculator.wsdl -u -uw
# implement main() in src/your_client.c
# see samples/codegen/client/calculator for example
# compile and link client
gcc -o calculator_client src/*.c -I$AXIS2C_HOME/include/axis2-1.6.0 -L$AXIS2C_HOME/lib -laxutil -laxis2_axiom -laxis2_parser -laxis2_engine -lpthread -laxis2_http_sender -laxis2_http_receiver -ldl -Wl,--rpath -Wl,$AXIS2C_HOME/lib
I set the envinroment variable for JAVA_HOME, AXIS2_HOME, AXIS2C_HOME, and added their lib folder to CLASSPATH. after running this command:
WSDL2C.bat -uri hello.wsdl -u -uw
I got this message:
echo off
Error: Could not find or load main class org.apache.axis2.wsdl.WSDL2C
I found the solution myself. :)
I double checked if I had created the environment variable for AXIS2_HOME and I saw that it is there, correctly.
in spite of it's existence I tried to set it again in command prompt. so I typed:
SET AXIS2_HOME=E:\dev\Tools\axis2-1.6.2
then I typed the command for WSDL2C code generator:
WSDL2C.bat -uri hello.wsdl -u -uw
And BAM ! it worked properly.
Now I can generate C files from WSDL file.