So I was able to publish my wpf application using click once without any problem for a couple of months. But yesterday when I tried I got an odd looking message.
When choosing Yes option the publish stops and fills error list with those errors:
I tried searching online but without any success.
I resolved this issue by unchecking the passive mode check box when prompted for the ftp credentials
This issue started happening to me after I upgraded to Visual Studio 2019 16.7.3. I also updated my application from .NET Framework 4.7.2 to 4.8. (Although I doubt that's the issue, I did not revert to 4.7.2 to test it.)
My solution was to publish to a local folder and then upload those files with a separate FTP application (e.g., FileZilla). Upgrading my existing ClickOnce app worked fine.
Details: In your application's Properties page, select the Publish tab. Change the Publishing Folder Location field from "ftp://whatever" to "C:\publish-MyApp." Click the Publish Now button. VS will create the files pretty quickly. Next, use your FTP application to upload the contents of the C:\publish-MyApp folder to the existing installation folder on your server. This overwrites the existing setup.exe and MyApp.application files and adds a new folder (e.g., MyApp_1.2.3.4) in the Application Files folder.
(One side benefit of this method is that it's faster to publish because FileZilla is a lot faster at uploading than Visual Studio.)
I am looking for a step by step guidance to deploy a c++ winforms application into Azure DevOps.
I have a legacy application and its already into TFS server but now the team has planned to put it into Azure DevOps and automate the builds and release process.
I did some researches and tried something and it partly worked out. But, I cannot understand whether to go by GIT or TFVC (Team Foundation Version Control)?
As, the application is already into TFS, I believe it will be easier to create the repository and pipeline using TFVC. But, what if I want to do using GIT? What are the factors I should consider when using GIT?
NOTE: I do not have TFS server access but I do have Azure DevOps access.
What I have tried:
Created a demo project. Below are the details about the demo project:
<code>Project and Solution Name -> SampleApp
Solution file location -> "C:\SampleProj\SampleApp\SampleApp.sln"
Other project files location -> "C:\SampleProj\SampleApp\SampleApp"</code>
Tried to deploy the above sample project into Azure, using GIT. The steps I followed are given below:
<code>
1. Installed GIT.
2. Logged into dev.azure.com with my credentials.
3. Created a new project and copied the 1st link as provided in "Repos" section.
4. Created a ".gitignore" file from Visual Studio Team Explorer -> Settings -> Repository Settings.
5. Went to the project folder (C:\SampleProj\SampleApp\SampleApp\) and right-clicked and selected "GIT Bash Here". The GIT command prompt opened up and typed the following commands:
a. git init
b. git remote add origin [URL copied at step 3]
c. git add .
d. git commit
e. git push -u origin master
</code>
After these steps, the repos in Azure were holding all the files except the solution file (.sln) and when I created pipeline for builds, the builds started to failed as it was not getting the .sln file.
I cannot understand the below mentioned points:
<code>
1. For all projects, I cannot find Repository Settings in Team Explorer. Why so?
2. If I have a legacy application already in TFS, can't I make it done using TFVC instead of using GIT?
3. What are the correct steps being followed in the industry?
</code>
I did some researches and tried something and it partly worked out.
But, I cannot understand whether to go by GIT or TFVC (Team Foundation
Version Control)?
Git is distributed system while TFVC is centralized system. More into about their difference you can refer to this document.
But, what if I want to do using GIT?
About moving from TFVC to Git you can consider using git-tfs tool. More details check this guide.
Tried to deploy the above sample project into Azure, using GIT. The
steps I followed are given below:
If you have a newly created project, you can easily add it into git source control in Visual Studio and then push it to Azure Devops Service project. Please check Share your code with Visual Studio 2017 and Azure Repos Git.
For all projects, I cannot find Repository Settings in Team Explorer.
Why so?
You need to add the solution into source control in VS first, then you can find repository Settings in Team Explorer=>Settings=>Repository Settings.
Hope all above helps and it could be better to separate the different questions in your post into different threads.
I would like to be able to publish from visual studio. I am able to do this
I have different configurations for Debug,QA,Release. I am using config transforms and they work fine.
ISSUE: when I publish the I want the Debug, QA,Release to be published to their respective folder example E:\Application\Debug and so on. I am able to do this by changing the Publishing folder location and Installation folder location manually. How can this be such: f I change the configuration these locations are selected automatically. So when I need to publish a particular version -> and all I need to do is
change the config
press the publish now button.
Thanks!
The only possibility I know of would be to use a Build Server and build if the Source code changes (probably seperate branches) and have build definitions for each case.
This would mean that you would have to have a kind of source control (Git, Mercurial, TFS) for the Project and the resources to run that kind of service or use a Service on the internet.
Build Server for local installation:
TeamCity
Team Foundation Server
Build Server via Internet:
VisualStudio.com
(Those are the onse that come to my mind because I have used them before. There are much more available)
Is it possible to customize the DNN 8 modules and Skins? Is it possible to config the DNN 8 and use it in VS 2010 framework 4.0? If is it let me know the steps to do, because I have configured DNN 8 site to the IIS 7 and it works good from the there, but when I am trying to load this to the VS2010 and Build it, it gives me different errors.
Errors:
i) Unknown server tag 'dnn:DnnCssIncludes' - Which was resolved by adding one line for dnn tag in the same file.
ii) After resolving previous error the another error wsa of ckFinder, and it was resolved by adding ckFinder.dll file in bin folder.
iii) After resolving previous issues it generates new error for ckEditor. It shows me the following error message:
The type or namespace name 'Ventrian' could not be found (are you missing a using directive or an assembly reference?)
I have tried to resolve and search for the solution but fail to do. Will any one let me know the fixes for this?
Yes, this is possible, you will want to do a couple of things
Setup your Environment
Open the Project for whatever you are modifying, this typically involves install the SOURCE package of the extension you want to modify.
Don't change "core", meaning don't change "DNN" itself, you can, it's open source, but once you do you are forked and upgrading to new releases of DNN is very difficult to do if you aren't careful.
Setting up your environment
From http://www.christoc.com/Tutorials/All-Tutorials/aid/1
Setting up your development environment can vary based on what your end goal is. If you are doing module development for your own use, and within your own DNN environments, you can ignore a few of the settings below. If you are doing module development with the idea that you might turn around and give the modules away, or sell them, then you will likely want to follow the guidelines set forth below to support the widest array of DNN installation environments.
I recommend that each developer have their own local development environment, with a local IIS website running DotNetNuke, and a SQL Server 2008/2012 (not express, though you can use it) database for the website. Having an individual development environment makes group module development far easier than if you share environments/databases.
Choosing a DotNetNuke Version
Choosing a version of DotNetNuke is important when you start your development for couple of reasons. For modules that you are developing for yourself, you need to ask, what is the minimum version of DotNetNuke that you have in production. Are you running DNN 5.6.1? Are you running 6.2.6, 7.0.0, 7.0.6? Based on the answer you can determine what version of DNN you should setup as your development environment. You shouldn't be developing on a newer version of DNN than what you have running in production. As with everything there are ways around this, but I am not going to go into the details on that in this tutorial.
As a developer working to create modules and release those, you might have production sites that are running on the latest and greatest version of DNN, but what about your customers? Or your potential customers? You have to ask yourself, do you want to provide support for really old versions of DotNetNuke? From a development perspective you will probably say no, but from a business perspective, you might say yes, and here’s why. Not everyone upgrades DotNetNuke websites as they should, and often times you will find that some people never upgrade. While I don’t advise taking that approach to managing a DotNetNuke website, it is a fact of life that people don’t always upgrade and there are thousands of people, if not tens of thousands, that have sites that aren’t running on the latest version of DNN. You should take that into account when you are doing your module development, if you compile your module against an older version of DNN then your module should run on newer versions of as well, for example. If you compile your module against DotNetNuke 6.2.6 it will likely run on every version of DNN released since then. Though there are extended cases where this won’t always work, DNN strives to maintain backwards compatibility, this isn't always possible.
You might also want to use features that are only available starting with a specific version of DotNetNuke, such as the workflow functionality found starting in DNN 5.1, in that case you may choose not to support older versions of the platform out of necessity. This will minimize the market in which you can sell your modules, but also can make for less support and an easier development cycle due to the features that DNN provides.
Choosing a Package
Now here’s one that may baffle you a bit. I’m going to recommend that you use the INSTALL package for whatever version of DotNetNuke that you download. What? The INSTALL package? What about the SOURCE package? Well you can use the source, but you don’t need it. The module development that I’m setting you up for doesn't require the DNN source, and using the INSTALL package makes your development environment cleaner. We aren't going to be opening the DotNetNuke project when we do our module development, so why have the files sitting around for nothing? Also, if you've ever tried to use the SOURCE package for anything, you'll know it isn't easy.
The steps for setting up your development environment will apply to both the Community and Professional editions of DotNetNuke.
Installation Configuration
Once you have the version selection out of the way you can go through the installation process. While I’m not going to walk you through the minutest of details of each step of installing DotNetNuke in this post, I will at least try to point you in the right direction for each step.
Download the INSTALL package of the version of DotNetNuke you want to use in your development environment.
Extract the files in the INSTALL package to a location of your choosing, this location is where you will point IIS (the web server) when we can configure the website. In my environment I typically use c:\websites\dnndev.me\ (One item of note: you may need to right click on the ZIP file and choose Properties before extracting, on the properties window if you have an UNBLOCK option, click that. Some versions of Windows have started blocking files within the DotNetNuke ZIP files, which will cause you problems later during the actual install.)
Setup IIS
IIS is the web server that comes with Windows computers. DNN 7 requires IIS 7 or later (7,7.5,8.0), so you will need at least Windows Vista, Windows 7, Windows 8, or Windows Server 2008 R2, Windows Server 2012.
In IIS you should create a new website (Note: If you use an existing website in IIS be sure to add the HOST binding for DNNDEV.ME), and point to the folder where you extracted the INSTALL package.
Note: With DotNetNuke 7.0+, .NET Framework 4.0 is required, so be sure that your application pool is configured to run under 4.0, and not 2.0.
Set File Permissions
Setting up the file permissions for your DNN install is often the step that causes the most trouble. You should right click on the FOLDER in which you extracted DNN (c:\websites\dnndev.me) and choose properties. Choose the Security tab. You need to add permissions for the account in which your website's application pool is running under. You will want to setup the permissions to give the account Full or Modify permissions for the DNNDEV.ME folder. Which account you will use will vary based on your version of IIS, here’s a simple list of some of the default accounts based on the version of IIS.
IIS Version Operating System Account
IIS 7 Windows Vista, Windows Server 2008 localmachine\Network Service
IIS 7.5 Windows 2008 R2, Windows 7 IIS AppPool\APPPOOLNAME
IIS 8 Windows 2012, Windows 8 IIS AppPool\APPPOOLNAME
Note: If you are using IIS7.5/8.0 you’ll notice in the above table that we have APPPOOLNAME in the identity, this is because when you setup a new website in IIS a new application pool is created. In place of you should type in the name of the application pool that was created. You can also bypass this and configure your application pool to use the Network Service account instead of a dynamic account if you would like.
Database Configuration
In SQL Server you should go through and create a new database. I always create a database with the same name as the website, so in this case DNNDEV.ME. Once you have created the database, create a user that can access that database. I always use SQL authentication, turn off the enforce password requirements, and give the user DB Owner and Public access to the DNNDEV.ME database. Remember the username and password you create here as you will need them when you walk through the Installation screen for DotNetNuke.
DotNetNuke Installation Screen
Populate the installation screen with the standard DNN information, Host username, password, etc. For the Database option, choose Custom and configure your database connection, providing the Server IP/Name, the Database name (dnndev.me). For the database authentication you'll want to choose the option that allows you to enter the username/password for the database user that you created previously.
Now there are two additional options you can configure, normally I would tell you not to modify these, but from a development environment perspective I do recommend that you change the objectQualifier setting. It should be blank by default, you should type in “dnn” (without quotes), this will prepend “dnn_” to all of the objects that get created by DNN such as Tables and Stored Procedures. This is not something I recommend from a production stand point, but if you are developing modules for sale, then supporting objectQualifier in your development is recommended. It will save you time down the road if you have a customer who has an objectQualifier defined on their production databases.
DotNetNuke Module Development
To get started with your DNN module development, be sure to read our tutorial on how to install our Module Development Templates.
Next, setup Visual Studio Templates (you'll want to use VS 2015) and create a project.
You can find the templates here https://visualstudiogallery.msdn.microsoft.com/bdd506ef-d5c3-4274-bf1d-9e673fb23484
Download that, run the VSIX package installer, or search through the online templates for DotNetNuke. Watch this video https://www.youtube.com/watch?v=kOoQJDeTlJ0&list=PLFpEtny5sIbb9jGxJ7RBM5hIizodOCtoj&index=1
I have an issue installing two ClickOnce Windows applications on the same server. I have published one successfully. I have a requirement to install this same application on a different website in IIS. This is a copy of the existing application with slightly different functionality (not important). After I publish and try to install it, I get the following error:
Unable to install this application because an application with the
same identity is already installed. To install this application,
either modify the manifest version for this application or uninstall
the preexisting application.
I've tried changing the assemblyIdentity version number and name in the Properties -> app.Manifest, tried changing the Assembly name in the Project properties, tried clearing the manifest cache and none of these worked. I realize that this is the same application that I'm trying to install on two different websites on the same server, but what needs to be changed so that it will install correctly?
You need to change the Product Name of your application's deployment. This is the application name stored in the deployment manifest file. Making this name different between your 2 instances will allow you to install both of them at once. If setting this through Visual Studio, this is under the Options button on the Publish tab of your project's properties window.