log4c segmentation fault when calling rollingfile_udata_set_logdir - c
This is my code:
const char *logdir = ".";
const char *rollingpolicy_name = "rpolicy";
rollingfile_udata_t *rfup = NULL;
log4c_appender_t* app = NULL;
app = log4c_appender_get("rfileappender");
log4c_rollingpolicy_t *rollingpolicyp = NULL;
rfup = rollingfile_make_udata();
rollingfile_udata_set_logdir(rfup, logdir);
and this is the log4c4c file:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE log4c SYSTEM "">
<log4c version="1.2.4">
<config>
<bufsize>0</bufsize>
<debug level="2"/>
<nocleanup>0</nocleanup>
<reread>1</reread>
</config>
<category name="root" priority="notice"/>
<category name="log4c.collector" priority="debug" appender="rfileappender"/>
<category name="six13log.log" priority="error" appender="stdout" />
<rollingpolicy name="rpolicy" type="sizewin" maxsize="1024" maxnum="10" />
<appender name="rfileappender" type="rollingfile" logdir="/var/log/" prefix="myprefixd" layout="dated" rollingpolicy="rpolicy" />
<appender name="stdout" type="stream" layout="basic"/>
<appender name="stderr" type="stream" layout="dated"/>
<layout name="basic" type="basic"/>
<layout name="dated" type="dated"/>
</log4c>
I get segmentation fault when calling rollingfile_udata_set_logdir(rfup, logdir);
adding:
#include <log4c/category.h>
#include <log4c/appender.h>
#include <log4c/layout.h>
#include <log4c/appender_type_rollingfile.h>
#include <log4c/rollingpolicy.h>
#include <log4c/rollingpolicy_type_sizewin.h>
solved it.
Related
XmlHttpRequest post request doesn't work React Native Android App
In my application, there is a form that users fill and post soap action. This is a must soap because it's a ministry of healt procedure. XmlHttpRequuest post works fine in iOS devices. But doesn't work on android. I did a lot of research but didn't find anything. I am leaving the codes below.Please help me! Thanks!
const soapAction = async (xml, username, password,) => {//here is the post request func
var xmlhttp = new XMLHttpRequest();
xmlhttp.open(
'POST',
'https://*****************************',
);
xmlhttp.timeout = 10000;
var text=xml.toString('utf16');
var sr=
'<?xml version="1.0" encoding="UTF-8"?>'+
'<soap:Envelope' +
' xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"' +
' xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"' +
' xmlns:xsd="http://www.w3.org/2001/XMLSchema"' +
' xmlns:xs="http://www.w3.org/2001/XMLSchema"' +
' xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing"' +
' xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"' +
' xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">'+
'<soap:Header>'+
'<wsse:Security>'+
'<wsse:UsernameToken wsu:Id="SecurityToken-04ce24bd-9c7c-4ca9-9764-92c53b0662c5">'+
`<wsse:Username>${username}</wsse:Username>`+
`<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">${password}</wsse:Password>`+
'</wsse:UsernameToken>'+
'</wsse:Security>'+
'</soap:Header>'+
'<soap:Body>'+
'<***************************************************">'+
'<input>'+
'<![CDATA[' +
'<?xml version="1.0" encoding="utf-16"?>' +
`${text}`+
']]>'+
'</input>'+
'</**************>'+
'</soap:Body>'+
'</soap:Envelope>';
xmlhttp.setRequestHeader(
'SOAPAction',
'https://*****************************************',
);
xmlhttp.setRequestHeader('Content-Type', 'text/xml; charset=utf-16');
xmlhttp.setRequestHeader("Access-Control-Allow-Origin", "8");
xmlhttp.onload = async function () {
console.log(xmlhttp.responseText);
//alert(xmlhttp.responseText);
if (xmlhttp.responseText.includes("S0000")) {
Alert.alert("Başarılı ", "başarıyla sonuçlandı. ", [
{text: 'Tamam', onPress: () => cancel()},
],
{cancelable: true}
)
} else {
Alert.alert("Hata", "Lütfen Daha Sonra Tekrar Deneyiniz", [
{text: 'Tamam', onPress: () => null},
],
{cancelable: true}
) //it always here because response always null
}
};
xmlhttp.send(sr);
//console.log(xmlhttp);
};
<uses-permission android:name="android.permission.ACCESS_NETWORK_STATE" />
//android manifest
<uses-permission android:name="android.permission.INTERNET" />
<uses-permission android:name="android.permission.WRITE_CONTACTS" />
<uses-permission android:name="android.permission.READ_PROFILE" />
<uses-permission android:name="android.permission.VIBRATE"/>
<queries>
<intent>
<action android:name="android.intent.action.VIEW" />
<data android:mimeType="*/*" />
</intent>
</queries>
<application
android:name=".MainApplication"
android:label="#string/app_name"
android:icon="#mipmap/ic_launcher"
android:roundIcon="#mipmap/ic_launcher_round"
android:usesCleartextTraffic="true"
android:allowBackup="false"
android:theme="#style/AppTheme">
<activity
android:name=".MainActivity"
android:label="#string/app_name"
android:configChanges="keyboard|keyboardHidden|orientation|screenLayout|screenSize|smallestScreenSize|uiMode"
android:launchMode="singleTask"
android:windowSoftInputMode="adjustResize"
android:exported="true">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
</activity>
</application>
Powershell: Copy Elements from one array to another
Hi in my first array there are my nodes from a xml.
$result=Select-xml -xml $uar -xpath "//test:UAVariable[contains(#NodeId,'ns=1;s=::')][starts-with(#DataType,'i=')]" -namespace $ns | select -ExpandProperty node
now i have to filter this further more like this. And then if both if´s are true delete the element from my array if its possible or copy this Element to a new one.
$result | foreach {
$AttExists = $_.Arraydimensions
$NodeExists = $_.References.Reference.ReferenceType
if ($AttExists){
if ($NodeExists -eq 'HasComponent'){
#if this is happening i want to delete this hole Element (Node) in my array is this possible?
}
else{
#if deleting is not possible i want to copy these Element (Node) into a new array is this possible?
}
}
}
Tried several things like:
$_=$nullor whith a counter like $newArray[$i] = $result[$j] $i++
But it dont delete anything or copy it. Can someone help me?
xml data :
<?xml version="1.0" encoding="utf-8"?>
<UANodeSet xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:uax="http://opcfoundation.org/UA/2008/02/Types.xsd" xmlns:ua="http://xxx/NodeSet.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:pv="http://yyy/NodeSet.xsd" xmlns="http://opcfoundation.org/UA/2011/03/UANodeSet.xsd">
<UAObject NodeId="ns=1;s=::" BrowseName="1:::">
<DisplayName><Default></DisplayName>
<References>
<Reference ReferenceType="HasTypeDefinition">ns=2;i=10001</Reference>
<Reference ReferenceType="Organizes" IsForward="false">ns=2;i=20001</Reference>
<Reference ReferenceType="Organizes">ns=1;s=::AsGlobalPV</Reference>
<Reference ReferenceType="Organizes">ns=1;s=::Program</Reference>
</References>
<Extensions>
<Extension>
<pv:ObjectExtension>
<ACL>
<ACE Role="1" Allow="0x017F"/>
<ACE Role="2" Allow="0x015F"/>
</ACL>
</pv:ObjectExtension>
</Extension>
</Extensions>
</UAObject>
<UAObject ParentNodeId="ns=1;s=::" NodeId="ns=1;s=::AsGlobalPV" BrowseName="1:Global PV">
<DisplayName>Global PV</DisplayName>
<References>
<Reference ReferenceType="HasTypeDefinition">i=61</Reference>
<Reference ReferenceType="Organizes" IsForward="false">ns=1;s=::</Reference>
<Reference ReferenceType="Organizes">ns=1;s=::AsGlobalPV:gFahrzeug</Reference>
<Reference ReferenceType="Organizes">ns=1;s=::AsGlobalPV:gLebewesen</Reference>
</References>
</UAObject>
<UAVariable DataType="ns=1;i=100000" ParentNodeId="ns=1;s=::AsGlobalPV" NodeId="ns=1;s=::AsGlobalPV:gFahrzeug" BrowseName="1:gFahrzeug" AccessLevel="3" ValueRank="-1">
<DisplayName>gFahrzeug</DisplayName>
<References>
<Reference ReferenceType="HasTypeDefinition">ns=1;i=100005</Reference>
<Reference ReferenceType="HasComponent">ns=1;s=::AsGlobalPV:gFahrzeug.Kraftfahrzeug</Reference>
</References>
<Extensions>
<Extension>
<pv:VariableExtension AuditEvents="true">
<Value>
<Binding Type="PV" Target="::gFahrzeug"/>
</Value>
</pv:VariableExtension>
</Extension>
</Extensions>
</UAVariable>
<UAVariable DataType="ns=1;i=100010" ParentNodeId="ns=1;s=::AsGlobalPV:gFahrzeug" NodeId="ns=1;s=::AsGlobalPV:gFahrzeug.Kraftfahrzeug" BrowseName="1:Kraftfahrzeug" AccessLevel="3" ValueRank="-1">
<DisplayName>Kraftfahrzeug</DisplayName>
<References>
<Reference ReferenceType="HasTypeDefinition">ns=1;i=100015</Reference>
<Reference ReferenceType="HasComponent">ns=1;s=::AsGlobalPV:gFahrzeug.Kraftfahrzeug.LKW</Reference>
<Reference ReferenceType="HasComponent">ns=1;s=::AsGlobalPV:gFahrzeug.Kraftfahrzeug.PKW</Reference>
</References>
<Extensions>
<Extension>
<pv:VariableExtension AuditEvents="true">
<Value>
<Binding Type="PV" Target="::gFahrzeug.Kraftfahrzeug"/>
</Value>
</pv:VariableExtension>
</Extension>
</Extensions>
</UAVariable>
<UAVariable DataType="i=3" ParentNodeId="ns=1;s=::AsGlobalPV:gFahrzeug.Kraftfahrzeug" NodeId="ns=1;s=::AsGlobalPV:gFahrzeug.Kraftfahrzeug.LKW" BrowseName="1:LKW" AccessLevel="3" ValueRank="1" ArrayDimensions="2">
<DisplayName>LKW</DisplayName>
<References>
<Reference ReferenceType="HasTypeDefinition">i=63</Reference>
<Reference ReferenceType="HasComponent">ns=1;s=::AsGlobalPV:gFahrzeug.Kraftfahrzeug.LKW[0]</Reference>
<Reference ReferenceType="HasComponent">ns=1;s=::AsGlobalPV:gFahrzeug.Kraftfahrzeug.LKW[1]</Reference>
</References>
<Extensions>
<Extension>
<pv:VariableExtension AuditEvents="true">
<Value>
<Binding Type="PV" Target="::gFahrzeug.Kraftfahrzeug.LKW"/>
</Value>
</pv:VariableExtension>
</Extension>
</Extensions>
</UAVariable>
<UAVariable DataType="i=3" ParentNodeId="ns=1;s=::AsGlobalPV:gFahrzeug.Kraftfahrzeug.LKW" NodeId="ns=1;s=::AsGlobalPV:gFahrzeug.Kraftfahrzeug.LKW[0]" BrowseName="1:LKW[0]" AccessLevel="3">
<DisplayName>LKW[0]</DisplayName>
<References>
<Reference ReferenceType="HasTypeDefinition">i=63</Reference>
</References>
<Extensions>
<Extension>
<pv:VariableExtension AuditEvents="true">
<ACL>
<ACE Role="1" Allow="0x017F"/>
<ACE Role="2" Allow="0x015F"/>
</ACL>
<Value>
<Binding Type="PV" Target="::gFahrzeug.Kraftfahrzeug.LKW[0]"/>
</Value>
</pv:VariableExtension>
</Extension>
</Extensions>
</UAVariable>
<UAVariable DataType="i=3" ParentNodeId="ns=1;s=::AsGlobalPV:gFahrzeug.Kraftfahrzeug.LKW" NodeId="ns=1;s=::AsGlobalPV:gFahrzeug.Kraftfahrzeug.LKW[1]" BrowseName="1:LKW[1]" AccessLevel="3">
<DisplayName>LKW[1]</DisplayName>
<References>
<Reference ReferenceType="HasTypeDefinition">i=63</Reference>
</References>
<Extensions>
<Extension>
<pv:VariableExtension AuditEvents="true">
<ACL>
<ACE Role="1" Allow="0x017F"/>
<ACE Role="2" Allow="0x015F"/>
</ACL>
<Value>
<Binding Type="PV" Target="::gFahrzeug.Kraftfahrzeug.LKW[1]"/>
</Value>
</pv:VariableExtension>
</Extension>
</Extensions>
</UAVariable>
</UANodeSet>
Code:
[xml]$uar = Get-Content -Path 'C:\Users\strobel.ma\OneDrive - GEA\Desktop\XML to String\OpcUaMap(3)_28_07.uar'
$ns = New-Object System.Xml.XmlNamespaceManager($uar.NameTable) #asdf
$ns=#{GEA="http://opcfoundation.org/UA/2011/03/UANodeSet.xsd";
ua="http://br-automation.com/OpcUa/configuration/NodeSet.xsd";
xsi="http://www.w3.org/2001/XMLSchema-instance";
uax="http://opcfoundation.org/UA/2008/02/Types.xsd";
xsd="http://www.w3.org/2001/XMLSchema";
pv="http://br-automation.com/OpcUa/PLC/PV.xsd"}
$result=Select-xml -xml $uar -xpath "//GEA:UAVariable[contains(#NodeId,'ns=1;s=::')][starts-with(#DataType,'i=')]" -namespace $ns | select -ExpandProperty node
$result | foreach {$_.NodeId = $_.NodeId -replace 'ns=1;s=::AsGlobalPV:'}
$result | foreach {$_.NodeId = $_.NodeId -replace 'ns=1;s=::'}
$result | foreach {
$AttExists = $_.Arraydimensions
$NodeExists = $_.References.Reference.ReferenceType
if ($AttExists){
if ($NodeExists -eq 'HasComponent'){
#if this is happening i want to delete this hole Element (Node) in my array is this possible?
}
else{
#if deleting is not possible i want to copy these Element (Node) into a new array is this possible?
}
}
}
I would suggest you a naive approach and just create a new $result2 object where you store exactly what you need I guess the default System.Array type should be good enough: declare the new variable where to store items: $result2 = #() and store in it whatever you want by using in your foreach loop the following: $result2 += $_
can the camel splitter skip on messages rows of some value like empty or null?
I have camel route on ingress of files recieved, sometimes these files contain multiple can be thousands of empty rows or records. these occur at the end of the files.
help or advice on how to handle this situation.
2/3/20 0:25,12.0837099,22.07255971,51.15338002,52.76662495,52.34712651,51.12155216,45.7655507,49.96555147,54.47205637,50.66135512,54.43864717,54.31627797,112.11765,1305.89126,1318.734411,52.31780487,44.27374363,48.72548294,43.01383257,23.85434055,41.98898447,47.50916052,31.13055873,112.2747269,0.773642045,1.081464888,2.740194779,1.938788885,1.421660186,0.617588546,21.28219363,25.03362771,26.76627344,40.21132809,29.72854555,33.45911109
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
The route goes to a splitter.
<route autoStartup="true" id="core.predix.accept.file.type.route">
<from id="_from3" uri="{{fileEntranceEndpoint}}"/>
<convertBodyTo id="_convertBodyTo1" type="java.lang.String"/>
<split id="_split1" strategyRef="csvAggregationStrategy" streaming="true" stopOnException="true">
<tokenize token="\n"/>
<process id="_process3" ref="toCsvFormat"/>
<!-- passthru only we do not allow embedded commas in numeric data -->
</split>
<log id="_log1" loggingLevel="INFO" message="CSV body: ${body}"/>
<choice id="_choice1">
<when id="_when1">
<simple>${header.CamelFileName} regex '^.*\.(csv|CSV|txt|gpg)$'</simple>
<log id="_log2" message="${file:name} accepted for processing..."/>
<choice id="_choice2">
<when id="_when2">
<simple>${header.CamelFileName} regex '^.*\.(CSV|txt|gpg)$'</simple>
<setHeader headerName="CamelFileName" id="_setHeader1">
<simple>${file:name.noext.single}.csv</simple>
</setHeader>
<log id="_log3" message="${file:name} changed file name."/>
</when>
</choice>
<split id="_split2" streaming="true">
<tokenize prop:group="noOfLines" token="\n"/>
<log id="_log4" message="Split Group Body: ${body}"/>
<to id="_to1" uri="bean:extractHeader"/>
<to id="acceptedFileType" ref="predixConsumer"/>
</split>
<to id="_to2" uri="bean:extractHeader?method=cleanHeader"/>
</when>
<otherwise id="_otherwise1">
<log id="_log5" loggingLevel="INFO" message="${file:name} is an unknown file type, sending to unhandled repo."/>
<to id="_to3" uri="{{unhandledArchive}}"/>
</otherwise>
</choice>
</route>
The simple aggregator
public class CsvAggregationStrategy implements AggregationStrategy {
private Logger log = LoggerFactory.getLogger(CsvAggregationStrategy.class.getName());
#Override
public Exchange aggregate(Exchange oldExchange, Exchange newExchange) {
//Theory
//-------------------------------------------------------------------------------------
// Arrived | oldExchange | newExchange | Description
//-------------------------------------------------------------------------------------
// A | NULL | A | first message arrives for the first group
// B | A | B | second message arrives for the first group
// F | NULL | F | first message arrives for the second group
// C | AB | C | third message arrives for the first group
//---------------------------------------------------------------------------------------
log.debug("Aggregation Strategy :: start");
if ( newExchange.getException() != null ) {
if ( oldExchange == null ) {
return newExchange;
} else {
oldExchange.setException(newExchange.getException());
return oldExchange;
}
}
if ( oldExchange == null ) { //This will set the 1st record with the Header
return newExchange;
}
String newBody = newExchange.getIn().getBody(String.class);
String oldBody = oldExchange.getIn().getBody(String.class);
String body = oldBody + newBody;
oldExchange.getIn().setBody( body );
log.debug("Aggregation Strategy :: finish");
return oldExchange;
} //Exchange process
} //class AggregationStrategy
I thought I would handle the empty rows in the class toCsvFormat
The class ToCsvFormat simply changes the inbound csv delimiter to a comma.
public class ToCsvFormat implements Processor {
private static final Logger LOG = LoggerFactory.getLogger(ToCsvFormat.class);
#Override
public void process(Exchange exchange) throws Exception {
String body = exchange.getIn().getBody(String.class);
body = body.replaceAll("\\t|;",",");
String bodyCheck = body.replaceAll(",","").trim();
LOG.info("BODY CHECK: " + bodyCheck);
if ( bodyCheck.isEmpty() || bodyCheck == null ) {
throw new IllegalArgumentException("Data record is Empty or NULL. Invalid Data!");
} else {
StringBuilder sb = new StringBuilder(body.trim());
LOG.debug("CSV Format Body In: " + sb.toString());
LOG.debug("sb length: " + sb.length());
if ( sb.toString().endsWith(",") ) {
sb.deleteCharAt(sb.lastIndexOf(",", sb.length()));
}
LOG.info("CSV Format Body Out: " + sb.toString());
sb.append(System.lineSeparator());
exchange.getIn().setBody(sb.toString());
}
}
}
*** the problem I'm having is I need the splitter to finish processing until it hits all the empty rows, or skip over or stop the splitter on empty records. but I need what was previously split or processed. Throwing and capture of exception stops the splitter I get nothing. I'm using the splitter stoponexception but like it says, it stops on the exception.
thank you
So you set up stopOnException=true and asked why your route stopped when exception wasn't catched =) ? As workaround forget about throwing exception and validate your body and if it has inappropriate data just set empty body and then sum them in your AggregationStrategy like in pseudo-route below. I haven't used the xml description for a very long time so i hope your will understand this example with Java DSL.
public class ExampleRoute extends RouteBuilder {
AggregationStrategy aggregationStrategy = new AggregationStrategy() {
#Override
public Exchange aggregate(final Exchange oldExchange, final Exchange newExchange) {
log.debug("Aggregation Strategy :: start");
if (oldExchange != null) {
newExchange.getIn().setBody(newExchange.getIn().getBody(String.class) + oldExchange.getIn().getBody(String.class));
}
log.debug("Aggregation Strategy :: finish");
return newExchange;
}
};
#Override
public void configure() throws Exception {
from("{{fileEntranceEndpoint}}")
.convertBodyTo(String.class)
.split(tokenize("\n"), aggregationStrategy).streaming().stopOnException()
.choice()
.when(body().regex(",+\\$"))
.setBody(constant(""))
.otherwise()
.process("toCsvFormat")
;
}
I recommend you use Java DSL. As you can see, many things are easy to use with it.
Thank you C0ld. Appreciate going easy. yeah, I get it. sometimes we do silly things, why another pair of eyes is a wonderful thing. I took your suggestion and it works like a charm. thank you very much for responding.
<split id="_split1"
strategyRef="emptyRecordAggregationStrategy" streaming="true">
<tokenize token="\n"/>
<choice id="_choice5">
<when id="_when5">
<simple>${body} regex '^,+$'</simple>
<setBody id="_setBody1">
<constant/>
</setBody>
</when>
<otherwise>
<process id="_processCSV" ref="toCsvFormat"/>
</otherwise>
</choice>
</split>
public class EmptyRecordAggregationStrategy implements AggregationStrategy {
private Logger log = LoggerFactory.getLogger(EmptyRecordAggregationStrategy.class.getName());
#Override
public Exchange aggregate(Exchange oldExchange, Exchange newExchange) {
if ( newExchange.getException() != null ) {
if ( oldExchange == null ) {
newExchange.getIn().setBody(newExchange.getIn().getBody(String.class) + System.lineSeparator());
return newExchange;
} else {
oldExchange.getIn().setBody(oldExchange.getIn().getBody(String.class) + System.lineSeparator());
return oldExchange;
}
}
if ( oldExchange == null ) {
newExchange.getIn().setBody(newExchange.getIn().getBody(String.class) + System.lineSeparator());
return newExchange;
}
if ( !newExchange.getIn().getBody(String.class).isEmpty() ) {
oldExchange.getIn().setBody(oldExchange.getIn().getBody(String.class) + newExchange.getIn().getBody(String.class) + System.lineSeparator());
}
return oldExchange;
}
}
msbuild itemgroup items
I have msbuild file which is executing batch file.
Msbuild file:
<PropertyGroup>
<ItemAString>Green;Red;Blue</ItemAString>
<ItemBString>Uno;Due;Tre</ItemBString>
<ItemCString>Song;Movie;Picture</ItemCString>
</PropertyGroup>
<ItemGroup>
<ItemsA Include="$(ItemAString.Split(';'))" />
<ItemsB Include="$(ItemBString.Split(';'))" />
<ItemsC Include="$(ItemCString.Split(';'))" />
</ItemGroup>
<Target Name = "CallBatch">
<!-- THIS DOES NOT WORK -->
<Exec Command="mybatch.bat %(ItemsA.Identity) %(ItemsB.Identity) %(ItemsC.Identity)" />
</Target>
Batch file is very simple:
echo Params = [%1] - [%2] - [%3]
I want to get next output:
Params = Green - Uno - Song
Params = Red - Due - Movie
Params = Blue - Movie - Picture
How to achieve this?
I found solution:
<Project DefaultTarget="DoTheMagic" xmlns="http://schemas.microsoft.com/developer/msbuild/2003" ToolsVersion="12.0">
<PropertyGroup Condition=" '$(TFP)'=='' ">
<TFP>$(MSBuildToolsPath)\Microsoft.Build.Tasks.v4.0.dll</TFP>
<TFP Condition=" !Exists('$(TFP)')">$(MSBuildFrameworkToolsPath)\Microsoft.Build.Tasks.v4.0.dll</TFP>
<TFP Condition=" !Exists('$(TFP)')">$(windir)\Microsoft.NET\Framework\v4.0.30319\Microsoft.Build.Tasks.v4.0.dll</TFP>
</PropertyGroup>
<UsingTask
TaskName="Bukake"
TaskFactory="CodeTaskFactory"
AssemblyFile="$(TFP)" >
<ParameterGroup>
<ItemsA Required="True" ParameterType="System.String"/>
<ItemsB Required="True" ParameterType="System.String"/>
<ItemsC Required="True" ParameterType="System.String"/>
<Result ParameterType="Microsoft.Build.Framework.ITaskItem[]" Output="True"/>
</ParameterGroup>
<Task>
<Code Type="Fragment" Language="cs">
<![CDATA[
string[] itemsA = ItemsA.Split(new char[] {';'}, StringSplitOptions.RemoveEmptyEntries);
string[] itemsB = ItemsB.Split(new char[] {';'}, StringSplitOptions.RemoveEmptyEntries);
string[] itemsC = ItemsC.Split(new char[] { ';' }, StringSplitOptions.RemoveEmptyEntries);
List<TaskItem> items = new List<TaskItem>();
for (int index = 0; index < itemsA.Length; index++)
{
TaskItem item = new TaskItem();
item.ItemSpec = "item";
item.SetMetadata("itemA", itemsA[index]);
item.SetMetadata("itemB", itemsB[index]);
item.SetMetadata("itemC", itemsC[index]);
items.Add(item);
}
Result = items.ToArray();
]]>
</Code>
</Task>
</UsingTask>
<PropertyGroup>
<ItemAString>Green;Red;Blue</ItemAString>
<ItemBString>Uno;Due;Tre</ItemBString>
<ItemCString>Song;Movie;Picture</ItemCString>
</PropertyGroup>
<Target Name = "CallBatch">
<Message Text="$(TFS)" />
<Bukake ItemsA="$(ItemAString)"
ItemsB="$(ItemBString)"
ItemsC="$(ItemCString)">
<Output TaskParameter="Result" ItemName="Dundonja" />
</Bukake>
<ItemGroup>
<PreparedItems Include="#(Dundonja)"/>
</ItemGroup>
<!-- <Message Text="Dundonja: %(Dundonja.Identity) %(Dundonja.itemA) %(Dundonja.itemB) %(Dundonja.itemC)"/> -->
<Exec Command="mybatch.bat Dundonja %(Dundonja.Identity) %(Dundonja.itemA) %(Dundonja.itemB) %(Dundonja.itemC)"/>
</Target>
ActiveDirectoryMembershipProvider - Can't use secure connection protection
I try to use ASP.Net's MembershipProvider to give access only to certain users. This is backed up by an ADAM instance.
I use some test-code which runs just fine:
public static DataTable getADValuesByParameter(string strFilter, string strLDAPUser, string strLDAPPath, string strLDAPPWD, string strLDAPProperties)
{
DataTable functionReturnValue = default(DataTable);
string[] arrLDAP = null;
DirectoryEntry rootEntry = new DirectoryEntry();
DirectorySearcher searcher = new DirectorySearcher();
SearchResultCollection results = default(SearchResultCollection);
DataTable dtExchangeUserData = new DataTable();
arrLDAP = strLDAPProperties.Split(new char[] { ',' });
rootEntry.Path = strLDAPPath;
rootEntry.Username = strLDAPUser;
rootEntry.Password = strLDAPPWD;
rootEntry.AuthenticationType = AuthenticationTypes.Secure;
searcher.SearchRoot = rootEntry;
searcher.SearchScope = SearchScope.Subtree;
searcher.Filter = strFilter;
searcher.PropertiesToLoad.AddRange(arrLDAP);
//var value = rootEntry.NativeObject;
results = searcher.FindAll();
Int16 si = default(Int16);
foreach (SearchResult result in results)
{
si = 0;
object[] arrKeyValue = new object[result.Properties.Count - 1];
// -2 weil property "adspath" nicht dazu gehört, und .count -1 weil 0 basierendes array
if ((result != null))
{
System.Collections.IEnumerator myEnumerator = arrLDAP.GetEnumerator();
while (myEnumerator.MoveNext())
{
foreach (string Key in result.Properties.PropertyNames)
{
if (Key != "adspath")
{
if (Key.Equals(((string)myEnumerator.Current).ToLower()))
{
if (dtExchangeUserData.Columns[Key] == null)
dtExchangeUserData.Columns.Add(Key);
if (Key.Equals("objectguid"))
{
arrKeyValue[si] = new Guid(((byte[])result.Properties[Key][0]));
}
else
{
arrKeyValue[si] = result.Properties[Key][0].ToString();
}
si++;
}
}
}
}
if (arrKeyValue.Length > 0)
dtExchangeUserData.Rows.Add(arrKeyValue);
}
}
functionReturnValue = dtExchangeUserData;
dtExchangeUserData.Dispose();
rootEntry.Close();
rootEntry.Dispose();
return functionReturnValue;
}
Here, I query the ADAM manually. Although the code is badly written, it works. Note how I use "AuthenticationTypes.Secure".
Now, when I try to do the same thing (same connectionPath, username, password and so on) with the ActiveDirectoryMembershipProvider, it gives me (roughly translated from German):
ConfigurationErrorsException: Can't
establish a secure connection over
SSL.
This happens when I call
Membership.ValidateUser()
Here are the relevant parts from the Web.config file:
<connectionStrings>
<add name="ADConnectionString" connectionString="LDAP://server.com/OU=users,DC=test,DC=adam"/>
</connectionStrings>
<authentication mode="Forms" >
<forms loginUrl="~/Login.aspx/Test/" timeout="2880" />
</authentication>
<authorization>
<deny users ="?" />
</authorization>
<!--<identity impersonate="true" />-->
<trust level="Full" />
<membership defaultProvider="MyMembershipProvider">
<providers>
<add name="MyMembershipProvider"
type="System.Web.Security.ActiveDirectoryMembershipProvider, System.Web, Version=2.0.0.0,Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
connectionStringName="ADConnectionString"
connectionUsername="[domain]\[user]"
connectionPassword="[password]"
connectionProtection="Secure"
enableSearchMethods="true"
/>
</providers>
</membership>
It doesn't matter whether I use impersonation or not (to be honest, I don't really know what it does anyway). Trust-level doesn't change anything either.
When I use connectionProtection="None" instead, it gives me (again translated) "Wrong username or password". I get the same error when I use "AuthenticationTypes.None" in the manual example.
What am I doing wrong?
Thanks for your time...