I'm trying to include a custom file into my program in C, and it compiles ok. However, VsCodium keeps complaining about "Squiggles" and "includePath" (don't know what that means), actually, I don't know precisely how to configure the ".vscode/c_cpp_properties.json" file as I am using WSL to compile the code and VsCodium is installed on Windows.
Here is the line:
#include "./types.h"
// #include errors detected. Please update your includePath. Squiggles are disabled for this translation unit (\\wsl$\Arch\home\{*}\{*}\{*}.c).C/C++(1696)
// cannot open source file "./types.h"
What should I do? It's a little annoying although it's working
Go to File->Preferences->Settings.
Optional: Switch to the Workspace tab (if you only want this to take effect on the current workspace).
In the search box, type in c_cpp include path or something similar.
Find the C_Cpp->Default: Include path field, then click Add item.
Enter your include path which contains the file you want to include.
Related
The problem I encountered in using GCC is that I cannot use the command make to build my program because some files contain the paths of their actual location.
Say I have a file named "machine.h", its content is target-pisa/pisa.h. At the same time, in the same working directory, I have a folder named "target-pisa", in which there is a file named "pisa.h"; the actual code of the header file "machine.h" is actually inside the file "pisa.h", which is inside the folder named "target-pisa" located in the same working directory as "machine.h".
Assume for some reason I cannot simply copy and paste the code from "pisa.h" to "machine.h"; that is, I have to stick with what is provided by the prof. The make command does not work in this case in my laptop because it cannot interpret target-pisa/pisa.h as a directory path and open the actual header file "pisa.h" according to the path target-pisa/pisa.h provided in the file "machine.h". Instead, git bash interprets target-pisa/pisa.h as C code (if I am not mistaken); see the figure below.
Some additional info that may be helpful:
In machine.h, there is only one line of code as shown below:
target-pisa/pisa.h
I have checked that almost all .c files in the working directory have #include "machine.h".
How can I solve this problem? Please help, I have been stuck in this for a long time. By the way, my friend also used git bash to do this lab and this problem doesn't happen to him.
I tried to reinstall git bash in order to see if the problem can be solved, but it didn't.
All in all, I want to build the program successfully by using make command in git bash.
machine.h needs to have an #include directive to tell the compiler to pull in the nested header.
#include "target-pisa/pisa.h"
Just writing target-pisa/pisa.h by itself isn't valid C code.
I'm trying to include a folder that contains a combination of around 60 .h and .hpp files. This folder contains libraries for programming robots with a Wallaby (a mini-computer-like device) for Botball competition. include is located in the same place as main.c (inside code). Up until now, this is what my header for including libraries looks like:
#include "../code/include/accel.h"
Just like accel.h, I have 60 other .h and .hpp files inside include. So, coming to my question, do I need to type out all the 60 header lines? or is there a way to include the include folder.
I'm using Clion for this project, if I can't include the folder itself, does anyone know of a shortcut in Clion to include all the files in include.
I was also thinking of using some sort of placeholder for the folder name and only specify the file type. So, for example: #include "../code/include/(generic placeholder name).h". I have no clue if something like this exists.
I would also request you to keep in mind that I'm a beginner to programming, so please keep your answers simple.
This is just for some extra info:
The Wallaby is a mini computer to which you would connect your sensors, motors, servos and cameras in order to control a robot for the Botball competition. Usually, one can connect to the Wallaby either via Wifi Direct or a cable and write programs on it directly through an online interface (not entirely sure of the word for it, but you just type in an IP address in your browser and it brings up an interface where you can make projects and code). All the code written in that interface saves directly onto the Wallaby. Here the default include statement is #include <kipr/botball.h>, so I'm assuming that botball.h (which is located on the Wallaby's storage) has all those 60 libraries consolidated in it. I got the include folder that I'm using from GitHub. This link was provided to me by one of the Botball organisers. So the main point in me trying to download the library is so that I can write and successfully compile code even when I'm not connected to the Wallaby. Hope this provides some relevant context.
Thank you for your answers!
What I'd do is
Create (maybe with scripting tools or a specific program) a "all.h" file which includes all the other header files
#ifndef ALL_INCLUDED
#define ALL_INCLUDED
#include "accel.h"
#include "bccel.h"
//...
#include "zccel.h"
#endif
Include "all.h" in your main file
#include "../code/include/all.h"
You can create "all.h" automatically every time you build your code.
CLion is an IDE for Clang and GCC. These compilers are instructed to search paths for include files by specifying -I<path> command line arguments. Any number may be specified, and they are searched in the order given, and the first match found is the file that gets included.
I am not familiar with CLion specifically but no doubt it has a dialog somewhere where you can set header file search paths.
Edit: It seems that CLion may not make this so straightforward. I understand that you have to add then via CMake: https://cmake.org/cmake/help/v3.0/command/include_directories.html#command:include_directories, but after that, the IDE will not recognise the header in the editor and will warn you of unrecognised files and will not provide code comprehension features. I believe it will build nonetheless.
I am trying to use the following method to include a project header file:
#include FILE_PATH
Where FILE_PATH is defined as the file to be included.
The project compiles without errors if FILE_PATH is include as:
#define FILE_PATH "hal/micro/config.h"
#include FILE_PATH
But if FILE_PATH is pre-defined as a compiler define option inside the project options, then building the project returns the following error:
Error #13: Expected a file name
The development software being used is Code Composer Studio version 6.
What am I missing here to pre-define the header file path in a project?
Additional Details:
I am in the process of converting a working project from the IAR embedded workbench IDE to Code Composer Studio. The Pre-define NAME (--define, -D) shown in the picture below are mostly identical to how they were in the IAR project.
The pre-define name boxed in red is currently the cause of the error, but this could occur with any of the other defines with file pathnames.
I have tried the suggestion of using the #ifdef statement to at least verify that PLATFORM_HEADER is actually defined and it does seem to be defined. I also checked for typos and there doesn't appear to be any noticeable typos.
The key reason for wanting to go with the pre-defined macro approach is to avoid individually making changes to numerous files affected by this error.
I still have not yet tried a command line compile, since I need to reference the manual on how to do so, but I will try as soon as I figure it out.
#StenSoft wrote:
The IDE does not correctly escape the parameters. You should escape the quotes. You can also try placing PLATFORM_HEADER somewhere in the code and see what the compiler would tell you it sees.
Is there a way to make the Eclipse editor presume that a specific C header file has already been included, without having to #include it explicitly?
For example, how can we achieve:
#include "common_type_defs.h"
#include "special_type_defs.h" // Don't want to have to mention this header file
main()
{
common_type var1;
special_type var2;
.....
}
by writing only:
#include "common_type_def.h"
main()
{
common_type var1;
special_type var2; // Eclipse editor: "Symbol 'special_type' could not be resolved"
.....
}
without getting the Eclipse editor annotation error: "Symbol 'special_type' could not be resolved".
The reason is, the project uses a custom scripted build system. The special header files are added automatically by the build system, selected from different libraries. So the build succeeds.
I have added the special header folder to the include paths of the project. This allows me to hit [F3] and jump to the definition of "special_type". It is just that the editor flags an error.
I do not want to silence the error because I want to catch real errors.
Any suggestions?
Go to:
Project properties → C/C++ General → Preprocessor Include Paths, Macros etc. → Entries → GNU C
Select CDT User Setting Entries and than click Add button. Select Include File and enter your preprocessor pre-include file here.
Apply and rebuild indexer.
I am using Oxygen.1a Release (4.7.1a)
Do additional define in your build system and then:
#ifndef CUSTOMBUILDER
#include "special_type_defs.h" // Don't want to have to mention this header file
#endif
I ended up creating different "build configurations", for each build option of the build system. There I can add the background header files, as required.
One disadvantage is that I must maintain the different build configurations to mirror the build system: when new header files are added to the build system, the same files must also be added to the eclipse build configuration. So this solution will be unsuitable for big team projects where multiple people frequently change the included files because you could easily miss a file change or two. But it works well for small teams and infrequent changes.
Vim is pretty smart when it comes to C, so if one inserts a bogus header file such as #include <stdioo.h>, it complains by bringing up a location list with the following error:
foo.c:1|20| fatal error: stdioo.h: No such file or directory
|| compilation terminated.
Which is great, but for whatever reason, I get the same error when including the <mpi.h> header file. I know this is a vim problem b/c I can compile and execute the program with mpicc and mpiexec, respectively. Besides it being extremely irritating having it pop up every time I save the file, all syntax errors are ignored when this happens.
Is there any way to instruct vim to ignore this header file, or at least all the header files?
WHERE on your filesystem is the <mpi.h> file located?
Often it's one level down, such as /usr/include/mpi/mpi.h and would require <mpi/mpi.h> to access it.
You may need to add another directory path to the -I option list of your compiler, or add the directory path to VIM's path option variable
:help 'path
Will get you started on the VIM side, you'll need to look up how to add options to your current setup, no idea if you're using cmake, make, visual something, netclipse or whatever.
But a simple 'locate mpi.h' would be the place to start, since you know it's there.
You said "pop-up" ... are you using syntastic or such? Again, finding the proper path would help there too. Evidently mpicc knows the proper path to the include files, you just need to tell VIM. (via the 'path' option)