Effect of Wide Characters/ Strings on a C Program - c

Below is an excerpt from an old edition of the book Programming Windows by Charles Petzold
There are, of course, certain disadvantages to using Unicode. First and foremost is that every string in your program will occupy twice as much space. In addition, you'll observe that the functions in the wide-character run-time library
are larger than the usual functions.
Why would every string in my program occupy twice the bytes, should not only the character arrays we've declared as storing wchar_t type do so?
Is there perhaps some condition that if a program is to be able to work with Long values, then the entire program mode it'll operate on is altered?
Usually if we declare a long int, we never fuss over or mention the fact that all ints will be occupying double the memory now. Are strings somehow a special case?

Why would every string in my program occupy twice the bytes, should not only the character arrays we've declared as storing wchar_t type do so?
As I understand it, it is meant, that if you have a program that uses char *, and now you rewrite that program to use wchar_t *, then it will use (more than) twice the bytes.

If a string could potentially contain a character outside of the ascii range, you'll have to declare it as a wide string. So most strings in the program will be bigger. Personally, I wouldn't worry about it; if you need Unicode, you need Unicode, and a few more bytes aren't going to kill you.
That seems to be what you're saying, and I agree. But the question is skating the fine line between opinionated and objective.

Unicode have some types : utf8, utf16 utf32. https://en.wikipedia.org/wiki/Unicode.
You can check advantage , disadvantage of them to know what situation you should use .
reference: UTF-8, UTF-16, and UTF-32

Related

String array in C prints whole array instead of value at pointer [duplicate]

As much as I love C and C++, I can't help but scratch my head at the choice of null terminated strings:
Length prefixed (i.e. Pascal) strings existed before C
Length prefixed strings make several algorithms faster by allowing constant time length lookup.
Length prefixed strings make it more difficult to cause buffer overrun errors.
Even on a 32 bit machine, if you allow the string to be the size of available memory, a length prefixed string is only three bytes wider than a null terminated string. On 16 bit machines this is a single byte. On 64 bit machines, 4GB is a reasonable string length limit, but even if you want to expand it to the size of the machine word, 64 bit machines usually have ample memory making the extra seven bytes sort of a null argument. I know the original C standard was written for insanely poor machines (in terms of memory), but the efficiency argument doesn't sell me here.
Pretty much every other language (i.e. Perl, Pascal, Python, Java, C#, etc) use length prefixed strings. These languages usually beat C in string manipulation benchmarks because they are more efficient with strings.
C++ rectified this a bit with the std::basic_string template, but plain character arrays expecting null terminated strings are still pervasive. This is also imperfect because it requires heap allocation.
Null terminated strings have to reserve a character (namely, null), which cannot exist in the string, while length prefixed strings can contain embedded nulls.
Several of these things have come to light more recently than C, so it would make sense for C to not have known of them. However, several were plain well before C came to be. Why would null terminated strings have been chosen instead of the obviously superior length prefixing?
EDIT: Since some asked for facts (and didn't like the ones I already provided) on my efficiency point above, they stem from a few things:
Concat using null terminated strings requires O(n + m) time complexity. Length prefixing often require only O(m).
Length using null terminated strings requires O(n) time complexity. Length prefixing is O(1).
Length and concat are by far the most common string operations. There are several cases where null terminated strings can be more efficient, but these occur much less often.
From answers below, these are some cases where null terminated strings are more efficient:
When you need to cut off the start of a string and need to pass it to some method. You can't really do this in constant time with length prefixing even if you are allowed to destroy the original string, because the length prefix probably needs to follow alignment rules.
In some cases where you're just looping through the string character by character you might be able to save a CPU register. Note that this works only in the case that you haven't dynamically allocated the string (Because then you'd have to free it, necessitating using that CPU register you saved to hold the pointer you originally got from malloc and friends).
None of the above are nearly as common as length and concat.
There's one more asserted in the answers below:
You need to cut off the end of the string
but this one is incorrect -- it's the same amount of time for null terminated and length prefixed strings. (Null terminated strings just stick a null where you want the new end to be, length prefixers just subtract from the prefix.)
From the horse's mouth
None of BCPL, B, or C supports
character data strongly in the
language; each treats strings much
like vectors of integers and
supplements general rules by a few
conventions. In both BCPL and B a
string literal denotes the address of
a static area initialized with the
characters of the string, packed into
cells. In BCPL, the first packed byte
contains the number of characters in
the string; in B, there is no count
and strings are terminated by a
special character, which B spelled
*e. This change was made partially
to avoid the limitation on the length
of a string caused by holding the
count in an 8- or 9-bit slot, and
partly because maintaining the count
seemed, in our experience, less
convenient than using a terminator.
Dennis M Ritchie, Development of the C Language
C doesn't have a string as part of the language. A 'string' in C is just a pointer to char. So maybe you're asking the wrong question.
"What's the rationale for leaving out a string type" might be more relevant. To that I would point out that C is not an object oriented language and only has basic value types. A string is a higher level concept that has to be implemented by in some way combining values of other types. C is at a lower level of abstraction.
in light of the raging squall below:
I just want to point out that I'm not trying to say this is a stupid or bad question, or that the C way of representing strings is the best choice. I'm trying to clarify that the question would be more succinctly put if you take into account the fact that C has no mechanism for differentiating a string as a datatype from a byte array. Is this the best choice in light of the processing and memory power of todays computers? Probably not. But hindsight is always 20/20 and all that :)
The question is asked as a Length Prefixed Strings (LPS) vs zero terminated strings (SZ) thing, but mostly expose benefits of length prefixed strings. That may seem overwhelming, but to be honest we should also consider drawbacks of LPS and advantages of SZ.
As I understand it, the question may even be understood as a biased way to ask "what are the advantages of Zero Terminated Strings ?".
Advantages (I see) of Zero Terminated Strings:
very simple, no need to introduce new concepts in language, char
arrays/char pointers can do.
the core language just include minimal syntaxic sugar to convert
something between double quotes to a
bunch of chars (really a bunch of
bytes). In some cases it can be used
to initialize things completely
unrelated with text. For instance xpm
image file format is a valid C source
that contains image data encoded as a
string.
by the way, you can put a zero in a string literal, the compiler will
just also add another one at the end of the literal: "this\0is\0valid\0C".
Is it a string ? or four strings ? Or a bunch of bytes...
flat implementation, no hidden indirection, no hidden integer.
no hidden memory allocation involved (well, some infamous non
standard functions like strdup
perform allocation, but that's mostly
a source of problem).
no specific issue for small or large hardware (imagine the burden to
manage 32 bits prefix length on 8
bits microcontrollers, or the
restrictions of limiting string size
to less than 256 bytes, that was a problem I actually had with Turbo Pascal eons ago).
implementation of string manipulation is just a handful of
very simple library function
efficient for the main use of strings : constant text read
sequentially from a known start
(mostly messages to the user).
the terminating zero is not even mandatory, all necessary tools
to manipulate chars like a bunch of
bytes are available. When performing
array initialisation in C, you can
even avoid the NUL terminator. Just
set the right size. char a[3] =
"foo"; is valid C (not C++) and
won't put a final zero in a.
coherent with the unix point of view "everything is file", including
"files" that have no intrinsic length
like stdin, stdout. You should remember that open read and write primitives are implemented
at a very low level. They are not library calls, but system calls. And the same API is used
for binary or text files. File reading primitives get a buffer address and a size and return
the new size. And you can use strings as the buffer to write. Using another kind of string
representation would imply you can't easily use a literal string as the buffer to output, or
you would have to make it have a very strange behavior when casting it to char*. Namely
not to return the address of the string, but instead to return the actual data.
very easy to manipulate text data read from a file in-place, without useless copy of buffer,
just insert zeroes at the right places (well, not really with modern C as double quoted strings are const char arrays nowaday usually kept in non modifiable data segment).
prepending some int values of whatever size would implies alignment issues. The initial
length should be aligned, but there is no reason to do that for the characters datas (and
again, forcing alignment of strings would imply problems when treating them as a bunch of
bytes).
length is known at compile time for constant literal strings (sizeof). So why would
anyone want to store it in memory prepending it to actual data ?
in a way C is doing as (nearly) everyone else, strings are viewed as arrays of char. As array length is not managed by C, it is logical length is not managed either for strings. The only surprising thing is that 0 item added at the end, but that's just at core language level when typing a string between double quotes. Users can perfectly call string manipulation functions passing length, or even use plain memcopy instead. SZ are just a facility. In most other languages array length is managed, it's logical that is the same for strings.
in modern times anyway 1 byte character sets are not enough and you often have to deal with encoded unicode strings where the number of characters is very different of the number of bytes. It implies that users will probably want more than "just the size", but also other informations. Keeping length give use nothing (particularly no natural place to store them) regarding these other useful pieces of information.
That said, no need to complain in the rare case where standard C strings are indeed inefficient. Libs are available. If I followed that trend, I should complain that standard C does not include any regex support functions... but really everybody knows it's not a real problem as there is libraries available for that purpose. So when string manipulation efficiency is wanted, why not use a library like bstring ? Or even C++ strings ?
EDIT: I recently had a look to D strings. It is interesting enough to see that the solution choosed is neither a size prefix, nor zero termination. As in C, literal strings enclosed in double quotes are just short hand for immutable char arrays, and the language also has a string keyword meaning that (immutable char array).
But D arrays are much richer than C arrays. In the case of static arrays length is known at run-time so there is no need to store the length. Compiler has it at compile time. In the case of dynamic arrays, length is available but D documentation does not state where it is kept. For all we know, compiler could choose to keep it in some register, or in some variable stored far away from the characters data.
On normal char arrays or non literal strings there is no final zero, hence programmer has to put it itself if he wants to call some C function from D. In the particular case of literal strings, however the D compiler still put a zero at the end of each strings (to allow easy cast to C strings to make easier calling C function ?), but this zero is not part of the string (D does not count it in string size).
The only thing that disappointed me somewhat is that strings are supposed to be utf-8, but length apparently still returns a number of bytes (at least it's true on my compiler gdc) even when using multi-byte chars. It is unclear to me if it's a compiler bug or by purpose. (OK, I probably have found out what happened. To say to D compiler your source use utf-8 you have to put some stupid byte order mark at beginning. I write stupid because I know of not editor doing that, especially for UTF-8 that is supposed to be ASCII compatible).
I think, it has historical reasons and found this in wikipedia:
At the time C (and the languages that
it was derived from) were developed,
memory was extremely limited, so using
only one byte of overhead to store the
length of a string was attractive. The
only popular alternative at that time,
usually called a "Pascal string"
(though also used by early versions of
BASIC), used a leading byte to store
the length of the string. This allows
the string to contain NUL and made
finding the length need only one
memory access (O(1) (constant) time).
But one byte limits the length to 255.
This length limitation was far more
restrictive than the problems with the
C string, so the C string in general
won out.
Calavera is right, but as people don't seem to get his point, I'll provide some code examples.
First, let's consider what C is: a simple language, where all code has a pretty direct translation into machine language. All types fit into registers and on the stack, and it doesn't require an operating system or a big run-time library to run, since it were meant to write these things (a task to which is superbly well-suited, considering there isn't even a likely competitor to this day).
If C had a string type, like int or char, it would be a type which didn't fit in a register or in the stack, and would require memory allocation (with all its supporting infrastructure) to be handled in any way. All of which go against the basic tenets of C.
So, a string in C is:
char s*;
So, let's assume then that this were length-prefixed. Let's write the code to concatenate two strings:
char* concat(char* s1, char* s2)
{
/* What? What is the type of the length of the string? */
int l1 = *(int*) s1;
/* How much? How much must I skip? */
char *s1s = s1 + sizeof(int);
int l2 = *(int*) s2;
char *s2s = s2 + sizeof(int);
int l3 = l1 + l2;
char *s3 = (char*) malloc(l3 + sizeof(int));
char *s3s = s3 + sizeof(int);
memcpy(s3s, s1s, l1);
memcpy(s3s + l1, s2s, l2);
*(int*) s3 = l3;
return s3;
}
Another alternative would be using a struct to define a string:
struct {
int len; /* cannot be left implementation-defined */
char* buf;
}
At this point, all string manipulation would require two allocations to be made, which, in practice, means you'd go through a library to do any handling of it.
The funny thing is... structs like that do exist in C! They are just not used for your day-to-day displaying messages to the user handling.
So, here is the point Calavera is making: there is no string type in C. To do anything with it, you'd have to take a pointer and decode it as a pointer to two different types, and then it becomes very relevant what is the size of a string, and cannot just be left as "implementation defined".
Now, C can handle memory in anyway, and the mem functions in the library (in <string.h>, even!) provide all the tooling you need to handle memory as a pair of pointer and size. The so-called "strings" in C were created for just one purpose: showing messages in the context of writting an operating system intended for text terminals. And, for that, null termination is enough.
Obviously for performance and safety, you'll want to keep the length of a string while you're working with it rather than repeatedly performing strlen or the equivalent on it. However, storing the length in a fixed location just before the string contents is an incredibly bad design. As Jörgen pointed out in the comments on Sanjit's answer, it precludes treating the tail of a string as a string, which for example makes a lot of common operations like path_to_filename or filename_to_extension impossible without allocating new memory (and incurring the possibility of failure and error handling). And then of course there's the issue that nobody can agree how many bytes the string length field should occupy (plenty of bad "Pascal string" languages used 16-bit fields or even 24-bit fields which preclude processing of long strings).
C's design of letting the programmer choose if/where/how to store the length is much more flexible and powerful. But of course the programmer has to be smart. C punishes stupidity with programs that crash, grind to a halt, or give your enemies root.
Lazyness, register frugality and portability considering the assembly gut of any language, especially C which is one step above assembly (thus inheriting a lot of assembly legacy code).
You would agree as a null char would be useless in those ASCII days, it (and probably as good as an EOF control char ).
let's see in pseudo code
function readString(string) // 1 parameter: 1 register or 1 stact entries
pointer=addressOf(string)
while(string[pointer]!=CONTROL_CHAR) do
read(string[pointer])
increment pointer
total 1 register use
case 2
function readString(length,string) // 2 parameters: 2 register used or 2 stack entries
pointer=addressOf(string)
while(length>0) do
read(string[pointer])
increment pointer
decrement length
total 2 register used
That might seem shortsighted at that time, but considering the frugality in code and register ( which were PREMIUM at that time, the time when you know, they use punch card ). Thus being faster ( when processor speed could be counted in kHz), this "Hack" was pretty darn good and portable to register-less processor with ease.
For argument sake I will implement 2 common string operation
stringLength(string)
pointer=addressOf(string)
while(string[pointer]!=CONTROL_CHAR) do
increment pointer
return pointer-addressOf(string)
complexity O(n) where in most case PASCAL string is O(1) because the length of the string is pre-pended to the string structure (that would also mean that this operation would have to be carried in an earlier stage).
concatString(string1,string2)
length1=stringLength(string1)
length2=stringLength(string2)
string3=allocate(string1+string2)
pointer1=addressOf(string1)
pointer3=addressOf(string3)
while(string1[pointer1]!=CONTROL_CHAR) do
string3[pointer3]=string1[pointer1]
increment pointer3
increment pointer1
pointer2=addressOf(string2)
while(string2[pointer2]!=CONTROL_CHAR) do
string3[pointer3]=string2[pointer2]
increment pointer3
increment pointer1
return string3
complexity O(n) and prepending the string length wouldn't change the complexity of the operation, while I admit it would take 3 time less time.
On another hand, if you use PASCAL string you would have to redesign your API for taking in account register length and bit-endianness, PASCAL string got the well known limitation of 255 char (0xFF) beacause the length was stored in 1 byte (8bits), and it you wanted a longer string (16bits->anything) you would have to take in account the architecture in one layer of your code, that would mean in most case incompatible string APIs if you wanted longer string.
Example:
One file was written with your prepended string api on an 8 bit computer and then would have to be read on say a 32 bit computer, what would the lazy program do considers that your 4bytes are the length of the string then allocate that lot of memory then attempt to read that many bytes.
Another case would be PPC 32 byte string read(little endian) onto a x86 (big endian), of course if you don't know that one is written by the other there would be trouble.
1 byte length (0x00000001) would become 16777216 (0x0100000) that is 16 MB for reading a 1 byte string.
Of course you would say that people should agree on one standard but even 16bit unicode got little and big endianness.
Of course C would have its issues too but, would be very little affected by the issues raised here.
In many ways, C was primitive. And I loved it.
It was a step above assembly language, giving you nearly the same performance with a language that was much easier to write and maintain.
The null terminator is simple and requires no special support by the language.
Looking back, it doesn't seem that convenient. But I used assembly language back in the 80s and it seemed very convenient at the time. I just think software is continually evolving, and the platforms and tools continually get more and more sophisticated.
Assuming for a moment that C implemented strings the Pascal way, by prefixing them by length: is a 7 char long string the same DATA TYPE as a 3-char string? If the answer is yes, then what kind of code should the compiler generate when I assign the former to the latter? Should the string be truncated, or automatically resized? If resized, should that operation be protected by a lock as to make it thread safe? The C approach side stepped all these issues, like it or not :)
Somehow I understood the question to imply there's no compiler support for length-prefixed strings in C. The following example shows, at least you can start your own C string library, where string lengths are counted at compile time, with a construct like this:
#define PREFIX_STR(s) ((prefix_str_t){ sizeof(s)-1, (s) })
typedef struct { int n; char * p; } prefix_str_t;
int main() {
prefix_str_t string1, string2;
string1 = PREFIX_STR("Hello!");
string2 = PREFIX_STR("Allows \0 chars (even if printf directly doesn't)");
printf("%d %s\n", string1.n, string1.p); /* prints: "6 Hello!" */
printf("%d %s\n", string2.n, string2.p); /* prints: "48 Allows " */
return 0;
}
This won't, however, come with no issues as you need to be careful when to specifically free that string pointer and when it is statically allocated (literal char array).
Edit: As a more direct answer to the question, my view is this was the way C could support both having string length available (as a compile time constant), should you need it, but still with no memory overhead if you want to use only pointers and zero termination.
Of course it seems like working with zero-terminated strings was the recommended practice, since the standard library in general doesn't take string lengths as arguments, and since extracting the length isn't as straightforward code as char * s = "abc", as my example shows.
"Even on a 32 bit machine, if you allow the string to be the size of available memory, a length prefixed string is only three bytes wider than a null terminated string."
First, extra 3 bytes may be considerable overhead for short strings. In particular, a zero-length string now takes 4 times as much memory. Some of us are using 64-bit machines, so we either need 8 bytes to store a zero-length string, or the string format can't cope with the longest strings the platform supports.
There may also be alignment issues to deal with. Suppose I have a block of memory containing 7 strings, like "solo\0second\0\0four\0five\0\0seventh". The second string starts at offset 5. The hardware may require that 32-bit integers be aligned at an address that is a multiple of 4, so you have to add padding, increasing the overhead even further. The C representation is very memory-efficient in comparison. (Memory-efficiency is good; it helps cache performance, for example.)
One point not yet mentioned: when C was designed, there were many machines where a 'char' was not eight bits (even today there are DSP platforms where it isn't). If one decides that strings are to be length-prefixed, how many 'char's worth of length prefix should one use? Using two would impose an artificial limit on string length for machines with 8-bit char and 32-bit addressing space, while wasting space on machines with 16-bit char and 16-bit addressing space.
If one wanted to allow arbitrary-length strings to be stored efficiently, and if 'char' were always 8-bits, one could--for some expense in speed and code size--define a scheme were a string prefixed by an even number N would be N/2 bytes long, a string prefixed by an odd value N and an even value M (reading backward) could be ((N-1) + M*char_max)/2, etc. and require that any buffer which claims to offer a certain amount of space to hold a string must allow enough bytes preceding that space to handle the maximum length. The fact that 'char' isn't always 8 bits, however, would complicate such a scheme, since the number of 'char' required to hold a string's length would vary depending upon the CPU architecture.
The null termination allows for fast pointer based operations.
Not a Rationale necessarily but a counterpoint to length-encoded
Certain forms of dynamic length encoding are superior to static length encoding as far as memory is concerned, it all depends on usage. Just look at UTF-8 for proof. It's essentially an extensible character array for encoding a single character. This uses a single bit for each extended byte. NUL termination uses 8 bits. Length-prefix I think can be reasonably termed infinite length as well by using 64 bits. How often you hit the case of your extra bits is the deciding factor. Only 1 extremely large string? Who cares if you're using 8 or 64 bits? Many small strings (Ie Strings of English words)? Then your prefix costs are a large percentage.
Length-prefixed strings allowing time savings is not a real thing. Whether your supplied data is required to have length provided, you're counting at compile time, or you're truly being provided dynamic data that you must encode as a string. These sizes are computed at some point in the algorithm. A separate variable to store the size of a null terminated string can be provided. Which makes the comparison on time-savings moot. One just has an extra NUL at the end... but if the length encode doesn't include that NUL then there's literally no difference between the two. There's no algorithmic change required at all. Just a pre-pass you have to manually design yourself instead of having a compiler/runtime do it for you. C is mostly about doing things manually.
Length-prefix being optional is a selling point. I don't always need that extra info for an algorithm so being required to do it for a every string makes my precompute+compute time never able to drop below O(n). (Ie hardware random number generator 1-128. I can pull from an "infinite string". Let's say it only generates characters so fast. So our string length changes all the time. But my usage of the data probably doesn't care how many random bytes I have. It just wants the next available unused byte as soon as it can get it after a request. I could be waiting on the device. But I could also have a buffer of characters pre-read. A length comparison is a needless waste of computation. A null check is more efficient.)
Length-prefix is a good guard against buffer overflow? So is sane usage of library functions and implementation. What if I pass in malformed data? My buffer is 2 bytes long but I tell the function it's 7! Ex: If gets() was intended to be used on known data it could've had an internal buffer check that tested compiled buffers and malloc() calls and still follow spec. If it was meant to be used as a pipe for unknown STDIN to arrive at unknown buffer then clearly one can't know abut the buffer size which means a length arg is pointless, you need something else here like a canary check. For that matter, you can't length-prefix some streams and inputs, you just can't. Which means the length check has to be built into the algorithm and not a magic part of the typing system. TL;DR NUL-terminated never had to be unsafe, it just ended up that way via misuse.
counter-counter point: NUL-termination is annoying on binary. You either need to do length-prefix here or transform NUL bytes in some way: escape-codes, range remapping, etc... which of course means more-memory-usage/reduced-information/more-operations-per-byte. Length-prefix mostly wins the war here. The only upside to a transform is that no additional functions have to be written to cover the length-prefix strings. Which means on your more optimized sub-O(n) routines you can have them automatically act as their O(n) equivalents without adding more code. Downside is, of course, time/memory/compression waste when used on NUL heavy strings. Depending on how much of your library you end up duplicating to operate on binary data, it may make sense to work solely with length-prefix strings. That said one could also do the same with length-prefix strings... -1 length could mean NUL-terminated and you could use NUL-terminated strings inside length-terminated.
Concat: "O(n+m) vs O(m)" I'm assuming your referring to m as the total length of the string after concatenating because they both have to have that number of operations minimum (you can't just tack-on to string 1, what if you have to realloc?). And I'm assuming n is a mythical amount of operations you no longer have to do because of a pre-compute. If so, then the answer is simple: pre-compute. If you're insisting you'll always have enough memory to not need to realloc and that's the basis of the big-O notation then the answer is even more simple: do binary search on allocated memory for end of string 1, clearly there's a large swatch of infinite zeros after string 1 for us to not worry about realloc. There, easily got n to log(n) and I barely tried. Which if you recall log(n) is essentially only ever as large as 64 on a real computer, which is essentially like saying O(64+m), which is essentially O(m). (And yes that logic has been used in run-time analysis of real data structures in-use today. It's not bullshit off the top of my head.)
Concat()/Len() again: Memoize results. Easy. Turns all computes into pre-computes if possible/necessary. This is an algorithmic decision. It's not an enforced constraint of the language.
String suffix passing is easier/possible with NUL termination. Depending on how length-prefix is implemented it can be destructive on original string and can sometimes not even be possible. Requiring a copy and pass O(n) instead of O(1).
Argument-passing/de-referencing is less for NUL-terminated versus length-prefix. Obviously because you're passing less information. If you don't need length, then this saves a lot of footprint and allows optimizations.
You can cheat. It's really just a pointer. Who says you have to read it as a string? What if you want to read it as a single character or a float? What if you want to do the opposite and read a float as a string? If you're careful you can do this with NUL-termination. You can't do this with length-prefix, it's a data type distinctly different from a pointer typically. You'd most likely have to build a string byte-by-byte and get the length. Of course if you wanted something like an entire float (probably has a NUL inside it) you'd have to read byte-by-byte anyway, but the details are left to you to decide.
TL;DR Are you using binary data? If no, then NUL-termination allows more algorithmic freedom. If yes, then code quantity vs speed/memory/compression is your main concern. A blend of the two approaches or memoization might be best.
Many design decisions surrounding C stem from the fact that when it was originally implemented, parameter passing was somewhat expensive. Given a choice between e.g.
void add_element_to_next(arr, offset)
char[] arr;
int offset;
{
arr[offset] += arr[offset+1];
}
char array[40];
void test()
{
for (i=0; i<39; i++)
add_element_to_next(array, i);
}
versus
void add_element_to_next(ptr)
char *p;
{
p[0]+=p[1];
}
char array[40];
void test()
{
int i;
for (i=0; i<39; i++)
add_element_to_next(arr+i);
}
the latter would have been slightly cheaper (and thus preferred) since it only required passing one parameter rather than two. If the method being called didn't need to know the base address of the array nor the index within it, passing a single pointer combining the two would be cheaper than passing the values separately.
While there are many reasonable ways in which C could have encoded string lengths, the approaches that had been invented up to that time would have all required functions that should be able to work with part of a string to accept the base address of the string and the desired index as two separate parameters. Using zero-byte termination made it possible to avoid that requirement. Although other approaches would be better with today's machines (modern compilers often pass parameters in registers, and memcpy can be optimized in ways strcpy()-equivalents cannot) enough production code uses zero-byte terminated strings that it's hard to change to anything else.
PS--In exchange for a slight speed penalty on some operations, and a tiny bit of extra overhead on longer strings, it would have been possible to have methods that work with strings accept pointers directly to strings, bounds-checked string buffers, or data structures identifying substrings of another string. A function like "strcat" would have looked something like [modern syntax]
void strcat(unsigned char *dest, unsigned char *src)
{
struct STRING_INFO d,s;
str_size_t copy_length;
get_string_info(&d, dest);
get_string_info(&s, src);
if (d.si_buff_size > d.si_length) // Destination is resizable buffer
{
copy_length = d.si_buff_size - d.si_length;
if (s.src_length < copy_length)
copy_length = s.src_length;
memcpy(d.buff + d.si_length, s.buff, copy_length);
d.si_length += copy_length;
update_string_length(&d);
}
}
A little bigger than the K&R strcat method, but it would support bounds-checking, which the K&R method doesn't. Further, unlike the current method, it would be possible to easily concatenate an arbitrary substring, e.g.
/* Concatenate 10th through 24th characters from src to dest */
void catpart(unsigned char *dest, unsigned char *src)
{
struct SUBSTRING_INFO *inf;
src = temp_substring(&inf, src, 10, 24);
strcat(dest, src);
}
Note that the lifetime of the string returned by temp_substring would be limited by those of s and src, which ever was shorter (which is why the method requires inf to be passed in--if it was local, it would die when the method returned).
In terms of memory cost, strings and buffers up to 64 bytes would have one byte of overhead (same as zero-terminated strings); longer strings would have slightly more (whether one allowed amounts of overhead between two bytes and the maximum required would be a time/space tradeoff). A special value of the length/mode byte would be used to indicate that a string function was given a structure containing a flag byte, a pointer, and a buffer length (which could then index arbitrarily into any other string).
Of course, K&R didn't implement any such thing, but that's most likely because they didn't want to spend much effort on string handling--an area where even today many languages seem rather anemic.
According to Joel Spolsky in this blog post,
It's because the PDP-7 microprocessor, on which UNIX and the C programming language were invented, had an ASCIZ string type. ASCIZ meant "ASCII with a Z (zero) at the end."
After seeing all the other answers here, I'm convinced that even if this is true, it's only part of the reason for C having null-terminated "strings". That post is quite illuminating as to how simple things like strings can actually be quite hard.
I don't buy the "C has no string" answer. True, C does not support built-in higher-level types but you can still represent data-structures in C and that's what a string is. The fact a string is just a pointer in C does not mean the first N bytes cannot take on special meaning as a the length.
Windows/COM developers will be very familiar with the BSTR type which is exactly like this - a length-prefixed C string where the actual character data starts not at byte 0.
So it seems that the decision to use null-termination is simply what people preferred, not a necessity of the language.
One advantage of NUL-termination over length-prefixing, which I have not seen anyone mention, is the simplicity of string comparison. Consider the comparison standard which returns a signed result for less-than, equal, or greater-than. For length-prefixing the algorithm has to be something along the following lines:
Compare the two lengths; record the smaller, and note if they are equal (this last step might be deferred to step 3).
Scan the two character sequences, subtracting characters at matching indices (or use a dual pointer scan). Stop either when the difference is nonzero, returning the difference, or when the number of characters scanned is equal to the smaller length.
When the smaller length is reached, one string is a prefix of the other. Return negative or positive value according to which is shorter, or zero if of equal length.
Contrast this with the NUL-termination algorithm:
Scan the two character sequences, subtracting characters at matching indices [note that this is handled better with moving pointers]. Stop when the difference is nonzero, returning the difference. NOTE: If one string is a PROPER prefix of the other, one of the characters in the subtraction will be NUL, i.e zero, and the comparison will naturally stop there.
If the difference is zero, -only then- check if either character is NUL. If so, return zero, otherwise continue to next character.
The NUL-terminated case is simpler, and very easy to implement efficiently with a dual pointer scan. The length-prefixed case does at least as much work, nearly always more. If your algorithm has to do a lot of string comparisons [e.g a compiler!], the NUL-terminated case wins out. Nowadays that might not be as important, but back in the day, heck yeah.
gcc accept the codes below:
char s[4] = "abcd";
and it's ok if we treat is as an array of chars but not string. That is, we can access it with s[0], s[1], s[2], and s[3], or even with memcpy(dest, s, 4). But we'll get messy characters when we trying with puts(s), or worse with strcpy(dest, s).
I think the better question is why you think C owes you anything? C was designed to give you what you need, nothing more. You need to loose the mentality that the language must provide you with everything. Or just continue to use your higher level languages that will give you the luxary of String, Calendar, Containers; and in the case of Java you get one thing in tonnes of variety. Multiple types String, multiple types of unordered_map(s).
Too bad for you, this was not the purpose of C. C was not designed to be a bloated language that offers from a pin to an anchor. Instead you must rely on third party libraries or your own. And there is nothing easier than creating a simple struct that will contain a string and its size.
struct String
{
const char *s;
size_t len;
};
You know what the problem is with this though. It is not standard. Another language might decide to organize the len before the string. Another language might decide to use a pointer to end instead. Another might decide to use six pointers to make the String more efficient. However a null terminated string is the most standard format for a string; which you can use to interface with any language. Even Java JNI uses null terminated strings.
Lastly, it is a common saying; the right data structure for the task. If you find that need to know the size of a string more than anything else; well use a string structure that allows you to do that optimally. But don't make claims that that operation is used more than anything else for everybody. Like, why is knowing the size of a string more important than reading its contents. I find that reading the contents of a string is what I mostly do, so I use null terminated strings instead of std::string; which saves me 5 pointers on a GCC compiler. If I can even save 2 pointers that is good.

Understanding and writing wchar_t in C

I'm currently rewriting (a part of) the printf() function for a school project.
Overall, we were required to reproduce the behaviour of the function with several flags, conversions, length modifiers ...
The only thing I have left to do and that gets me stuck are the flags %C / %S (or %lc / %ls).
So far, I've gathered that wchar_t is a type that can store characters on more than one byte, in order to accept more characters or symbols and therefore be compatible with pretty much every language, regardless of their alphabet and special characters.
However, I wasn't able to find any concrete information on what a wchar looks like for the machine, it's actual length (which apparently vary based on several factors including the compiler, the OS ...) or how to actually write them.
Thank you in advance
Note that we are limited in the functions we are allowed to use. The only allowed functions are write(), malloc(), free(), and exit().
We must be able to code any other required function ourselves.
To sum this up, what I'm asking here is some informations on how to interpret and write "manually" any wchar_t character, with as little code as possible so that I can try to understand the whole process and code it myself.
A wchar_t is similar to a char in the sense that it is a number, but when displaying a char or wchar_t we don't want to see the number, but the drawn character corresponding to the number. The mapping from the number to the characters aren't defined by neither char nor wchar_t, they depend on the system. So there is no difference in the end usage between char and wchar_t except for their sizes.
Given the above, the most trivial implementation of printf("%ls") is one where you know what are the system encodings for use with char and wchar_t. For example, in my system, char has 8 bits, has encoding UTF-8, while wchar_t is 32 bits and has encoding UTF-32. So the printf implementation just converts from UTF-32 to UTF-8 and outputs the result.
A more general implementation must support different and configurable encodings and may need to inspect what's the current encoding. In this case functions like wcsnrtombs() or iconv() must be used.

Partially Prefixed Null Terminated Strings [duplicate]

As much as I love C and C++, I can't help but scratch my head at the choice of null terminated strings:
Length prefixed (i.e. Pascal) strings existed before C
Length prefixed strings make several algorithms faster by allowing constant time length lookup.
Length prefixed strings make it more difficult to cause buffer overrun errors.
Even on a 32 bit machine, if you allow the string to be the size of available memory, a length prefixed string is only three bytes wider than a null terminated string. On 16 bit machines this is a single byte. On 64 bit machines, 4GB is a reasonable string length limit, but even if you want to expand it to the size of the machine word, 64 bit machines usually have ample memory making the extra seven bytes sort of a null argument. I know the original C standard was written for insanely poor machines (in terms of memory), but the efficiency argument doesn't sell me here.
Pretty much every other language (i.e. Perl, Pascal, Python, Java, C#, etc) use length prefixed strings. These languages usually beat C in string manipulation benchmarks because they are more efficient with strings.
C++ rectified this a bit with the std::basic_string template, but plain character arrays expecting null terminated strings are still pervasive. This is also imperfect because it requires heap allocation.
Null terminated strings have to reserve a character (namely, null), which cannot exist in the string, while length prefixed strings can contain embedded nulls.
Several of these things have come to light more recently than C, so it would make sense for C to not have known of them. However, several were plain well before C came to be. Why would null terminated strings have been chosen instead of the obviously superior length prefixing?
EDIT: Since some asked for facts (and didn't like the ones I already provided) on my efficiency point above, they stem from a few things:
Concat using null terminated strings requires O(n + m) time complexity. Length prefixing often require only O(m).
Length using null terminated strings requires O(n) time complexity. Length prefixing is O(1).
Length and concat are by far the most common string operations. There are several cases where null terminated strings can be more efficient, but these occur much less often.
From answers below, these are some cases where null terminated strings are more efficient:
When you need to cut off the start of a string and need to pass it to some method. You can't really do this in constant time with length prefixing even if you are allowed to destroy the original string, because the length prefix probably needs to follow alignment rules.
In some cases where you're just looping through the string character by character you might be able to save a CPU register. Note that this works only in the case that you haven't dynamically allocated the string (Because then you'd have to free it, necessitating using that CPU register you saved to hold the pointer you originally got from malloc and friends).
None of the above are nearly as common as length and concat.
There's one more asserted in the answers below:
You need to cut off the end of the string
but this one is incorrect -- it's the same amount of time for null terminated and length prefixed strings. (Null terminated strings just stick a null where you want the new end to be, length prefixers just subtract from the prefix.)
From the horse's mouth
None of BCPL, B, or C supports
character data strongly in the
language; each treats strings much
like vectors of integers and
supplements general rules by a few
conventions. In both BCPL and B a
string literal denotes the address of
a static area initialized with the
characters of the string, packed into
cells. In BCPL, the first packed byte
contains the number of characters in
the string; in B, there is no count
and strings are terminated by a
special character, which B spelled
*e. This change was made partially
to avoid the limitation on the length
of a string caused by holding the
count in an 8- or 9-bit slot, and
partly because maintaining the count
seemed, in our experience, less
convenient than using a terminator.
Dennis M Ritchie, Development of the C Language
C doesn't have a string as part of the language. A 'string' in C is just a pointer to char. So maybe you're asking the wrong question.
"What's the rationale for leaving out a string type" might be more relevant. To that I would point out that C is not an object oriented language and only has basic value types. A string is a higher level concept that has to be implemented by in some way combining values of other types. C is at a lower level of abstraction.
in light of the raging squall below:
I just want to point out that I'm not trying to say this is a stupid or bad question, or that the C way of representing strings is the best choice. I'm trying to clarify that the question would be more succinctly put if you take into account the fact that C has no mechanism for differentiating a string as a datatype from a byte array. Is this the best choice in light of the processing and memory power of todays computers? Probably not. But hindsight is always 20/20 and all that :)
The question is asked as a Length Prefixed Strings (LPS) vs zero terminated strings (SZ) thing, but mostly expose benefits of length prefixed strings. That may seem overwhelming, but to be honest we should also consider drawbacks of LPS and advantages of SZ.
As I understand it, the question may even be understood as a biased way to ask "what are the advantages of Zero Terminated Strings ?".
Advantages (I see) of Zero Terminated Strings:
very simple, no need to introduce new concepts in language, char
arrays/char pointers can do.
the core language just include minimal syntaxic sugar to convert
something between double quotes to a
bunch of chars (really a bunch of
bytes). In some cases it can be used
to initialize things completely
unrelated with text. For instance xpm
image file format is a valid C source
that contains image data encoded as a
string.
by the way, you can put a zero in a string literal, the compiler will
just also add another one at the end of the literal: "this\0is\0valid\0C".
Is it a string ? or four strings ? Or a bunch of bytes...
flat implementation, no hidden indirection, no hidden integer.
no hidden memory allocation involved (well, some infamous non
standard functions like strdup
perform allocation, but that's mostly
a source of problem).
no specific issue for small or large hardware (imagine the burden to
manage 32 bits prefix length on 8
bits microcontrollers, or the
restrictions of limiting string size
to less than 256 bytes, that was a problem I actually had with Turbo Pascal eons ago).
implementation of string manipulation is just a handful of
very simple library function
efficient for the main use of strings : constant text read
sequentially from a known start
(mostly messages to the user).
the terminating zero is not even mandatory, all necessary tools
to manipulate chars like a bunch of
bytes are available. When performing
array initialisation in C, you can
even avoid the NUL terminator. Just
set the right size. char a[3] =
"foo"; is valid C (not C++) and
won't put a final zero in a.
coherent with the unix point of view "everything is file", including
"files" that have no intrinsic length
like stdin, stdout. You should remember that open read and write primitives are implemented
at a very low level. They are not library calls, but system calls. And the same API is used
for binary or text files. File reading primitives get a buffer address and a size and return
the new size. And you can use strings as the buffer to write. Using another kind of string
representation would imply you can't easily use a literal string as the buffer to output, or
you would have to make it have a very strange behavior when casting it to char*. Namely
not to return the address of the string, but instead to return the actual data.
very easy to manipulate text data read from a file in-place, without useless copy of buffer,
just insert zeroes at the right places (well, not really with modern C as double quoted strings are const char arrays nowaday usually kept in non modifiable data segment).
prepending some int values of whatever size would implies alignment issues. The initial
length should be aligned, but there is no reason to do that for the characters datas (and
again, forcing alignment of strings would imply problems when treating them as a bunch of
bytes).
length is known at compile time for constant literal strings (sizeof). So why would
anyone want to store it in memory prepending it to actual data ?
in a way C is doing as (nearly) everyone else, strings are viewed as arrays of char. As array length is not managed by C, it is logical length is not managed either for strings. The only surprising thing is that 0 item added at the end, but that's just at core language level when typing a string between double quotes. Users can perfectly call string manipulation functions passing length, or even use plain memcopy instead. SZ are just a facility. In most other languages array length is managed, it's logical that is the same for strings.
in modern times anyway 1 byte character sets are not enough and you often have to deal with encoded unicode strings where the number of characters is very different of the number of bytes. It implies that users will probably want more than "just the size", but also other informations. Keeping length give use nothing (particularly no natural place to store them) regarding these other useful pieces of information.
That said, no need to complain in the rare case where standard C strings are indeed inefficient. Libs are available. If I followed that trend, I should complain that standard C does not include any regex support functions... but really everybody knows it's not a real problem as there is libraries available for that purpose. So when string manipulation efficiency is wanted, why not use a library like bstring ? Or even C++ strings ?
EDIT: I recently had a look to D strings. It is interesting enough to see that the solution choosed is neither a size prefix, nor zero termination. As in C, literal strings enclosed in double quotes are just short hand for immutable char arrays, and the language also has a string keyword meaning that (immutable char array).
But D arrays are much richer than C arrays. In the case of static arrays length is known at run-time so there is no need to store the length. Compiler has it at compile time. In the case of dynamic arrays, length is available but D documentation does not state where it is kept. For all we know, compiler could choose to keep it in some register, or in some variable stored far away from the characters data.
On normal char arrays or non literal strings there is no final zero, hence programmer has to put it itself if he wants to call some C function from D. In the particular case of literal strings, however the D compiler still put a zero at the end of each strings (to allow easy cast to C strings to make easier calling C function ?), but this zero is not part of the string (D does not count it in string size).
The only thing that disappointed me somewhat is that strings are supposed to be utf-8, but length apparently still returns a number of bytes (at least it's true on my compiler gdc) even when using multi-byte chars. It is unclear to me if it's a compiler bug or by purpose. (OK, I probably have found out what happened. To say to D compiler your source use utf-8 you have to put some stupid byte order mark at beginning. I write stupid because I know of not editor doing that, especially for UTF-8 that is supposed to be ASCII compatible).
I think, it has historical reasons and found this in wikipedia:
At the time C (and the languages that
it was derived from) were developed,
memory was extremely limited, so using
only one byte of overhead to store the
length of a string was attractive. The
only popular alternative at that time,
usually called a "Pascal string"
(though also used by early versions of
BASIC), used a leading byte to store
the length of the string. This allows
the string to contain NUL and made
finding the length need only one
memory access (O(1) (constant) time).
But one byte limits the length to 255.
This length limitation was far more
restrictive than the problems with the
C string, so the C string in general
won out.
Calavera is right, but as people don't seem to get his point, I'll provide some code examples.
First, let's consider what C is: a simple language, where all code has a pretty direct translation into machine language. All types fit into registers and on the stack, and it doesn't require an operating system or a big run-time library to run, since it were meant to write these things (a task to which is superbly well-suited, considering there isn't even a likely competitor to this day).
If C had a string type, like int or char, it would be a type which didn't fit in a register or in the stack, and would require memory allocation (with all its supporting infrastructure) to be handled in any way. All of which go against the basic tenets of C.
So, a string in C is:
char s*;
So, let's assume then that this were length-prefixed. Let's write the code to concatenate two strings:
char* concat(char* s1, char* s2)
{
/* What? What is the type of the length of the string? */
int l1 = *(int*) s1;
/* How much? How much must I skip? */
char *s1s = s1 + sizeof(int);
int l2 = *(int*) s2;
char *s2s = s2 + sizeof(int);
int l3 = l1 + l2;
char *s3 = (char*) malloc(l3 + sizeof(int));
char *s3s = s3 + sizeof(int);
memcpy(s3s, s1s, l1);
memcpy(s3s + l1, s2s, l2);
*(int*) s3 = l3;
return s3;
}
Another alternative would be using a struct to define a string:
struct {
int len; /* cannot be left implementation-defined */
char* buf;
}
At this point, all string manipulation would require two allocations to be made, which, in practice, means you'd go through a library to do any handling of it.
The funny thing is... structs like that do exist in C! They are just not used for your day-to-day displaying messages to the user handling.
So, here is the point Calavera is making: there is no string type in C. To do anything with it, you'd have to take a pointer and decode it as a pointer to two different types, and then it becomes very relevant what is the size of a string, and cannot just be left as "implementation defined".
Now, C can handle memory in anyway, and the mem functions in the library (in <string.h>, even!) provide all the tooling you need to handle memory as a pair of pointer and size. The so-called "strings" in C were created for just one purpose: showing messages in the context of writting an operating system intended for text terminals. And, for that, null termination is enough.
Obviously for performance and safety, you'll want to keep the length of a string while you're working with it rather than repeatedly performing strlen or the equivalent on it. However, storing the length in a fixed location just before the string contents is an incredibly bad design. As Jörgen pointed out in the comments on Sanjit's answer, it precludes treating the tail of a string as a string, which for example makes a lot of common operations like path_to_filename or filename_to_extension impossible without allocating new memory (and incurring the possibility of failure and error handling). And then of course there's the issue that nobody can agree how many bytes the string length field should occupy (plenty of bad "Pascal string" languages used 16-bit fields or even 24-bit fields which preclude processing of long strings).
C's design of letting the programmer choose if/where/how to store the length is much more flexible and powerful. But of course the programmer has to be smart. C punishes stupidity with programs that crash, grind to a halt, or give your enemies root.
Lazyness, register frugality and portability considering the assembly gut of any language, especially C which is one step above assembly (thus inheriting a lot of assembly legacy code).
You would agree as a null char would be useless in those ASCII days, it (and probably as good as an EOF control char ).
let's see in pseudo code
function readString(string) // 1 parameter: 1 register or 1 stact entries
pointer=addressOf(string)
while(string[pointer]!=CONTROL_CHAR) do
read(string[pointer])
increment pointer
total 1 register use
case 2
function readString(length,string) // 2 parameters: 2 register used or 2 stack entries
pointer=addressOf(string)
while(length>0) do
read(string[pointer])
increment pointer
decrement length
total 2 register used
That might seem shortsighted at that time, but considering the frugality in code and register ( which were PREMIUM at that time, the time when you know, they use punch card ). Thus being faster ( when processor speed could be counted in kHz), this "Hack" was pretty darn good and portable to register-less processor with ease.
For argument sake I will implement 2 common string operation
stringLength(string)
pointer=addressOf(string)
while(string[pointer]!=CONTROL_CHAR) do
increment pointer
return pointer-addressOf(string)
complexity O(n) where in most case PASCAL string is O(1) because the length of the string is pre-pended to the string structure (that would also mean that this operation would have to be carried in an earlier stage).
concatString(string1,string2)
length1=stringLength(string1)
length2=stringLength(string2)
string3=allocate(string1+string2)
pointer1=addressOf(string1)
pointer3=addressOf(string3)
while(string1[pointer1]!=CONTROL_CHAR) do
string3[pointer3]=string1[pointer1]
increment pointer3
increment pointer1
pointer2=addressOf(string2)
while(string2[pointer2]!=CONTROL_CHAR) do
string3[pointer3]=string2[pointer2]
increment pointer3
increment pointer1
return string3
complexity O(n) and prepending the string length wouldn't change the complexity of the operation, while I admit it would take 3 time less time.
On another hand, if you use PASCAL string you would have to redesign your API for taking in account register length and bit-endianness, PASCAL string got the well known limitation of 255 char (0xFF) beacause the length was stored in 1 byte (8bits), and it you wanted a longer string (16bits->anything) you would have to take in account the architecture in one layer of your code, that would mean in most case incompatible string APIs if you wanted longer string.
Example:
One file was written with your prepended string api on an 8 bit computer and then would have to be read on say a 32 bit computer, what would the lazy program do considers that your 4bytes are the length of the string then allocate that lot of memory then attempt to read that many bytes.
Another case would be PPC 32 byte string read(little endian) onto a x86 (big endian), of course if you don't know that one is written by the other there would be trouble.
1 byte length (0x00000001) would become 16777216 (0x0100000) that is 16 MB for reading a 1 byte string.
Of course you would say that people should agree on one standard but even 16bit unicode got little and big endianness.
Of course C would have its issues too but, would be very little affected by the issues raised here.
In many ways, C was primitive. And I loved it.
It was a step above assembly language, giving you nearly the same performance with a language that was much easier to write and maintain.
The null terminator is simple and requires no special support by the language.
Looking back, it doesn't seem that convenient. But I used assembly language back in the 80s and it seemed very convenient at the time. I just think software is continually evolving, and the platforms and tools continually get more and more sophisticated.
Assuming for a moment that C implemented strings the Pascal way, by prefixing them by length: is a 7 char long string the same DATA TYPE as a 3-char string? If the answer is yes, then what kind of code should the compiler generate when I assign the former to the latter? Should the string be truncated, or automatically resized? If resized, should that operation be protected by a lock as to make it thread safe? The C approach side stepped all these issues, like it or not :)
Somehow I understood the question to imply there's no compiler support for length-prefixed strings in C. The following example shows, at least you can start your own C string library, where string lengths are counted at compile time, with a construct like this:
#define PREFIX_STR(s) ((prefix_str_t){ sizeof(s)-1, (s) })
typedef struct { int n; char * p; } prefix_str_t;
int main() {
prefix_str_t string1, string2;
string1 = PREFIX_STR("Hello!");
string2 = PREFIX_STR("Allows \0 chars (even if printf directly doesn't)");
printf("%d %s\n", string1.n, string1.p); /* prints: "6 Hello!" */
printf("%d %s\n", string2.n, string2.p); /* prints: "48 Allows " */
return 0;
}
This won't, however, come with no issues as you need to be careful when to specifically free that string pointer and when it is statically allocated (literal char array).
Edit: As a more direct answer to the question, my view is this was the way C could support both having string length available (as a compile time constant), should you need it, but still with no memory overhead if you want to use only pointers and zero termination.
Of course it seems like working with zero-terminated strings was the recommended practice, since the standard library in general doesn't take string lengths as arguments, and since extracting the length isn't as straightforward code as char * s = "abc", as my example shows.
"Even on a 32 bit machine, if you allow the string to be the size of available memory, a length prefixed string is only three bytes wider than a null terminated string."
First, extra 3 bytes may be considerable overhead for short strings. In particular, a zero-length string now takes 4 times as much memory. Some of us are using 64-bit machines, so we either need 8 bytes to store a zero-length string, or the string format can't cope with the longest strings the platform supports.
There may also be alignment issues to deal with. Suppose I have a block of memory containing 7 strings, like "solo\0second\0\0four\0five\0\0seventh". The second string starts at offset 5. The hardware may require that 32-bit integers be aligned at an address that is a multiple of 4, so you have to add padding, increasing the overhead even further. The C representation is very memory-efficient in comparison. (Memory-efficiency is good; it helps cache performance, for example.)
One point not yet mentioned: when C was designed, there were many machines where a 'char' was not eight bits (even today there are DSP platforms where it isn't). If one decides that strings are to be length-prefixed, how many 'char's worth of length prefix should one use? Using two would impose an artificial limit on string length for machines with 8-bit char and 32-bit addressing space, while wasting space on machines with 16-bit char and 16-bit addressing space.
If one wanted to allow arbitrary-length strings to be stored efficiently, and if 'char' were always 8-bits, one could--for some expense in speed and code size--define a scheme were a string prefixed by an even number N would be N/2 bytes long, a string prefixed by an odd value N and an even value M (reading backward) could be ((N-1) + M*char_max)/2, etc. and require that any buffer which claims to offer a certain amount of space to hold a string must allow enough bytes preceding that space to handle the maximum length. The fact that 'char' isn't always 8 bits, however, would complicate such a scheme, since the number of 'char' required to hold a string's length would vary depending upon the CPU architecture.
The null termination allows for fast pointer based operations.
Not a Rationale necessarily but a counterpoint to length-encoded
Certain forms of dynamic length encoding are superior to static length encoding as far as memory is concerned, it all depends on usage. Just look at UTF-8 for proof. It's essentially an extensible character array for encoding a single character. This uses a single bit for each extended byte. NUL termination uses 8 bits. Length-prefix I think can be reasonably termed infinite length as well by using 64 bits. How often you hit the case of your extra bits is the deciding factor. Only 1 extremely large string? Who cares if you're using 8 or 64 bits? Many small strings (Ie Strings of English words)? Then your prefix costs are a large percentage.
Length-prefixed strings allowing time savings is not a real thing. Whether your supplied data is required to have length provided, you're counting at compile time, or you're truly being provided dynamic data that you must encode as a string. These sizes are computed at some point in the algorithm. A separate variable to store the size of a null terminated string can be provided. Which makes the comparison on time-savings moot. One just has an extra NUL at the end... but if the length encode doesn't include that NUL then there's literally no difference between the two. There's no algorithmic change required at all. Just a pre-pass you have to manually design yourself instead of having a compiler/runtime do it for you. C is mostly about doing things manually.
Length-prefix being optional is a selling point. I don't always need that extra info for an algorithm so being required to do it for a every string makes my precompute+compute time never able to drop below O(n). (Ie hardware random number generator 1-128. I can pull from an "infinite string". Let's say it only generates characters so fast. So our string length changes all the time. But my usage of the data probably doesn't care how many random bytes I have. It just wants the next available unused byte as soon as it can get it after a request. I could be waiting on the device. But I could also have a buffer of characters pre-read. A length comparison is a needless waste of computation. A null check is more efficient.)
Length-prefix is a good guard against buffer overflow? So is sane usage of library functions and implementation. What if I pass in malformed data? My buffer is 2 bytes long but I tell the function it's 7! Ex: If gets() was intended to be used on known data it could've had an internal buffer check that tested compiled buffers and malloc() calls and still follow spec. If it was meant to be used as a pipe for unknown STDIN to arrive at unknown buffer then clearly one can't know abut the buffer size which means a length arg is pointless, you need something else here like a canary check. For that matter, you can't length-prefix some streams and inputs, you just can't. Which means the length check has to be built into the algorithm and not a magic part of the typing system. TL;DR NUL-terminated never had to be unsafe, it just ended up that way via misuse.
counter-counter point: NUL-termination is annoying on binary. You either need to do length-prefix here or transform NUL bytes in some way: escape-codes, range remapping, etc... which of course means more-memory-usage/reduced-information/more-operations-per-byte. Length-prefix mostly wins the war here. The only upside to a transform is that no additional functions have to be written to cover the length-prefix strings. Which means on your more optimized sub-O(n) routines you can have them automatically act as their O(n) equivalents without adding more code. Downside is, of course, time/memory/compression waste when used on NUL heavy strings. Depending on how much of your library you end up duplicating to operate on binary data, it may make sense to work solely with length-prefix strings. That said one could also do the same with length-prefix strings... -1 length could mean NUL-terminated and you could use NUL-terminated strings inside length-terminated.
Concat: "O(n+m) vs O(m)" I'm assuming your referring to m as the total length of the string after concatenating because they both have to have that number of operations minimum (you can't just tack-on to string 1, what if you have to realloc?). And I'm assuming n is a mythical amount of operations you no longer have to do because of a pre-compute. If so, then the answer is simple: pre-compute. If you're insisting you'll always have enough memory to not need to realloc and that's the basis of the big-O notation then the answer is even more simple: do binary search on allocated memory for end of string 1, clearly there's a large swatch of infinite zeros after string 1 for us to not worry about realloc. There, easily got n to log(n) and I barely tried. Which if you recall log(n) is essentially only ever as large as 64 on a real computer, which is essentially like saying O(64+m), which is essentially O(m). (And yes that logic has been used in run-time analysis of real data structures in-use today. It's not bullshit off the top of my head.)
Concat()/Len() again: Memoize results. Easy. Turns all computes into pre-computes if possible/necessary. This is an algorithmic decision. It's not an enforced constraint of the language.
String suffix passing is easier/possible with NUL termination. Depending on how length-prefix is implemented it can be destructive on original string and can sometimes not even be possible. Requiring a copy and pass O(n) instead of O(1).
Argument-passing/de-referencing is less for NUL-terminated versus length-prefix. Obviously because you're passing less information. If you don't need length, then this saves a lot of footprint and allows optimizations.
You can cheat. It's really just a pointer. Who says you have to read it as a string? What if you want to read it as a single character or a float? What if you want to do the opposite and read a float as a string? If you're careful you can do this with NUL-termination. You can't do this with length-prefix, it's a data type distinctly different from a pointer typically. You'd most likely have to build a string byte-by-byte and get the length. Of course if you wanted something like an entire float (probably has a NUL inside it) you'd have to read byte-by-byte anyway, but the details are left to you to decide.
TL;DR Are you using binary data? If no, then NUL-termination allows more algorithmic freedom. If yes, then code quantity vs speed/memory/compression is your main concern. A blend of the two approaches or memoization might be best.
Many design decisions surrounding C stem from the fact that when it was originally implemented, parameter passing was somewhat expensive. Given a choice between e.g.
void add_element_to_next(arr, offset)
char[] arr;
int offset;
{
arr[offset] += arr[offset+1];
}
char array[40];
void test()
{
for (i=0; i<39; i++)
add_element_to_next(array, i);
}
versus
void add_element_to_next(ptr)
char *p;
{
p[0]+=p[1];
}
char array[40];
void test()
{
int i;
for (i=0; i<39; i++)
add_element_to_next(arr+i);
}
the latter would have been slightly cheaper (and thus preferred) since it only required passing one parameter rather than two. If the method being called didn't need to know the base address of the array nor the index within it, passing a single pointer combining the two would be cheaper than passing the values separately.
While there are many reasonable ways in which C could have encoded string lengths, the approaches that had been invented up to that time would have all required functions that should be able to work with part of a string to accept the base address of the string and the desired index as two separate parameters. Using zero-byte termination made it possible to avoid that requirement. Although other approaches would be better with today's machines (modern compilers often pass parameters in registers, and memcpy can be optimized in ways strcpy()-equivalents cannot) enough production code uses zero-byte terminated strings that it's hard to change to anything else.
PS--In exchange for a slight speed penalty on some operations, and a tiny bit of extra overhead on longer strings, it would have been possible to have methods that work with strings accept pointers directly to strings, bounds-checked string buffers, or data structures identifying substrings of another string. A function like "strcat" would have looked something like [modern syntax]
void strcat(unsigned char *dest, unsigned char *src)
{
struct STRING_INFO d,s;
str_size_t copy_length;
get_string_info(&d, dest);
get_string_info(&s, src);
if (d.si_buff_size > d.si_length) // Destination is resizable buffer
{
copy_length = d.si_buff_size - d.si_length;
if (s.src_length < copy_length)
copy_length = s.src_length;
memcpy(d.buff + d.si_length, s.buff, copy_length);
d.si_length += copy_length;
update_string_length(&d);
}
}
A little bigger than the K&R strcat method, but it would support bounds-checking, which the K&R method doesn't. Further, unlike the current method, it would be possible to easily concatenate an arbitrary substring, e.g.
/* Concatenate 10th through 24th characters from src to dest */
void catpart(unsigned char *dest, unsigned char *src)
{
struct SUBSTRING_INFO *inf;
src = temp_substring(&inf, src, 10, 24);
strcat(dest, src);
}
Note that the lifetime of the string returned by temp_substring would be limited by those of s and src, which ever was shorter (which is why the method requires inf to be passed in--if it was local, it would die when the method returned).
In terms of memory cost, strings and buffers up to 64 bytes would have one byte of overhead (same as zero-terminated strings); longer strings would have slightly more (whether one allowed amounts of overhead between two bytes and the maximum required would be a time/space tradeoff). A special value of the length/mode byte would be used to indicate that a string function was given a structure containing a flag byte, a pointer, and a buffer length (which could then index arbitrarily into any other string).
Of course, K&R didn't implement any such thing, but that's most likely because they didn't want to spend much effort on string handling--an area where even today many languages seem rather anemic.
According to Joel Spolsky in this blog post,
It's because the PDP-7 microprocessor, on which UNIX and the C programming language were invented, had an ASCIZ string type. ASCIZ meant "ASCII with a Z (zero) at the end."
After seeing all the other answers here, I'm convinced that even if this is true, it's only part of the reason for C having null-terminated "strings". That post is quite illuminating as to how simple things like strings can actually be quite hard.
I don't buy the "C has no string" answer. True, C does not support built-in higher-level types but you can still represent data-structures in C and that's what a string is. The fact a string is just a pointer in C does not mean the first N bytes cannot take on special meaning as a the length.
Windows/COM developers will be very familiar with the BSTR type which is exactly like this - a length-prefixed C string where the actual character data starts not at byte 0.
So it seems that the decision to use null-termination is simply what people preferred, not a necessity of the language.
One advantage of NUL-termination over length-prefixing, which I have not seen anyone mention, is the simplicity of string comparison. Consider the comparison standard which returns a signed result for less-than, equal, or greater-than. For length-prefixing the algorithm has to be something along the following lines:
Compare the two lengths; record the smaller, and note if they are equal (this last step might be deferred to step 3).
Scan the two character sequences, subtracting characters at matching indices (or use a dual pointer scan). Stop either when the difference is nonzero, returning the difference, or when the number of characters scanned is equal to the smaller length.
When the smaller length is reached, one string is a prefix of the other. Return negative or positive value according to which is shorter, or zero if of equal length.
Contrast this with the NUL-termination algorithm:
Scan the two character sequences, subtracting characters at matching indices [note that this is handled better with moving pointers]. Stop when the difference is nonzero, returning the difference. NOTE: If one string is a PROPER prefix of the other, one of the characters in the subtraction will be NUL, i.e zero, and the comparison will naturally stop there.
If the difference is zero, -only then- check if either character is NUL. If so, return zero, otherwise continue to next character.
The NUL-terminated case is simpler, and very easy to implement efficiently with a dual pointer scan. The length-prefixed case does at least as much work, nearly always more. If your algorithm has to do a lot of string comparisons [e.g a compiler!], the NUL-terminated case wins out. Nowadays that might not be as important, but back in the day, heck yeah.
gcc accept the codes below:
char s[4] = "abcd";
and it's ok if we treat is as an array of chars but not string. That is, we can access it with s[0], s[1], s[2], and s[3], or even with memcpy(dest, s, 4). But we'll get messy characters when we trying with puts(s), or worse with strcpy(dest, s).
I think the better question is why you think C owes you anything? C was designed to give you what you need, nothing more. You need to loose the mentality that the language must provide you with everything. Or just continue to use your higher level languages that will give you the luxary of String, Calendar, Containers; and in the case of Java you get one thing in tonnes of variety. Multiple types String, multiple types of unordered_map(s).
Too bad for you, this was not the purpose of C. C was not designed to be a bloated language that offers from a pin to an anchor. Instead you must rely on third party libraries or your own. And there is nothing easier than creating a simple struct that will contain a string and its size.
struct String
{
const char *s;
size_t len;
};
You know what the problem is with this though. It is not standard. Another language might decide to organize the len before the string. Another language might decide to use a pointer to end instead. Another might decide to use six pointers to make the String more efficient. However a null terminated string is the most standard format for a string; which you can use to interface with any language. Even Java JNI uses null terminated strings.
Lastly, it is a common saying; the right data structure for the task. If you find that need to know the size of a string more than anything else; well use a string structure that allows you to do that optimally. But don't make claims that that operation is used more than anything else for everybody. Like, why is knowing the size of a string more important than reading its contents. I find that reading the contents of a string is what I mostly do, so I use null terminated strings instead of std::string; which saves me 5 pointers on a GCC compiler. If I can even save 2 pointers that is good.

What is a "wide character string" in C language?

I came across this in the book:
wscanf(L"%lf", &variable);
where the first parameter is of type of wchar_t *.
This s different from scanf("%lf", &variable); where the first parameter is of type char *.
So what is the difference than. I have never heard "wide character string" before. I have heard something called Raw String Literals which is printing the string as it is (no need for things like escape sequences) but that was not in C.
The exact nature of wide characters is (purposefully) left implementation defined.
When they first invented the concept of wchar_t, ISO 10646 and Unicode were still competing with each other (whereas they now, mostly cooperate). Rather than try to decree that an international character would be one or the other (or possibly something else entirely) they simply provided a type (and some functions) that the implementation could define to support international character sets as they chose.
Different implementations have exercised that potential for variation. For example, if you use Microsoft's compiler on Windows, wchar_t will be a 16-bit type holding UTF-16 Unicode (originally it held UCS-2 Unicode, but that's now officially obsolete).
On Linux, wchar_t will more often be a 32-bit type, holding UCS-4/UTF-32 encoded Unicode. Ports of gcc to at least some other operating systems do the same, though I've never tried to confirm that it's always the case.
There is, however, no guarantee of that. At least in theory an implementation on Linux could use 16 bits, or one on Windows could use 32 bits, or either one could decide to use 64 bits (though I'd be a little surprised to see that in reality).
In any case, the general idea of how things are intended to work, is that a single wchar_t is sufficient to represent a code point. For I/O, the data is intended to be converted from the external representation (whatever it is) into wchar_ts, which (is supposed to) make them relatively easy to manipulate. Then during output, they again get transformed into the encoding of your choice (which may be entirely different from the encoding you read).
"Wide character string" is referring to the encoding of the characters in the string.
From Wikipedia:
A wide character is a computer character datatype that generally has a
size greater than the traditional 8-bit character. The increased
datatype size allows for the use of larger coded character sets.
UTF-16 is one of the most commonly used wide character encodings.
Further, wchar_t is defined by Microsoft as an unsigned short(16-bit) data object. This could be and is most likely a different definition in other operating systems or languages.
Taken from the Wikipedia article from the comment below:
"The width of wchar_t is compiler-specific and can be as small as 8
bits. Consequently, programs that need to be portable across any C or
C++ compiler should not use wchar_t for storing Unicode text. The
wchar_t type is intended for storing compiler-defined wide characters,
which may be Unicode characters in some compilers."

Why isn't wchar_t widely used in code for Linux / related platforms?

This intrigues me, so I'm going to ask - for what reason is wchar_t not used so widely on Linux/Linux-like systems as it is on Windows? Specifically, the Windows API uses wchar_t internally whereas I believe Linux does not and this is reflected in a number of open source packages using char types.
My understanding is that given a character c which requires multiple bytes to represent it, then in a char[] form c is split over several parts of char* whereas it forms a single unit in wchar_t[]. Is it not easier, then, to use wchar_t always? Have I missed a technical reason that negates this difference? Or is it just an adoption problem?
wchar_t is a wide character with platform-defined width, which doesn't really help much.
UTF-8 characters span 1-4 bytes per character. UCS-2, which spans exactly 2 bytes per character, is now obsolete and can't represent the full Unicode character set.
Linux applications that support Unicode tend to do so properly, above the byte-wise storage layer. Windows applications tend to make this silly assumption that only two bytes will do.
wchar_t's Wikipedia article briefly touches on this.
The first people to use UTF-8 on a Unix-based platform explained:
The Unicode Standard [then at version 1.1]
defines an
adequate character set but an
unreasonable representation [UCS-2]. It states
that all characters are 16 bits wide [no longer true]
and are communicated and stored in 16-bit units.
It also reserves a pair
of characters (hexadecimal FFFE and
FEFF) to detect byte order in
transmitted text, requiring state in
the byte stream. (The Unicode
Consortium was thinking of files, not
pipes.) To adopt this encoding, we
would have had to convert all text
going into and out of Plan 9 between
ASCII and Unicode, which cannot be
done. Within a single program, in
command of all its input and output,
it is possible to define characters as
16-bit quantities; in the context of a
networked system with hundreds of
applications on diverse machines by
different manufacturers [italics mine], it is
impossible.
The italicized part is less relevant to Windows systems, which have a preference towards monolithic applications (Microsoft Office), non-diverse machines (everything's an x86 and thus little-endian), and a single OS vendor.
And the Unix philosophy of having small, single-purpose programs means fewer of them need to do serious character manipulation.
The source for our tools and
applications had already been
converted to work with Latin-1, so it
was ‘8-bit safe’, but the conversion
to the Unicode Standard and UTF[-8] is
more involved. Some programs needed no
change at all: cat, for instance,
interprets its argument strings,
delivered in UTF[-8], as file names
that it passes uninterpreted to the
open system call, and then just copies
bytes from its input to its output; it
never makes decisions based on the
values of the bytes...Most programs,
however, needed modest change.
...Few tools actually need to operate
on runes [Unicode code points]
internally; more typically they need
only to look for the final slash in a
file name and similar trivial tasks.
Of the 170 C source programs...only 23
now contain the word Rune.
The programs that do store runes
internally are mostly those whose
raison d’être is character
manipulation: sam (the text editor),
sed, sort, tr, troff, 8½ (the window
system and terminal emulator), and so
on. To decide whether to compute using
runes or UTF-encoded byte strings
requires balancing the cost of
converting the data when read and
written against the cost of converting
relevant text on demand. For programs
such as editors that run a long time
with a relatively constant dataset,
runes are the better choice...
UTF-32, with code points directly accessible, is indeed more convenient if you need character properties like categories and case mappings.
But widechars are awkward to use on Linux for the same reason that UTF-8 is awkward to use on Windows. GNU libc has no _wfopen or _wstat function.
UTF-8, being compatible to ASCII, makes it possible to ignore Unicode somewhat.
Often, programs don't care (and in fact, don't need to care) about what the input is, as long as there is not a \0 that could terminate strings. See:
char buf[whatever];
printf("Your favorite pizza topping is which?\n");
fgets(buf, sizeof(buf), stdin); /* Jalapeños */
printf("%s it shall be.\n", buf);
The only times when I found I needed Unicode support is when I had to have a multibyte character as a single unit (wchar_t); e.g. when having to count the number of characters in a string, rather than bytes. iconv from utf-8 to wchar_t will quickly do that. For bigger issues like zero-width spaces and combining diacritics, something more heavy like icu is needed—but how often do you do that anyway?
wchar_t is not the same size on all platforms. On Windows it is a UTF-16 code unit that uses two bytes. On other platforms it typically uses 4 bytes (for UCS-4/UTF-32). It is therefore unlikely that these platforms would standardize on using wchar_t, since it would waste a lot of space.

Resources