I am on the following page:
https://www.quackit.com/sql_server/mac/install_sql_server_on_a_mac.cfm
In step 1, it says to use the following Docker command in a terminal:
docker pull microsoft/mssql-server-linux
However, that command is outdated and did not work.
I made my way to the following URL:
https://hub.docker.com/_/microsoft-mssql-server
I used the following command I found there:
docker pull mcr.microsoft.com/mssql/server:2019-latest
Using the command directly above, I could see the terminal pulling and completing the installation.
So now in step 2, it says to use the following Docker command:
docker run -d --name Homer -e 'ACCEPT_EULA=Y' -e 'SA_PASSWORD=myPassw0rd' -p 1433:1433 microsoft/mssql-server-linux
But then says if I used a different container, I have to replace "microsoft/mssql-server-linux" with my container image.
This is where I'm stuck.
I tried to use the following:
docker run -d --name Homer -e 'ACCEPT_EULA=Y' -e 'SA_PASSWORD=myPassw0rd' -p 1433:1433 mcr.microsoft.com/mssql
But I get the following error:
Unable to find image 'mcr.microsoft.com/mssql:latest' locally
docker: Error response from daemon: manifest for mcr.microsoft.com/mssql:latest not found: manifest unknown: manifest tagged by "latest" is not found.
What am I doing wrong?
When you pulled the image, you used:
mcr.microsoft.com/mssql/server:2019-latest
When you ran the container, you used something else:
docker run -d ... mcr.microsoft.com/mssql
Why did you shorten this and leave stuff out of it? Docker can't read your mind or perform auto-complete for you. Try:
docker run -d ... mcr.microsoft.com/mssql/server:2019-latest
Related
I want to create a Docker network and use it with a SQL Server.
Here is what I've done:
# Setup Network
sudo docker network create -d bridge dockerapi-dev
# Setup MSSQL Server
sudo docker pull mcr.microsoft.com/mssql/server
sudo docker run -e "ACCEPT_EULA=Y" -e "SA_PASSWORD=password" -p 1433:1433 -d mcr.microsoft.com/mssql/server --network dockerapi-dev --name mssqlserver
Under sudo docker network ls my network "dockerapi-dev" shows up as "bridge" as I want it to.
With the last command, I get the following error message:
docker: Error response from daemon: OCI runtime create failed: container_linux.go:345: starting container process caused "exec: \"--network\": executable file not found in $PATH": unknown.
I would be grateful if someone could help me.
The error message is a hint that it thinks --network is part of the image to run.
Re-order your arguments like this (the image to run is last):
sudo docker run -e "ACCEPT_EULA=Y" -e "SA_PASSWORD=password" -p 1433:1433 -d --network dockerapi-dev --name mssqlserver mcr.microsoft.com/mssql/server
docker run -i --rm -p 8080:8080 default:latest fails for appsody quarkus stack. the image is tagged appsody-quarkus:latest
I tried
docker run -i --rm -p 8080:8080 appsody-quarkus:latest
$ docker run -i --rm -p 8080:8080 default:latest
Unable to find image 'default:latest' locally
docker: Error response from daemon: pull access denied for default, repository does not exist or may require 'docker login': denied: requested access to the resource is denied.
See 'docker run --help'.
I think you have a typo, try appsody/quarkus
That is a typo in the README.md for the stack.
You have it right with appsody-quarkus:latest
There is a PR for fixing the doc
https://github.com/appsody/stacks/pull/451
I created and run a SQL Server docker container. I stop it and I don't know how to start it again.
I use this command line:
sudo docker run --name sql_server_db -e 'ACCEPT_EULA=Y' -e 'SA_PASSWORD=TEST_XXXXXXX' -p 1433:1433 -d mcr.microsoft.com/mssql/server:2017-latest
Type the following command to start the image, where <container_name> is the name of the image:
docker start <container_name>
I don't know what I am doing wrong. Have made many attempts to run SQL Server in Docker, but all have been unsuccessful. Here's a copy of the text in my terminal for the last attempt:
Jennifers-MacBook-Pro:~ ziema26$ sudo docker pull microsoft/mssql-server-linux
Password:
Using default tag: latest
latest: Pulling from microsoft/mssql-server-linux
Digest: sha256:6c4a13ade5778251bfba648c21fa7968f02aa5b86a7d8b66be710faf8626b38f
Status: Image is up to date for microsoft/mssql-server-linux:latest
Jennifers-MacBook-Pro:~ ziema26$
sudo docker run -e "ACCEPT_EULA=Y" -e "SA_PASSWORD=<password>" -p 1433:1433 --name mydb2 -d microsoft/mssql-server-linux
-bash: !: event not found
In the examples found on the mssql-server-linux Dockerhub page, it recommeds using a strong password...with the example yourStrong(!)Password . If you try and connect to your container passing in special characters like (, ! or ) you'll have problems. Specifically ! is a special character in bash, which refers to the previous command resulting in that error you're receiving, -bash: !: event not found
You'll need to escape these characters, e.g docker exec -it mssql-container-name /opt/mssql-tools/bin/sqlcmd -S localhost -U sa -P yourStrong\(\!\)Password or use single quotes.
I'm a Docker newbie and tried to resolve the issue after checking similar SO questions without success. So please don't mark it as a duplicate .
Issue :
The container always exits immediately after its created and running.
I have tried to run the mssql instance using command
docker run -e 'ACCEPT_EULA=Y' -e 'SA_PASSWORD=Technocrat123’ -p 1433:1433 -d microsoft/mssql-server-linux
when trying as similar SO link link
$ docker run -t -d --name microsoft/mssql-server-linux 0adcdf822722
got the following error ,
Unable to find image '0adcdf822722:latest' locally
docker: Error response from daemon: repository 0adcdf822722 not found: does not exist or no pull access.
when tried to kill the process referring link1
Kill: illegal process id: PID
I'm using a mac machine. Thanks in advance.
Edit :
After running the log after run command like
docker logs 0adcdf822722
it shows
This is an evaluation version. There are [160] days left in the evaluation period.
The SQL Server End-User License Agreement (EULA) must be accepted before SQL
Server can start. The license terms for this product can be downloaded from
http://go.microsoft.com/fwlink/?LinkId=746388.
You can accept the EULA by specifying the --accept-eula command line option,
setting the ACCEPT_EULA environment variable, or using the mssql-conf tool.
But already in the run command I have set 'ACCEPT_EULA=Y'.
Your password (such as Technocrat123) doesn't meet the complexity requirements. So try adding a non-alphanumeric characters such as exclamation point (!). Secondly, use double quotes instead of single.
To check for errors, run: docker logs ID (where ID is container ID from docker ps).
This worked for me:
docker run -e "ACCEPT_EULA=Y" -e "SA_PASSWORD=Sprpwd1234" --name sql_server_dev -p 1433:1433 -d store/microsoft/mssql-server-linux:2017-GA
Using (") instead of ('). Running Docker on Windows 10.
There is a typo in the command you are running:
docker run -e 'ACCEPT_EULA=Y' -e 'SA_PASSWORD=Technocrat123’ -p 1433:1433 -d microsoft/mssql-server-linux
'Technocrat123’ should be 'Technocrat123'. The typo is in the end: ’ vs '.
The correct command is:
docker run -e 'ACCEPT_EULA=Y' -e 'SA_PASSWORD=Technocrat123' -p 1433:1433 -d microsoft/mssql-server-linux
I was running Docker on Mac and trying to install sql-server. Initially, I was pasting the command provided here - https://learn.microsoft.com/en-us/sql/linux/quickstart-install-connect-docker changing password. Then I would try to run the docker image. This gave me the said error "This is an evaluation version.....". I did an additional step, after running the command on the above link. I ran it again as docker run -e 'ACCEPT_EULA=Y' -e 'MSSQL_SA_PASSWORD=Very_StrongPassword' -p 1401:1433 microsoft/mssql-server-linux:2017-latest. This kicked off installation of sql-server. This installation takes around 20-30 mins. Then the docker image is ready to use.