I dont know whats the problem with that sql query :
ALTER DATABASE myDB SET EMERGENCY;
i got that error :
Msg 102, Niveau 15, Etat 6, Ligne 1
Incorrect syntaxt near 'EMERGENCY';
I use Microsoft SQL Server 2000 - 8.00.760 and SSMD 2016.
I dont know whats the problem
The issue is that you are using SQL Server 2000. Paul Randal mentions here
I decided to add a new feature to SQL Server 2005 called EMERGENCY-mode repair that will do steps 2 and 3 as an atomic operation.
So the syntax you are trying to do does not exist in 2000.
The "hacking system tables" he mentions is described here.
But you should be restoring from backup as first resort here.
Related
I have a graph tables and want to add constraint. Do as in the MS doc here
https://learn.microsoft.com/en-us/sql/relational-databases/tables/graph-edge-constraints?view=sql-server-2017
I do it:
ALTER TABLE bought ADD CONSTRAINT EC_BOUGHT1 CONNECTION (Customer TO Product, Supplier TO Product);
But receive the error:
Msg 102, Level 15, State 1, Line 3
Incorrect syntax near 'CONNECTION'.
What is the reason? how to fix it?
I suspect edge constraints were included in SQL Server 2017 CTP 2.0 but the feature didn't make the RTM version. I don't have an old SQL Server CTP install to verify my theory but edge constraints are not available in SQL Server 2017 RTM, at least through the latest CU (CU31 as of this writing).
Per the comments, #siggemannen submitted doc feedback to have the documentation clarified. Edge constraints are available in SQL Server 2019 and later versions, including Azure SQL Database.
I recently restored a SQL Server 2008 database into an instance of SQL Server 2016. Most of the functionality seems to work fine, but many of my stored procedures that include updates to an application database table called SYS_USER fails with the following error:
Msg 102, Level 15, State 1, Procedure SYS_USERupdate, Line 35 [Batch Start Line 0]
Incorrect Syntax near '#errorNumber'
The database does not have a stored procedure called SYS_Userupdate and none of the procedures' code includes the term #errorNumber. I attempted to run the SQL query from one of the failing procedures directly in SQL Server Management Studio and received the same error message. Here is the SQL query that is failing:
UPDATE SYS_USER
SET SYS_USER_LGF_DT = GETDATE()
WHERE SYS_USER_ID = #SYS_USER_ID
I plugged in a valid value for the #SYS_USER_ID variable. Similar queries in related to other tables run without an issue. All of the stored procedures work on a SQL Server 2008 instance with no errors. Also, the database compatibility_level to 100, which should be acceptable for SQL Server 2016.
This happens when you're not running on a correct version of SQL Server, or if the compatibility level of the database isn't set sufficiently. So change it to 130
To check compatibility level:
select compatibility_level
from sys.databases
where name = '<database name>'
To alter compatibility level:
alter database <database-name>
set compatibility level = 130 -- SQL Server 2016
Compatibility levels list for all SQL versions: ALTER DATABASE (Transact-SQL) Compatibility Level
Reposting the answer since it was proposed in a comment to the question. The solution to the problem was that there were triggers on the affected tables that I did not know were there. Syntax errors on these triggers were causing insert and update queries on the tables to fail.
Credit to Jeroen Mostert https://stackoverflow.com/users/4137916/jeroen-mostert for helping with this!
I exhausted 2 hours on google searching for answers, without any solutions. I need serious help with this.
DROP TABLE IF EXISTS dbo.MySqlTable
that's the only line of code on my page, when I execute it, I get
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'IF'.
Here's a screenshot:
Drop Table
I just don't get why I can't drop the table.
What's weird is that it does drop on my PC, on this school laptop, nothing.I installed SQL Server 2017 on both. VS 2013 on my PC for later, hopefully, and VS 2015 on my Laptop. But, I haven't integrated those yet.
This feature is available only on SQL Server 2016 which is compatibility level of 130. Check your db on what compatibility level is.
select name, compatibility_level from sys.databases
If it is less than 130 you can alter it to 130 (2016) or 140 (2017) as below
alter database testdb set compatibility_level = 130
I seriously hate these things sometimes.
I removed IF EXISTS from my code, and simply did the usual DROP TABLE and it worked -_-
The first time I tried to drop a table on SQL Server 2017, it failed. After an hour on the internet, I learned that I had I had to use the IF EXISTS clause, and guess what, It worked.
When I got this laptop and installed the same SQL Server 2017, I obviously tried what took me an hour to find, DROP TABLE IF EXISTS, though that failed.
Thanks everyone.
Though, why did I use different DROP statements in the same version of SQL Server 2017?
I have a feeling I'm going to encounter more problems in the future.
I am using the free azure websites and made an sql database. I need to create the db tables, and then insert the dummy in.
I tried to generate the scripts through sql management studio but I get a lot of errors when I run it against the azure db.
Msg 40508, Level 16, State 1, Line 1
USE statement is not supported to switch between databases. Use a new connection to connect to a different Database.
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near 'CONTAINMENT'.
Msg 102, Level 15, State 1, Line 11
Incorrect syntax near 'COMPATIBILITY_LEVEL'.
How can I get the data into my azure database?
Just taking a guess here, based on the errors: When generating scripts via SSMS, you need to specify output specific to Windows Azure SQL Database (formerly known as SQL Azure). I don't have it installed at the moment so I can't provide you with a screenshot. I'll update my answer, should I get it installed before you verify this is indeed the issue.
as David mentioned above, you can specify the script generation to target Windows Azure SQL Database
Hi this may be a little late but I found the this link to be helpful:
You basically have to manualy change the context (click on the correct database on the list of dropdown) before executing the query. You may have noticed this when working between databases.
Hope this helps
Why is ROW_NUMBER() not recognized as a function name in SQL Server 2008?
I try this
SELECT
ROW_NUMBER() AS Row, Lname
FROM MEN
GO
and I get this error:
Msg 195, Level 15, State 10, Line 1
'ROW_NUMBER' is not a recognized
function name.
You appear to be using the wrong syntax. Here is an example using the AdventureWorks database.
select
row_number() over(order by Name),
Name
from HumanResources.Department
Extending the other 2 answers...
I've tried the exact same command on SQL 2005 with 2 databases.
For both compatibility levels 80 and 90, the error is:
Msg 1035, Level 15, State 10, Line 2
Incorrect syntax near 'ROW_NUMBER', expected 'OVER'.
I can only generate this error on a SQL 2000 box:
Msg 195, Level 15, State 10, Line 2
'ROW_NUMBER' is not a recognized function name.
What does SELECT ##version say? I'd make 100% sure that you are on the version you expect...
My other thought is compat level 65 which can't be set explicitly in SQL Server 2005 and above it seems. And I don't have any legacy databases lying around to test.
Check your database compatibility; ensure that it's set to 90 or higher.
It appears there are at least 2 things that are off the mark here.
The syntax in your question is incorrect, but wouldn't be producing the unrecognized function error.
SQL 2005 and 2008 do support the ROW_NUMBER OVER() keywords/command. Perhaps are you using SQL 2008 Management Studio to connect to a SQL 2000 machine? Double check with SELECT ##Version that your DB is indeed a SQL 2008 DB.
If you're using SSMS that says SQL Sever 2008, doesn't necessarily mean that you're connect to the respective DB. Using ##version to check the version of the DB you're connected to because SQL 2005 uses : [ROW_NUMBER() OVER (ORDER BY ColName)]