Trying to install on High Sierra:
$ sudo /opt/local/bin/port install realpath
---> Fetching archive for realpath
---> Attempting to fetch realpath-1.0.1_1.darwin_17.x86_64.tbz2 from https://packages.macports.org/realpath
---> Attempting to fetch realpath-1.0.1_1.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/realpath
---> Installing realpath #1.0.1_1
---> Activating realpath #1.0.1_1
---> Cleaning realpath
---> Scanning binaries for linking errors
---> No broken files found.
---> Found 10 broken ports, determining rebuild order
You can always run 'port rev-upgrade' again to fix errors.
The following ports will be rebuilt:
blosc #1.5.2
llvm-3.4 #3.4.2
cctools #862+llvm34
db48 #4.8.30
py27-numexpr #2.4
gettext #0.19.4
pcre #8.36
swig #3.0.5
hdf5 #1.8.14+cxx
zmq #3.2.5
Continue? [Y/n]: y
---> Fetching archive for lz4
---> Attempting to fetch lz4-1.9.3_1.darwin_17.x86_64.tbz2 from https://packages.macports.org/lz4
---> Attempting to fetch lz4-1.9.3_1.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/lz4
---> Installing lz4 #1.9.3_1
---> Activating lz4 #1.9.3_1
---> Cleaning lz4
---> Fetching archive for zlib
---> Attempting to fetch zlib-1.2.11_0.darwin_17.x86_64.tbz2 from https://packages.macports.org/zlib
---> Attempting to fetch zlib-1.2.11_0.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/zlib
---> Installing zlib #1.2.11_0
---> Cleaning zlib
---> Deactivating zlib #1.2.8_0
---> Cleaning zlib
---> Activating zlib #1.2.11_0
---> Cleaning zlib
---> Fetching archive for libiconv
---> Attempting to fetch libiconv-1.16_1.darwin_17.x86_64.tbz2 from https://packages.macports.org/libiconv
---> Attempting to fetch libiconv-1.16_1.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/libiconv
---> Installing libiconv #1.16_1
---> Cleaning libiconv
---> Deactivating libiconv #1.14_0
---> Cleaning libiconv
---> Activating libiconv #1.16_1
---> Cleaning libiconv
---> Fetching archive for ncurses
---> Attempting to fetch ncurses-6.2_1.darwin_17.x86_64.tbz2 from https://packages.macports.org/ncurses
---> Attempting to fetch ncurses-6.2_1.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/ncurses
---> Installing ncurses #6.2_1
---> Cleaning ncurses
---> Deactivating ncurses #5.9_2
---> Cleaning ncurses
---> Activating ncurses #6.2_1
---> Cleaning ncurses
---> Computing dependencies for gettext
---> Fetching archive for gettext
---> Attempting to fetch gettext-0.19.8.1_2.darwin_17.x86_64.tbz2 from https://packages.macports.org/gettext
---> Attempting to fetch gettext-0.19.8.1_2.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/gettext
---> Installing gettext #0.19.8.1_2
---> Cleaning gettext
---> Computing dependencies for gettext
---> Deactivating gettext #0.19.4_0
---> Cleaning gettext
---> Activating gettext #0.19.8.1_2
---> Cleaning gettext
---> Computing dependencies for xz
---> Fetching archive for xz
---> Attempting to fetch xz-5.2.5_0.darwin_17.x86_64.tbz2 from https://packages.macports.org/xz
---> Attempting to fetch xz-5.2.5_0.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/xz
---> Installing xz #5.2.5_0
---> Cleaning xz
---> Computing dependencies for xz
---> Deactivating xz #5.2.1_0
---> Cleaning xz
---> Activating xz #5.2.5_0
---> Cleaning xz
---> Computing dependencies for zstd
---> Fetching archive for zstd
---> Attempting to fetch zstd-1.5.0_0.darwin_17.x86_64.tbz2 from https://packages.macports.org/zstd
---> Attempting to fetch zstd-1.5.0_0.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/zstd
---> Installing zstd #1.5.0_0
---> Activating zstd #1.5.0_0
---> Cleaning zstd
---> Fetching archive for lzo2
---> Attempting to fetch lzo2-2.10_0.darwin_17.x86_64.tbz2 from https://packages.macports.org/lzo2
---> Attempting to fetch lzo2-2.10_0.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/lzo2
---> Installing lzo2 #2.10_0
---> Cleaning lzo2
---> Deactivating lzo2 #2.08_0
---> Cleaning lzo2
---> Activating lzo2 #2.10_0
---> Cleaning lzo2
---> Computing dependencies for snappy
---> Fetching archive for snappy
---> Attempting to fetch snappy-1.1.9_2.darwin_17.x86_64.tbz2 from https://packages.macports.org/snappy
---> Attempting to fetch snappy-1.1.9_2.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/snappy
---> Installing snappy #1.1.9_2
---> Activating snappy #1.1.9_2
---> Cleaning snappy
---> Computing dependencies for blosc
---> Fetching archive for blosc
---> Attempting to fetch blosc-1.21.0_0.darwin_17.x86_64.tbz2 from https://packages.macports.org/blosc
---> Attempting to fetch blosc-1.21.0_0.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/blosc
---> Installing blosc #1.21.0_0
---> Cleaning blosc
---> Computing dependencies for blosc
---> Deactivating blosc #1.5.2_0
---> Cleaning blosc
---> Activating blosc #1.21.0_0
---> Cleaning blosc
---> Fetching archive for libffi
---> Attempting to fetch libffi-3.3_1.darwin_17.x86_64.tbz2 from https://packages.macports.org/libffi
---> Attempting to fetch libffi-3.3_1.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/libffi
---> Installing libffi #3.3_1
---> Cleaning libffi
---> Deactivating libffi #3.2.1_0
---> Cleaning libffi
---> Activating libffi #3.3_1
---> Cleaning libffi
---> Fetching archive for db48
---> Attempting to fetch db48-4.8.30_4.darwin_17.x86_64.tbz2 from https://packages.macports.org/db48
---> Attempting to fetch db48-4.8.30_4.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/db48
---> Unable to uninstall db48 #4.8.30_4, the following ports depend on it:
---> python27 #2.7.9_0
Warning: Uninstall forced. Proceeding despite dependencies.
---> Deactivating db48 #4.8.30_4
---> Cleaning db48
---> Uninstalling db48 #4.8.30_4
---> Cleaning db48
---> Installing db48 #4.8.30_4
---> Activating db48 #4.8.30_4
---> Cleaning db48
---> Computing dependencies for readline
---> Fetching archive for readline
---> Attempting to fetch readline-8.1.000_0.darwin_17.x86_64.tbz2 from https://packages.macports.org/readline
---> Attempting to fetch readline-8.1.000_0.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/readline
---> Installing readline #8.1.000_0
---> Activating readline #8.1.000_0
---> Cleaning readline
---> Computing dependencies for gdbm
---> Fetching archive for gdbm
---> Attempting to fetch gdbm-1.19_0.darwin_17.x86_64.tbz2 from https://packages.macports.org/gdbm
---> Attempting to fetch gdbm-1.19_0.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/gdbm
---> Installing gdbm #1.19_0
---> Cleaning gdbm
---> Computing dependencies for gdbm
---> Deactivating gdbm #1.11_1
---> Cleaning gdbm
---> Activating gdbm #1.19_0
---> Cleaning gdbm
---> Computing dependencies for perl5.28
---> Fetching archive for perl5.28
---> Attempting to fetch perl5.28-5.28.3_2.darwin_17.x86_64.tbz2 from https://packages.macports.org/perl5.28
---> Attempting to fetch perl5.28-5.28.3_2.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/perl5.28
---> Installing perl5.28 #5.28.3_2
---> Activating perl5.28 #5.28.3_2
---> Cleaning perl5.28
---> Computing dependencies for perl5
---> Fetching archive for perl5
---> Attempting to fetch perl5-5.28.3_0+perl5_28.darwin_17.noarch.tbz2 from https://packages.macports.org/perl5
---> Attempting to fetch perl5-5.28.3_0+perl5_28.darwin_17.noarch.tbz2.rmd160 from https://packages.macports.org/perl5
---> Installing perl5 #5.28.3_0+perl5_28
---> Cleaning perl5
---> Computing dependencies for perl5
---> Deactivating perl5 #5.12.4_0+perl5_16
---> Cleaning perl5
---> Activating perl5 #5.28.3_0+perl5_28
---> Cleaning perl5
---> Fetching archive for llvm_select
---> Attempting to fetch llvm_select-2_0.darwin_17.noarch.tbz2 from https://packages.macports.org/llvm_select
---> Attempting to fetch llvm_select-2_0.darwin_17.noarch.tbz2.rmd160 from https://packages.macports.org/llvm_select
---> Installing llvm_select #2_0
---> Cleaning llvm_select
---> Deactivating llvm_select #1.0_0
---> Cleaning llvm_select
---> Activating llvm_select #2_0
---> Cleaning llvm_select
---> Computing dependencies for llvm-3.4
---> Fetching archive for llvm-3.4
---> Attempting to fetch llvm-3.4-3.4.2_14.darwin_17.x86_64.tbz2 from https://packages.macports.org/llvm-3.4
---> Attempting to fetch llvm-3.4-3.4.2_14.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/llvm-3.4
---> Installing llvm-3.4 #3.4.2_14
---> Cleaning llvm-3.4
---> Computing dependencies for llvm-3.4
---> Deactivating llvm-3.4 #3.4.2_6
---> Cleaning llvm-3.4
---> Activating llvm-3.4 #3.4.2_14
---> Cleaning llvm-3.4
---> Computing dependencies for libedit
---> Fetching archive for libedit
---> Attempting to fetch libedit-20210216-3.1_0.darwin_17.x86_64.tbz2 from https://packages.macports.org/libedit
---> Attempting to fetch libedit-20210216-3.1_0.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/libedit
---> Installing libedit 20210216-3.1_0
---> Cleaning libedit
---> Computing dependencies for libedit
---> Deactivating libedit 20140620-3.1_0
---> Cleaning libedit
---> Activating libedit 20210216-3.1_0
---> Cleaning libedit
---> Fetching archive for bzip2
---> Attempting to fetch bzip2-1.0.8_0.darwin_17.x86_64.tbz2 from https://packages.macports.org/bzip2
---> Attempting to fetch bzip2-1.0.8_0.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/bzip2
---> Installing bzip2 #1.0.8_0
---> Cleaning bzip2
---> Deactivating bzip2 #1.0.6_0
---> Cleaning bzip2
---> Activating bzip2 #1.0.8_0
---> Cleaning bzip2
---> Computing dependencies for openssl
---> Fetching archive for openssl
---> Attempting to fetch openssl-1.1.1k_0.darwin_17.x86_64.tbz2 from https://packages.macports.org/openssl
---> Attempting to fetch openssl-1.1.1k_0.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/openssl
---> Installing openssl #1.1.1k_0
---> Cleaning openssl
---> Computing dependencies for openssl
---> Deactivating openssl #1.0.2_0
---> Cleaning openssl
---> Activating openssl #1.1.1k_0
---> Cleaning openssl
---> Fetching archive for icu
---> Attempting to fetch icu-67.1_4.darwin_17.x86_64.tbz2 from https://packages.macports.org/icu
---> Attempting to fetch icu-67.1_4.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/icu
---> Installing icu #67.1_4
---> Activating icu #67.1_4
---> Cleaning icu
---> Computing dependencies for libxml2
---> Fetching archive for libxml2
---> Attempting to fetch libxml2-2.9.12_1.darwin_17.x86_64.tbz2 from https://packages.macports.org/libxml2
---> Attempting to fetch libxml2-2.9.12_1.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/libxml2
---> Installing libxml2 #2.9.12_1
---> Cleaning libxml2
---> Computing dependencies for libxml2
---> Deactivating libxml2 #2.9.2_2
---> Cleaning libxml2
---> Activating libxml2 #2.9.12_1
---> Cleaning libxml2
---> Computing dependencies for xar
---> Fetching archive for xar
---> Attempting to fetch xar-1.8.0.452_0.darwin_17.x86_64.tbz2 from https://packages.macports.org/xar
---> Attempting to fetch xar-1.8.0.452_0.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/xar
---> Installing xar #1.8.0.452_0
---> Activating xar #1.8.0.452_0
---> Cleaning xar
---> Fetching archive for libcxx
---> Attempting to fetch libcxx-5.0.1_4.darwin_17.noarch.tbz2 from https://packages.macports.org/libcxx
---> Attempting to fetch libcxx-5.0.1_4.darwin_17.noarch.tbz2.rmd160 from https://packages.macports.org/libcxx
---> Installing libcxx #5.0.1_4
---> Activating libcxx #5.0.1_4
---> Cleaning libcxx
---> Computing dependencies for llvm-10
---> Fetching archive for llvm-10
---> Attempting to fetch llvm-10-10.0.1_1.darwin_17.x86_64.tbz2 from https://packages.macports.org/llvm-10
---> Attempting to fetch llvm-10-10.0.1_1.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/llvm-10
---> Installing llvm-10 #10.0.1_1
---> Activating llvm-10 #10.0.1_1
---> Cleaning llvm-10
---> Computing dependencies for cctools
---> Fetching archive for cctools
---> Attempting to fetch cctools-949.0.1_1+llvm10.darwin_17.x86_64.tbz2 from https://packages.macports.org/cctools
---> Attempting to fetch cctools-949.0.1_1+llvm10.darwin_17.x86_64.tbz2.rmd160 from https://packages.macports.org/cctools
---> Installing cctools #949.0.1_1+llvm10
---> Cleaning cctools
---> Computing dependencies for cctools
---> Deactivating cctools #862_1+llvm34
---> Cleaning cctools
---> Activating cctools #949.0.1_1+llvm10
---> Cleaning cctools
Error: rev-upgrade failed: invalid command name "::registry::entry4"
Error: Follow https://guide.macports.org/#project.tickets if you believe there is a bug.
I was able to get realpath by running:
brew install coreutils
What is the output from 'sudo /opt/local/bin/port diagnose'? And is there some reason that you haven't got '/opt/local/bin' in your PATH?
Related
I am newbie in docker and have been trying to run my react with docker using docker build.
`
Step 1/9 : FROM node:18.12.1-alpine
---> 6d7b7852bcd3
Step 2/9 : WORKDIR /app
---> Using cache
---> 52bdc49c2014
Step 3/9 : COPY package.json .
---> Using cache
---> 3920b54c5ec9
Step 4/9 : RUN yarn config set network-timeout 600000 -g
---> Running in 374a0b1cd0f9
yarn config v1.22.19
success Set "network-timeout" to "600000".
Done in 0.04s.
Removing intermediate container 374a0b1cd0f9
---> 00499f342961
Step 5/9 : RUN yarn install --verbose
---> Running in 223d0d40490c
yarn install v1.22.19
verbose 0.232714456 Checking for configuration file "/app/.npmrc".
verbose 0.233075334 Checking for configuration file "/usr/local/share/.npmrc".
verbose 0.23327504 Checking for configuration file "/usr/local/etc/npmrc".
verbose 0.233483662 Checking for configuration file "/root/.npmrc".
verbose 0.233677765 Checking for configuration file "/app/.npmrc".
verbose 0.234698832 Checking for configuration file "/app/.yarnrc".
verbose 0.235102797 Checking for configuration file "/usr/local/share/.yarnrc".
verbose 0.235299537 Found configuration file "/usr/local/share/.yarnrc".
verbose 0.235636309 Checking for configuration file "/usr/local/etc/yarnrc".
verbose 0.236023201 Checking for configuration file "/root/.yarnrc".
verbose 0.236307171 Checking for configuration file "/app/.yarnrc".
verbose 0.248050692 current time: 2022-12-18T19:09:37.677Z
info No lockfile found.
[1/4] Resolving packages...
verbose 0.304465887 Performing "GET" request to "https://registry.yarnpkg.com/#react-spring%2ftypes".
info There appears to be trouble with your network connection. Retrying...
verbose 134.153645027 Performing "GET" request to "https://registry.yarnpkg.com/#react-spring%2ftypes".
info There appears to be trouble with your network connection. Retrying...
verbose 267.268788936 Performing "GET" request to "https://registry.yarnpkg.com/#react-spring%2ftypes".
info There appears to be trouble with your network connection. Retrying...
verbose 400.388013951 Performing "GET" request to "https://registry.yarnpkg.com/#react-spring%2ftypes".
info There appears to be trouble with your network connection. Retrying...
verbose 533.508365167 Performing "GET" request to "https://registry.yarnpkg.com/#react-spring%2ftypes".
verbose 663.62858393 Error: connect ETIMEDOUT 2606:4700::6810:1923:443
at TCPConnectWrap.afterConnect [as oncomplete] (node:net:1300:16)
error An unexpected error occurred: "https://registry.yarnpkg.com/#react-spring%2ftypes: connect ETIMEDOUT 2606:4700::6810:1923:443".
info If you think this is a bug, please open a bug report with the information provided in "/app/yarn-error.log".
info Visit https://yarnpkg.com/en/docs/cli/install for documentation about this command.
The command '/bin/sh -c yarn install --verbose' returned a non-zero code: 1
`
It gives me There appears to be trouble with your network connection. Retrying.
I tried setting network-timeout and clearing cache but still giving me the same error.
However, it is working on my WSL2 but not on my Ubuntu 22.04.1 LTS
im trying to install lalsuite on conda https://github.com/conda-forge/lalsuite-feedstock
attempt 1 = conda-forge
(base) C:\Users\jack.flavell>conda install -c conda-forge lalsuite
Collecting package metadata (current_repodata.json): done
Solving environment: failed with initial frozen solve. Retrying with flexible solve.
Solving environment: failed with repodata from current_repodata.json, will retry with next repodata source.
Collecting package metadata (repodata.json): done
Solving environment: failed with initial frozen solve. Retrying with flexible solve.
Solving environment: /
Found conflicts! Looking for incompatible packages.
This can take several minutes. Press CTRL-C to abort.
Examining python=3.9: 100%|██████████████████████████████████████████████████████████████| 4/4 [00:01<00:00, 3.56it/s]- |failed
UnsatisfiableError: The following specifications were found to be incompatible with each other:
Output in format: Requested package -> Available versions
doesn't work + it states some packages aren't compatible but doesn't say which.
attempt 2 = messing with channels
(base) C:\Users\jack.flavell>conda config --add channels conda-forge
(base) C:\Users\jack.flavell>conda config --set channel_priority strict
(base) C:\Users\jack.flavell>conda install lalsuite
Collecting package metadata (current_repodata.json): done
Solving environment: failed with initial frozen solve. Retrying with flexible solve.
Solving environment: failed with repodata from current_repodata.json, will retry with next repodata source.
Collecting package metadata (repodata.json): done
Solving environment: failed with initial frozen solve. Retrying with flexible solve.
Solving environment: /
Found conflicts! Looking for incompatible packages.
This can take several minutes. Press CTRL-C to abort.-
failed
UnsatisfiableError: The following specifications were found to be incompatible with each other:
Output in format: Requested package -> Available versions
Note that strict channel priority may have removed packages required for satisfiability.
result from 2 ,similar to 1.
attempt 3 = use conda forge as part of my create env command
(base) C:\Users\jack.flavell>conda create -n gwe3 -c conda-forge -c lalsuite
Collecting package metadata (current_repodata.json): done
Solving environment: done
UnavailableInvalidChannel: The channel is not accessible or is invalid.
channel name: lalsuite
channel url: https://conda.anaconda.org/lalsuite
error code: 404
You will need to adjust your conda configuration to proceed.
Use `conda config --show channels` to view your configuration's current state,
and use `conda config --show-sources` to view config file locations.
so i do what message said in attempt 3
(base) C:\Users\jack.flavell>conda config --show channels
channels:
- conda-forge
- defaults
and no idea what to do next...
any idea how to install lalsuite? please?
##########################
extra info
ive tried python 2.7, 3.6, 3.10
ive read about many compatibility issus with lalsuite. eg no pip version < 18.
And so below is information about my environment from conda. it seems within the parameters ive seen around.
package
build
bzip2-1.0.8
h8ffe710_4 149 KB conda-forge
ca-certificates-2022.9.24
h5b45459_0 189 KB conda-forge
libffi-3.4.2
h8ffe710_5 41 KB conda-forge
libsqlite-3.39.4
hcfcfb64_0 642 KB conda-forge
libzlib-1.2.12
hcfcfb64_4 71 KB conda-forge
openssl-3.0.5
hcfcfb64_2 7.8 MB conda-forge
pip-22.2.2
pyhd8ed1ab_0 1.5 MB conda-forge
python-3.10.6
hcf16a7b_0_cpython 16.5 MB conda-forge
setuptools-65.4.1
pyhd8ed1ab_0 776 KB conda-forge
tk-8.6.12
h8ffe710_0 3.5 MB conda-forge
tzdata-2022d
h191b570_0 118 KB conda-forge
ucrt-10.0.20348.0
h57928b3_0 1.2 MB conda-forge
vc-14.2
hac3ee0b_8 14 KB conda-forge
vs2015_runtime-14.29.30139
h890b9b1_8 1.2 MB conda-forge
wheel-0.37.1
pyhd8ed1ab_0 31 KB conda-forge
xz-5.2.6
h8d14728_0 213 KB conda-forge
##############
update
attempt 4
I thought using conda install -c "conda-forge/label/cf202003" lalsuite would point specifically to a version, and so shouldn't fail. I got the link from here https://anaconda.org/conda-forge/lalsuite
however the output I get is
(wge3) C:\Users\jack.flavell>conda install -c "conda-forge/label/cf202003" lalsuite
Collecting package metadata (current_repodata.json): done
Solving environment: failed with initial frozen solve. Retrying with flexible solve.
Solving environment: failed with repodata from current_repodata.json, will retry with next repodata source.
Collecting package metadata (repodata.json): done
Solving environment: failed with initial frozen solve. Retrying with flexible solve.
Solving environment: \
Found conflicts! Looking for incompatible packages.
This can take several minutes. Press CTRL-C to abort.
failed
UnsatisfiableError: The following specifications were found to be incompatible with each other:
Output in format: Requested package -> Available versions
Note that strict channel priority may have removed packages required for satisfiability.
conda search confirms the package is there...
(wge4) C:\Users\jack.flavell>conda search lalsuite
Loading channels: done
# Name Version Build Channel
lalsuite 6.57 py_1 conda-forge
lalsuite 6.60 py_0 conda-forge
................
why the bloody hell does this not work?
what does it want?
what more info might help answer
arrrrrgggghhhhh >:(
######## update 2
I was under the impression that anything on pypi can be downloaded with pip. like here https://pypi.org/project/lalsuite/.
Below is just in a regular cmd not using conda
C:\Users\jack.flavell>"C:\Users\jack.flavell\AppData\Local\Programs\Python\Python37\Scripts\pip.exe" install lalsuite
ERROR: Could not find a version that satisfies the requirement lalsuite (from versions: none)
ERROR: No matching distribution found for lalsuite
WARNING: You are using pip version 20.1.1; however, version 22.2.2 is available.
You should consider upgrading via the 'c:\users\jack.flavell\appdata\local\programs\python\python37\python.exe -m pip install --upgrade pip' command.
... apparently not ...
should things be available on pip if i find them on pypi?
turns out it doesnt work on windows,i need linux
Each time I am trying to build and deploy my React Project on AWS Elastic Beanstalk using Docker, I am getting this error:
Stderr:fatal error: runtime: out of memory
The project is the basic react project and nothing more, serving it via nginx. What might be the reason of this error? And how do I resolve it. Please note, I have emptied my S3 bucket and have restarted the appServer too, to try and resolve any unnecessary memory or cache use. And I am able to successfully build and run this file locally. The logs are as follows:
Step 1/9 : FROM node:alpine as builder
---> eb56d56623e5
Step 2/9 : WORKDIR '/app'
---> Using cache
---> 41d7415dae07
Step 3/9 : COPY package.json .
---> Using cache
---> 95877ba9972c
Step 4/9 : RUN npm install
---> Using cache
---> c366758de80f
Step 5/9 : COPY . .
---> 5697eace7031
Step 6/9 : RUN npm run build
---> Running in 52cc1a3e6ac0
> react-project-frontend#0.1.0 build
> react-scripts --openssl-legacy-provider build
Creating an optimized production build...
2022/03/03 13:14:45.346275 [WARN] failed to execute command: docker build -t aws_beanstalk/staging-app /var/app/staging/, retrying...
2022/03/03 13:14:45.425369 [INFO] Running command /bin/sh -c docker build -t aws_beanstalk/staging-app /var/app/staging/
2022/03/03 13:14:47.001398 [ERROR] An error occurred during execution of command [app-deploy] - [Docker Specific Build Application]. Stop running the command. Error: failed to build docker image: Command /bin/sh -c docker build -t aws_beanstalk/staging-app /var/app/staging/ failed with error exit status 2. Stderr:fatal error: runtime: out of memory
You docker image does not enough memory allocated:
In the ElasticBeanstalk application environment Dockerrun.aws.json, you can increase the memory allocation ("memory": 80 to e.g. "memory": 100):
"containerDefinitions": [
{
"name": "request_repeater",
"image": "my/image",
"essential": true,
"memory": 80, <- change this
Also, maybe you need to change the instance type. For example the t2.nano has a max memory of 0.5 GB
You can do this in Modify capacity settings when you are creating your application, or edit in Configuration > Capacity setting on the current env configuration.
I want to create a simple jenkins pipeline for my react app in order to see how the concept works. Jenkins runs in a container in digitalocean and I want to be able to deploy in another container the react app. I have tested jenkins and its able to run docker commands.
I want to pull from gitlab the repo everytime the master code changes, then stop/remove the previous react container if it exists and finally build the app and deploy as a container. I also want to add that i want the docker with the react app to continue running until a new commit is made where the whole process repeats.
The build job in jenkins pull the repo and then starts to build the image but takes too long or ends in failure. I am guessing I messed up the Jenkinsfile so any help would be appreciated. Thanks
Dockerfile
# Stage 0
# Frontend build based on Node.js
FROM node:11.15.0-alpine as build-stage
RUN mkdir -p /usr/src/app
WORKDIR /usr/src/app
ENV PATH /usr/src/app/node_modules/.bin:$PATH
COPY package.json /usr/src/app/package.json
RUN npm install
RUN npm install react-scripts#latest -g
COPY . /usr/src/app
RUN npm run build
# Stage 1
# Production build based on Nginx with artifacts from Stage 0
FROM nginx:1.15.9-alpine
COPY config/nginx.conf /etc/nginx/conf.d/default.conf
COPY --from=build-stage /usr/src/app/build /usr/share/nginx/html
EXPOSE 1312
CMD ["nginx", "-g", "daemon off;"]
Dockerignore
# Items that don't need to be in a Docker image.
# Anything not used by the build system should go here.
Dockerfile
.dockerignore
.gitignore
README.md
# Artifacts that will be built during image creation.
# This should contain all files created during `npm run build`.
*/node_modules/
*/build/
Jenkinsfile
node {
def commit_id
stage('Preparation') {
checkout scm
sh "git rev-parse --short HEAD > .git/commit-id"
commit_id = readFile('.git/commit-id').trim()
}
stage('docker stop container') {
sh 'docker ps -f name=react-app -q | xargs --no-run-if-empty docker container stop'
sh 'docker container ls -a -f name=react-app -q | xargs -r docker container rm'
}
stage('docker build') {
sh 'docker build -t react-app .'
}
stage('docker run container') {
sh 'docker run -p 1312:1312 react-app'
}
}
Log
Sending build context to Docker daemon 1.979MB
Step 1/14 : FROM node:11.15.0-alpine as build-stage
---> f18da2f58c3d
Step 2/14 : RUN mkdir -p /usr/src/app
---> Using cache
---> 8c8351b005e4
Step 3/14 : WORKDIR /usr/src/app
---> Using cache
---> a8e6071878e2
Step 4/14 : ENV PATH /usr/src/app/node_modules/.bin:$PATH
---> Using cache
---> 4a19ac942393
Step 5/14 : COPY package.json /usr/src/app/package.json
---> Using cache
---> 112d7366e0d8
Step 6/14 : RUN npm install
---> Running in cc9dc5a446e4
[91mnpm WARN deprecated material-ui-pickers#2.2.4: You can now upgrade to #material-ui/pickers. Documentation for v2 can be found at https://material-ui-pickers-v2.dmtr-kovalenko.now.sh/
[0m[91mnpm WARN deprecated fsevents#2.0.6: Please update: there are crash fixes
[0m[91mnpm[0m[91m WARN deprecated core-js#1.2.7: core-js#<2.6.8 is no longer maintained. Please, upgrade to core-js#3 or at least to actual version of core-js#2.
[0m[91mnpm[0m[91m WARN deprecated flatten#1.0.2: I wrote this module a very long time ago; you should use something else.
[0m[91mnpm[0m[91m WARN deprecated left-pad#1.3.0: use String.prototype.padStart()
[0m
> core-js#2.6.9 postinstall /usr/src/app/node_modules/babel-runtime/node_modules/core-js
> node scripts/postinstall || echo "ignore"
[91m
[0mThe command '/bin/sh -c npm install' returned a non-zero code: 1
[Pipeline] }
[Pipeline] // stage
[Pipeline] }
[Pipeline] // node
[Pipeline] End of Pipeline
ERROR: script returned exit code 1
Finished: FAILURE
Updated stack on the jenkins installation on the host machine
[0m[91mFATAL ERROR: Zone Allocation failed - process out of memory
[0m
<--- Last few GCs --->
[5:0x556beb570000] 119407 ms: Scavenge 229.1 (301.3) -> 218.7 (305.3) MB, 48.4 / 0.6 ms allocation failure
[5:0x556beb570000] 121343 ms: Scavenge 232.4 (305.3) -> 220.2 (308.3) MB, 58.7 / 0.7 ms allocation failure
[5:0x556beb570000] 121894 ms: Scavenge 236.4 (308.3) -> 226.9 (310.8) MB, 97.5 / 1.8 ms allocation failure
[5:0x556beb570000] 122169 ms: Scavenge 239.4 (310.8) -> 232.3 (315.3) MB, 189.2 / 6.8 ms allocation failure
<--- JS stacktrace --->
==== JS stack trace =========================================
Security context: 0x1370fac25501 <JSObject>
2: _init(aka init) [/usr/local/lib/node_modules/npm/node_modules/bluebird/js/release/promise_array.js:78] [bytecode=0x22bac55a3529 offset=363](this=0x2f4f1accd31 <PromiseArray map = 0x1c9b649e33c1>,_=0x25339ac822d1 <undefined>,resolveValueIfEmpty=-2)
3: new constructor(aka PromiseArray) [/usr/local/lib/node_modules/npm/node_modules/bluebird/js/release/promise_array.js:24] [bytecode=0xc2a...
Resuming build at Mon Aug 05 14:43:10 UTC 2019 after Jenkins restart
Waiting to resume part of frontend-react #3: Finished waiting
Ready to run at Mon Aug 05 14:43:11 UTC 2019
[91mFATAL ERROR: Zone Allocation failed - process out of memory
[0m
<--- Last few GCs --->
[5:0x556beb570000] 119407 ms: Scavenge 229.1 (301.3) -> 218.7 (305.3) MB, 48.4 / 0.6 ms allocation failure
[5:0x556beb570000] 121343 ms: Scavenge 232.4 (305.3) -> 220.2 (308.3) MB, 58.7 / 0.7 ms allocation failure
[5:0x556beb570000] 121894 ms: Scavenge 236.4 (308.3) -> 226.9 (310.8) MB, 97.5 / 1.8 ms allocation failure
[5:0x556beb570000] 122169 ms: Scavenge 239.4 (310.8) -> 232.3 (315.3) MB, 189.2 / 6.8 ms allocation failure
<--- JS stacktrace --->
==== JS stack trace =========================================
Security context: 0x1370fac25501 <JSObject>
2: _init(aka init) [/usr/local/lib/node_modules/npm/node_modules/bluebird/js/release/promise_array.js:78] [bytecode=0x22bac55a3529 offset=363](this=0x2f4f1accd31 <PromiseArray map = 0x1c9b649e33c1>,_=0x25339ac822d1 <undefined>,resolveValueIfEmpty=-2)
3: new constructor(aka PromiseArray) [/usr/local/lib/node_modules/npm/node_modules/bluebird/js/release/promise_array.js:24] [bytecode=0xc2a...
[91mAborted (core dumped)
[0mThe command '/bin/sh -c npm install' returned a non-zero code: 134
[Pipeline] }
[Pipeline] // stage
[Pipeline] }
[Pipeline] // node
[Pipeline] End of Pipeline
ERROR: script returned exit code 134
Finished: FAILURE
"[0mThe command '/bin/sh -c npm install' returned a non-zero code: 1" Indicates the npm install command failed. A quick search and I found this An error occurred while running npm i (exit code 1). I am no NPM / Node expert but between exit 1 one and that resource it reads as NPM is unable to make a connection to the remote resource. IE network / proxy issues. Can you boild the project locally (on your development machine)? Are you and the Jenkins machine on the same network / using the same access point?
Today i spent some hours trying to install the gnuplotlanguage package with macports, with this result every time i tried
---> Computing dependencies for gnudatalanguage
---> Dependencies to be installed: pslib
---> Fetching archive for pslib
---> Attempting to fetch pslib-0.4.5_6.darwin_15.x86_64.tbz2 from http://fco.it.packages.macports.org/mirrors/macports-packages/pslib/pslib
---> Attempting to fetch pslib-0.4.5_6.darwin_15.x86_64.tbz2 from http://nue.de.packages.macports.org/pslib
---> Attempting to fetch pslib-0.4.5_6.darwin_15.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/pslib
---> Fetching distfiles for pslib
---> Attempting to fetch pslib-0.4.5.tar.gz from http://fco.it.distfiles.macports.org/mirrors/macports-distfiles/pslib
---> Verifying checksums for pslib
---> Extracting pslib
---> Applying patches to pslib
---> Configuring pslib
---> Building pslib
---> Staging pslib into destroot
Error: org.macports.destroot for port pslib returned: command execution failed
Error: Failed to install pslib
Please see the log file for port pslib for details:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_print_pslib/pslib/main.log
Error: The following dependencies were not installed: pslib
To report a bug, follow the instructions in the guide:
http://guide.macports.org/#project.tickets
Error: Processing of port gnudatalanguage failed
I tried to follow solutions found googling some of the lines that i thought could be causing this problem.
From the log file, lines like:
Can't run fetch on this port without elevated privileges. Escalating privileges back to root.
Can't run destroot under sudo without elevated privileges (due to mtree)
org.macports.destroot for port pslib returned: command execution failed
Error code: CHILDSTATUS 54561 2
I unfortunately found that none of the proposed solutions worked.
Has anyone found the same issue, and solved it? I really need GDL for a project.