I need to do 1 of two things (I believe):
1- Get a Custom Object ID so I can query it directly
2- Get a list of values of a specific field within the Object entries.
Ultimate End goal:
Add and modify rows in my custom object via external API. However to do this I need to check and make sure my new entry/row does not already exist.
What I have:
I have a custom object (called Customer_Arrays__c). It is a table that I can add new rows to (I will call entrys). Each entry has 6 or 7 fields. 1 of these fields is called (external_ID__c). This is the field I utilize to match to new incoming data to see if the entry already exists, or if it needs to add a new row to my table. This Customer_Arrays__c is a child to my opportunity I believe – it is part of every opportunity and each line item I add has a field defaulted to the opportunity.
Help I need:
1- How do I query the value of my Cutomer_Arrays__c based upon an opportunity ID?
2- How do I query a list of values in my (external_ID__c) based upon an opportunity ID?
Thanks for your help! I have read half a dozen+ posts on similar topics and am missing something. Examples of some Past try's that failed:
Select external_ID__c,FROM Custom_Arrays__c WHERE Opportunity='00...'
Select Id (Select ID, Custom_Arrays__c from Custom_Arrays__c) from Opportunity where id ='00...'
List FROM Custom_Arrays__c WHERE Opportunity='00...'
Select Id, external_ID__c, (Select external_ID__c FROM Custom_Arrays__c) WHERE Opportunity__c='00...'
Thanks again!
Only you know how did you name the lookup field (foreign key) from arrays to Opportunity. You'll need to check in setup, next to where external_ID__c is. Since it's a custom field (gets __c at the end), my guess is you went with default.
Try
SELECT Id, Name, External_Id__c
FROM Customer_Arrays__c
WHERE Opportunity__c = '006...'
Thank you eyescream, that got me almost all the way there. Turns out I also needed a __r for the parent child relationship.
Here is a snip out of my final code that works - I think it covers everything:
SELECT Field1__c, Opportunity__r.Id, Opportunity__r.Opportunity__c,
FROM Customer_Arrays__c
WHERE Opportunity__r.Id = '006...'.
Thank you so very much!!!
Related
I am new to SalesForce and SOQL so sorry in advance if the question has already been answered, if yes link it to me.
The aim of my SOQL query is to get all the contract information to generate PDF.
There are tables: Contract, Contact and Account
In the Contract table there are fields: Maitre_d_apprentissage__c, MaitreApprentissageNom1__c, MaitreApprentissagePrenom1__c, Apprenti__c, ApprentiNom__c, ApprentiPrenom__c
There are relationships:
Apprenti__r which link Apprenti__c to Contact table
Maitre_d_apprentissage__r which link Maitre_d_apprentissage__c to Contact table
When I looked at table, I saw that MaitreApprentissageNom1__c was equal to Maitre_d_apprentissage__r.LastName and ApprentiNom__c was equal to Apprenti__r.LastName. So I conclude I could get other information of Apprenti__c and Maitre_d_apprentissage__c from the Contact Table following the same principle. So I added to my query Apprenti__r.Date_de_naissance__c and Maitre_d_apprentissage__r.Date_de_naissance__c to get the Date_de_naissance__c field which is in my Contact table.
I see in the results that the query succeeds in getting the information but some values have changed column (lines 6 and 7), you can see the difference between query 1 and query 2. In the first query I only return the Apprenti__r.Date_de_naissance__c and in the second query I return Apprenti__r.Date_de_naissance__c and Maitre_d_apprentissage__r.Date_de_naissance__c
Query 1:
SELECT ApprentiNom__c, ApprentiPrenom__c, Apprenti__r.Date_de_naissance__c, MaitreApprentissageNom1__c, MaitreApprentissagePrenom1__c
FROM Contract
Result 1:
Query 2:
SELECT ApprentiNom__c, ApprentiPrenom__c, Apprenti__r.Date_de_naissance__c, MaitreApprentissageNom1__c, MaitreApprentissagePrenom1__c, Maitre_d_apprentissage__r.Date_de_naissance__c
FROM Contract
Result 2:
I would like to understand from where is coming the problem and how to correct it. Thank you in advance.
It's possible that it's just your query editor displaying stuff incorrectly. You can see it got confused with 2 lookups to Contact table, why there's even a column header "Contact.Date_de_naissance__c" (and why it's there twice). And they aren't shown in the order you requested...
What editor you're using? You could try built-in "Developer Console" or http://workbench.developerforce.com/
What do you need it for? In Apex order of fields won't matter, in REST API query the values fetched via lookup will come as JSON sub-objects so there will always be a way to figure out exactly which value is coming from which relation.
In Dev Console try to run this and check if it solves your fears:
System.debug(JSON.serializePretty([SELECT
ApprentiNom__c, ApprentiPrenom__c,
Apprenti__r.Date_de_naissance__c,
MaitreApprentissageNom1__c, MaitreApprentissagePrenom1__c,
Maitre_d_apprentissage__r.Date_de_naissance__c
FROM Contract]));
Then add Maitre_d_apprentissage__r.LastName to query and see what changed, what stayed as is.
I have 2 column in my table setting
with the following values
KEY VALUE
company ABC
phone 14344
address Somerset City
I need to display this like a single record or a flatten
array in the view/blade page
something like
{{$sett->company}}
{{$sett->phone}}
or an array with lookup
{{$myarray('company')}}
{{$myarray('phone')}}
The idea is if I add another settings like contact us email address
for my website I don't want to add another column.
I know this is achievable in controller by creating different variable
and executing different query but I'm kind of looking for some options here.
Thanks for the help really appreciated.
You can use $settings->pluck('value', 'key') to get your result. Read more here: https://laravel.com/docs/5.4/collections#method-pluck
I'm trying to get a list of collaboration groups and their associated members. I'm trying to do the following soql query but it does not recognise the CollaborationGroup.CollaborationGroupMembers relationship
List<CollaborationGroup> cgs = new List<CollaborationGroup>([Select OwnerId, Id, (select CollaborationGroupMember.MemberId from CollaborationGroup.CollaborationGroupMembers) From CollaborationGroup]);
Looking at the API, CollaborationGroupMembers has a CollaborationGroupId which is the ID of the associated CollaborationGroup, so the relationship should exist - can anyone tell me why it's not working?
Thanks
J
edit: I have figured this out the other way round (going from member to group (child to parent) rather than vice-versa) by doing the following:
List<CollaborationGroupMember> cgs = new List<CollaborationGroupMember>([select MemberId, CollaborationGroupMember.CollaborationGroup.OwnerId from CollaborationGroupMember where CollaborationGroupMember.CollaborationGroup.Name]);
However, I'd still like to know why I couldn't do it from parent to child as I was trying to in the first place?
Thanks
As per the documentation here, it's not having a relation from CollabarationGroup into CollabarationGroupMember. But as you have mentioned, it's having the relation in the otherway around, see this. So if you need to collect members from a particular group you can try
SELECT MemberId FROM CollaborationGroupMember WHERE CollaborationGroupId='your_group_id'
or filter it from CollaborationGroup.Name as you are already doing.
To all salesforce experts i need some assistance. I have my contacts and a custom object named programs. I created a junction object using to master detail relationships with contacts and programs. I want to avoid relating the same contact to the same program. I tried triggers but I couldn't create the testing part to use it outside sandbox.
I went back to the basics and created a Unique text field. I tried to use default value but EVERYTHING i write in that crap is wrong -_-. I tried Contact__r.Email & "-" & Program__r.Name but to no avail.
I tried workflow rules with a field update but my field update NEVER runs.(Yes I did activate the workflow rule) and I didn't know what to write in my rule's code.
The workflow firing condition could be simply a formula that says true. Alternatively use "every time record is inserted". It also depends whether your master-details are set once and that's it or they will be "reparentable" (option introduced in Summer '12 I think). Maybe post a screenshot / text description of your firing condition? Also - is your unique field set to "case sensitive"?
As for the formula to populate the unique field - something like Contact__c + ' ' + Program__c (or whatever the API names of your fields are) should be OK. Don't use Contact__r.Email etc as these don't have to be unique...
You'll have to somehow fill in the uniqueness criteria for all existing records (maybe that's why you claimed it doesn't work?). If you can use Apex for data fixes - something like this should get you started.
List<Junction__c> junctions = [SELECT Contact__c, Program__c
FROM Junction__c
WHERE Unique_Text_Field__c = null
LIMIT 10000];
for(Junction__c j : junctions){
String key = String.valueOf(j.Contact__c).left(15) + ' ' + String.valueOf(j.Program__c).left(15);
j.Unique_Text_Field__c = key;
}
update junctions;
Keep rerunning it until it starts to show 0 rows processed. The Ids are cut down to 15 chars because in Apex you'd usually see full 18-char Id but workflows use 15-char versions.
This is an APEX code related question and is specific to a VisualForce controller class.
Question
I am trying to update a record with a known AccountId. However, when I set the ID in the sObject declaration SalesForce is appending the string "IAR" to the end of the ID!
Can someone please let me know what I am doing that is wrong and if I am going about this in the wrong way than what is the correct way to update a record from a custom method, outside of quicksave() or update().
Description
So basically, the user will come to this page with the id encoded and it will either have an id or a level. This is handled by the function decode() which takes a string; "id" / "level". I then create an Account variable "acc" which will be used to store all of the Account information before we insert or update it with the statement "insert acc;". Since, I cannot set the ID for "acc" with "acc.id = salesForceID" I have decided to set it when "acc" is created. The following APEX code occurs in the constructor when it is declaring the "acc" variable.
URL Variable Passed
/application?id=001Q000000OognA
APEX Controller Class (Abridged)
salesForceID = decode('id');
debug1 = 'salesForceID: ' + salesForceID;
acc = new Account(id = salesForceID);
debug2 = 'Account ID: ' + acc.id;
Debug Output
salesForceID: 001Q000000OognA
Account ID: 001Q000000OognAIAR
Comments
I apologise for the brevity of the code given, this is for security reasons. I am basically trying to set the ID of the acc before I insert/upsert/update it. I appreciate any explanations for why it could be appending "IAR" and or any alternate ways to update a record given an input AccountId. I do understand that if you pass the id in as a URL variable that SalesForce will automatically do this for you. However, I am passing more than one variable to the page as there are three separate use cases.
Thanks for your help.
001Q000000OognA is the "standard" 15-character Salesforce ID. 15-character ID's are case-sensitive.
001Q000000OognAIAR is the case-insensitive 18-character version of that ID.
Either one is fine. You do not need to worry about the difference. If for some reason you really need to use the 15-character version in parameters etc, you can safely truncate the last 3 digits.
More information here: http://www.salesforce.com/us/developer/docs/api/Content/field_types.htm