Im a first year university student learning how to use makefiles to compile and run my simple program. I set it up as instructed but when i type in "make" it pops up this error:
The term 'make' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
Tried checking the path and uninstalled and reinstalled minGW using the installer. Should i try installing the gcc compiler a different way? Please keep in mind im pretty new to this stuff. Using C btw.
MinGW is just the compiler tools. But usually it comes with mingw32-make.
So you would try that, but the location of the MinGW .exe files you are trying to run must be in the PATH environment variable or it won't find them.
If you want to run make like they do on Linux/Unix I recommend you install MSYS2 shell from https://www.msys2.org/
Quick answer:
Use mingw32-make instead of make after installing mingw
If you don't have "make" command follow steps;
(First, make sure you have installed choco)
Run PowerShell as administrator
choco install make
Related
Everytime I try to build and run a program, including the standard 'Hello world!' nothing happens, I get:
==== Program exited with exit code: 0 ====
Time elapsed: 000:00.000 (MM:SS.MS)
Press any key to continue...
At the bottom it says:
'ming32-make' is not recognized as an internal or external command, operable prgram or batch file.
I have Codelite version 16 on Windows 10. I also have MinGW installed to C: and have edited the Environment variables to include C:\MinGW\bin
However, in command prompt gcc --version shows me the gcc version in C:\Users\me> and not C:\MinGW
I don't know if this is relevant or not.
All the other results seem to suggest a compiler not found problem, but this does not seem to be my case. Thanks in advance.
This is what I have installed at the moment. Can I get 'make'from one of the other files?
The Installed files
Looks like you either don't have ming32-make.exe or it can't be found.
Also I notice you still use old MinGW. I would recommend switching to newer MinGW-w64 (which supports both Windows 32-bit and 64-bit).
The standalone build from https://winlibs.com/ does include ming32-make.exe, and since you can just unzip it (no installation needed) you can try it without removing the old MinGW. Just make sure you don't have anything in your PATH variable to avoid running programs from the wrong location.
ming32-make.exe is either not installed or can't be found on your Environment variable PATH.
No, there is no mingw32-make in that bin folder. When I used the Installer originally I only selected: mingw32-gcc-g++-bin although there were other bin files. Where can I get it?
mingw32-make is outdated.
See How to compile makefile using MinGW?
If you are having problems with mingw, I would recommend using MSYS2 or a package manager like Chocolatey.
Just get rid of the previous installation first. Not mandatory but prevents confusion and storage drain due to multiple copies of mingw.
To install MinGw using chocolatey, run cmd as admin and use
choco install mingw
For make
choco install make
What worked for me was also installing mingw32-base-bin from the Installer (see second option in image in the original question).
The installation tutorial I was following did not mention installing this.
I've decided to leave this here as an answer in case someone else runs into a similar problem.
MSYS is a good option for compilers in recent CodeLite or VS-Code installation. https://www.msys2.org/.
Once you downloaded the compiler using the following steps from the installer but still have the problem with the make then follow these steps:
Reopen the MSYS2 terminal from your windows if that is previously installed.
Run the command pacman -S --needed base-devel mingw-w64-x86_64-toolchain
You will be asked to select the option from the list. You should select the option which refers to mingw-w64-x86_64-make.
Once the installation is successfully done, then open CodeLite settings->Buid Settings and check your Make file location. If that is empty or showing an unknown location then click the three dots at the very right of that box. The browse and navigate to location or where you installed the make by pacman. In my case it is C:/msys64/usr/bin/make.exe.
Click Apply and Save.
Now it might be needed to create a fresh workspace and re-run your code.
I am very new to coding (trying to teach myself C). I have some experience with MatLab, but I understand it is very different from C. I have Windows 10 with the newest version of Visual Studio Code (VSC) with the Run Code Extension and git extension (not sure what git does, but VSC prompted me to install). I am now familiar with the text editor, but do not know how to compile/run my code (apologies if I'm butchering the terminology, again, a newby). One friend recommended I determine the location in which the desired text file is located, type "gcc filename.c", enter, type "./a.out", and then the program should run. (Said friend has a Mac and I supposed the execution commands are different?) Regardless, I encountered "Run Code" extension on my google adventures and follow the steps I've seen online, but I am still getting the error pictured.
I can see how this would be an especially basic question, but if anyone can offer assistance/advice, I would be extremely grateful!
Thanks, All.
Sandy
P.S. In case the image doesn't load/work for whatever reason, this is the error:
"'gcc' is not recognized as an internal or external command,
operable program or batch file."
Works perfect in Visual Code. You need the following:
C/C++ extension in Visual Code.
msys64 installed in C:\
Add path to msys64 bin folder in environment variable
Instructions:
https://marketplace.visualstudio.com/items?itemName=ms-vscode.cpptools
Important the msys64 path doesn't contain spaces so don't install it in Program Files.
You can search "Edit system environment variables" from the windows button, press button Environment Variables, and then add it as a System variable "Path". For me its located in
C:\msys64\mingw64\bin
Hey,,,
It will work for you I believe
Blockquote
First: open the link: https://www.msys2.org/
Go to the installation and download the installer .. install the exe file.
search mingw in windows search(windows start)
there is an app named--> MSYS2 MinGW {64/32}-bit
run it as administrator
Found command shell ---> type: pacman -Syu
Will ask you for some installation click on Y
Then again go to the same app MSYS2 MinGW {64/32}-bit and run as admin
and write--> pacman -Ss gcc (in shell that opend after click)
after clicking there will be bunch of things and now you have to care about your windows arch.. if it is 64 bit then write---> pacman -S mingw-w64-x86_64-gcc (and if its 32 you will find something like that where 64 will replaced by 32 in bunch of commands that are showing in your shell)
after executing this command gcc will be installed in your system to check write: gcc --version || g++ --version
After that to install the debugger write pacman -S mingw-w64-x86_64-gdb
to check write: gdb --version
**Every thing got installed in your system now find the mingW file or mysys2 file on C drive(whereever you r mingW file got saved) go the the minGW 64 || 32 accroding to your operating system there is a bin folder click on that and copy the path inside the bin folder and save it in environment variables path **
Blockquote
Enjoy vs code
My recommendation
You are on Windows right? So you can just install Visual Studio IDE (follow this tutorial). Which is better than vs code. This tutorial is for C++ but it works for C as well. Because C++ uses the same compiler as C but with some more things(simple explanation).
The solution for your problem
You are getting the massage 'gcc' is not recognized as an internal or external command, operable program or batch file because you do not have the gcc compiler installed on your computer. But if you want to install it, you can follow this tutorial. But I highly recommend you use Visual Studio IDE which I mentioned above.
Type gcc --version in the command prompt to check whether the C compiler is installed in your machine.
If it is installed then try adding gcc to the environment variables using this link:
https://www.youtube.com/watch?v=qLh84CmdBJ0
If it is not installed then install it using instructions using this link:
https://www.guru99.com/c-gcc-install.html
and then add it to the environment variables using the link above.
If it is installed and not recognized by VSCode then try to run VSCode from CMD by typing code in CMD.
I worked on GIS project and i need 64 bit gis lib.And than;
What did i?
I download lzo-2.10 file.
I run visual studio 2015 64x command prompt
cd C:\Users\user\Desktop\lzo-2.10
./configure
and ı got some error like that:
'.' is not recognized as an internal or external command,
operable program or batch file.
INSTALL.txt which include lzo-2.10 said that:
The simplest way to compile this package is:
cd' to the directory containing the package's source code and type
./configure' to configure the package for your system. If you're
using csh' on an old version of System V, you might need to type
sh ./configure' instead to prevent csh' from trying to execute
configure' itself.
Running `configure' takes awhile. While running, it prints some
messages telling which features it is checking for.
Type `make' to compile the package.
Optionally, type `make check' to run any self-tests that come with
the package.
Type `make install' to install the programs and any data files and
documentation.
You can remove the program binaries and object files from the
source code directory by typing make clean'. To also remove the
files thatconfigure' created (so you can compile the package for
a different kind of computer), type make distclean'. There is
also amake maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
But I even couldn't first step. I searched but couldn't fix this situation.pls help me.
It looks like your GIS library require linux to be build. Given that you use VS2015 I assume you work on Windows instead.
I have the MinGW install previously working fine with MSYS. They are installed properly and functioning just well.
I installed the PortAudio library and did the install and got the success message after:
./configure
make
make install
When I try to compile samples:
c:\c>gcc patest_mono.c -o pa.exe
patest_mono.c:50:23: fatal error: portaudio.h: No such file or directory
#include "portaudio.h"
^
compilation terminated.
I'm new. I have a feeling I might be doing something fundamentally wrong with the way I'm trying to create the exe from compiling. It's been somewhat of a puzzle quest so far, but I've tried to figure it out and think I am close but completely missing something.
PATH variable ?
In the PortAudio MinGW build instructions I noticed
"The above should create a working version though you might want to
provide '–prefix=<path-to-install-dir>' to configure. "
I've tried adding C:\MingW\PortAudio into the user path. Doesn't work.
I've also tried running the commands in Bash and they come back with an error message "No Rule to make target 'paexpink'" either with the make command, and with gcc .c -o .exe I just get the same error message as compiling straight from the cmd prompt.
I found another source on stack overflow thread with no answers, but the user had commented that http://www.lfd.uci.edu/~gohlke/pythonlibs/#pyaudio provided them a solution but I tried installing the 5 cpython binaries and under the assumption I did it right, it didn't work either.
Thanks for your help,
Julian
To build and install portaudio, you need to add -prefix=/c/<"path to base of the MinGW directory"> to the ./configure line.
For example: ./configure -prefix=/c/MinGW/
then continue the installation by doing
make
After that, do the
make install
and that should install the portaudio files into MinGW.
After it has finished installing, you need to add -lportaudio to the compile command whenever you compile any programs that you want to use PortAudio in.
For example: gcc -o test test.c -lportaudio
I just figured out how to do this today, so I may have accidentally forgotten a few steps.
I have installed the lcc compiler so that I can compile c programs on my windows machine - but I am having troubles getting it to work...
I added C:\lcc\bin to my PATH environment variable, but when I type in:
lcc args
into my command line, I get this message: 'lcc is not recognized as an internal or external command, operable program or batch file'.
If I actually navigate to the folder C:\lcc\bin, I can execute lcc no problem
Is there something else I have to do other than set the PATH variable?
thanks!
I had also problems using lcc. By accident I started the editor that was also included in the package. Since then it works. I notice that I have to perform this operation each time I install it on a new computer. I suppose that it has to do with some initialization files that are required, but only created by the editor. Maybe this will also helps you.