I've been trying to make a Server command in which it would show you some information about a server, and that includes the server owner. But when the owner's offline it throws an error, and instead of that I want it to say "Not Found" in the embed. The code I tried seems to be completely wrong from what I've seen online:
let owner = message.guild.owner;
if(!owner) let owner = 'Not Found';
Uh... Yeah. I would like to know how I can set a different value to something depending on, in this case, if the owner is online/found.
This can be done like this:
let owner = message.guild.owner;
if(!owner) owner = 'Not Found';
owner is now visible in your whole command code. To change it when there is no owner you can just use the name of the variable and set a new value for it.
Related
I want to get incremental changes from Active Directory using C# and for that I am trying to build a solution as mentioned in the following article (using DirSync Control).
https://learn.microsoft.com/en-us/windows/win32/ad/polling-for-changes-using-the-dirsync-control
However, I am facing following problems:
When using following code, I am getting exception that The user has insufficient access rights. The user is part of administrators group.
What more permission needs to be given to that account? And how?
LdapConnection connection = new LdapConnection("adfs.fed.zzz.com");
connection.SessionOptions.ProtocolVersion = 3;
connection.Credential = new System.Net.NetworkCredential("adfsfed\\username", "password");
connection.AuthType = AuthType.Basic;
connection.Bind();
var filter = "(&(objectClass=*))";
var searchRequest = new SearchRequest("", filter, SearchScope.Subtree, properties);
DirSyncRequestControl dirSyncRC = new DirSyncRequestControl(null, DirectorySynchronizationOptions.None);
searchRequest.Controls.Add(dirSyncRC);
var response = connection.SendRequest(searchRequest) as SearchResponse;
If I am using below code, then I am not getting any exception but getting empty result in cookie.
String[] properties = { "objectGUID", "sAMAccountName", "displayName", "mail", "member" };
String filter = "(|(objectClass=group)(objectClass=user))";
DirectorySearcher directorySearcher = new DirectorySearcher(myLdapConnection, filter, properties);
var dSynch = new DirectorySynchronization(System.DirectoryServices.DirectorySynchronizationOptions.None);
directorySearcher.DirectorySynchronization = dSynch;
directorySearcher.SearchScope = System.DirectoryServices.SearchScope.Subtree;
var results = directorySearcher.FindAll();
var cookie = dSynch.GetDirectorySynchronizationCookie();
Considerations:
I have only one Domain Controller
I am system admin. So, I can assign appropriate permissions to the user.
Please help.
• Your user ID will need the "Replicating Directory Changes" permission and should be a member of ‘Domain Administrators’ group to use the DirSync LDAP control extension. But please note that it pretty much can read anything in the directory partition, regardless of standard permissions. Though they cannot change anything.
However - you may have some attributes that are sensitive in your directory. Please refer the powershell script in the below link and execute it with the user ID after giving appropriate permissions using C#. It is a dirsync code that will retrieve even attributes like ‘userAccountControl, userparameters, msexchuseraccountcontrol, pwdlastset, unicodePwd (BLANK, So no hashed domain password is returned), lockouttime, accountexpires, unixuserpassword(Its Hash is returned).
http://dloder.blogspot.com/2012/01/powershell-dirsync-sample.html
Based on the response given by #KartikBhiwapurkar-MT, I figured out the bug.
The error The user has insufficient access rights is completely misleading (User had already Replicating Directory Changes rights and was part of Domain Administrators group). The error was happening in System.DirectoryServices.Protocols is that I was passing out "" as first parameter (distinguishedName)
new SearchRequest("", filter, SearchScope.Subtree, properties);
but it should have been passed as
new SearchRequest("DC=adfs,DC=fed,DC=zzz,DC=com", filter, SearchScope.Subtree, properties);
I was getting empty cookie in System.DirectoryServices because of bug in latest nuget package (6.0.0). At the time of writing this answer, the bug is still open.
Reference to bug
I need to send an email notification to the record owner and manager once the opportunity is closed-won.
adding only owner email works fine
adding only manager email works fine
But if I add both together with coma, {!$Record.Owner.Email},{!$Record.Engagement_Manager__r.Email} I'm getting error.
what is the correct way to add it?
You can try creating a Formula Resource in your flow like this but, in your case, using $Record.Owner.Email and $Record.Engagement_Manager__r.Email:
Then, you can use this Resource in your Email Action:
Try the below code and let me know if it works.
global class SendPurchaseOrderEmail {
WebService static void sendEmail(String poId) {
List<Messaging.SingleEmailMessage> emails = new List<Messaging.SingleEmailMessage>();
String theTemplate = [SELECT Id FROM EmailTemplate WHERE DeveloperName = 'Purchase_Order_With_Items'].Id;
User theUser = [SELECT Id FROM User WHERE Name = 'user name goes here'];
Messaging.SingleEmailMessage mail = new Messaging.SingleEmailMessage();
mail.setSaveAsActivity(false);
mail.setTemplateId(theTemplate);
mail.setWhatId(poId);
mail.setTargetObjectId(theUser.Id);
mail.setToAddresses(new String[] { 'TestUser#salesforce.com' ,'abc#test.com'}); //add other emails here.
emails.add(mail);
Messaging.sendEmail(emails);
}
}
Please refer below link for more details.
https://developer.salesforce.com/docs/atlas.en-us.api.meta/api/sforce_api_calls_sendemail.htm
This is because you have to pass a direct email address there.
Instead of that, you can create a collection variable, store the emails into it, then pass that variable to email addresses (collection) field.
Note: you can only store upto 5 emails into that colllection variable at a time.
Hi For that you can simply add collection Variable.
For that variable assign multiple values to it. So that you can send email to both record owner as well as manager.
From New Resource Select the Variable and click Allow Multiple Values and Data-type as text.
Then by using Assignment. Add the following email Address to it Please refer the below image.
I hope you have got the solution
Thanks
So what I would like to do is allow my bot to do different commands based on the server. For example, if I am in one server and type !rules it would show the rules for just that server and if I go into another server it shows other rules.
You can access the id of a guild when a message is sent by message.guild.id. After that you can access the guild object and do a lot with it by bot.guilds.get(id) or client.guilds.get(id)
So now you can start defining some variables in your actual code
/* Assuming you have a variable called cmd that stores the command called */
if (cmd === 'RULES') {
let guildId = message.guild.id;
let guild = bot.guilds.get(guildId); // or replace with client
// Rest of your code
}
You just need to compare Guild#id to the guilds ID. Then you can handle the command differently for each guild.
I used the example in this page to add a user to an Active Directory group, but I get an exception with the message "Server is unwilling to process the request" when executing
dirEntry.Properties["member"].Add(userDn);
I had a similar issue where I was trying to add a member to a group. Specifically trying to add a group to a group and getting the same helpful error 'The server is unwilling to process the request' The answer provided by the OP did not work for me.
For me, the reason I was unable to add a group to my group was because the group I was trying to add members to was a 'global' scoped group whereas it needed to be a 'universal' scoped group. Hope this helps someone.
This question took me a lot of time to solve. First of all, the error message looks like a joke. Second, there is nothing more, just that message.
Anyway, I managed to fix it by:
Making sure that userDn contains the whole path (e.g., "LDAP://server-address/CN=" + userDn + ",OU=optional,DC=your-domain,DC=com". This is actually very important, if you don't supply the full path it will throw an Exception from HRESULT: 0x80005000.
Replacing dirEntry.Properties["member"].Add(userDn); by entry.Invoke("Add", new object[] { userDn });
Then I wanted to remove a user and I expected entry.Invoke("Remove", new object[] { userDn }); to work. However, this devilish AD will only work if you use lower case "remove", so entry.Invoke("remove", new object[] { userDn }); worked for me.
I got this generic error message when my path did not match the forest domain name. For example, if my forest domain name is ad.example.com, and I am trying to create a group with path CN=Users,DC=example,DC=net one has .com the other has .net - they don't line up. I would need to correct my group to match. My group path should then be CN=Users,DC=example,DC=com.
ldapwiki.com describes potential causes for "The server is unwilling to process the request". Check ExtendedErrorMessage property of your exception to figure out what applies. In my case "00002145: SvcErr: DSID-031A1254, problem 5003 (WILL_NOT_PERFORM)". The following line resolved the issue:
ent.Properties["groupType"].Value = 8;
I had missed to set groupType and so attempted to nest a universal group in a global group. Find more information on groupType attribute in ldapwiki.com
Just look out, because the start of the .properties("distinguished Name") can be different than the .properties("cn"). If the user is created with a , or ; in the .properties("cn"), the start of the .properties("distinguished Name") will be the username with \, or \;.
This can give an error if u are trying to add a user you found by use of .properties("cn") to a Group.
After many days searching i find the problem. when you add user in group you must set "distinguished Name" not LDAP path.
You must write like this:
ent.Properties["member"].Add("CN=YourUserName,OU=optional,DC=yourdomain,DC=com");
This is wrong code:
ent.Properties["member"].Add("LDAP://CN=YourUserName,OU=optional,DC=yourdomain,DC=com");
Also when you do remove mast to save this rule
ent.Properties["member"].Remove("CN=YourUserName,OU=optional,DC=yourdomain,DC=com");
P.S. ent is DirectoryEntry object of group
I am using PowerBuilder PFC library to login to the database.
n_cst_appmanager/ pfc_open:
IF this.of_LogonDlg() > 0 THEN
Open(w_myapp_frame)
END IF
n_cst_appmanager/ pfc_logon:
SQLCA.DBMS = "ODBC"
SQLCA.AutoCommit = False
SQLCA.DBParm = "ConnectString='DSN=mytestdb;UID=" + as_userid + ";PWD=" + as_password + "'"
connect using SQLCA;
Now, once the user is logged in, there are few situations that I will need to connect to another database (for example, to copy some data there), so I would like to connect to the other database automatically, without displaying the login window again, therefore I would need to save the username and password of the user.
How can I save it? Do I need to save in the registry? Can you give some example please?
For example, I can get the user id in following way:
s_userid = gnv_app.of_GetUserID()
But I can not get the password. Can someone please help me how i can do it? Thanks a lot.
Actually, now that I'm paying attention to what you need instead of what you asked for <g>, and riffing off of Hugh's answer, why not just copy the transaction object?
n_cst_String lnv_String
ltr_NewConnect.DBMS = SQLCA.DBMS
ltr_NewConnect.AutoCommit = SQLCA.AutoCommit
ltr_NewConnect.DBParm = lnv_String.of_GlobalReplace (SQLCA.DBParm, "mytestdb", "myotherdb")
If I were doing this, I'd code a copy of all the transaction object fields, just in case the means of defining the connection changes.
I'm assuming the other database is the same type of database in order for this to make sense (so that it uses the same type of DBParm), but either way the principle may apply.
Good luck,
Terry.
There's nothing built into PFC and there's nothing automagic in PowerBuilder that will help you with this. Just create an instance variable and a function to access it. Maybe grab the n_cst_LogonAttrib from the Message.PowerObjectParm immediately after the call to of_LogonDlg() and grab the value from there. Or, further extend your n_cst_AppManager.pfc_Logon event. Or extend of_LogonDlg(), and model the capture after the way PFC does the user id.
Note that storing the password anywhere permanent and visible to other processes like the registry would be a security violation that many companies would not allow. Not a direction you want to go.
Good luck,
Terry.
You can parse them out of SQLCA.DBParm.
string ls_userID, ls_password
n_cst_string stringSrv
ls_userID = stringSrv.of_getKeyValue(SQLCA.DBParm, "UID", ";")
ls_password = stringSrv.of_getKeyValue(SQLCA.DBParm, "PWD", ";")
However, a good case can be made for capturing them in the appmanager if you know you will need them.
Having the same login credentials for different databases is a security concern. It's the sort of thing that leads to your company being in the news for the wrong reasons.