Using:
set -o nounset
Having an indexed array like:
myArray=( "red" "black" "blue" )
What is the shortest way to check if element 1 is set?
I sometimes use the following:
test "${#myArray[#]}" -gt "1" && echo "1 exists" || echo "1 doesn't exist"
I would like to know if there's a preferred one.
How to deal with non-consecutive indexes?
myArray=()
myArray[12]="red"
myArray[51]="black"
myArray[129]="blue"
How to quick check that 51 is already set for example?
How to deal with associative arrays?
declare -A myArray
myArray["key1"]="red"
myArray["key2"]="black"
myArray["key3"]="blue"
How to quick check that key2 is already used for example?
To check if the element is set (applies to both indexed and associative array)
[ "${array[key]+abc}" ] && echo "exists"
Basically what ${array[key]+abc} does is
if array[key] is set, return abc
if array[key] is not set, return nothing
References:
See Parameter Expansion in Bash manual and the little note
if the colon is omitted, the operator tests only for existence [of parameter]
This answer is actually adapted from the answers for this SO question: How to tell if a string is not defined in a bash shell script?
A wrapper function:
exists(){
if [ "$2" != in ]; then
echo "Incorrect usage."
echo "Correct usage: exists {key} in {array}"
return
fi
eval '[ ${'$3'[$1]+muahaha} ]'
}
For example
if ! exists key in array; then echo "No such array element"; fi
From man bash, conditional expressions:
-v varname
True if the shell variable varname is set (has been assigned a value).
example:
declare -A foo
foo[bar]="this is bar"
foo[baz]=""
if [[ -v "foo[bar]" ]] ; then
echo "foo[bar] is set"
fi
if [[ -v "foo[baz]" ]] ; then
echo "foo[baz] is set"
fi
if [[ -v "foo[quux]" ]] ; then
echo "foo[quux] is set"
fi
This will show that both foo[bar] and foo[baz] are set (even though the latter is set to an empty value) and foo[quux] is not.
New answer
From version 4.2 of bash (and newer), there is a new -v option to built-in test command.
From version 4.3, this test could address element of arrays.
array=([12]="red" [51]="black" [129]="blue")
for i in 10 12 30 {50..52} {128..131};do
if [ -v 'array[i]' ];then
echo "Variable 'array[$i]' is defined"
else
echo "Variable 'array[$i]' not exist"
fi
done
Variable 'array[10]' not exist
Variable 'array[12]' is defined
Variable 'array[30]' not exist
Variable 'array[50]' not exist
Variable 'array[51]' is defined
Variable 'array[52]' not exist
Variable 'array[128]' not exist
Variable 'array[129]' is defined
Variable 'array[130]' not exist
Variable 'array[131]' not exist
Note: regarding ssc's comment, I've single quoted 'array[i]' in -v test, in order to satisfy shellcheck's error SC2208. This seem not really required here, because there is no glob character in array[i], anyway...
This work with associative arrays in same way:
declare -A aArray=([foo]="bar" [bar]="baz" [baz]=$'Hello world\041')
for i in alpha bar baz dummy foo test;do
if [ -v 'aArray[$i]' ];then
echo "Variable 'aArray[$i]' is defined"
else
echo "Variable 'aArray[$i]' not exist"
fi
done
Variable 'aArray[alpha]' not exist
Variable 'aArray[bar]' is defined
Variable 'aArray[baz]' is defined
Variable 'aArray[dummy]' not exist
Variable 'aArray[foo]' is defined
Variable 'aArray[test]' not exist
With a little difference:In regular arrays, variable between brackets ([i]) is integer, so dollar symbol ($) is not required, but for associative array, as key is a word, $ is required ([$i])!
Old answer for bash prior to V4.2
Unfortunately, bash give no way to make difference betwen empty and undefined variable.
But there is some ways:
$ array=()
$ array[12]="red"
$ array[51]="black"
$ array[129]="blue"
$ echo ${array[#]}
red black blue
$ echo ${!array[#]}
12 51 129
$ echo "${#array[#]}"
3
$ printf "%s\n" ${!array[#]}|grep -q ^51$ && echo 51 exist
51 exist
$ printf "%s\n" ${!array[#]}|grep -q ^52$ && echo 52 exist
(give no answer)
And for associative array, you could use the same:
$ unset array
$ declare -A array
$ array["key1"]="red"
$ array["key2"]="black"
$ array["key3"]="blue"
$ echo ${array[#]}
blue black red
$ echo ${!array[#]}
key3 key2 key1
$ echo ${#array[#]}
3
$ set | grep ^array=
array=([key3]="blue" [key2]="black" [key1]="red" )
$ printf "%s\n" ${!array[#]}|grep -q ^key2$ && echo key2 exist || echo key2 not exist
key2 exist
$ printf "%s\n" ${!array[#]}|grep -q ^key5$ && echo key5 exist || echo key5 not exist
key5 not exist
You could do the job without the need of externals tools (no printf|grep as pure bash), and why not, build checkIfExist() as a new bash function:
$ checkIfExist() {
eval 'local keys=${!'$1'[#]}';
eval "case '$2' in
${keys// /|}) return 0 ;;
* ) return 1 ;;
esac";
}
$ checkIfExist array key2 && echo exist || echo don\'t
exist
$ checkIfExist array key5 && echo exist || echo don\'t
don't
or even create a new getIfExist bash function that return the desired value and exit with false result-code if desired value not exist:
$ getIfExist() {
eval 'local keys=${!'$1'[#]}';
eval "case '$2' in
${keys// /|}) echo \${$1[$2]};return 0 ;;
* ) return 1 ;;
esac";
}
$ getIfExist array key1
red
$ echo $?
0
$ # now with an empty defined value
$ array["key4"]=""
$ getIfExist array key4
$ echo $?
0
$ getIfExist array key5
$ echo $?
1
What about a -n test and the :- operator?
For example, this script:
#!/usr/bin/env bash
set -e
set -u
declare -A sample
sample["ABC"]=2
sample["DEF"]=3
if [[ -n "${sample['ABC']:-}" ]]; then
echo "ABC is set"
fi
if [[ -n "${sample['DEF']:-}" ]]; then
echo "DEF is set"
fi
if [[ -n "${sample['GHI']:-}" ]]; then
echo "GHI is set"
fi
Prints:
ABC is set
DEF is set
tested in bash 4.3.39(1)-release
declare -A fmap
fmap['foo']="boo"
key='foo'
# should echo foo is set to 'boo'
if [[ -z "${fmap[${key}]}" ]]; then echo "$key is unset in fmap"; else echo "${key} is set to '${fmap[${key}]}'"; fi
key='blah'
# should echo blah is unset in fmap
if [[ -z "${fmap[${key}]}" ]]; then echo "$key is unset in fmap"; else echo "${key} is set to '${fmap[${key}]}'"; fi
Reiterating this from Thamme:
[[ ${array[key]+Y} ]] && echo Y || echo N
This tests if the variable/array element exists, including if it is set to a null value. This works with a wider range of bash versions than -v and doesn't appear sensitive to things like set -u. If you see a "bad array subscript" using this method please post an example.
This is the easiest way I found for scripts.
<search> is the string you want to find, ASSOC_ARRAY the name of the variable holding your associative array.
Dependign on what you want to achieve:
key exists:
if grep -qe "<search>" <(echo "${!ASSOC_ARRAY[#]}"); then echo key is present; fi
key exists not:
if ! grep -qe "<search>" <(echo "${!ASSOC_ARRAY[#]}"); then echo key not present; fi
value exists:
if grep -qe "<search>" <(echo "${ASSOC_ARRAY[#]}"); then echo value is present; fi
value exists not:
if ! grep -qe "<search>" <(echo "${ASSOC_ARRAY[#]}"); then echo value not present; fi
I wrote a function to check if a key exists in an array in Bash:
# Check if array key exists
# Usage: array_key_exists $array_name $key
# Returns: 0 = key exists, 1 = key does NOT exist
function array_key_exists() {
local _array_name="$1"
local _key="$2"
local _cmd='echo ${!'$_array_name'[#]}'
local _array_keys=($(eval $_cmd))
local _key_exists=$(echo " ${_array_keys[#]} " | grep " $_key " &>/dev/null; echo $?)
[[ "$_key_exists" = "0" ]] && return 0 || return 1
}
Example
declare -A my_array
my_array['foo']="bar"
if [[ "$(array_key_exists 'my_array' 'foo'; echo $?)" = "0" ]]; then
echo "OK"
else
echo "ERROR"
fi
Tested with GNU bash, version 4.1.5(1)-release (i486-pc-linux-gnu)
For all time people, once and for all.
There's a "clean code" long way, and there is a shorter, more concise, bash centered way.
$1 = The index or key you are looking for.
$2 = The array / map passed in by reference.
function hasKey ()
{
local -r needle="${1:?}"
local -nr haystack=${2:?}
for key in "${!haystack[#]}"; do
if [[ $key == $needle ]] ;
return 0
fi
done
return 1
}
A linear search can be replaced by a binary search, which would perform better with larger data sets. Simply count and sort the keys first, then do a classic binary halving of of the haystack as you get closer and closer to the answer.
Now, for the purist out there that is like "No, I want the more performant version because I may have to deal with large arrays in bash," lets look at a more bash centered solution, but one that maintains clean code and the flexibility to deal with arrays or maps.
function hasKey ()
{
local -r needle="${1:?}"
local -nr haystack=${2:?}
[ -n ${haystack["$needle"]+found} ]
}
The line [ -n ${haystack["$needle"]+found} ]uses the ${parameter+word} form of bash variable expansion, not the ${parameter:+word} form, which attempts to test the value of a key, too, which is not the matter at hand.
Usage
local -A person=(firstname Anthony lastname Rutledge)
if hasMapKey "firstname" person; then
# Do something
fi
When not performing substring expansion, using the form described
below (e.g., ‘:-’), Bash tests for a parameter that is unset or null.
Omitting the colon results in a test only for a parameter that is
unset. Put another way, if the colon is included, the operator tests
for both parameter’s existence and that its value is not null; if the
colon is omitted, the operator tests only for existence.
${parameter:-word}
If parameter is unset or null, the expansion of word is substituted. Otherwise, the value of parameter is substituted.
${parameter:=word}
If parameter is unset or null, the expansion of word is assigned to parameter. The value of parameter is then substituted. Positional
parameters and special parameters may not be assigned to in this way.
${parameter:?word}
If parameter is null or unset, the expansion of word (or a message to that effect if word is not present) is written to the standard
error and the shell, if it is not interactive, exits. Otherwise, the
value of parameter is substituted. ${parameter:+word}
If parameter is null or unset, nothing is substituted, otherwise the expansion of word is substituted.
https://www.gnu.org/savannah-checkouts/gnu/bash/manual/bash.html#Shell-Parameter-Expansion
If $needle does not exist expand to nothing, otherwise expand to the non-zero length string, "found". This will make the -n test succeed if the $needle in fact does exist (as I say "found"), and fail otherwise.
Both in the case of arrays and hash maps I find the easiest and more straightforward solution is to use the matching operator =~.
For arrays:
myArray=("red" "black" "blue")
if [[ " ${myArray[#]} " =~ " blue " ]]; then
echo "blue exists in myArray"
else
echo "blue does not exist in myArray"
fi
NOTE: The spaces around the array guarantee the first and last element can match. The spaces around the value guarantee an exact match.
For hash maps, it's actually the same solution since printing a hash map as a string gives you a list of its values.
declare -A myMap
myMap=(
["key1"]="red"
["key2"]="black"
["key3"]="blue"
)
if [[ " ${myMap[#]} " =~ " blue " ]]; then
echo "blue exists in myMap"
else
echo "blue does not exist in myMap"
fi
But what if you would like to check whether a key exists in a hash map? In the case you can use the ! operator which gives you the list of keys in a hash map.
if [[ " ${!myMap[#]} " =~ " key3 " ]]; then
echo "key3 exists in myMap"
else
echo "key3 does not exist in myMap"
fi
I get bad array subscript error when the key I'm checking is not set. So, I wrote a function that loops over the keys:
#!/usr/bin/env bash
declare -A helpList
function get_help(){
target="$1"
for key in "${!helpList[#]}";do
if [[ "$key" == "$target" ]];then
echo "${helpList["$target"]}"
return;
fi
done
}
targetValue="$(get_help command_name)"
if [[ -z "$targetvalue" ]];then
echo "command_name is not set"
fi
It echos the value when it is found & echos nothing when not found. All the other solutions I tried gave me that error.
I have a script that I'll be using in a system where the first three positional parameters are reserved, but I want to pass other parameters to the script to be used as variables. I can set default values for the variables, but if a parameter is included, I want that to take precedence. Here's a very basic script to illustrate:
#!/bin/bash
param1="$1"
param2="$2"
param3="$3"
param4="default4"
if [[ "$param4" == "" ]] && [[ "$4" == "" ]]; then
echo "A value was not specified for parameter 4. Script cannot execute. Exiting..."
exit 1
elif [[ "$4" != "" ]]; then
param4="$4"
else
echo "The built-in value for parameter 4 will be used in the script."
fi
echo "$param1"
echo "$param2"
echo "$param3"
echo "$param4"
If I run script a b c the output I get is:
The built-in value for parameter 4 will be used in the script.
a
b
c
default4
If I run script a b c d then the output is:
a
b
c
d
This is all well and good, but if I have 5-6 different parameters, I don't want to have to repeat the if..fi block that many times for each parameter.
So I've been trying to use a for loop to iterate through the parameters, but I haven't had much luck. The best attempt I came up with was:
#!/bin/bash
param1="$1"
param2="$2"
param3="$3"
param4="default4"
param5="default5"
param6="default6"
param7="default7"
defaultArray=( param4 param5 param6 param7 )
passedArray=( '$4' '$5' '$6' '$7' )
for (( i=0; i<${#defaultArray[#]}; i++ ));
do
if [[ "${defaultArray[$i]}" == "" ]] && [[ "${passedArray[$i]}" == "" ]]; then
echo "A value was not specified for parameter $((i+4)). Script cannot execute. Exiting..."
exit 1
elif [[ "${passedArray[$i]}" != "" ]]; then
eval "${defaultArray[$i]}"='"${passedArray[$i]}"'
else
echo "The built-in value for parameter $((i+4)) will be used in the script."
fi
done
echo "$param1"
echo "$param2"
echo "$param3"
echo "$param4"
echo "$param5"
echo "$param6"
echo "$param7"
But when I run this script a b c, or script a b c d, and whether or not I delete the default values in the script, I always get:
a
b
c
$4
$5
$6
$7
I think this because I needed to single-quote the positional parameter names in passedArray or else they just blank out, but then that hard-codes their names rather than the passed value.
Is there a way of doing this, or does trying to assign a positional parameter to a variable in an array and/or a for loop just not work? The thing I'm going to try next is a function, but I'm not sure that'd work any better...
Change
param4="default4"
if [[ "$param4" == "" ]] && [[ "$4" == "" ]]; then
echo "A value was not specified for parameter 4. Script cannot execute. Exiting..."
exit 1
elif [[ "$4" != "" ]]; then
param4="$4"
else
echo "The built-in value for parameter 4 will be used in the script."
fi
To:
if [[ ! -z $4 ]]; then
param4="$4"
else
param4="default4"
echo "The built-in value for parameter 4 will be used in the script."
fi
In your version of code, the first part of the if condition would never execute because param4 is already set just before if.
A more elegant and consiste way of doing this, given that you are using a default value for param4 anyway is:
param4=${4:-default4} # use default as "default4" unless $4 is set
For the second problem, your suspicion is right - single quotes won't expand the positional variables in the array assignment. So, change it to:
passedArray=( "$4" "$5" "$6" "$7" )
Your loops seems OK, except for this:
elif [[ "${passedArray[$i]}" != "" ]]; then
eval "${defaultArray[$i]}"='"${passedArray[$i]}"'
Why use eval here? You can say:
defaultArray[$i]=${passedArray[$i]}
I want to be able to run my script with one or more arguments and perform an action for all arguments passed.
So far, I have been able to run a command based on the first argument as follows:
#/bin/bash
ap=admin
lp=lender
if [[ "$1" = "ap" ]]; then
echo "### pulling $ap ###"
elif [[ "$1" = "lp" ]]; then
echo "### pulling $lp ###"
else
echo "There is no service with that name"
fi
I want to be able to run my script with more than one argument as follows and run the commands needed for each of the arguments given. For example, if I run this:
./update.sh ap lp
I want to be able to detect both ap and lp and then execute the correct commands.
To summarise, if the person running the script passes 'ap' as the argument, I want to pull admin and if the user passes both 'ap' & 'lp' as the arguments, I want to pull both admin and lender.
Thanks in advance for your help!
Use a while loop to look through the arguments and use shift to move arguments $N+1 to $N. So after a shift the second argument becomes the first.
while [ "$#" -gt 0 ]
do
if [[ $1 = "ap" ]]
then
echo "AP typed"
elif [[ $1 = "lp" ]]
then
echo "LP typed"
fi
shift
done
while [[ $# -gt 0 ]]
do
key="$1"
case $key in
ap)
echo "### pulling $ap ###"
;;
lp)
echo "### pulling $lp ###"
;;
*)
echo "There is no service with that name"
;;
esac
shift
done
this will accept arguments in every order you put them
$ ./update lp ap
$ ./update ap lp
$ ./update lp
$ ./update ap
I am using this code to check one $var if exists in array :
if echo ${myArr[#]} | grep -qw $myVar; then echo "Var exists on array" fi
How could I combine more than one $vars to my check? Something like grep -qw $var1,$var2; then ... fi
Thank you in Advance.
if echo ${myArr[#]} | grep -qw -e "$myVar" -e "$otherVar"
then
echo "Var exists on array"
fi
From the man-page:
-e PATTERN, --regexp=PATTERN
Use PATTERN as the pattern.
This can be used to specify multiple search patterns, or to protect a pattern beginning with a hyphen (-). (-e is specified by POSIX.)
But if you want to use arrays like this you might as well use the bash built-in associative arrays.
To implement and logic:
myVar1=home1
myVar2=home2
myArr[0]=home1
myArr[1]=home2
if echo ${myArr[#]} | grep -qw -e "$myVar1.*$myVar2" -e "$myVar2.*$myVar1"
then
echo "Var exists on array"
fi
# using associative arrays
declare -A assoc
assoc[home1]=1
assoc[home2]=1
if [[ ${assoc[$myVar1]} && ${assoc[$myVar2]} ]]; then
echo "Var exists on array"
fi
Actually you don't need grep for this, Bash is perfectly capable of doing Extended Regular Expressions itself (Bash 3.0 or later).
pattern="$var1|$var2|$var3"
for element in "${myArr[#]}"
do
if [[ $element =~ $pattern ]]
then
echo "$pattern exists in array"
break
fi
done
Something quadratic, but aware of spaces:
myArr=(aa "bb c" ddd)
has_values(){
for e in "${myArr[#]}" ; do
for f ; do
if [ "$e" = "$f" ]; then return 0 ; fi
done
done
return 1
}
if has_values "ee" "bb c" ; then echo yes ; else echo "no" ; fi
this example will print no because "bb c" != "bb c"
Is there a way to test whether an array contains a specified element?
e.g., something like:
array=(one two three)
if [ "one" in ${array} ]; then
...
fi
A for loop will do the trick.
array=(one two three)
for i in "${array[#]}"; do
if [[ "$i" = "one" ]]; then
...
break
fi
done
Try this:
array=(one two three)
if [[ "${array[*]}" =~ "one" ]]; then
echo "'one' is found"
fi
I got an function 'contains' in my .bashrc-file:
contains ()
{
param=$1;
shift;
for elem in "$#";
do
[[ "$param" = "$elem" ]] && return 0;
done;
return 1
}
It works well with an array:
contains on $array && echo hit || echo miss
miss
contains one $array && echo hit || echo miss
hit
contains onex $array && echo hit || echo miss
miss
But doesn't need an array:
contains one four two one zero && echo hit || echo miss
hit
I like using grep for this:
if echo ${array[#]} | grep -qw one; then
# "one" is in the array
...
fi
(Note that both -q and -w are non-standard options to grep: -w tells it to work on whole words only, and -q ("quiet") suppresses all output.)
array="one two three"
if [ $(echo "$array" | grep one | wc -l) -gt 0 ] ;
then echo yes;
fi
If that's ugly, you could hide it away in a function.
if you just want to check whether an element is in array, another approach
case "${array[#]/one/}" in
"${array[#]}" ) echo "not in there";;
*) echo "found ";;
esac
In_array() {
local NEEDLE="$1"
local ELEMENT
shift
for ELEMENT; do
if [ "$ELEMENT" == "$NEEDLE" ]; then
return 0
fi
done
return 1
}
declare -a ARRAY=( "elem1" "elem2" "elem3" )
if In_array "elem1" "${ARRAY[#]}"; then
...
A nice and elegant version of the above.
in_array() {
local needle=$1 el
shift
for el in "$#"; do
if [ "$el" = "$needle" ]; then
return 0
fi
done
return 1
}
if in_array 1 1 2 3; then
echo true
else
echo false
fi
# alternatively
a=(1 2 3)
if in_array 1 "${a[#]}"; then
...
OPTIONS=('-q','-Q','-s','-S')
find="$(grep "\-q" <<< "${OPTIONS[#]}")"
if [ "$find" = "${OPTIONS[#]}" ];
then
echo "arr contains -q"
fi