I'm very newbie with database and I'm trying to use xampp local host database but it gives this error
10:34:15 AM [Apache] Error: Apache shutdown unexpectedly.
10:34:15 AM [Apache] This may be due to a blocked port, missing dependencies,
10:34:15 AM [Apache] improper privileges, a crash, or a shutdown by another method.
10:34:15 AM [Apache] Press the Logs button to view error logs and check
10:34:16 AM [Apache] the Windows Event Viewer for more clues
10:34:16 AM [Apache] If you need more help, copy and post this
10:34:16 AM [Apache] entire log window on the forums
10:45:36 AM [Apache] Uninstalling service...
10:45:38 AM [Apache] There may be an error, return code: 1223 - The operation was canceled by the user.
10:45:38 AM [Apache] Service was NOT (un)installed!
10:45:43 AM [Apache] Problem detected!
10:45:43 AM [Apache] Port 80 in use by "Unable to open process" with PID 4!
10:45:43 AM [Apache] Apache WILL NOT start without the configured ports free!
10:45:43 AM [Apache] You need to uninstall/disable/reconfigure the blocking application
10:45:43 AM [Apache] or reconfigure Apache and the Control Panel to listen on a different port
I googled many solutions but none of them worked if you want to help me I can give you remote of the server please help me
Run CMD as administrator, and run netstat -ano | findstr :80, and then check the output.
Find two lines that are just like this, but obviously the pid will differ:
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 1234
#the fifth output is the pid number.
And run taskkill /F /PID 1234, 1234 is the pid number in this example, it will differ for you probably.
If you can't find the pid number , please post the output of netstat -anb in your question.
OR
I wouldn't risk it, but:
because your question has the statement 10:45:43 AM [Apache] Port 80 in use by "Unable to open process" with PID 4!, you could just run taskkill /F /PID 4.
Related
I know that many methods have already come out as solutions.
However, as you can see in the picture, when I search for port 3000 in 'cmd', the process in use does not appear.
In the case of 8080, it comes out well because the Spring Boot server is running, but in the case of 'React', even if there is no process using port 3000 as shown in the picture, 'Something is already running on port 3000'. is printed out.
enter image description here
I'm using a translator so it might be difficult to understand, but any help would be appreciated.
Have you tried:
Running cmd as admin
Using :3000 instead of 3000
taskkill /PID <PID> /F kills the process, just replace with the PID, to the right of "listening".
If none works, you could just restart the pc.
NOTE: some people have encountered this error even after restarting, but managed to solve the problem with this command: npx kill-port 3000
This means you have launched another instance before... Switching off the computer can work but there is another solution
In windows, just open the Ressource Monitor (Task Manager -> Performance ->Open Ressource Monitor) then open the Listening port and check if 3000 is already running
I am trying to connect from my Windows 10 machine to my Ubuntu Linux server (16.04.6) using Remote SSH.
To do this I've read many different tutorials but have no success.
I am able to connect from my Windows 10 command prompt to the Ubuntu Linux server via ssh without any problems. I even used ssh-keygen to generate a private and a public key and copied the public key to the appropriate directory on the Linux Server (.ssh).
In VsCode I installed the extension Remote-SSH added my host to my configuration file c:\user.ssh\config:
Host <ip-address>
HostName <ip-address>
User <username>
Then I clicked in VSCode the button bottom left "Open a remote Window" and chosed my host. A new windows opens and VSCode is trying to connect. Then I see a window with the error message: "Could not establish connection to . Connection was canceled". This is the log.
[11:53:17.573] Log Level: 2
[11:53:17.582] remote-ssh#0.51.0
[11:53:17.583] win32 x64
[11:53:17.586] SSH Resolver called for "ssh-remote+<ip-address>", attempt 1
[11:53:17.587] SSH Resolver called for host: <ip-address>
[11:53:17.587] Setting up SSH remote "<ip-address>"
[11:53:17.648] Using commit id "5763d909d5f12fe19f215cbfdd29a91c0fa9208a" and quality "stable" for server
[11:53:17.650] Install and start server if needed
[11:53:18.624] getPlatformForHost was canceled
[11:53:18.625] Resolver error: Connecting was canceled
[11:53:18.640] ------
Again, I can connect to the same linux server via ssh from my local machine (Win 10) without any problems.
I've resolved the connection issues; possibly the ssh config was not correctly saved/accessed by VS Code?
I thought I should be able to directly set it up to point to an existing config file, but that didn't seem to work. Instead, I created a new config file in the UI, and over-wrote the contents. Shouldn't be necessary, but seemed to do the trick.
What I did was:
Add new host: => Remote-SSH: Connect to host... => Add New SSH Host...
Type in command: ssh user#host to attempt to connect
Choose platform in the command bar in the new window (Linux in my case)
Verify connected (I needed to change ssh-agent settings to store credentials)
Edit the config location: => Remote-SSH: Connect to host... => Settings
Enter config file under Remote.SSH: Config File (C:\Users\me\.vagrant\machines\default\virtualbox\config in my case)
Modify config file further, as needed
Connect through the UI: Remote-SSH: Connect to host... =>
Hope that helps!
For me it was not starting necessary SSH*. See status services using:
Get-Service SSH* on PowerShell.
I got a time out error on enabling necessary services and this helped.
A colleague of mine was with this problem. We solved just deleting his %USERPROFILE\.ssh\config file, closing VSCode, reopening it, and trying to connect again.
There was some garbage in his ssh config file.
I also found that if the value of the "Host" field includes a ")" character, then there will be an error message as follows and the VSCode keeps trying opening remote:
The terminal process "C:\WINDOWS\System32\cmd.exe /c (type "C:\Users\xxxxx_xxxxx\AppData\Local\Temp\vscode-linux-multi-line-command--ccton_---_---2-705401992.sh" | ssh -T -L 127.0.0.1:53080:/run/user/1000/vscode-ssh-remote-server-sock-1636523090 Accton_AWS_EC)2 bash) & exit /b 0" terminated with exit code: 1.
I tried the following that worked for me:
Click on View > Command Palette (alternatively press CTRL + Shift + P)
Start typing:
Remote SSH: Kill
Click on the first option that says: Remote-SSH: kill VS Code Server on Host...
From the options, click on the server you are having trouble connecting to. This will kill that VScode server.
Now just try to reconnect:
a. View > Command Palette (alternatively press CTRL + Shift + P)
b. Start typing:
SSH Remote-SSH: Connect to host...
c. Select the server.
Adding my 2 cents here, I too had lots of trouble connecting to a remote using "Remote SSH Extension of Microsoft". Unfortunately, no luck and spent a lot of time trying all ways possible.
I found another extension named "SSH Client" by cweijan. It was easy and I was able to access my remote using it.
When I had this issue it was because the extension was complaining that the pem file permissions were too open, it should be accessible just by my current user.
Yes, I would like to ~ add on top of Shivam Popat's answer.
Configure F1 ssh.add and Option to add client, and password appears.
Now, connect, and save.
From the left pane you would see icon of key. and upon clicking it will open the remote folders.
The previous problem with VScode remote SSH resolved.
I am trying to get a solr server running to use with Sitecore, but I can't seem to get it to work.
When I start solr (6.6.1) I get the message:
> bin\solr.cmd -p 8983
Waiting up to 30 to see Solr running on port 8983
Started Solr server on port 8983. Happy searching!
But when I go to localhost:8983/solr/ I get an empty page or some messages about not being able to connect (differs from each browser).
When I do a status it says that the server is running and some information about the usage so this seems fine.
But when I do a healthcheck on the server I get a lot of warnings saying:
WARN - 2018-02-27 09:48:27.768; org.apache.zookeeper.ClientCnxn$SendThread; Session 0x0 for server BBLP-JSCHOOT.colo.betabit.nl/0:0:0:0:0:0:0:1:8983, unexpected error, closing socket connection and attempting reconnect
java.io.IOException: Packet len352518912 is out of range!
at org.apache.zookeeper.ClientCnxnSocket.readLength(ClientCnxnSocket.java:112)
at org.apache.zookeeper.ClientCnxnSocketNIO.doIO(ClientCnxnSocketNIO.java:79)
at org.apache.zookeeper.ClientCnxnSocketNIO.doTransport(ClientCnxnSocketNIO.java:366)
at org.apache.zookeeper.ClientCnxn$SendThread.run(ClientCnxn.java:1141)
WARN - 2018-02-27 09:48:28.240; org.apache.zookeeper.ClientCnxn$SendThread; Session 0x0 for server pso/127.0.0.1:8983, unexpected error, closing socket connection and attempting reconnect
and after some of these I get:
ERROR: java.util.concurrent.TimeoutException: Could not connect to ZooKeeper localhost:8983 within 10000 ms
Anyone has any idea what can cause this? Seems that something is wrong with zookeeper but I can't quite figure out what that is.
Attempting to get this HTTP webserver I found online running after downloading their source files (source: Webserver). [Files located at bottom of webpage.]
I attempted to compile it using their Makefile but there were some errors, where I just needed to #include some extra libraries. However, once I got that compiled and running (tested using telnet)
telnet localhost <port number>
I get the following:
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
Then after 5 seconds or so it displays the following:
Connection closed by foreign host.
I'm not sure if the person who wrote it is still managing it so I figured I'd ask here. Any ideas as to why connection closes?
I'm running this on a Windows machine connected to a Unix server, so as the program site states, it should be running correctly on Unix machines.
in the file: reqhead.c
in the function: Get_Request()
There is a timed call to select()
You can change the timeout value (currently 5 seconds)
or replace the timeout parameter with a NULL parameter (although replacing with NULL would mean the code, once a connection is established would wait forever.)
First we will see ubuntu system log with this command
sudo gedit /var/log/syslog
and if you will see this error "execv( /usr/sbin/tcpd ) failed: No such file or directory"
then run this command
sudo apt-get install tcpd
It will solve your problem (if not then you need to search your system error on google)
I'm having some problems restarting plesk on our server.
I increased the memory limit in our PHP.ini file and had stopped the server and was in the process of restarting when i've received the following error:
[root#server77-68-52-152 ~]# /etc/init.d/psa start
Starting xinetd service... done
Starting named service... done
Starting mysqld service... done
Starting postgresql service... done
Starting psa-spamassassin service... done
Plesk: Starting Mail Server... already started
Starting mail handlers tmpfs storage
Starting Plesk... failed
Starting drwebd service... failed
I'll be honest I'm very new to the dedicated server side of things so need all the help I can get!
Turns out it was an earlier SSL upgrade that broke plesk...it hadn't come to light because plesk hadn't been restarted until the point I updated the PHP file!
You should always check the log files for the exact reason. It will help in fixing the issue faster. Below the log files path of plesk. Check the reason there why plesk is failing to start.
Error log: /var/log/sw-cp-server/error_log
Access log: /usr/local/psa/admin/logs/httpsd_access_log
Panel log: /usr/local/psa/admin/logs/panel.log