Thank you for all your help.
I'm building an application in CakePHP4 that handles maps.
I want to get the values that are within a reference center point from the DB.
The SQL you want to execute is as follows
SELECT id, place, lng, lat,
(6378 * acos(
cos(radians(Base latitude)) * cos(radians(lat)) * cos(radians(lng) – radians(Base latitude))
+ sin(radians(Base latitude)) * sin(radians(lat))))
AS distance FROM test HAVING distance < 10 ORDER BY distance
I know that you can write pure SQL and execute it with "$connection->execute($sql, $bind)->fetchAll('assoc')".
But I want to run it in Cake's query builder. I've done some research. I found out that I can create a virtual field in my model with a protected function __getSocial(){. But I can't pass any arguments to it.
I want to write the code that I tried, but I don't have anything to write because I don't understand it at all.
Please help me out....
Translated with www.DeepL.com/Translator (free version)
Related
I could need some help with a Anylogic Model.
Model (short): Manufacturing scenario with orders move in a individual route. The workplaces (WP) are dynamical created by simulation start. Their names, quantity and other parameters are stored in a database (excel Import). Also the orders are created according to an import. The Agent population "order" has a collection routing which contains the Workplaces it has to stop in the specific order.
Target: I want a moveTo block in main which finds the next destination of the agent order.
Problem and solution paths:
I set the destination Type to agent and in the Agent field I typed a function agent.getDestination(). This function is in order which returns the next entry of the collection WP destinationName = routing.get(i). With this I get a Datatype error (while run not compiling). I quess it's because the database does not save the entrys as WP Type but only String.
Is there a possiblity to create a collection with agents from an Excel?
After this I tried to use the same getDestination as String an so find via findFirst the WP matching the returned name and return it as WP. WP targetWP = findFirst(wps, w->w.name == destinationName);
Of corse wps (the population of Workplaces) couldn't be found.
How can I search the population?
Maybe with an Agentlink?
I think it is not that difficult but can't find an answer or a solution. As you can tell I'm a beginner... Hope the description is good an someone can help me or give me a hint :)
Thanks
Is there a possiblity to create a collection with agents from an Excel?
Not directly using the collection's properties and, as you've seen, you can't have database (DB) column types which are agent types.1
But this is relatively simple to do directly via Java code (and you can use the Insert Database Query wizard to construct the skeleton code for you).
After this I tried to use the same getDestination as String an so find via findFirst the WP matching the returned name and return it as WP
Yes, this is one approach. If your order details are in Excel/the database, they are presumably referring to workplaces via some String ID (which will be a parameter of the workplace agents you've created from a separate Excel worksheet/database table). You need to use the Java equals method to compare strings though, not == (which is for comparing numbers or whether two objects are the same object).
I want a moveTo block in main which finds the next destination of the agent order
So the general overall solution is
Create a population of Workplace agents (let's say called workplaces in Main) from the DB, each with a String parameter id or similar mapped from a DB column.
Create a population of Order agents (let's say called orders in Main) from the DB and then, in their on-startup action, set up their collection of workplace IDs (type ArrayList, element class String; let's say called workplaceIDsList) using data from another DB table.
Order probably also needs a working variable storing the next index in the list that it needs to go to (so let's say an int variable nextWorkplaceIndex which starts at 0).
Write a function in Main called getWorkplaceByID that has a single String argument id and returns a Workplace. This gets the workplace from the population that matches the ID; a one-line way similar to yours is findFirst(workplaces, w -> w.id.equals(id)).
The MoveTo block (which I presume is in Main) needs to move the Order to an agent defined by getWorkplaceByID(agent.workplaceIDsList.get(nextWorkplaceIndex++)). (The ++ bit increments the index after evaluating the expression so it is ready for the next workplace to go to.)
For populating the collection, you'd have two tables, something like the below (assuming using strings as IDs for workplaces and orders):
orders table: columns for parameters of your orders (including some String id column) other than the workplace-list. (Create one Order agent per row.)
order_workplaces table: columns order_id, sequence_num and workplace_id (so with multiple rows specifying the sequence of workplace IDs for an order ID).
In the On startup action of Order, set up the skeleton query code via the Insert Database Query wizard as below (where we want to loop through all rows for this order's ID and do something --- we'll change the skeleton code to add entries to the collection instead of just printing stuff via traceln like the skeleton code does).
Then we edit the skeleton code to look like the below. (Note we add an orderBy clause to the initial query so we ensure we get the rows in ascending sequence number order.)
List<Tuple> rows = selectFrom(order_workplaces)
.where(order_workplaces.order_id.eq(id))
.orderBy(order_workplaces.sequence_num.asc())
.list();
for (Tuple row : rows) {
workplaceIDsList.add(row.get(order_workplaces.workplace_id));
}
1 The AnyLogic database is a normal relational database --- HSQLDB in fact --- and databases only understand their own specific data types like VARCHAR, with AnyLogic and the libraries it uses translating these to Java types like String. In the user interface, AnyLogic makes it look like you set the column types as int, String, etc. but these are really the Java types that the columns' contents will ultimately be translated into.
AnyLogic does support columns which have option list types (and the special Code type column for columns containing executable Java code) but these are special cases using special logic under the covers to translate the column data (which is ultimately still a string of characters) into the appropriate option list instance or (for Code columns) into compiled-on-the-fly-and-then-executed Java).
Welcome to Stack Overflow :) To create a Population via Excel Import you have to create a method and call Code like this. You also need an empty Population.
int n = excelFile.getLastRowNum(YOUR_SHEET_NAME);
for(int i = FIRST_ROW; i <= n; i++){
String name = excelFile.getCellStringValue(YOUR_SHEET_NAME, i, 1);
double SEC_PARAMETER_TO_READ= excelFile.getCellNumericValue(YOUR_SHEET_NAME, i, 2);
WP workplace = add_wps(name, SEC_PARAMETER_TO_READ);
}
Now if you want to get a workplace by name, you have to create a method similar to your try.
Functionbody:
WP workplaceToFind = wps.findFirst(w -> w.name.equals(destinationName));
if(workplaceToFind != null){
//do what ever you want
}
Code Migration due to Performance Issues :-
SQL Server LIKE Condition ( BEFORE )
SQL Server Full Text Search --> CONTAINS ( BEFORE )
Elastic Search ( CURRENTLY )
Achieved So Far :-
We have a web page created in ASP.Net Core which has a Auto Complete Drop Down of 2.5+ Million Companies Indexed in Elastic Search https://www.99corporates.com/
Due to performance issues we have successfully shifted our code from SQL Server Full Text Search to Elastic Search and using NEST v7.2.1 and Elasticsearch.Net v7.2.1 in our .Net Code.
Still looking for a solution :-
If the user does not select a company from the Auto Complete List and simply enters a few characters and clicks on go then a list should be displayed which we had done earlier by using the SQL Server Full Text Search --> CONTAINS
Can we call the ASP.Net Web Service which we have created using SQL CLR and code like SELECT * FROM dbo.Table WHERE Name IN( dbo.SQLWebRequest('') )
[System.Web.Script.Services.ScriptMethod()]
[System.Web.Services.WebMethod]
public static List<string> SearchCompany(string prefixText, int count)
{
}
Any better or alternate option
While that solution (i.e. the SQL-APIConsumer SQLCLR project) "works", it is not scalable. It also requires setting the database to TRUSTWORTHY ON (a security risk), and loads a few assemblies as UNSAFE, such as Json.NET, which is risky if any of them use static variables for caching, expecting each caller to be isolated / have their own App Domain, because SQLCLR is a single, shared App Domain, hence static variables are shared across all callers, and multiple concurrent threads can cause race-conditions (this is not to say that this is something that is definitely happening since I haven't seen the code, but if you haven't either reviewed the code or conducted testing with multiple concurrent threads to ensure that it doesn't pose a problem, then it's definitely a gamble with regards to stability and ensuring predictable, expected behavior).
To a slight degree I am biased given that I do sell a SQLCLR library, SQL#, in which the Full version contains a stored procedure that also does this but a) handles security properly via signatures (it does not enable TRUSTWORTHY), b) allows for handling scalability, c) does not require any UNSAFE assemblies, and d) handles more scenarios (better header handling, etc). It doesn't handle any JSON, it just returns the web service response and you can unpack that using OPENJSON or something else if you prefer. (yes, there is a Free version of SQL#, but it does not contain INET_GetWebPages).
HOWEVER, I don't think SQLCLR is a good fit for this scenario in the first place. In your first two versions of this project (using LIKE and then CONTAINS) it made sense to send the user input directly into the query. But now that you are using a web service to get a list of matching values from that user input, you are no longer confined to that approach. You can, and should, handle the web service / Elastic Search portion of this separately, in the app layer.
Rather than passing the user input into the query, only to have the query pause to get that list of 0 or more matching values, you should do the following:
Before executing any query, get the list of matching values directly in the app layer.
If no matching values are returned, you can skip the database call entirely as you already have your answer, and respond immediately to the user (much faster response time when no matches return)
If there are matches, then execute the search stored procedure, sending that list of matches as-is via Table-Valued Parameter (TVP) which becomes a table variable in the stored procedure. Use that table variable to INNER JOIN against the table rather than doing an IN list since IN lists do not scale well. Also, be sure to send the TVP values to SQL Server using the IEnumerable<SqlDataRecord> method, not the DataTable approach as that merely wastes CPU / time and memory.
For example code on how to accomplish this correctly, please see my answer to Pass Dictionary to Stored Procedure T-SQL
In C#-style pseudo-code, this would be something along the lines of the following:
List<string> = companies;
companies = SearchCompany(PrefixText, Count);
if (companies.Length == 0)
{
Response.Write("Nope");
}
else
{
using(SqlConnection db = new SqlConnection(connectionString))
{
using(SqlCommand batch = db.CreateCommand())
{
batch.CommandType = CommandType.StoredProcedure;
batch.CommandText = "ProcName";
SqlParameter tvp = new SqlParameter("ParamName", SqlDbType.Structured);
tvp.Value = MethodThatYieldReturnsList(companies);
batch.Paramaters.Add(tvp);
db.Open();
using(SqlDataReader results = db.ExecuteReader())
{
if (results.HasRows)
{
// deal with results
Response.Write(results....);
}
}
}
}
}
Done. Got the solution.
Used SQL CLR https://github.com/geral2/SQL-APIConsumer
exec [dbo].[APICaller_POST]
#URL = 'https://www.-----/SearchCompany'
,#JsonBody = '{"searchText":"GOOG","count":10}'
Let me know if there is any other / better options to achieve this.
I'm working with IBM Cognos Tm1 REST API.
I need subset of the data values contained in a cube (Cube1 for example).
So, I'm executing a view (View1 for example) and obtain a cellset.
http://server:port/api/v1/Cubes('Cube1')/Views('View1')/tm1.execute?$expand=Cells($select=Ordinal,FormattedValue,Consolidated)
However, I obtain much more cell values than I need.
My questions are:
Can I create my own view via REST API only? (And how?)
Can I ask API to return only not consolidated values?
Can I obtain cell value in some other way, without views?
Try creating a view via ExecuteMDX
Post Query:
api/v1/ExecuteMDX?$expand=Axes($expand=Hierarchies($select=Name),Tuples($expand=Members($select=Name))),Cells($select=Ordinal,Value)
And then in the Body
{
"MDX": "SELECT
SELECT {[Version].[Actual]}*
{[Year].[2017]} *
{[Location]. [1001]}*
{[Period].[Total Year]} *
{[Currency].[USD]} *
[Department].[Total Department]} *
{[Product Type].[Total Product Type]} *
{TM1FILTERBYLEVEL({TM1SUBSETALL( [Account] )}, 0)}
{[Cube1 Measure].[Amount]} ON 0 FROM [Cube1]"
}
Good Luck!
You create dynamic views using TM1 Java APIs. You can find detailed documentation in \tm1_64\TM1JavaApiDocs\
or by default its
C:\Program Files\ibm\cognos\tm1_64\TM1JavaApiDocs
and sample codes are located in C:\Program Files\ibm\cognos\tm1_64\tm1api\samplecode\java
Hope this helps you.
Hello ppl I am trying to work with databases and I am new to Matlab.
I want to manipulate databeses created in MS Access but I don't know(I hope find a way to enter data from GUI (this GUI created using matlab ) and save in database)
I've designed the user interface in MATLAB, and create a database in MS Access
The problem I do not know how I connect between the database and MATLAB
I find some code to how connect between it.
dbpath = ['C:\Users\Esra\Documents\Esra.accdb'];
conurl = [['jdbc:odbc:Driver={Microsoft Access Driver (*.mdb, *.accdb)};DSN='';DBQ='] dbpath];
con = database('','','','sun.jdbc.odbc.JdbcOdbcDriver', conurl);
I hope find good code or book about this .
final , i don not know if it is the correct place to my question or not , if not ,please put my question in correct place
You need to run SQL queries on the database; you can do this with database.fetch (and a few other friends).
The example query from the docs:
conn = database('dbtoolboxdemo','','');
setdbprefs('DataReturnFormat','cellarray')
results = fetch(conn, 'select productdescription from producttable')
% Not in the example in the docs: this syntax, which I prefer, is also supported
results = conn.fetch('select productdescription from producttable');
Note that you will also need to know how to write SQL. For that, there are plenty of resources online - you just have to search for them.
in my project we have an entity called Trip. This trip has two points: start and finish. Start and finish are geo coordinates with some added properties like address atc.
what i need is to query for all Trips that satisifies search criteria for both start and finish.
smth like
select from trips where start near 16,16 and finish near 18,20 where type = type
So my question is: which database can offer such functionality?
what i have tried
i have explored mongodb which has support for geo indexes but does not support this use case. current solution stores the points as separate documents which have a reference to a Trip. we run two separate quesries for starts and finishes, then extract ids of their associated trips and then select trip ids that are found both in starts and finishes and finally return a collection of trips.
on a small sample it works fine but with a larger collection it gets slow and it's like scratching my left ear with my right hand.
so i am looking for a better solution.
i know about neo4j and its spatial plugin but i couldn't even make it work on windows. would it support our use case?
or are there any better solutions? preferably with a object mapper written in php.
like edze already said Postgres (PostGIS) or SQLite(SpatiaLite) is what your looking for
SELECT
*
FROM
trips
WHERE
ST_Distance(ST_StartPoint(way), ST_GeomFromText('POINT(16 16)',4326) < 5
AND ST_Distance(ST_EndPoint(way), ST_GeomFromText('POINT(18 20)',4326) < 5
AND type = 'type'