How to write a pipe (|) in batch file from another batch file? - batch-file

I am trying to make .bat script from another .bat script where I have to insert a command which has pipe | in it. When I executed the main script I got an error. I tried to figure it out by putting "|" or making whole command in between quotes, "command".

Escape the character | using caret ^
As an example, here is a batch-file called dummy.cmd which needs to create another batch file called ping_script.cmd
#(echo ping localhost ^| findstr /i "reply")>ping_script.cmd
You can also do numerous outputs to the file. Here is the same script, but it also adds a line to echo test newline script. Here you will see that the special character is also being escape, else the first batch file will see it as an operator for itself. Below that, it can still do whatever is needed in the first script, like testing if ping_script.cmd exists.
#(echo ping localhost ^| findstr /i "reply"
echo echo Test ^& echo Script
)>ping_script.cmd
if exist ping_script.cmd echo Success
Note, not all special characters can be escaped using caret. This link at Rob van Der Woude shows a decent table.

Related

Psexec Log File to Mirror CMD Window Output [duplicate]

How can I run a command-line application in the Windows command prompt and have the output both displayed and redirected to a file at the same time?
If, for example, I were to run the command dir > test.txt, this would redirect output to a file called test.txt without displaying the results.
How could I write a command to display the output and redirect output to a file in the Windows command prompt, similar to the tee command on Unix?
To expand on davor's answer, you can use PowerShell like this:
powershell "dir | tee test.txt"
If you're trying to redirect the output of an exe in the current directory, you need to use .\ on the filename, eg:
powershell ".\something.exe | tee test.txt"
I was able to find a solution/workaround of redirecting output to a file and then to the console:
dir > a.txt | type a.txt
where dir is the command which output needs to be redirected, a.txt a file where to store output.
There's a Win32 port of the Unix tee command, that does exactly that. See http://unxutils.sourceforge.net/ or http://getgnuwin32.sourceforge.net/
Check this out: wintee
No need for cygwin.
I did encounter and report some issues though.
Also you might check unxutils because it contains tee (and no need for cygwin), but beware that output EOL's are UNIX-like here.
Last, but not least, is if you have PowerShell, you could try Tee-Object. Type get-help tee-object in PowerShell console for more info.
#tori3852
I found that
dir > a.txt | type a.txt
didn't work (first few lines of dir listing only - suspect some sort of process forking and the second part, the 'type' command terminated before the dire listing had completed? ),
so instead I used:
dir > z.txt && type z.txt
which did - sequential commands, one completes before the second starts.
A simple C# console application would do the trick:
using System;
using System.Collections.Generic;
using System.IO;
namespace CopyToFiles
{
class Program
{
static void Main(string[] args)
{
var buffer = new char[100];
var outputs = new List<TextWriter>();
foreach (var file in args)
outputs.Add(new StreamWriter(file));
outputs.Add(Console.Out);
int bytesRead;
do
{
bytesRead = Console.In.ReadBlock(buffer, 0, buffer.Length);
outputs.ForEach(o => o.Write(buffer, 0, bytesRead));
} while (bytesRead == buffer.Length);
outputs.ForEach(o => o.Close());
}
}
}
To use this you just pipe the source command into the program and provide the path of any files you want to duplicate the output to. For example:
dir | CopyToFiles files1.txt files2.txt
Will display the results of dir as well as store the results in both files1.txt and files2.txt.
Note that there isn't much (anything!) in the way of error handling above, and supporting multiple files may not actually be required.
Unfortunately there is no such thing.
Windows console applications only have a single output handle. (Well, there are two STDOUT, STDERR but it doesn't matter here) The > redirects the output normally written to the console handle to a file handle.
If you want to have some kind of multiplexing you have to use an external application which you can divert the output to. This application then can write to a file and to the console again.
This works, though it's a bit ugly:
dir >_ && type _ && type _ > a.txt
It's a little more flexible than some of the other solutions, in that it works statement-by-statement so you can use it to append as well. I use this quite a bit in batch files to log and display messages:
ECHO Print line to screen and log to file. >_ && type _ && type _ >> logfile.txt
Yes, you could just repeat the ECHO statement (once for the screen and the second time redirecting to the logfile), but that looks just as bad and is a bit of a maintenance issue. At least this way you don't have to make changes to messages in two places.
Note that _ is just a short filename, so you'll need to make sure to delete it at the end of your batch file (if you're using a batch file).
I’d like to expand a bit on Saxon Druce’s excellent answer.
As stated, you can redirect the output of an executable in the current directory like so:
powershell ".\something.exe | tee test.txt"
However, this only logs stdout to test.txt. It doesn’t also log stderr.
The obvious solution would be to use something like this:
powershell ".\something.exe 2>&1 | tee test.txt"
However, this won’t work for all something.exes. Some something.exes will interpret the 2>&1 as an argument and fail. The correct solution is to instead only have apostrophes around the something.exe and its switches and arguments, like so:
powershell ".\something.exe --switch1 --switch2 … arg1 arg2 …" 2^>^&1 ^| tee test.txt
Notice though, that in this case you have to escape the special cmd-shell characters ">&|" with a "^" each so they only get interpreted by powershell.
mtee is a small utility which works very well for this purpose. It's free, source is open, and it Just Works.
You can find it at http://www.commandline.co.uk.
Used in a batch file to display output AND create a log file simultaneously, the syntax looks like this:
someprocess | mtee /+ mylogfile.txt
Where /+ means to append output.
This assumes that you have copied mtee into a folder which is in the PATH, of course.
I agree with Brian Rasmussen, the unxutils port is the easiest way to do this. In the Batch Files section of his Scripting Pages Rob van der Woude provides a wealth of information on the use MS-DOS and CMD commands. I thought he might have a native solution to your problem and after digging around there I found TEE.BAT, which appears to be just that, an MS-DOS batch language implementation of tee. It is a pretty complex-looking batch file and my inclination would still be to use the unxutils port.
If you have cygwin in your windows environment path you can use:
dir > a.txt | tail -f a.txt
dir 1>a.txt 2>&1 | type a.txt
This will help to redirect both STDOUT and STDERR
I know this is a very old topic, but in previous answers there is not a full implementation of a real time Tee written in Batch. My solution below is a Batch-JScript hybrid script that use the JScript section just to get the output from the piped command, but the processing of the data is done in the Batch section. This approach have the advantage that any Batch programmer may modify this program to fit specific needs. This program also correctly process the output of CLS command produced by other Batch files, that is, it clear the screen when CLS command output is detected.
#if (#CodeSection == #Batch) #then
#echo off
setlocal EnableDelayedExpansion
rem APATee.bat: Asynchronous (real time) Tee program, Batch-JScript hybrid version
rem Antonio Perez Ayala
rem The advantage of this program is that the data management is written in Batch code,
rem so any Batch programmer may modify it to fit their own needs.
rem As an example of this feature, CLS command is correctly managed
if "%~1" equ "" (
echo Duplicate the Stdout output of a command in the screen and a disk file
echo/
echo anyCommand ^| APATee teeFile.txt [/A]
echo/
echo If /A switch is given, anyCommand output is *appended* to teeFile.txt
goto :EOF
)
if "%2" equ ":TeeProcess" goto TeeProcess
rem Get the output of CLS command
for /F %%a in ('cls') do set "cls=%%a"
rem If /A switch is not provided, delete the file that receives Tee output
if /I "%~2" neq "/A" if exist %1 del %1
rem Create the semaphore-signal file and start the asynchronous Tee process
echo X > Flag.out
if exist Flag.in del Flag.in
Cscript //nologo //E:JScript "%~F0" | "%~F0" %1 :TeeProcess
del Flag.out
goto :EOF
:TeeProcess
rem Wait for "Data Available" signal
if not exist Flag.in goto TeeProcess
rem Read the line sent by JScript section
set line=
set /P line=
rem Set "Data Read" acknowledgement
ren Flag.in Flag.out
rem Check for the standard "End Of piped File" mark
if "!line!" equ ":_EOF_:" exit /B
rem Correctly manage CLS command
if "!line:~0,1!" equ "!cls!" (
cls
set "line=!line:~1!"
)
rem Duplicate the line in Stdout and the Tee output file
echo(!line!
echo(!line!>> %1
goto TeeProcess
#end
// JScript section
var fso = new ActiveXObject("Scripting.FileSystemObject");
// Process all lines of Stdin
while ( ! WScript.Stdin.AtEndOfStream ) {
// Read the next line from Stdin
var line = WScript.Stdin.ReadLine();
// Wait for "Data Read" acknowledgement
while ( ! fso.FileExists("Flag.out") ) {
WScript.Sleep(10);
}
// Send the line to Batch section
WScript.Stdout.WriteLine(line);
// Set "Data Available" signal
fso.MoveFile("Flag.out", "Flag.in");
}
// Wait for last "Data Read" acknowledgement
while ( ! fso.FileExists("Flag.out") ) {
WScript.Sleep(10);
}
// Send the standard "End Of piped File" mark
WScript.Stdout.WriteLine(":_EOF_:");
fso.MoveFile("Flag.out", "Flag.in");
I was also looking for the same solution, after a little try, I was successfully able to achieve that in Command Prompt. Here is my solution :
#Echo off
for /f "Delims=" %%a IN (xyz.bat) do (
%%a > _ && type _ && type _ >> log.txt
)
#Echo on
It even captures any PAUSE command as well.
Something like this should do what you need?
%DATE%_%TIME% > c:\a.txt & type c:\a.txt
ipconfig >> c:\a.txt & type c:\a.txt
ping localhost >> c:\a.txt & type c:\a.txt
pause
Here's a sample of what I've used based on one of the other answers
#echo off
REM SOME CODE
set __ERROR_LOG=c:\errors.txt
REM set __IPADDRESS=x.x.x.x
REM Test a variable
if not defined __IPADDRESS (
REM Call function with some data and terminate
call :TEE %DATE%,%TIME%,IP ADDRESS IS NOT DEFINED
goto :EOF
)
REM If test happens to be successful, TEE out a message and end script.
call :TEE Script Ended Successful
goto :EOF
REM THE TEE FUNCTION
:TEE
for /f "tokens=*" %%Z in ("%*") do (
> CON ECHO.%%Z
>> "%__ERROR_LOG%" ECHO.%%Z
goto :EOF
)
send output to console, append to console log, delete output from current command
dir >> usb-create.1 && type usb-create.1 >> usb-create.log | type usb-create.1 && del usb-create.1
This is a variation on a previous answer by MTS, however it adds some functionality that might be useful to others. Here is the method that I used:
A command is set as a variable, that can be used later throughout the code, to output to the command window and append to a log file, using set _Temp_Msg_Cmd=
the command has escaped redirection using the carrot ^ character so that the commands are not evaluated initially
A temporary file is created with a filename similar to the batch file being run called %~n0_temp.txt that uses command line parameter extension syntax %~n0 to get the name of the batch file.
The output is appended to a separate log file %~n0_log.txt
Here is the sequence of commands:
The output and error messages are sent to the temporary file ^> %~n0_temp.txt 2^>^&1
The content of the temporary file is then both:
appended to the logfile ^& type %~n0_temp.txt ^>^> %~n0_log.txt
output to the command window ^& type %~n0_temp.txt
The temporary file with the message is deleted ^& del /Q /F %~n0_temp.txt
Here is the example:
set _Temp_Msg_Cmd= ^> %~n0_temp.txt 2^>^&1 ^& type %~n0_temp.txt ^>^> %~n0_log.txt ^& type %~n0_temp.txt ^& del /Q /F %~n0_temp.txt
This way then the command can simply be appended after later commands in a batch file that looks a lot cleaner:
echo test message %_Temp_Msg_Cmd%
This can be added to the end of other commands as well. As far as I can tell it will work when messages have multiple lines. For example the following command outputs two lines if there is an error message:
net use M: /D /Y %_Temp_Msg_Cmd%
Just like unix.
dir | tee a.txt
Does work On windows XP, it requires mksnt installed.
It displays on the prompt as well as appends to the file.
This is not another answer, but more an overview and clarification to the already existed answers like
Displaying Windows command prompt output and redirecting it to a file
and others
I've found for myself that there is a set of issues what makes a set of tee implementations are not reliable in the Windows (Windows 7 in mine case).
I need to use specifically a tee implementation because have already uses a batch script with self redirection:
#echo off
setlocal
... some conditions here ..
rem the redirection
"%COMSPEC%" /C call %0 %* 2>&1 | "<path_to_tee_utililty>" ".log\<log_file_name_with_date_and_time>.%~nx0.log"
exit /b
:IMPL
... here the rest of script ...
The script and calls to some utilities inside the script can break the output if used together with a tee utility.
The gnuwin32 implementation:
http://gnuwin32.sourceforge.net/packages/coreutils.htm
Pros:
Correctly handles standard output together with a console progress bar, where the \r character is heavily used.
Cons:
Makes console progress bars to draw only in a log file, but it has not duplicated or visible in the console window.
Throws multiple error messages Cwrite error: No such file or directory because seems the cmd interpreter closes the pipe/stdout too early and can not self close after that (spamming until termination).
Does not duplicate/print the output from the pause command (Press any key to continue...) in the console window.
The wintee implementation:
https://code.google.com/archive/p/wintee/
https://github.com/rbuhl/wintee
Pros:
Shows a console progress bar both in the console window and in a log file (multiple prints).
Does duplicate/print the output from the pause command (Press any key to continue...) in the console window.
Cons:
Incorrectly handles the \r character, output is mixed and messed (https://code.google.com/archive/p/wintee/issues/7 ).
Having other issues: https://code.google.com/archive/p/wintee/issues
The UnxUtils implementation:
http://unxutils.sourceforge.net/
https://sourceforge.net/projects/unxutils/files/unxutils/current/
Pros
Shows a console progress bar both in the console window and in a log file (multiple prints).
Correctly handles the \r character.
Does duplicate/print the output from the pause command (Press any key to continue...) in the console window.
Cons
Not yet found
The ss64.net implementation:
http://ss64.net/westlake/nt
http://ss64.net/westlake/nt/tee.zip
Pros:
Shows a console progress bar both in the console window and in a log file (multiple prints).
Cons:
Incorrectly handles the \r character, output is mixed and messed
For some reason does duplicate/print the output from the pause command (Press any key to continue...) in the console window AFTER a key press.
The ritchielawrence mtee implementation:
https://ritchielawrence.github.io/mtee
https://github.com/ritchielawrence/mtee
Pros
Shows a console progress bar both in the console window and in a log file (multiple prints).
Correctly handles the \r character.
Does duplicate/print the output from the pause command (Press any key to continue...) in the console window.
The error code retain feature w/o a need to use workaround with the doskey (/E flag, Windows command interpreter: how to obtain exit code of first piped command )
Cons
Does not support forward slash characters in the path to a log file (https://github.com/ritchielawrence/mtee/issues/6 )
Has a race condition issue, when can not extract a pipe process exit code because it has closed before it's access (https://github.com/ritchielawrence/mtee/issues/4 )
So, if you are choosing the tee utility implementation between the above, then a better choice is the UnxUtils or mtee.
If you are searching for a better implementation with more features and less issues, then you can use callf utility:
https://github.com/andry81/contools/blob/trunk/Utilities/src/callf/help.tpl
You can run instead of:
call test.bat | mtee /E 1.log
This:
callf.exe /ret-child-exit /tee-stdout 1.log /tee-stdout-dup 1 "" "cmd.exe /c call test.bat"
It is better because it can pipe stdout separately from stderr and you can even pipe between processes with Administrator privileges isolation using named pipes.
#echo on
set startDate=%date%
set startTime=%time%
set /a sth=%startTime:~0,2%
set /a stm=1%startTime:~3,2% - 100
set /a sts=1%startTime:~6,2% - 100
fullprocess.bat > C:\LOGS\%startDate%_%sth%.%stm%.%sts%.LOG | fullprocess.bat
This will create a log file with the current datetime and you can the console lines during the process
I use a batch subroutine with a "for" statement to get the command output one line at a time and both write that line to a file and output it to the console.
#echo off
set logfile=test.log
call :ExecuteAndTee dir C:\Program Files
Exit /B 0
:ExecuteAndTee
setlocal enabledelayedexpansion
echo Executing '%*'
for /f "delims=" %%a in ('%* 2^>^&1') do (echo.%%a & echo.%%a>>%logfile%)
endlocal
Exit /B 0
If you're on the CLI, why not use a FOR loop to "DO" whatever you want:
for /F "delims=" %a in ('dir') do #echo %a && echo %a >> output.txt
Great resource on Windows CMD for loops: https://ss64.com/nt/for_cmd.html
The key here is setting the delimeters (delims), that would break up each line of output, to nothing. This way it won't break on the default of white-space. The %a is an arbitrary letter, but it is used in the "do" section to, well... do something with the characters that were parsed at each line. In this case we can use the ampersands (&&) to execute the 2nd echo command to create-or-append (>>) to a file of our choosing. Safer to keep this order of DO commands in case there's an issue writing the file, we'll at least get the echo to the console first. The at sign (#) in front of the first echo suppresses the console from showing the echo-command itself, and instead just displays the result of the command which is to display the characters in %a. Otherwise you'd see:
echo Volume in drive [x] is Windows Volume in drive [x] is Windows
UPDATE: /F skips blank lines and only fix is to pre-filter the output adding a character to every line (maybe with line-numbers via the command find). Solving this in CLI isn't quick or pretty. Also, I didn't include STDERR, so here's capturing errors as well:
for /F "delims=" %a in ('dir 2^>^&1') do #echo %a & echo %a >> output.txt
Redirecting Error Messages
The carets (^) are there to escape the symbols after them, because the command is a string that's being interpreted, as opposed to say, entering it directly on the command-line.
I just found a way to use the perl as alternative, e.g.:
CMD1 | perl -ne "print $_; print STDERR $_;" 2> OUTPUT.TEE
Following helps if you want something really seen on the screen - even if the batch file was redirected to a file. The device CON maybe used also if redirected to a file
Example:
ECHO first line on normal stdout. maybe redirected
ECHO second line on normal stdout again. maybe redirected
ECHO third line is to ask the user. not redirected >CON
ECHO fourth line on normal stdout again. maybe redirected
Also see good redirection description: http://www.p-dd.com/chapter7-page14.html
How do I display and redirect output
to a file. Suppose if I use dos
command, dir > test.txt ,this command
will redirect output to file test.txt
without displaying the results. how to
write a command to display the output
and redirect output to a file using
DOS i.e., windows command prompt, not
in UNIX/LINUX.
You may find these commands in biterscripting ( http://www.biterscripting.com ) useful.
var str output
lf > $output
echo $output # Will show output on screen.
echo $output > "test.txt" # Will write output to file test.txt.
system start "test.txt" # Will open file test.txt for viewing/editing.
This works in real time but is also kind a ugly and the performance is slow. Not well tested either:
#echo off
cls
SET MYCOMMAND=dir /B
ECHO File called 'test.bat' > out.txt
for /f "usebackq delims=" %%I in (`%MYCOMMAND%`) do (
ECHO %%I
ECHO %%I >> out.txt
)
pause
An alternative is to tee stdout to stderr within your program:
in java:
System.setOut(new PrintStream(new TeeOutputStream(System.out, System.err)));
Then, in your dos batchfile: java program > log.txt
The stdout will go to the logfile and the stderr (same data) will show on the console.
I install perl on most of my machines so an answer using perl: tee.pl
my $file = shift || "tee.dat";
open $output, ">", $file or die "unable to open $file as output: $!";
while(<STDIN>)
{
print $_;
print $output $_;
}
close $output;
dir | perl tee.pl
or
dir | perl tee.pl dir.bat
crude and untested.

Is there a work around for ":" (colon) when downloading from ftp using windows

I'm creating a batch script to a get a file based on what option the user chooses. The only problem is, the file in the ftp server has a colon and from what i've researched, windows does not accept ":" colon.
Is it possible to replace that character before downloading?
Below is a sample of my code.
Echo open sample.net>first.dat
Echo user>>first.dat
Echo password>>first.dat
Echo ascii>>first.dat
Echo cd directory>>first.dat
Echo lcd folder>>first.dat
Echo get sample-text-10-16-2017_16:36:00:340033.txt>>first.dat
Echo bye>>first.dat
ftp -v -i -s:first.dat
del first.dat
As you can see also, I get a list first of the file names inside the folder for the user to input the file name. I just wrote a specific file name for the example
I'm still not familiar with the for loops in batch but I think that it is one way of replacing the characters in a file name before downloading
[Untried]
get remotefilename localfilename
is apparently valid, so placing a valid windows filename as a second argument should d/l to the file specified.
[Addendum - also untried]
(after Echo lcd folder>>first.dat)
echo mls remotefilesrequired awindowlistfilename>>first.dat
rem this should log in and create awindowslistfilename
rem containing the remote filelist
ftp -v -i -s:first.dat
del second.dat 2>nul
setlocal enabledelayedexpansion
for /f "delims=" %%a in (awindowslistfilename) do (
set "remote=%%a"
echo get !remote! !remote::=.!>>second.dat
)
endlocal
Echo bye>>second.dat
ftp -v -i -s:second.dat
del first.dat
del second.dat
Since I'm not aware of the return format for mls, I'm assuming that it's a simple file-list, one to a line.
This code first executes the ftp log-on palaver and an mls command, creating awindowslistfile locally.
It then deletes second.dat (the 2>nul suppresses error messages like file not found appearing on stderr)
setlocal enabledelayedexpansion and endlocal bracket a mode where the syntax changes such that !var! may be used to access the run-time value of a variable, whereas %var% always refers to the parse-time value.
The for/f command reads the filename (parenthesised) and assigns each line in turn to the metavariable %%a. The delims= option ensures that the entire line is assigned, ignoring the normal tokenising procedure.
A series of individual get commands is then written to second.dat, with the substitution of : by . in the name.
Finally, add the bye and FTP again.
(I'm not sure whether first.dat will also require a bye and second.bat will need to prelimnary commands, but could be...)
Note that it's batch convention to enclose filenames that may contain separators like Space,; in "quotes". How FTP will feel about that, if necessary, I can only guess.
Naturally, extra lines within the loop
set "remote=!remote:x=y!"
could be used to serially replace character sequences x by y if there are any other problematic characters encountered.

How to list file names without extension but keeping the spaces?

I am trying to create a list of files (about 4000) with batch file but without the extensions, some of the file names have - or _ or spaces which I would like to keep them the same, and then I am going to copy and paste the list inside Excel and run a macro that I found on this website to create individual files with different extension using the names on that list. I hope I make sense.
Here is my attempt so far:
for /f %%a in ('dir /b *.dsg') do #echo %%~na >txt1.txt
But this one just creates a list with only one name.
The batch code for this simple task is:
#echo off
del txt1.txt 2>nul
for /F "delims=" %%I in ('dir *.dsg /A-D /B 2^>nul') do echo %%~nI>>txt1.txt
The command DEL is used to delete a probably already existing file txt1.txt with redirecting the error message output to handle STDERR to device NUL to suppress it in case of the file does not exist in current directory.
Next the command DIR is executed by FOR in a separate command process. DIR lists only the names of all files matching the pattern *.dsg because of /A-D (not directory attribute) in bare format because of /B.
The error message output by DIR in case of no *.dsg file in current directory is suppressed by redirecting it to device NUL. The redirection operator > must be escaped here with caret character ^ to be interpreted as literal character when Windows command interpreter parses the FOR command line. Later on execution of DIR command line > is interpreted as redirection operator.
The list output by DIR is parsed by FOR line by line. The option delims= disables splitting up each line using spaces/tabs as delimiter. So assigned to loop variable I is always the entire line read from output of DIR.
Output by ECHO to handle STDOUT is the string left of last dot, i.e. the file name without file extension. This output is redirected to a file with appending the line to already existing file contents.
A space between %%~nI and redirection operator >> would be also output by ECHO and therefore also written as trailing space into the file.
For understanding the used commands and how they work, open a command prompt window, execute there the following commands, and read entirely all help pages displayed for each command very carefully.
del /?
echo /?
for /?
Read also the Microsoft article about Using Command Redirection Operators.
#user8033911, based upon your latest comment, there seems no reason why you cannot replace the file extension with another as part of the same process.
The code below entered directly in the Command prompt window should show you, it replaces, .dsg with .new.
For /F "EOL=/Delims=/" %A In ('Where/F .:*.dsg') Do #Echo %A to "%~dpnA.new"
If you still cannot understand just comment below explaining where you are having difficulty.

Write the computername to a text file if the name is not already in the text file

I have a small batch file that writes the computer name to a log.txt. I need the batch file to scan the list of computernames currently in the file. If the name exist then just exit and if the name doe snot exist I need it to write it.
I have written the part to write the computer name to a file
Echo %computername%>>C:\log.txt
Now I need it to read the log and only write the computer name if it does not exist in the file.
Try this:
FINDSTR "^%computername%$" < C:\log.txt >NUL || ECHO %computername%>>C:\log.txt
The FINDSTR command searches for %computername% in C:\log.txt, making sure it is not a substring of some other name (the ^ and $ symbols around the search term, see FINDSTR /? for more information). If FINDSTR finds nothing, it raises ERRORLEVEL.
The || command delimiter means that the value of ERRORLEVEL should be checked before invoking the following command (ECHO). If ERRORLEVEL is raised, the command executes, otherwise it doesn't.
So, if FINDSTR finds nothing, the name will be added to the file.

Displaying Windows command prompt output and redirecting it to a file

How can I run a command-line application in the Windows command prompt and have the output both displayed and redirected to a file at the same time?
If, for example, I were to run the command dir > test.txt, this would redirect output to a file called test.txt without displaying the results.
How could I write a command to display the output and redirect output to a file in the Windows command prompt, similar to the tee command on Unix?
To expand on davor's answer, you can use PowerShell like this:
powershell "dir | tee test.txt"
If you're trying to redirect the output of an exe in the current directory, you need to use .\ on the filename, eg:
powershell ".\something.exe | tee test.txt"
I was able to find a solution/workaround of redirecting output to a file and then to the console:
dir > a.txt | type a.txt
where dir is the command which output needs to be redirected, a.txt a file where to store output.
There's a Win32 port of the Unix tee command, that does exactly that. See http://unxutils.sourceforge.net/ or http://getgnuwin32.sourceforge.net/
Check this out: wintee
No need for cygwin.
I did encounter and report some issues though.
Also you might check unxutils because it contains tee (and no need for cygwin), but beware that output EOL's are UNIX-like here.
Last, but not least, is if you have PowerShell, you could try Tee-Object. Type get-help tee-object in PowerShell console for more info.
#tori3852
I found that
dir > a.txt | type a.txt
didn't work (first few lines of dir listing only - suspect some sort of process forking and the second part, the 'type' command terminated before the dire listing had completed? ),
so instead I used:
dir > z.txt && type z.txt
which did - sequential commands, one completes before the second starts.
A simple C# console application would do the trick:
using System;
using System.Collections.Generic;
using System.IO;
namespace CopyToFiles
{
class Program
{
static void Main(string[] args)
{
var buffer = new char[100];
var outputs = new List<TextWriter>();
foreach (var file in args)
outputs.Add(new StreamWriter(file));
outputs.Add(Console.Out);
int bytesRead;
do
{
bytesRead = Console.In.ReadBlock(buffer, 0, buffer.Length);
outputs.ForEach(o => o.Write(buffer, 0, bytesRead));
} while (bytesRead == buffer.Length);
outputs.ForEach(o => o.Close());
}
}
}
To use this you just pipe the source command into the program and provide the path of any files you want to duplicate the output to. For example:
dir | CopyToFiles files1.txt files2.txt
Will display the results of dir as well as store the results in both files1.txt and files2.txt.
Note that there isn't much (anything!) in the way of error handling above, and supporting multiple files may not actually be required.
Unfortunately there is no such thing.
Windows console applications only have a single output handle. (Well, there are two STDOUT, STDERR but it doesn't matter here) The > redirects the output normally written to the console handle to a file handle.
If you want to have some kind of multiplexing you have to use an external application which you can divert the output to. This application then can write to a file and to the console again.
This works, though it's a bit ugly:
dir >_ && type _ && type _ > a.txt
It's a little more flexible than some of the other solutions, in that it works statement-by-statement so you can use it to append as well. I use this quite a bit in batch files to log and display messages:
ECHO Print line to screen and log to file. >_ && type _ && type _ >> logfile.txt
Yes, you could just repeat the ECHO statement (once for the screen and the second time redirecting to the logfile), but that looks just as bad and is a bit of a maintenance issue. At least this way you don't have to make changes to messages in two places.
Note that _ is just a short filename, so you'll need to make sure to delete it at the end of your batch file (if you're using a batch file).
I’d like to expand a bit on Saxon Druce’s excellent answer.
As stated, you can redirect the output of an executable in the current directory like so:
powershell ".\something.exe | tee test.txt"
However, this only logs stdout to test.txt. It doesn’t also log stderr.
The obvious solution would be to use something like this:
powershell ".\something.exe 2>&1 | tee test.txt"
However, this won’t work for all something.exes. Some something.exes will interpret the 2>&1 as an argument and fail. The correct solution is to instead only have apostrophes around the something.exe and its switches and arguments, like so:
powershell ".\something.exe --switch1 --switch2 … arg1 arg2 …" 2^>^&1 ^| tee test.txt
Notice though, that in this case you have to escape the special cmd-shell characters ">&|" with a "^" each so they only get interpreted by powershell.
mtee is a small utility which works very well for this purpose. It's free, source is open, and it Just Works.
You can find it at http://www.commandline.co.uk.
Used in a batch file to display output AND create a log file simultaneously, the syntax looks like this:
someprocess | mtee /+ mylogfile.txt
Where /+ means to append output.
This assumes that you have copied mtee into a folder which is in the PATH, of course.
I agree with Brian Rasmussen, the unxutils port is the easiest way to do this. In the Batch Files section of his Scripting Pages Rob van der Woude provides a wealth of information on the use MS-DOS and CMD commands. I thought he might have a native solution to your problem and after digging around there I found TEE.BAT, which appears to be just that, an MS-DOS batch language implementation of tee. It is a pretty complex-looking batch file and my inclination would still be to use the unxutils port.
If you have cygwin in your windows environment path you can use:
dir > a.txt | tail -f a.txt
dir 1>a.txt 2>&1 | type a.txt
This will help to redirect both STDOUT and STDERR
I know this is a very old topic, but in previous answers there is not a full implementation of a real time Tee written in Batch. My solution below is a Batch-JScript hybrid script that use the JScript section just to get the output from the piped command, but the processing of the data is done in the Batch section. This approach have the advantage that any Batch programmer may modify this program to fit specific needs. This program also correctly process the output of CLS command produced by other Batch files, that is, it clear the screen when CLS command output is detected.
#if (#CodeSection == #Batch) #then
#echo off
setlocal EnableDelayedExpansion
rem APATee.bat: Asynchronous (real time) Tee program, Batch-JScript hybrid version
rem Antonio Perez Ayala
rem The advantage of this program is that the data management is written in Batch code,
rem so any Batch programmer may modify it to fit their own needs.
rem As an example of this feature, CLS command is correctly managed
if "%~1" equ "" (
echo Duplicate the Stdout output of a command in the screen and a disk file
echo/
echo anyCommand ^| APATee teeFile.txt [/A]
echo/
echo If /A switch is given, anyCommand output is *appended* to teeFile.txt
goto :EOF
)
if "%2" equ ":TeeProcess" goto TeeProcess
rem Get the output of CLS command
for /F %%a in ('cls') do set "cls=%%a"
rem If /A switch is not provided, delete the file that receives Tee output
if /I "%~2" neq "/A" if exist %1 del %1
rem Create the semaphore-signal file and start the asynchronous Tee process
echo X > Flag.out
if exist Flag.in del Flag.in
Cscript //nologo //E:JScript "%~F0" | "%~F0" %1 :TeeProcess
del Flag.out
goto :EOF
:TeeProcess
rem Wait for "Data Available" signal
if not exist Flag.in goto TeeProcess
rem Read the line sent by JScript section
set line=
set /P line=
rem Set "Data Read" acknowledgement
ren Flag.in Flag.out
rem Check for the standard "End Of piped File" mark
if "!line!" equ ":_EOF_:" exit /B
rem Correctly manage CLS command
if "!line:~0,1!" equ "!cls!" (
cls
set "line=!line:~1!"
)
rem Duplicate the line in Stdout and the Tee output file
echo(!line!
echo(!line!>> %1
goto TeeProcess
#end
// JScript section
var fso = new ActiveXObject("Scripting.FileSystemObject");
// Process all lines of Stdin
while ( ! WScript.Stdin.AtEndOfStream ) {
// Read the next line from Stdin
var line = WScript.Stdin.ReadLine();
// Wait for "Data Read" acknowledgement
while ( ! fso.FileExists("Flag.out") ) {
WScript.Sleep(10);
}
// Send the line to Batch section
WScript.Stdout.WriteLine(line);
// Set "Data Available" signal
fso.MoveFile("Flag.out", "Flag.in");
}
// Wait for last "Data Read" acknowledgement
while ( ! fso.FileExists("Flag.out") ) {
WScript.Sleep(10);
}
// Send the standard "End Of piped File" mark
WScript.Stdout.WriteLine(":_EOF_:");
fso.MoveFile("Flag.out", "Flag.in");
I was also looking for the same solution, after a little try, I was successfully able to achieve that in Command Prompt. Here is my solution :
#Echo off
for /f "Delims=" %%a IN (xyz.bat) do (
%%a > _ && type _ && type _ >> log.txt
)
#Echo on
It even captures any PAUSE command as well.
Something like this should do what you need?
%DATE%_%TIME% > c:\a.txt & type c:\a.txt
ipconfig >> c:\a.txt & type c:\a.txt
ping localhost >> c:\a.txt & type c:\a.txt
pause
Here's a sample of what I've used based on one of the other answers
#echo off
REM SOME CODE
set __ERROR_LOG=c:\errors.txt
REM set __IPADDRESS=x.x.x.x
REM Test a variable
if not defined __IPADDRESS (
REM Call function with some data and terminate
call :TEE %DATE%,%TIME%,IP ADDRESS IS NOT DEFINED
goto :EOF
)
REM If test happens to be successful, TEE out a message and end script.
call :TEE Script Ended Successful
goto :EOF
REM THE TEE FUNCTION
:TEE
for /f "tokens=*" %%Z in ("%*") do (
> CON ECHO.%%Z
>> "%__ERROR_LOG%" ECHO.%%Z
goto :EOF
)
send output to console, append to console log, delete output from current command
dir >> usb-create.1 && type usb-create.1 >> usb-create.log | type usb-create.1 && del usb-create.1
This is a variation on a previous answer by MTS, however it adds some functionality that might be useful to others. Here is the method that I used:
A command is set as a variable, that can be used later throughout the code, to output to the command window and append to a log file, using set _Temp_Msg_Cmd=
the command has escaped redirection using the carrot ^ character so that the commands are not evaluated initially
A temporary file is created with a filename similar to the batch file being run called %~n0_temp.txt that uses command line parameter extension syntax %~n0 to get the name of the batch file.
The output is appended to a separate log file %~n0_log.txt
Here is the sequence of commands:
The output and error messages are sent to the temporary file ^> %~n0_temp.txt 2^>^&1
The content of the temporary file is then both:
appended to the logfile ^& type %~n0_temp.txt ^>^> %~n0_log.txt
output to the command window ^& type %~n0_temp.txt
The temporary file with the message is deleted ^& del /Q /F %~n0_temp.txt
Here is the example:
set _Temp_Msg_Cmd= ^> %~n0_temp.txt 2^>^&1 ^& type %~n0_temp.txt ^>^> %~n0_log.txt ^& type %~n0_temp.txt ^& del /Q /F %~n0_temp.txt
This way then the command can simply be appended after later commands in a batch file that looks a lot cleaner:
echo test message %_Temp_Msg_Cmd%
This can be added to the end of other commands as well. As far as I can tell it will work when messages have multiple lines. For example the following command outputs two lines if there is an error message:
net use M: /D /Y %_Temp_Msg_Cmd%
Just like unix.
dir | tee a.txt
Does work On windows XP, it requires mksnt installed.
It displays on the prompt as well as appends to the file.
This is not another answer, but more an overview and clarification to the already existed answers like
Displaying Windows command prompt output and redirecting it to a file
and others
I've found for myself that there is a set of issues what makes a set of tee implementations are not reliable in the Windows (Windows 7 in mine case).
I need to use specifically a tee implementation because have already uses a batch script with self redirection:
#echo off
setlocal
... some conditions here ..
rem the redirection
"%COMSPEC%" /C call %0 %* 2>&1 | "<path_to_tee_utililty>" ".log\<log_file_name_with_date_and_time>.%~nx0.log"
exit /b
:IMPL
... here the rest of script ...
The script and calls to some utilities inside the script can break the output if used together with a tee utility.
The gnuwin32 implementation:
http://gnuwin32.sourceforge.net/packages/coreutils.htm
Pros:
Correctly handles standard output together with a console progress bar, where the \r character is heavily used.
Cons:
Makes console progress bars to draw only in a log file, but it has not duplicated or visible in the console window.
Throws multiple error messages Cwrite error: No such file or directory because seems the cmd interpreter closes the pipe/stdout too early and can not self close after that (spamming until termination).
Does not duplicate/print the output from the pause command (Press any key to continue...) in the console window.
The wintee implementation:
https://code.google.com/archive/p/wintee/
https://github.com/rbuhl/wintee
Pros:
Shows a console progress bar both in the console window and in a log file (multiple prints).
Does duplicate/print the output from the pause command (Press any key to continue...) in the console window.
Cons:
Incorrectly handles the \r character, output is mixed and messed (https://code.google.com/archive/p/wintee/issues/7 ).
Having other issues: https://code.google.com/archive/p/wintee/issues
The UnxUtils implementation:
http://unxutils.sourceforge.net/
https://sourceforge.net/projects/unxutils/files/unxutils/current/
Pros
Shows a console progress bar both in the console window and in a log file (multiple prints).
Correctly handles the \r character.
Does duplicate/print the output from the pause command (Press any key to continue...) in the console window.
Cons
Not yet found
The ss64.net implementation:
http://ss64.net/westlake/nt
http://ss64.net/westlake/nt/tee.zip
Pros:
Shows a console progress bar both in the console window and in a log file (multiple prints).
Cons:
Incorrectly handles the \r character, output is mixed and messed
For some reason does duplicate/print the output from the pause command (Press any key to continue...) in the console window AFTER a key press.
The ritchielawrence mtee implementation:
https://ritchielawrence.github.io/mtee
https://github.com/ritchielawrence/mtee
Pros
Shows a console progress bar both in the console window and in a log file (multiple prints).
Correctly handles the \r character.
Does duplicate/print the output from the pause command (Press any key to continue...) in the console window.
The error code retain feature w/o a need to use workaround with the doskey (/E flag, Windows command interpreter: how to obtain exit code of first piped command )
Cons
Does not support forward slash characters in the path to a log file (https://github.com/ritchielawrence/mtee/issues/6 )
Has a race condition issue, when can not extract a pipe process exit code because it has closed before it's access (https://github.com/ritchielawrence/mtee/issues/4 )
So, if you are choosing the tee utility implementation between the above, then a better choice is the UnxUtils or mtee.
If you are searching for a better implementation with more features and less issues, then you can use callf utility:
https://github.com/andry81/contools/blob/trunk/Utilities/src/callf/help.tpl
You can run instead of:
call test.bat | mtee /E 1.log
This:
callf.exe /ret-child-exit /tee-stdout 1.log /tee-stdout-dup 1 "" "cmd.exe /c call test.bat"
It is better because it can pipe stdout separately from stderr and you can even pipe between processes with Administrator privileges isolation using named pipes.
#echo on
set startDate=%date%
set startTime=%time%
set /a sth=%startTime:~0,2%
set /a stm=1%startTime:~3,2% - 100
set /a sts=1%startTime:~6,2% - 100
fullprocess.bat > C:\LOGS\%startDate%_%sth%.%stm%.%sts%.LOG | fullprocess.bat
This will create a log file with the current datetime and you can the console lines during the process
I use a batch subroutine with a "for" statement to get the command output one line at a time and both write that line to a file and output it to the console.
#echo off
set logfile=test.log
call :ExecuteAndTee dir C:\Program Files
Exit /B 0
:ExecuteAndTee
setlocal enabledelayedexpansion
echo Executing '%*'
for /f "delims=" %%a in ('%* 2^>^&1') do (echo.%%a & echo.%%a>>%logfile%)
endlocal
Exit /B 0
If you're on the CLI, why not use a FOR loop to "DO" whatever you want:
for /F "delims=" %a in ('dir') do #echo %a && echo %a >> output.txt
Great resource on Windows CMD for loops: https://ss64.com/nt/for_cmd.html
The key here is setting the delimeters (delims), that would break up each line of output, to nothing. This way it won't break on the default of white-space. The %a is an arbitrary letter, but it is used in the "do" section to, well... do something with the characters that were parsed at each line. In this case we can use the ampersands (&&) to execute the 2nd echo command to create-or-append (>>) to a file of our choosing. Safer to keep this order of DO commands in case there's an issue writing the file, we'll at least get the echo to the console first. The at sign (#) in front of the first echo suppresses the console from showing the echo-command itself, and instead just displays the result of the command which is to display the characters in %a. Otherwise you'd see:
echo Volume in drive [x] is Windows Volume in drive [x] is Windows
UPDATE: /F skips blank lines and only fix is to pre-filter the output adding a character to every line (maybe with line-numbers via the command find). Solving this in CLI isn't quick or pretty. Also, I didn't include STDERR, so here's capturing errors as well:
for /F "delims=" %a in ('dir 2^>^&1') do #echo %a & echo %a >> output.txt
Redirecting Error Messages
The carets (^) are there to escape the symbols after them, because the command is a string that's being interpreted, as opposed to say, entering it directly on the command-line.
I just found a way to use the perl as alternative, e.g.:
CMD1 | perl -ne "print $_; print STDERR $_;" 2> OUTPUT.TEE
Following helps if you want something really seen on the screen - even if the batch file was redirected to a file. The device CON maybe used also if redirected to a file
Example:
ECHO first line on normal stdout. maybe redirected
ECHO second line on normal stdout again. maybe redirected
ECHO third line is to ask the user. not redirected >CON
ECHO fourth line on normal stdout again. maybe redirected
Also see good redirection description: http://www.p-dd.com/chapter7-page14.html
How do I display and redirect output
to a file. Suppose if I use dos
command, dir > test.txt ,this command
will redirect output to file test.txt
without displaying the results. how to
write a command to display the output
and redirect output to a file using
DOS i.e., windows command prompt, not
in UNIX/LINUX.
You may find these commands in biterscripting ( http://www.biterscripting.com ) useful.
var str output
lf > $output
echo $output # Will show output on screen.
echo $output > "test.txt" # Will write output to file test.txt.
system start "test.txt" # Will open file test.txt for viewing/editing.
This works in real time but is also kind a ugly and the performance is slow. Not well tested either:
#echo off
cls
SET MYCOMMAND=dir /B
ECHO File called 'test.bat' > out.txt
for /f "usebackq delims=" %%I in (`%MYCOMMAND%`) do (
ECHO %%I
ECHO %%I >> out.txt
)
pause
An alternative is to tee stdout to stderr within your program:
in java:
System.setOut(new PrintStream(new TeeOutputStream(System.out, System.err)));
Then, in your dos batchfile: java program > log.txt
The stdout will go to the logfile and the stderr (same data) will show on the console.
I install perl on most of my machines so an answer using perl: tee.pl
my $file = shift || "tee.dat";
open $output, ">", $file or die "unable to open $file as output: $!";
while(<STDIN>)
{
print $_;
print $output $_;
}
close $output;
dir | perl tee.pl
or
dir | perl tee.pl dir.bat
crude and untested.

Resources