I need help on the query to insert a value from one table to another. I have three tables, two contains email transaction volume data (Email_Transaction_Volume_13052020 and Email_Transaction_Volume_14052020) and another one in which i need to capture the volume for each subs to (daily_transaction_monitoring_working). Below is my query.
insert into daily_transaction_monitoring_working (Carry_Forward )
select sum(case_count_sum)
from Email_Transaction_Volume_13052020 as b
where
b.status in ('Assigned', 'Awaiting Response', 'Internal Hold') and
b.Email_Source_Case = 'ssc.tseparts'
insert into daily_transaction_monitoring_working (Incoming)
select sum(case_count_sum)
from Email_Transaction_Volume_14052020 as b
where
b.status in ('Closed', 'No Response Required') and
b.Email_Source_Case = 'ssc.tseparts';
However, this resulted into inserting the value incoming and and carry forward into two rows (as shown below). Meanwhile I need it to be on the same row. Could anyone please help me with this. Thank you in advance.
You may provide two subqueries as the source of data for the record you want to insert:
INSERT INTO daily_transaction_monitoring_working (Carry_Forward, Incoming)
(
SELECT SUM(case_count_sum)
FROM Email_Transaction_Volume_13052020
WHERE
status IN ('Assigned', 'Awaiting Response', 'Internal Hold') AND
Email_Source_Case = 'ssc.tseparts'
),
(
SELECT SUM(case_count_sum)
FROM Email_Transaction_Volume_14052020
WHERE
status IN ('Closed', 'No Response Required') AND
Email_Source_Case = 'ssc.tseparts'
);
Related
Record to update
select *
from Event_Measurable em
join Observation_Measurable om on em.Event_GUID = om.Event_GUID
where observation_guid in (8786975, 285886, 85976, 786976)
Update these records as follows:
set observation_value_text = '.',
observation_value_numeric = NULL,
om.status = 'D',
em.status = 'D',
I need help to update and set this values from the results of the query above. Can any help me. I have tried to update the table but it failed.
Try this:
update X set
observation_value_text = '.'
, observation_value_numeric = NULL
, om.status = 'D'
, em.status = 'D'
from
(
select
*
from Event_Measurable em
join Observation_Measurable om on em.Event_GUID = om.Event_GUID
where observation_guid in (8786975, 285886, 85976, 786976)
) X
Let me know if it works?
Your set list references multiple tables: that is invalid as only one table can be updated with one statement. You need to run 2 update statements so you either repeat the join in the second update or first put the result in a temp table and join that to the actual to-be-updated table. You might want to put the whole thing to a transaction to be able to roll back on error. See this reference.
I am trying to implement Slowly Changing Dimension Type 2 through T-SQL but I can't figure out how to put a request to work.
Table columns: cpf, nome, telefone_update, endereco_insert
Basically the logic is: if the MATCH doesn't happen using cpf, then the record must be inserted; if the MATCH happens but only the telefone_update field has changed, there is no need to another record and I just want to UPDATE and override the values; if the MATCH happens but only the endereco_insert field has changed I want to add a new record and update the start and end dates.
What I have so far is:
insert into #dm_lucas_tst (
[cpf],
[nome],
[telefone_update],
[endereco_insert],
[dt_scd_start],
[dt_scd_end],
[nu_scd_version]
)
select [cpf],
[nome],
[telefone_update],
[endereco_insert],
cast(dateadd(month, datediff(month, 0, getdate()), 0) as date) as [dt_scd_start],
'2199-12-31' AS [dt_scd_end],
1 AS [nu_scd_version]
from (
merge edw.dim.dm_lucas_tst as Target
using edw.dim.stg_lucas_tst as Source
on Target.cpf = Source.cpf
when not matched by target
then
insert (
[cpf],
[nome],
[telefone_update],
[endereco_insert],
[dt_scd_start],
[dt_scd_end],
[nu_scd_version]
)
values (
Source.[cpf],
Source.[nome],
Source.[telefone_update],
Source.[endereco_insert],
cast(dateadd(month, datediff(month, 0, getdate()), 0) as date),
'2199-12-31',
1
)
when matched
and Source.telefone_update <> Target.telefone_update
and Target.dt_scd_end = '2199-12-31'
then
update set telefone_update = Source.telefone_update
output $ACTION ActionOut,
Source.[cpf],
Source.[nome],
Source.[telefone_update],
Source.[endereco_insert]
) AS MergeOut
where MergeOut.ActionOut = 'UPDATE';
But I don't think putting another WHEN MATCH AND ... will make that work.
Any suggestions?
Thanks in advance!
Accordingly to your description, I'm assuming that you need:
SCD Type 1 for column [telefone_update]
SCD Type 2 for column [endereco_insert]
I've used application SCD Merge Wizard to easily create described logic.
When I made tests for it - everything looks as expected, I guess.
I described the process on my blog - please have a look and tell me if that was exactly what you wanted?
https://sqlplayer.net/2018/01/scd-type-1-type-2-in-merge-statement/
I have a stored proc with the below query to insert/update using a MERGE in SQL Server but the query works fine for update, but its not working for Insert.
Although I gets correct updated records in Target but for new inserts, it fails.
Basically, i have 4 tables.SUPPORT_STAFF_BAK is the target table which needs to be updated from source table UNIQUE_DUP_TEST based on few conditions from other two tables(REF_FUNCTION,DATA_PERIOD) which i tried to fulfill using joins.
Based on the conditions, we need to check in target, if the same ggid exists for current data_period we need to update it else we need to insert new record again, based on the condition.
MERGE SUPPORT_STAFF_BAK AS SUPP_STAFF
USING
(SELECT G_UNIQUE.[GLOBAL_ID],
G_UNIQUE.[FIRST_NAME],
G_UNIQUE.[LAST_NAME],
G_UNIQUE.[EMAIL],
G_UNIQUE.[Gender],
G_UNIQUE.[DATE_OF_BIRTH],
G_UNIQUE.[PRODUCTION_UNIT_CODE],
ORG.[LEGAL_ENTITY_COUNTRY_CODE],
ORG.[LEGAL_ENTITY_COUNTRY],
G_UNIQUE.[JOB_NAME],
ORG.[BU_CODE],
ORG.[BU_NAME],
ORG.[SBU_CODE],
ORG.[SBU_NAME],
G_UNIQUE.[GRADE_LETTER],
CASE
WHEN G_UNIQUE.[EMPLOYEE_STATUS] = 'A' THEN 'Active'
WHEN G_UNIQUE.[EMPLOYEE_STATUS] = 'S' THEN 'Suspended'
WHEN G_UNIQUE.[EMPLOYEE_STATUS]= 'T' THEN 'Terminated'
END AS [EMPLOYEE_STATUS],
CASE WHEN G_UNIQUE.[CATEGORY] = 'DSS' THEN G_UNIQUE.[CATEGORY_DETAIL] ELSE ''
END AS [CATEGORY],
G_UNIQUE.[CATEGORY_DETAIL],
G_UNIQUE.[FIRST_JOINING_DATE],
PERIOD.DATA_PERIOD_ID
FROM UNIQUE_DUP_TEST G_UNIQUE
INNER JOIN GDH_ORG ORG
ON G_UNIQUE.PRODUCTION_UNIT_CODE=ORG.PRODUCTION_UNIT_CODE
INNER JOIN REF_FUNCTION FUNC
ON G_UNIQUE.CATEGORY_DETAIL=FUNC.FUNCTION_CODE
INNER JOIN DATA_PERIOD PERIOD
ON FUNC.FUNCTION_ID=PERIOD.FUNCTION_ID
WHERE PERIOD.DATA_YEAR=YEAR(GETDATE()) AND PERIOD.DATA_MONTH=MONTH(GETDATE())
) AS G_SOURCE
ON SUPP_STAFF.GGID = G_SOURCE.GLOBAL_ID AND SUPP_STAFF.PRODUCTION_UNIT_CODE=G_SOURCE.PRODUCTION_UNIT_CODE
AND SUPP_STAFF.DATA_PERIOD_ID=G_SOURCE.DATA_PERIOD_ID
WHEN MATCHED THEN
UPDATE SET
[SUPP_STAFF].[FIRST_NAME] = G_SOURCE.[FIRST_NAME],
[SUPP_STAFF].[LAST_NAME] = G_SOURCE.[LAST_NAME],
[SUPP_STAFF].[EMAIL] = G_SOURCE.[EMAIL],
[SUPP_STAFF].[GENDER] = G_SOURCE.[Gender],
[SUPP_STAFF].[DATE_OF_BIRTH] = G_SOURCE.[DATE_OF_BIRTH],
[SUPP_STAFF].[LEGAL_ENTITY_COUNTRY_CODE] = G_SOURCE.[LEGAL_ENTITY_COUNTRY_CODE],
[SUPP_STAFF].[LEGAL_ENTITY_COUNTRY_NAME] = G_SOURCE.[LEGAL_ENTITY_COUNTRY],
[SUPP_STAFF].[GCM_ROLE] = G_SOURCE.[JOB_NAME],
[SUPP_STAFF].[BU_CODE] = G_SOURCE.[BU_CODE],
[SUPP_STAFF].[BU_NAME] = G_SOURCE.[BU_NAME],
[SUPP_STAFF].[SBU_CODE] = G_SOURCE.[SBU_CODE],
[SUPP_STAFF].[SBU_NAME] = G_SOURCE.[SBU_NAME],
[SUPP_STAFF].[GRADE] = G_SOURCE.[GRADE_LETTER],
[SUPP_STAFF].[EMPLOYEE_STATUS] = G_SOURCE.[EMPLOYEE_STATUS],
[SUPP_STAFF].[EMPLOYEE_CATEGORY] = G_SOURCE.[CATEGORY],
[SUPP_STAFF].[START_DATE] = G_SOURCE.[FIRST_JOINING_DATE],
[SUPP_STAFF].[UPDATE_DATE] = GETDATE(),
[SUPP_STAFF].[UPDATE_USER] = CASE WHEN G_SOURCE.[EMPLOYEE_STATUS]='Terminated' THEN 'Delete'
WHEN G_SOURCE.[EMPLOYEE_STATUS]<>'Terminated' THEN 'Update'
END,
[SUPP_STAFF].[SUPPORT_STAFF_FUNCTION] = CASE WHEN G_SOURCE.[EMPLOYEE_STATUS]='Terminated' THEN NULL
WHEN G_SOURCE.[EMPLOYEE_STATUS]<>'Terminated' THEN G_SOURCE.[CATEGORY_DETAIL]
END
WHEN NOT MATCHED AND G_SOURCE.[CATEGORY] = 'CC1'
AND G_SOURCE.[EMPLOYEE_STATUS] IN ('A, S')
THEN
INSERT( [GGID],
[FIRST_NAME],
[LAST_NAME],
[EMAIL],
[GENDER],
[DATE_OF_BIRTH],
[LEGAL_ENTITY_COUNTRY_CODE],
[LEGAL_ENTITY_COUNTRY_NAME],
[GCM_ROLE],
[BU_CODE],
[BU_NAME],
[SBU_CODE],
[SBU_NAME],
[GRADE],
[EMPLOYEE_STATUS],
[EMPLOYEE_CATEGORY],
[START_DATE],
[UPDATE_DATE],
[UPDATE_USER],
[SUPPORT_STAFF_FUNCTION]
)
VALUES (
G_SOURCE.[GLOBAL_ID],
G_SOURCE.[FIRST_NAME],
G_SOURCE.[LAST_NAME],
G_SOURCE.[EMAIL],
G_SOURCE.[Gender],
G_SOURCE.[DATE_OF_BIRTH],
G_SOURCE.[LEGAL_ENTITY_COUNTRY_CODE],
G_SOURCE.[LEGAL_ENTITY_COUNTRY],
G_SOURCE.[JOB_NAME],
G_SOURCE.[BU_CODE],
G_SOURCE.[BU_NAME],
G_SOURCE.[SBU_CODE],
G_SOURCE.[SBU_NAME],
G_SOURCE.[GRADE_LETTER],
G_SOURCE.[EMPLOYEE_STATUS],
G_SOURCE.[CATEGORY_DETAIL],
G_SOURCE.[FIRST_JOINING_DATE],
GETDATE(),
'Insert',
G_SOURCE.[CATEGORY_DETAIL]
)
OUTPUT $action,
INSERTED.GGID AS GGID;
SELECT ##ROWCOUNT;
One of your assumptions is wrong. Either the source query has less rows than you think, or there is a match, or the insert condition is not met. Otherwise the query is OK.
To debug this I'd insert the source query into a temp table and manually inspect its contents to make sure they are what you expect.
You can then join to the target to see if your inserts maybe are converted to updates (e.g. select * from Source join Target on ...). Internally, a MERGE is just a full outer join anyway and you can reproduce that manually.
Right now nobody can tell you the exact answer. You need to debug this yourself and examine your data.
Finally I found the error. The error was at the below 2 places -
CASE WHEN G_UNIQUE.[CATEGORY] = 'DSS' THEN G_UNIQUE.[CATEGORY_DETAIL] ELSE '' END AS [CATEGORY],
I replaced it with
CASE WHEN G_UNIQUE.[CATEGORY] = 'DSS' THEN G_UNIQUE.[CATEGORY_DETAIL] ELSE ''
END AS [EMPLOYEE_FUNCTION],
Also I included one more column in my Source query which was missing-
G_UNIQUE.[CATEGORY],
Also, there below wrong code
WHEN NOT MATCHED AND G_SOURCE.[CATEGORY] = 'CC1'
AND G_SOURCE.[EMPLOYEE_STATUS] IN ('A, S')
was replaced by the below correct code-
WHEN NOT MATCHED AND G_SOURCE.[CATEGORY] = 'CC1'
AND G_SOURCE.[EMPLOYEE_STATUS] IN ('Active', 'Suspended')
Actually, I was missing 1 source column and was checking the value for the same while inserting and hence the insert was failing.
Also,in the source for Employee_status i checked the values as A,S and T and then replaced them with Active,Suspended,Terminated but while inserting in the When not matched , i was checking the value for A,S,T which every time was returning false and hence insert failed.
I have a table in which I need to update one column with ticketnumbers.
These ticketnumbers are created in another table where it is an identity field.
This code doesn't work. Why?
UPDATE sheet10
SET [TicketNummer] = (INSERT INTO ticketnummers (AangemaaktOp, aangemaaktdoor,verwijderd,afgewezen) VALUES ('2014-01-20 15:00:00',100,0,0) SELECT SCOPE_IDENTITY() )
where isnumeric([TicketNummer]) = 0
What am I doing wrong?
rg.
Eric
Composable DML should let you INSERT only if the UPDATE has a row matching
However...
how do you correlate rows?
What happens for concurrent inserts?
What if multiple rows have no TicketNummer value in sheet10
and many other questions
In summary, this is possible even if I'd never actually do it given the design questions
UPDATE
sheet10
SET
TicketNummer = (
SELECT
*
FROM
(
INSERT INTO ticketnummers (AangemaaktOp, aangemaaktdoor,verwijderd,afgewezen)
OUTPUT INSERTED.IDColumn
VALUES ('2014-01-20 15:00:00', 100, 0, 0)
) X
)
WHERE
ISNULL(TicketNummer, 0) = 0;
You cannot use INSERT in this way. It has to be statement on its own.
Basically you have to perform this operation in 2 steps:
INSERT INTO ticketnummers (AangemaaktOp, aangemaaktdoor,verwijderd,afgewezen) VALUES ('2014-01-20 15:00:00',100,0,0);
UPDATE sheet10
SET [TicketNummer] = SCOPE_IDENTITY()
where ISNULL([TicketNummer], 0) = 0
Report needs option to select multiple super product types
Selection of multiple super product types?
IF #superProductType = 'ALL'
INSERT INTO #ProductDetails
SELECT pt_sp_type_c, pt_sb_type_c
FROM product..p_type_p_type
WHERE pt_sp_type_c NOT IN ('EQUITY','OPTEQTY')
AND p_type_use_sp_c= 'RPCDB'
AND p_type_use_sb_c = 'TRD'
AND pt_rel_stat_c = 'ACTIVE'
ELSE
INSERT INTO #ProductDetails
SELECT pt_sp_type_c, pt_sb_type_c
FROM product..p_type_p_type
WHERE pt_sp_type_c NOT IN ('EQUITY','OPTEQTY')
AND pt_sp_type_c IN (#superProductType)
AND p_type_use_sp_c= 'RPCDB'
AND p_type_use_sb_c = 'TRD'
AND pt_rel_stat_c = 'ACTIVE'
I have a parameter here #super product type,can anyone help me how to change this code
Here in this code i need to make some changes: ---parameter is #superProductType
The above code was for the option to select multiple super product types
when i select All and one value from the drop down list like 'ALL','ASKF'
both the above conditions in the code if else will fail
It should not get selected ALL and other ASKF at the same time
either should has to select
How can we differentiate that ALL not selecting ALL from together
if we select ALL remaining values in the drop down list must be deleted
It should not have two values selected together IF ALL only ALL has to select remaining should discard
I am not sure how to eliminate the rest of values in the drop down list
looking for suitable solution,can anybody see the code abnove and tell me what is the change i have to do in the code.
If you have set the SSRS parameter to Multivalue then you should change the query to use IN (#ParamName) syntax. so your query would become:
IF #superProductType = 'ALL'
INSERT INTO #ProductDetails
SELECT pt_sp_type_c, pt_sb_type_c
FROM product..p_type_p_type
WHERE pt_sp_type_c NOT IN ('EQUITY','OPTEQTY')
AND p_type_use_sp_c= 'RPCDB'
AND p_type_use_sb_c = 'TRD'
AND pt_rel_stat_c = 'ACTIVE'
ELSE
INSERT INTO #ProductDetails
SELECT pt_sp_type_c, pt_sb_type_c
FROM product..p_type_p_type
WHERE pt_sp_type_c NOT IN ('EQUITY','OPTEQTY')
AND pt_sp_type_c IN ( #superProductType )
AND p_type_use_sp_c= 'RPCDB'
AND p_type_use_sb_c = 'TRD'
AND pt_rel_stat_c = 'ACTIVE'