Hugo was running fine locally until this happened...
I'm in the same folder (check the ls), the folder is a hugo website, and the config.toml is named properly. What gives?
Hugo error pic
Edit #1: I ran hugo new site TEST, then cd TEST and tried to run the server again... got the same error...
the reason for your error message is that you use the command hugo server -D incorrectly.
In your screen shot you execute the command like this: hugo -server -D
The dash before the server makes hugo misinterpret the command and you get the error message you mention.
The correct command is: hugo server -D
To run your site locally with a real-time content watcher, the command is hugo serve (drop the dash before serve).
Related
I'm trying to run the most basic react app possible and run it locally. I have referred to the startup docs: https://reactjs.org/docs/create-a-new-react-app.html
I run the app using both npm start from the docs and yarn start as indicated in the terminal. The result in the terminal looks like this:
My app appears to be running, but the IP address looks wrong. When I copy and paste this into my browser's address bar or try localhost:3000, my page does not load.
Other solutions I tried after referencing other StackOverflow threads:
restarting my computer
changing the port to another port
deleting and rebuilding the node_modules folder with yarn
None of those worked. What can I do to fix this?
I ran the command unset HOST in the terminal just before starting up my app and this worked.
Also, several other threads have referenced this article: https://choy.medium.com/fixing-create-react-app-when-npm-fails-to-start-because-your-host-environment-variable-is-being-4c8a9fa0b461
To set your localhost in .bash_profile do the following in the terminal...
Open bash profile in nano
nano .bash_profile
type HOST="localhost" and save this file
back in the terminal, type
source .bash_profile
I am trying to install allure in MAC not able to it.
I am getting the error "-bash: allure: command not found".
I have downloaded allure-commandline-2.9.0.tgz and allure-commandline-2.9.0.zip from the below link: https://repo.maven.apache.org/maven2/io/qameta/allure/allure-commandline/2.9.0/
I tried with both but it is not working.
Steps I have followed:
download the .tgz or .zip file.
unzip/untar the file.
set /allure-2.9.0/bin dir to the PATH variable.
Restart the terminal.
trying to run allure --version command.
But I am getting the error "-bash: allure: command not found".
Your installation folder of the tool is not /allure-2.9.0/bin
A good practise is to create a "bin" folder inside your user-account: "~/bin" and include this to the $PATH environment. From now on you can link or copy your extracted tool from e.g. ~/Downloads/allure-2.9.0/bin to ~/bin
You don't have to extend the PATH variable for each new tool.
I am new to appengine and have installed google-cloud-sdk from the AUR(arch user repository) and and the google-appengine-go extention at /opt/google-cloud-sdk
thanks to this I am able to run a dev server using
dev_appserver.py app.yaml
But when using goapp serve I found
goapp: command not found
After adding /opt/google-cloud-sdk/platform/google_appengine:$PATH to my $PATH variable in zshrc and running goapp serve i now get the error.
zsh: permission denied: goapp
if sudo goapp serve
sudo: goapp: command not found
Due to this I am unable to use the updated sdk to run tests using goapp test
Thank you in advance for your help.
I had the same problem and I think I figured out how it usually works.
You download the google cloud sdk (https://cloud.google.com/sdk/downloads)
After downloading and unzipping to the folder where you want to use it you have to executet the ./google-cloud-sdk/install.sh.
Appengine is not part of the download.
It can be chosen with that install.sh script.
it will download items like appengine.
Afterwards you have a folder called
platform/google_appengine
as you mentioned yourself.
You might have to change execution permissions like
chmod 755 platform/google_appengine/go*
Add folder platform/google_appengine to the PATH if not done already.
The command "which" will not show non-executable binaries.
If you did not change permissions it will not show the path, even being within the PATH variable.
Trying to run gcloud init to initialize the Google App Engine Engine SDK by typing ./google-cloud-sdk/bin/gcloud init but it showed: no such file or directory or command not found. Is something wrong with my PATH? My path is:
/Users/AnneLutz/Documents/google-cloud-sdk\
If you typing ./google-cloud-sdk/bin/gcloud init and you installed Cloud SDK in /Users/AnneLutz/Documents/google-cloud-sdk, then your current directory should be /Users/AnneLutz/Documents in order for what you type to work.
That said you should add /Users/AnneLutz/Documents/google-cloud-sdk/bin to you path. To do this, assuming you are using bash you can
source /Users/AnneLutz/Documents/google-cloud-sdk/path.bash.inc
To make it so that every-time you start your shell you can add it to shell profile. For example you can add above source command at the end of ~/.bash_profile file.
It looks like you used the option to download the SDK zip file and are then trying to configure your environment with that download option. If you aren't comfortable with setting environment variables, you might want to instead try installing using the "interactive" installer, which will automate the steps for making the commands always available on your system.
The directions are here, but for Mac OS users are basically:
Enter the following at a command prompt:
curl https://sdk.cloud.google.com | bash
Restart your shell:
exec -l $SHELL
Run gcloud init to initialize the gcloud environment:
gcloud init
For many, this procedure is easier than getting everything configured manually.
Morning,
My production build seems to be missing getOrientation function.
It seems that sencha-touch-all.js is not being copied into the build folder.
After doing much forum reading, etc, I have discovered that I actually need to use Cmd to create an all-classes.js file.
According to http://docs.sencha.com/touch/2.2.0/#!/guide/building, the following command should do the job:
sencha create jsb -a index.html -p app.jsb3
When I run this in command from within the root of my app (where index.html lives), I get the following error:
[ERR] Unknown command: "create"
I have tried using commands generate or build instead of create but they do not work either.
So, why does it not recognise that command?
When I run the command from within my SenchaSDKTools folder, but use the full path/to/app,
it seems to accept the command, but does not create a file.
I have sencha touch 2.2.1 and Cmd 3.1.2.342
In order for you to use sencha create jsb command, you have to:
Install Sencha SDK Tools
Mac - http://cdn.sencha.io/sdk-tools/SenchaSDKTools-2.0.0-beta3-osx.app.zip
Windows - http://cdn.sencha.io/sdk-tools/SenchaSDKTools-2.0.0-beta3-windows.exe
Open terminal and change directory to where the Sencha SDK is installed.
cd /Applications/SenchaSDKTools-2.0.0-beta3/
Generate a JSB3 file by executing the ff. command:
/sencha create jsb -a index.html -p app.jsb3
wherein:
-a (required) The location of the HTML file containing the scripts you want to include
-p (required) The location where the output .jsb3 file should be created
This scans your index.html file for all framework and application files that are actually used by the app, and then creates a JSB file called app.jsb3.
SOLVED:
It was working fine from within the SenchaSDKtools folder. I hadn't told it the right place to create the file.