If I move an accented file to the same directory using the command prompt, it works correctly.
move ó.mp3 ó.mp3
However, when I use the same command in a .bat file, the following error appears: the system cannot find the file specified.
#echo off
move ó.mp3 ó.mp3
pause
A flagrant mojibake case. I guess that you save the script using Windows' native notepad editor using co-called ANSI encoding. The following commented code snippet could enlighten the problem:
#ECHO OFF
SETLOCAL EnableExtensions
REM save current code page (optional)
for /F "tokens=1* delims=:" %%G in ('CHCP') do set "_currentCP=%%H"
REM find notepad's ("ANSI") code page
for /F "tokens=1,2*" %%G in ('
REG QUERY "HKLM\SYSTEM\CurrentControlSet\Control\Nls\CodePage" -v ACP^|find "ACP"
') do set "_notepadCP=%%I"
REM show flagrant mojibake case
echo %_currentCP%: move ó.mp3 óó.mp3
REM change the active console code page and show right result
>NUL CHCP %_notepadCP%
echo %_notepadCP%: move ó.mp3 óó.mp3
REM reurn the active console code page to saved value (optional)
>NUL CHCP %_currentCP%
pause
Result:
D:\bat\SO\61743331.bat
852: move ˇ.mp3 ˇˇ.mp3
1250: move ó.mp3 óó.mp3
I see above output on my (Central European) Windows. On Western Windows, you could see something like
850: move ¾.mp3 ¾¾.mp3
1252: move ó.mp3 óó.mp3
You should change the code page with this command CHCP /?
#echo off
CHCP 65001>nul
move ó.mp3 ó.mp3
pause
Related
I am trying to rename every image in a directory to add the date that each file was created, however, I keep either getting "invalid syntax" or "A duplicate file name exists, or the file cannot be found"
I am running Windows 10, and accessing the images off a flash drive (hence the short file path). I tried having all the code in one for-loop, when that didn't work I tried using batch functions, no dice. I did see someone mention on another thread to use delayed expansion, I would be up for using this if someone could give a better explanation than the /? command.
#echo off
REM batch file is placed in top of F drive, same as "images 2017+"
cd "F:\images 2017+"
FOR /R "F:\images 2017+" %%F in (*.jpg) do call :renER "%%~nF" "%%~tF"
goto :eof
:renER
cd "F:\images 2017+"
pause
echo %1
echo %2
rename %1.jpg %1_%2.jpg
pause
goto :eof
:end
For every .jpg file in "images 2017+", the date which that file was created would be stuck onto the end after a space.
thisIsMyFile.jpg made at 5-13-2017, would become thisIsMyFile 5-13-2017.jpg
Current output
EDIT:
I am CDing into the same directory as the images are, then using the passed variables to locate the correct image (The date is one of the passed variables, and shows up in the echo command).
I notice that you only want the date, not the time so you can do that as follows using your existing Call to a label, There is also no need to use FOR /R in this case so I'll use a normal for loop:
#echo off
FOR %%A IN ("F:\images 2017+\*.jpg") DO (
CALL :RenER "%%~fA" %%~tA
)
GOTO :eof
:RenER
PAUSE
ECHO %1
ECHO %2
SET "_tmp=%~2"
SET "_tmp=%tmp:/=-"
REN "%~1" "%~n1_%_tmp%%~x1"
PAUSE
GOTO :eof
Notice how above we are dropping the Time off immediately by not wrapping it in quotes since you don't want that to be part of the file name.
You can also forgo the call to a label entirely without needing delayed expansion by using a second loop, as a matter of preference I think this is quite a bit cleaner!
#echo off
FOR %%A IN ("F:\images 2017+\*.jpg") DO (
FOR /F "Tokens=1-3 Delims=/ " %%a IN ('echo.%%~tA') DO (
PAUSE
ECHO.%%~fA
ECHO.%%~tA
REN "%%~fA" "%%~nA_%%a-%%b-%%c%%~xA"
PAUSE
)
)
this is nice and clean and with a minor edit we can paste it directly into the CMD Prompt which is nicer still This is because we are not using DelayedExpansion, Calling a Label, or using Temp variables so by changing the %%s to %s, we can then Paste this directly into the CMD Line which is often more convenient when doing these sorts of operations:
This Multi-line will do just fine to be pasted into CMD directly:
FOR %%A IN ("F:\images 2017+\*.jpg") DO (
FOR /F "Tokens=1-3 Delims=/ " %a IN ('echo.%~tA') DO #(
PAUSE
ECHO.%~fA
ECHO.%~tA
REN "%~fA" "%~nA_%a-%b-%c%~xA"
PAUSE
)
)
or, as a single line to paste into CMD if you prefer:
FOR %A IN ("F:\images 2017+\*.jpg") DO #( FOR /F "Tokens=1-3 Delims=/ " %a IN ('echo.%~tA') DO #( PAUSE& ECHO.%~fA& ECHO.%~tA& REN "%~fA" "%~nA_%a-%b-%c%~xA"& PAUSE ) )
no need to cd anywhere. ren takes a full path/filename for source - just the destination must be a filename only. So ... do call :renER "%%~fF" "%%~tF" is fine (no need to snip the extension and add it again later). In the subroutine reformat the time to a valid string and reassemble the destination file name:
#echo off
FOR /R "F:\images 2017+" %%F in (*.jpg) do call :renER "%%~fF" "%%~tF"
goto :eof
:renER
pause
echo %1
echo %2
set "string=%~2"
set "string=%string::=-%"
set "string=%string:/=-"
ECHO rename "%~1" "%~n1_%string%%~x1"
pause
goto :eof
:end
NOTE: I disarmed the rename command. Remove the ECHO after troubleshooting, if it works as intended.
#Stephan's answer is probably the best approach. But if you want to change directories ...
The windows shell has a working drive/volume, and on each drive/volume a current working folder. cd changes the working folder on a disk; to change the working folder on a drive (which is not the working drive) and to make that drive the working drive, you need to use cd /d, in this case cd /d "F:\images 2017+".
(A plain cd in this instance changes the working folder on F:\, but if your working folder is on C: -- as I'm guessing is the case -- it will not be changed.)
Assuming command extensions are enabled, you should also be able to use pushd and popd. pushd behaves like cd /d but also saves your previous location; popd returns you to that previous location. (And IIRC pushd will accept UNC paths.)
So at the beginning of your script, pushd "F:\images 2017+", and at the end popd.
I tend to favor pushd/popd over cd because invocations can be nested. So you can do things like
(assume working directory is C:\Users\IoCalisto):
pushd "F:\images 2017+"
(working directory is now F:\images 2017+)
pushd "Z:\images 2015-2016"
(working directory is now Z:\images 2015-2016)
popd
(working directory is now F:\images 2017+)
popd
(working directory is now C:\Users\IoCalisto)
... with this approach, your scripts will have fewer "side effects" and be more modular, or at least modularizable.
#echo off
:prep
cls
for /f "tokens=2-4 delims=/ " %%a in ('date /t') do (set mydate=%%c-%%a-%%b)
:for /l %A in (1,1,100) do copy "C:\some folder\file.ext" "C:\some folder\file-%%A.ext"
set choice=
:: test to see if directory exists
if EXIST "../delivery_%mydate%.txt" (
goto overwrite
) else (
goto start
)
:overwrite
echo.
echo delivery note already exists - continue?
set /p choice='y / n ?'
if '%choice%'=='' ECHO "%choice%" is not valid please try again
if '%choice%'=='y' goto start
if '%choice%'=='n' goto end
echo.
:start
echo.
for /l %A in (1,1,100) do copy "C:\some folder\delivery_%mydate%.ext" "C:\some folder\delivery_%mydate%.ext"
echo Choose the following:
echo 1. Directories
echo 2. Files
echo 3. quit
echo.
set /p choice=
if '%choice%'=='1' goto directory
if '%choice%'=='2' goto file
if '%choice%'=='3' goto end
cls
ECHO "%choice%" is not valid please try again
goto start
:directory
dir /ad /on /b > ../delivery_%mydate%.txt
echo.
goto checksuccess
:file
dir /a-d /on /b > ../delivery_%mydate%.txt
echo.
goto checksuccess
:checksuccess
I need to add a line of code to this batch file I have created above. I need this code to save an existing file to a higher version without deleting the previous one. This will also need to be embedded into the code I created. For example it will start saving them like: filev001, filev002, etc.
1. Some general advice for writing batch files
A list of commands is output on executing in a command prompt window help. It is advisable to use in batch files for environment variables and labels not a string which is also a command. It is possible, but not advisable.
start is a command to start an application in a separate process. So it is better to use for example Begin instead of start as label.
choice is a command for a choice which is better for single character choices than using set /P. So it is better to use for example UserChoice instead of just choice as environment variable name.
It is better to use echo/ instead echo. to output an empty line. The reason is explained by DosTips forum topic ECHO. FAILS to give text or blank line - Instead use ECHO/.
Environment variable names and labels are easier to read on using CamelCase and can be more easily searched case-sensitive and if necessary replaced in a batch file than a name/label which can exist as word also in comments and in strings output with echo.
The answer on question Why is no string output with 'echo %var%' after using 'set var = text' on command line? explains in detail why the usage of the syntax set "Variable=string value" is recommended in batch files on assigning a string to an environment variable.
The directory separator on Windows is the backslash character \. The slash character / is the directory separator on Unix/Linux/Mac. On Windows / is used for options/parameters. The Windows kernel functions support also directory and file paths with / as directory separator by automatically correcting them to \ internally in path. But it is nevertheless recommended to use in a batch file \ in paths.
rem is the command for a comment in a batch file. :: is an invalid label and not really a comment. Lines with a label at begin are ignored for command execution. But a label cannot be used in a command block. For that reason it is recommended to use command rem because :: in a command block results often in unexpected behavior on execution of the batch file.
2. Get current date in a specific format
Let us look on the command line:
for /f "tokens=2-4 delims=/ " %%a in ('date /t') do (set mydate=%%c-%%a-%%b)
date /t is a command which for executes in a background command process with the command line cmd.exe /C date /t for capturing the output of this command process written to standard output handle STDOUT and process the captured output line by line.
Can this be optimized?
Yes, because on running in a command prompt window set /? and reading the output help from first to last page it can be read that there is the environment variable DATE which expands to current date. So there is no need to run the command date to get current date as string.
The command date with option /t outputs the current date in the format defined for the used user account in Windows Region and Language settings. In your case it looks like the region dependent date format is MM/dd/yyyy with the weekday abbreviation at beginning (with no comma) before the date. The date format on my computer is just dd.MM.yyyy without weekday. The environment variable DATE is in same region dependent format as output of command date /t.
So the region dependent date in format ddd, MM/dd/yyyy could be also modified to yyyy-MM-dd using the command line:
for /F "tokens=2-4 delims=/, " %%a in ("%DATE%") do set "MyDate=%%c-%%a-%%b"
It is also possible to use string substitution:
set "MyDate=%DATE:~-4%-%DATE:~-10,2%-%DATE:~-7,2%"
String substitution is also explained by help output on running set /? and read the answer on
What does %date:~-4,4%%date:~-10,2%%date:~-7,2%_%time:~0,2%%time:~3,2% mean?
But if yyyy-MM-dd is the wanted date format for current date independent on region settings of the used user account is advisable to use the command lines
for /F "tokens=2 delims==." %%I in ('%SystemRoot%\System32\wbem\wmic.exe OS GET LocalDateTime /VALUE') do set "MyDate=%%I"
set "MyDate=%MyDate:~0,4%-%MyDate:~4,2%-%MyDate:~6,2%"
This region independent solution is really much slower than the above command lines. It is explained in detail by the answer on Why does %date% produce a different result in batch file executed as scheduled task? But it has the big advantage of being region independent.
3. Prompting user for a single character choice
The usage of set /P variable=prompt is not recommended for a single character choice because
the user can just hit RETURN or ENTER without entering anything at all resulting in variable keeping its current value or still not being defined if not defined before set /P command line;
the user can make a typing mistake and presses for example Shift+2 instead of just 2 resulting (on German keyboard) to enter " as string which most batch files using set /P breaks because of a syntax error on next command line evaluating the user input;
the user can enter anything instead of one of the characters asked for including strings which on next command line results in deletion of files and folders.
The solution is using the command choice if that is possible (depends on Windows version). choice waits for the key press of a character specified in the command options and immediately continues after one of these keys is pressed. And choice exits with the index of the pressed character in list as specified in batch file. This exit code is assigned to ERRORLEVEL which can be evaluated next also within a command block without using delayed expansion or used directly in a single goto instruction.
4. Rewritten batch file
Here is the rewritten batch file:
#echo off
setlocal EnableExtensions DisableDelayedExpansion
rem set "Folder=C:\some folder"
set "Folder=F:\Temp\Test"
:Prepare
cls
rem Get current date region independent in format yyyy-MM-dd.
for /F "tokens=2 delims==." %%I in ('%SystemRoot%\System32\wbem\wmic.exe OS GET LocalDateTime /VALUE') do set "MyDate=%%I"
set "MyDate=%MyDate:~0,4%-%MyDate:~4,2%-%MyDate:~6,2%"
set "FileNumber=0"
for %%I in ("%Folder%\file-*.ext") do call :GetFileNumber "%%~nI"
goto IncrementNumber
rem Subroutine to find out highest file number without using delayed
rem environment variable expansion for number range 0 to 2147483647.
rem Numbers starting with 0 are interpreted as octal number in number
rem comparison which makes it necessary to remove leading 0 from the
rem number string get from file name starting with 5 characters.
:GetFileNumber
set "Number=%~1"
set "Number=%Number:~5%
:RemoveLeadingZero
if "%Number%" == "" goto :EOF
if "%Number:~0,1%" == "0" set "Number=%Number:~1%" & goto RemoveLeadingZero
if %Number% GTR %FileNumber% set "FileNumber=%Number%"
goto :EOF
rem Make sure the file number has at least 3 digits.
:IncrementNumber
set /A FileNumber+=1
if %FileNumber% GEQ 100 goto ExistDelivery
set "FileNumber=00%FileNumber%"
set "FileNumber=%FileNumber:~-3%"
rem Test to see if file exists already.
:ExistDelivery
if not exist "..\delivery_%MyDate%.txt" goto Begin
echo/
%SystemRoot%\System32\choice.exe /C YN /N /M "Delivery note already exists, continue (Y/N)? "
if errorlevel 2 goto :EOF
:Begin
set "FileName=file-%FileNumber%.ext"
copy "%Folder%\file.ext" "%Folder%\%FileName%" >nul
echo/
echo Choose the following:
echo/
echo 1. Directories
echo 2. Files
echo 3. Quit
echo/
%SystemRoot%\System32\choice.exe /C 123 /N /M "Your choice? "
if errorlevel 3 goto :EOF
if errorlevel 2 goto GetFileList
dir * /AD /ON /B >"..\delivery_%MyDate%.txt"
echo/
goto CheckSuccess
:GetFileList
dir * /A-D /ON /B >"..\delivery_%MyDate%.txt"
echo/
:CheckSuccess
rem More commands.
endlocal
It was not really clear for me what the entire batch code is for at all.
It would have been also easier to write the determination of highest number in a file name on knowing the possible number range like 001 to 100. So I wrote a general solution for 001, 002, ..., 099, 100, 101, ..., 1000, ..., 2147483647.
For understanding the used commands and how they work, open a command prompt window, execute there the following commands, and read entirely all help pages displayed for each command very carefully.
call /?
cls /?
copy /?
dir /?
echo /?
endlocal /?
for /?
goto /?
if /?
rem /?
set /?
setlocal /?
wmic /?
wmic os /?
wmic os get /?
wmic os get localdatetime /?
See also answer on Single line with multiple commands using Windows batch file for an explanation of & operator and read the Microsoft article about Using command redirection operators.
I am trying to read in a directory and get the filename from that directory.
I then want to save the filename as a variable and echo that filename out.
Here is the code I am using:
for /F %%a in ('dir C:\Users\username\Documents\Training\Pentaho\Outputs\BatchFileOutput\ *.csv') do set FileName=%%a
echo %FileName%
I am getting the following when command prompt runs:
"File not found
Directory"
Does anyone know how to resolve this or where I'm going wrong?
Thanks
Safer way of doing the same:
#echo off
setlocal
set "yourDir=C:\Users\username\Documents\Training\Pentaho\Outputs\BatchFileOutput\"
set "yourExt=*.csv"
pushd %yourDir%
for %%a in (%yourExt%) do echo %%a
popd
endlocal
Sets both: Your directory and the extension you are searching for, Changes the directory to the one previously setted possibly including a /drive change and then runs a loop over all files matching your extension and echo them out. To save only the last one you can use:
...do set fileName=%%a
echo %FileName%
Or to use them all within the loop you can use:
#echo off
Setlocal EnableDelayedExpansion
REM Other things done here
do (
REM Do stuff with %%a here
Set filename=%%a
echo !filename!
echo !filename:~0,6!
echo !filename:a=b!
)
If you just want to echo them, you can just go for echo %%a. If you want to do other things like string-substitution or substrings as described in the comments you need DelayedExpansion as shown above. There are a lot of questions on SO as well.
Note that you can get different "parts" of the path of your file. Have a look on this answer I always have a look on as well. Alternatively check the documentation for the for command typing for /? into the command-line.
I have set up a batch file to be default to open .txt files. In an earlier question I found out that %1 gives me the path of the file which was actually calling the batch file. The Problem is: if the file name contains white space, it gets interpreted as multiple parameters.
Example:
opening file "C:\Users\Desktop\space true.txt"
%1 gives:"C:\Users\Desktop\space" and then %2 gives: "true.txt"
How could I get just the full file path with the name and white space without trying to do a loop to attempt to get the full path by combining %1%2%3%4...
UPDATE-----------------------
Sorry there was a miss communication. The code below is working. The trick was to put "%*" instead of "%1"
here the code:
#echo on
set var= "%*"
c:
cd "C:\Users\MyText Editor"
start javaw -jar "MyTextEditor.jar"%var%
pause
I do the whole changing the path, because the file which I double click and the the the batch file are in different directories. I had to change it to this.
UPDATE 2 --------------------------
The solution which worked best for me was from this fine gentlemen dbenham.
#echo off
pushd "C:\Users\MyText Editor"
start javaw -jar "MyTextEditor.jar" %*
The only complain I have is, that there is a case, where %* does not return the path with quotes. So I am searching for a final solution. Something like this "%~*" But this doesn't work.
Thanks in advance
The following is not quite correct - I thought the file associations would put quotes around the file name like drag and drop does. But I was mistaken
This line is the source of your problem:
set var= "%*"
When files are dragged onto your batch script, or if a text file is double clicked, any file name(s) containing space will automatically be enclosed within quotes.
When you add your own additional quotes, it defeats the purpose of the quotes - the space is no longer quoted.
For example, a string like "name with space.txt" is treated as a single arg, but with added quotes, ""name with space.txt"" becomes three arguments.
There is no need for your var variable. You can use %* directly in your START command.
#echo on
pushd "C:\Users\MyText Editor"
start javaw -jar "MyTextEditor.jar" %*
pause
I'm not sure the above works properly if multiple files are passed. I suspect you may want the following:
#echo on
pushd "C:\Users\MyText Editor"
for %%F in (%*) do start javaw -jar "MyTextEditor.jar" %%F
pause
There is one potential problem. Windows has a bug in that file names containing & are not automatically quoted as they should. See "Droplet" batch script - filenames containing ampersands for more info.
EDIT - The following should work
OK, I did some tests and I believe your best bet is to modify the command associated with .txt files.
I tested association changes via the command line. This must be done via an elevated command prompt with admin rights. On my machine I go to the Start menu, click on "All Programs", click on "Accessories" folder, right click "Command Prompt", and select "Run as administrator", then click "Yes" to allow the program to make changes to the system.
The following command will show which file type needs to be modified
assoc .txt
On my machine it reports .txt=txtfile, so txtfile is what must be modified using FTYPE.
I believe the following should work for you:
ftype txtfile="C:\pathToYourScrpt\yourScript.bat" "%1"
Obviously you would need to fix the path to your batch script :-)
Once you have made the change, the filename will automatically be quoted every time your script is invoked via a file association.
Your batch script can then look like the following, and it should work no matter how it is invoked (excepting drag and drop with file name containing & but no space):
#echo off
pushd "C:\Users\MyText Editor"
for %%F in (%*) do start javaw -jar "MyTextEditor.jar" %%F
It seems to me you should be able to eliminate the batch script and configure FTYPE TXTFILE to open your java editor directly. I should think something like the following:
ftype txtfile="c:\pathToJava\javaw.exe" -jar "C:\Users\MyText Editor\MyTextEditor.jar" "%1"
When calling your batch file, you must enclose your parameter in quotes if there is spaces in it.
E.g.: Batch.cmd "C:\Users\Desktop\space true.txt"
Eric
%*
Here's a list of characters.
& seperates commands on a line.
&& executes this command only if previous command's errorlevel is 0.
|| (not used above) executes this command only if previous command's errorlevel is NOT 0
> output to a file
>> append output to a file
< input from a file
| output of one command into the input of another command
^ escapes any of the above, including itself, if needed to be passed to a program
" parameters with spaces must be enclosed in quotes
+ used with copy to concatinate files. E.G. copy file1+file2 newfile
, used with copy to indicate missing parameters. This updates the files modified date. E.G. copy /b file1,,
%variablename% a inbuilt or user set environmental variable
!variablename! a user set environmental variable expanded at execution time, turned with SelLocal EnableDelayedExpansion command
%<number> (%1) the nth command line parameter passed to a batch file. %0 is the batchfile's name.
%* (%*) the entire command line.
%<a letter> or %%<a letter> (%A or %%A) the variable in a for loop. Single % sign at command prompt and double % sign in a batch file.
Your problem is really that the syntax of your set command is wrong. In a batch
file, a set command looks like this:
set "var=%1"
That will give you your variable exactly as received. If the user quoted it,
then the variable's value will have quotes around it. To remove the quotes,
you'd put a ~ in front of the number:
set "var=%~1"
Notice how the quotes go around the entire assignment, and not just around the
value you are assigning. It is not set var="%1".
If you use set var= "%*", you haven't really fixed the fundamental problem
that your syntax is wrong. Plus, often you really do want %1 and not the
entire command line.
Here is an example script to test various quoting behaviors:
#echo off
set var="%*"
echo 1. var="%%*" --^> [%var%] (wrong)
set "var=%*"
echo 2. "var=%%*" --^> [%var%]
set "var=%1"
echo 3. "var=%%1" --^> [%var%]
set "var=%~1"
echo 4. "var=%%~1" --^> [%var%]
set "var=%~2"
echo 5. "var=%%~2" --^> [%var%]
set "var=%~3"
echo 6. "var=%%~3" --^> [%var%]
And here is the output of that script. Note how arg1, arg2, and arg3 are all
quoted:
C:\batch> all_args.cmd "arg 1" "this is arg 2" "arg 3"
1. var="%*" --> [""arg 1" "this is arg 2" "arg 3""] (wrong)
2. "var=%*" --> ["arg 1" "this is arg 2" "arg 3"]
3. "var=%1" --> ["arg 1"]
4. "var=%~1" --> [arg 1]
5. "var=%~2" --> [this is arg 2]
6. "var=%~3" --> [arg 3]
You can see that numbers 4, 5, and 6 correctly pulled out their quoted arguments
and saved the value into var. You typically want to save the argument without quotes, and then quote it when you use it in your script. In other words, your script should look like this:
#echo on
set "var=%~1"
c:
cd "C:\Users\MyText Editor"
start javaw -jar "MyTextEditor.jar" "%var%"
pause
#echo on
set var= "%*"
c:
cd "C:\Users\MyText Editor"
start javaw -jar "MyTextEditor.jar"%var%
pause
Becomes removing redundant commands
start "" javaw -jar "C:\Users\MyText Editor\MyTextEditor.jar" "%*"
pause
Echo is already on unless turned off by you.
We don't put things into variables for no reason, and it's already in %*. It just makes convoluted code and removes meaning from the name of the variable.
When programming (unlike typing) we don't change paths (and cd /d C:\Users\MyText Editor does drive and folder anyway).
We specify full path on the command line. This makes your meaning quite clear.
The main problem was there was no space between .jar and %var% and start command the first quotes on the line are assumed to the CMD's window title. I would code the path to javaw and not use start. Start is asking the Windows' graphical shell to start the file, not CMD.
Here's a batch file that starts vbs files. I don't specify path to cscript as it's a Windows' command.
It's complexity is to make use fairly idiot proof and easy for others.
#echo off
Rem Make sure filter.vbs exists
set filter=
set filterpath=
Call :FindFilter filter.vbs
Rem Add filter.bat to the path if not in there, setx fails if it's already there
setx path %~dp0;%path% 1>nul 2>nul
Rem Test for some command line parameters
If not "%1"=="" goto main
echo.
echo -------------------------------------------------------------------------------
echo.
echo Filter.bat
echo ==========
echo.
echo The Filter program is a vbs file for searching, replacing, extracting, and
echo trimming console output and text files.
echo.
echo Filter.bat makes Filter.vbs easily usable from the command line. It
echo controls unicode/ansi support and debugging.
echo.
echo Type Filter Help or Filter HTMLHelp for more information.
echo.
cscript //nologo "%filter%" menu
Goto :EOF
:Main
echo %date% %time% %~n0 %* >>"%~dp0\FilterHistory.txt"
rem echo Batch file ran
rem echo %*
Rem /ud Unicode and Debug
If %1==/ud FOR /F "tokens=1*" %%i IN ("%*") DO cscript "%filter%
" //nologo //u //x %%j&Goto :EOF
Rem /u Unicode
If %1==/u FOR /F "tokens=1*" %%i IN ("%*") DO cscript "%filter%
" //nologo //u %%j&Goto :EOF
Rem /d Ansi Debug
If %1==/d FOR /F "tokens=1*" %%i IN ("%*") DO cscript "%filter%
" //nologo //x %%j&Goto :EOF
Rem -ud Unicode and Debug
If %1==-ud FOR /F "tokens=1*" %%i IN ("%*") DO cscript "%filter%
" //nologo //u //x %%j&Goto :EOF
Rem /u Unicode
If %1==-u FOR /F "tokens=1*" %%i IN ("%*") DO cscript "%filter%
" //nologo //u %%j&Goto :EOF
Rem -d Ansi Debug
If %1==-d FOR /F "tokens=1*" %%i IN ("%*") DO cscript "%filter%
" //nologo //x %%j&Goto :EOF
Rem ANSI
cscript "%filter%
" //nologo %*&Goto :EOF
Goto :EOF
:FindFilter
If Exist "%~dpn0.vbs" set filter=%~dpn0.vbs&set filterpath=%~dp0&goto :EOF
echo find filter 1
If Not "%~dpnx$PATH:1" == "" set filter=%~dpnx1&set filterpath=%~dp1&goto :EOF
echo find filter 2
If Exist "%temp%\filter.vbs" set filter=%temp%\filter.vbs&set filterpath=%temp%&goto :EOF
copy "%~dpnx0" "%~dpn0.bak"
if not errorlevel 1 (
echo creating "%~dpn0.vbs"
goto :EOF
)
copy "%~dpnx0" "%temp%\filter.bak"
echo Error %errorlevel%
if not errorlevel 1 (
echo creating "%temp%\filter.bak"
Goto :EOF
)
Goto :EOF
I want to copy a file with set /p. Task: Write a file name with set /p and that will be copied in a directory that I want, but it doesn't work.
My current source:
#echo off
echo Enter YOur Pic Name With .jpg
set /p cop=
xcopy /s %systemroot%\%cop% %systemroot%\system32\oobe\info\backgrounds
cls
pause
For the SET /P command, the format works best like this:
set /p cop=Enter your Pic name with .jpg
I'd also suggest you add a couple of lines to check if the file is actually there:
#rem just check that the full path is what I expect
echo %systemroot%\%cop%
#rem and check if the file is there
dir %systemroot%\%cop%
(Delete these lines once your batch file is working).
Also, delete the cls line, until it's working. Then, once it's doing what you need, you can put it back in, if you want.
You might want to think about whether %systemroot% is the right place for these pictures, even temporarily. It's usually used for Windows OS code.
It is possible that %systemroot% path may have spaces, so file names must be enclosed in quotes:
#echo off
set /p "cop=Enter YOur Pic Name With .jpg: "
xcopy /s "%systemroot%\%cop%" "%systemroot%\system32\oobe\info\backgrounds"
cls
pause
try running as admin: http://windows.microsoft.com/en-us/windows7/how-do-i-run-an-application-once-with-a-full-administrator-access-token
also you may try the following (xcopy doesn't like the /s), I think you're trying to silence the output, just try with the >nul redirect:
#echo off
echo Enter YOur Pic Name With .jpg
set /p cop=
xcopy /y %systemroot%\%cop% %systemroot%\system32\oobe\info\backgrounds\* >nul
cls
pause