I am learning C Programming currently on VS Code. I run program a lot of time repeatedly which mess up terminal. Mostly I use cls before running program to clear previous output of terminal. My default terminal is PowerShell in VS Code. Is there any way to clean terminal before each run.
What I have tried after google search:
-I have tried adding cls to powershell profile but it does not work on every code run.
-Checking clear previous output in coderunner settings didn't work either.
The easiest way is to add cls to the beginning of your code, but that's not always best:
You can also set a keyboard shortcut for clearing the console (Used to be ctrl+k, but was removed)
You don't want to replace the existing behavior when running code, but a pretty simple one-button solution could be setting up a vs code macro to do Terminal: Clear, and also run your open file in the terminal.
I am using eclipse cdt oxygen with mingw64 7.2.0 on windows 10 to write programs in c. Whenever I write programs that only outputs like:
printf("x\n");
The output got printed into the console. However when I write programs that asks for inputs, like:
c = getchar();
rather than going to the console, eclipse instead opens a terminal. I believe that is where you will type the input. This doesn't usually bother me, however my eyes are destroyed, I am using a screen reader and this terminal is somewhat inaccessible. It is usable, but can be very hard to use sometimes (E.G. my screen reader JAWS does not speak what I'm typing).
Is there a way for eclipse cdt to put all inputs and outputs directly to the console?
Unfortunately in this case eclipse console is read only. Better once compile and build your code go to the folder where it created your exe file and run that exe in command prompt and test.
open command prompt window (type cmd)
cd C:\path_to_your_exe\
yourexe
This will also help you in case your program takes command line parameters.
I had to write code in C and run it for an assignment. Since this is the first time that I'm using C, I downloaded MinGW as a compiler and Code Blocks as an IDE. I had no problem compiling the code given by my professor but it never runs (this is a simulation for an M/M/1 queue). When I say it never runs, I mean that a command prompt like window pops up and nothing happens after that. Every time I close that window and try to compile the SAME program again, I get an error that says that permission to access the file has been denied.
I then deleted Code Blocks and tried running the program through command prompt but I have the same problem. I've now tried doing it using LCC-Win but nothing has changed. Another weird thing that happens when I run any program is that three instances of the .exe file of that particular program are in my processes under task manager. I then need to restart my computer to try compiling that same program.
I even tried running a simple Hello World program and I have the same problem!
I am currently using a Windows 7 32-bit system.
Any help would be greatly appreciated!
I am developing a C program that prints out a message. The problem with it is that when I run its .exe file, it does not run in fullscreen (until I press alt+enter to force it to full screen). I want the program to run in fullscreen itself when I run it. Is there any way I can do it?
Thanks in advance.
You could call SetConsoleDisplayMode() to force CONSOLE_FULLSCREEN_MODE. Beware that support for this has been disappearing. The last machine I owned that could still do this has been gathering dust for quite a while already. Along with the memory of the loud relay clicking sound, mixed with the high-pitched wail of the flyback transformer in the CRT.
I recently installed CodeBlocks with mingw32 on Windows 7 Ultimate 32bit in order to dust off my c skills, but this problem has me somewhat stumped.
I decided to fire off a short Fibonacci generator to make sure my setup was working, but I ran into a hurdle.
The program compiles, links and whatnot like a charm and I get a corresponding executable which runs as expected.
The problems occur if I try to compile again, then I get the following:
c:/codeblocks/mingw/bin/../lib/gcc/mingw32/4.4.1/../../../../mingw32/bin/ld.exe: cannot open output file bin\Debug\Fibonacci.exe: Permission denied
I can't even edit the permissions of the generated executable.
I've checked the usual suspects:
Executable is verily not running.
Path to executable is read/writable to mingw32 (otherwise it wouldn't be able to build in the first place)
I'm not running cygwin in any shape or form.
And now for the funny bit: Usually after a few minutes, any executables generated by mingw32 which are displaying this Access Denied behaviour will automatically vanish without any intervention from me.
I've googled this somewhat, but most of the other results were either vague or inapplicable.
I wonder whether there is some Windows 7 security setting playing havoc with my .exe's, but I'm not that knowledgeable about Win 7 as to know where to begin searching.
Any one have any ideas?
I had exactly the same problem right after switching off some (in my opinion unneccessary) Windows services. It turned out that when I switched ON again the "Application Experience" everything resumed working fine.
May be you simply have to turn on this service? To switch ON Application Experience:
Click the Windows start buttonn.
In the box labeled "Search programs and files" type services.msc and click the search button. A new window with title "Services" opens.
Right click on "Application Experience" line and select "Properties" from popup menu.
Change Startup type to "Automatic (delayed start)".
Restart computer.
Application Experiences should prevent the problem in the future.
Your program is still running. You have to kill it by closing the command line window.
If you press control alt delete, task manager, process`s (kill the ones that match your filename).
If you think the executable is locked by a process, try Process Explorer from SysInternals. In the File/handle, enter Fibonacci.exe and you should see who holds the file.
If it is not enough, you can use Process Monitor (from SysInternals, again) to follow the activity of all processes on your system on Fibonacci.exe.
With a little bit of analysis (call stacks), you'll may find out why the access to the file is denied and what make it disappear.
Problem Cause :
The process of the current program is still running without interuption.
(This is the reason why you haven't got this issue after a restart)
The fix is simple :
Go to cmd and type the command taskkill -im process_name.exe -f
Eg:
taskkill -im demo.exe -f
here,
demo - is my program name
The Best solution is go to console in eclipse IDE and click the red button to terminate the program.
You will see the your program is running and output can be seen there. :) !!
I had the same behaviour, and fixed it by running Code::Blocks as administrator.
Open task manager -> Processes -> Click on .exe (Fibonacci.exe) -> End Process
if it doesn't work
Close eclipse IDE (or whatever IDE you use) and repeat step 1.
I had a similar problem. Using a freeware utility called Unlocker (version 1.9.2), I found that my antivirus software (Panda free) had left a hanging lock on the executable file even though it didn't detect any threat. Unlocker was able to unlock it.
Got the same issue. Read this. Disabled the antivirus software (mcaffee). Et voila
Confirmed by the antivirus log:
Blocked by Access Protection rule d:\mingw64\x86_64-w64-mingw32\bin\ld.exe d:\workspace\cpp\bar\foo.exe User-defined Rules:ctx3 Action blocked : Create
It may be your Antivirus Software.
In my case Malwarebytes was holding a handle on my program's executable:
Using Process Explorer to close the handle, or just disabling antivirus for a bit work just fine.
i experienced a similar issue. Bitdefender automatically quarantined each exe-file i created by MinGW g++. Instead of the full exe-file i found a file with a weird extension 'qzquar'
testAutoPtr1.exe.48352.gzquar
When i opened quarantined items in Bitdefender i found my exe-file quarantined there.
I got this error when using the Atom editor and mingw (through a package called gpp-compiler) for C++. Closing the open console window fixed my issue.