How we can use scale factor of 1000 for example to not get 0 to a as we work with integers. Its on 32bit microcontroller.
Example:
uint32 a;
a = 211/555 * x;
Should we just multiply everything on right by 1000, and then divide final result with 1000?
You may apply the scale factor before doing the division.
In your example you are effectively doing (assuming that x=1000)
a = (211/555) * x;
which will turn out to be
a = 0*x;
If you change it around to
a =(x*211)/555;
you can force the multiplication first, creating a numerator larger than 555 which will allow a to be greater than 0.
You cannot then divide this result by 1000 though because it will still be less than 0 which cannot be stored in an integer data type.
You need to keep it in this form and always treat that number as having a 1000 multiplier (for example if the units were originally kilometers, the new number is in meters) or you will have to use a type which can handle numbers less than 1 (like a float or double).
Related
i'm trying to understand why in the following situation i don't get an overflow:
double x = 1.7976931348623157E+308; //this is the max value of double
x = x + 0.5;
When checking the value of x after adding 0.5 i still get the same result.
Anyone?
Generally if you want to add a value to a double x the added value should be within the precision range for it to change the value at all.
For a double you get a precision of ~16 digits. So, if the added value is less than (x/1E+16), then there will be no change in the result.
With a little trial and error, in your case, adding a value of 1E+292, to the given double, gives a result of +INF.
double x = 1.7976931348623157E+308; //this is the max value of double
x = x + 1E+292;
printf ("\nx = %lf",x);
Result
x = 1.#INF00
Consider the analogy with exponent notation.
Suppose you are allowed 4 significant digits, so the number 1234000.0 will be represented by 1.234e6.
Now try adding 0.5 which should be 1234000.5.
Even if the intermediate buffer is big enough to hold that significance, its representation within the proscribed limit is still 1.234e6.
But if the intermediate buffer can hold, say, only 7 digits, the aligned values to add are
1234000
0
-------
1234000
so the 0.5 loses its significance even before the addition is performed. In the case of double you can be quite sure the intermediate buffer cannot hold 308 digits equivalent.
in this equation
#define mod 1000000007
int n;
int num = ((1<<n)%mod)+2;
I have to left shift 1 by any value of n and then perform mod operation to contain the result within the range of int. But the 1<<n is not showing correct value for bigger values of n such as 1000 or 10000. How to do it ?
The maximum you can left-shift 1 by is CHAR_BIT * sizeof(int) - 2. Any larger amount causes undefined behaviour.
If you want to work with numbers like 210000 you are going to have to use a big integer library (or write your own) , there are no built-in data types that can handle that sort of number accurately.
Another option is to use a smarter algorithm for modular exponentiation.
I have a loop like this:
for(uint64_t i=0; i*i<n; i++) {
This requires doing a multiplication every iteration. If I could calculate the sqrt before the loop then I could avoid this.
unsigned cut = sqrt(n)
for(uint64_t i=0; i<cut; i++) {
In my case it's okay if the sqrt function rounds up to the next integer but it's not okay if it rounds down.
My question is: is the sqrt function accurate enough to do this for all cases?
Edit: Let me list some cases. If n is a perfect square so that n = y^2 my question would be - is cut=sqrt(n)>=y for all n? If cut=y-1 then there is a problem. E.g. if n = 120 and cut = 10 it's okay but if n=121 (11^2) and cut is still 10 then it won't work.
My first concern was the fractional part of float only has 23 bits and double 52 so they can't store all the digits of some 32-bit or 64-bit integers. However, I don't think this is a problem. Let's assume we want the sqrt of some number y but we can't store all the digits of y. If we let the fraction of y we can store be x we can write y = x + dx then we want to make sure that whatever dx we choose does not move us to the next integer.
sqrt(x+dx) < sqrt(x) + 1 //solve
dx < 2*sqrt(x) + 1
// e.g for x = 100 dx < 21
// sqrt(100+20) < sqrt(100) + 1
Float can store 23 bits so we let y = 2^23 + 2^9. This is more than sufficient since 2^9 < 2*sqrt(2^23) + 1. It's easy to show this for double as well with 64-bit integers. So although they can't store all the digits as long as the sqrt of what they can store is accurate then the sqrt(fraction) should be sufficient. Now let's look at what happens for integers close to INT_MAX and the sqrt:
unsigned xi = -1-1;
printf("%u %u\n", xi, (unsigned)(float)xi); //4294967294 4294967295
printf("%u %u\n", (unsigned)sqrt(xi), (unsigned)sqrtf(xi)); //65535 65536
Since float can't store all the digits of 2^31-2 and double can they get different results for the sqrt. But the float version of the sqrt is one integer larger. This is what I want. For 64-bit integers as long as the sqrt of the double always rounds up it's okay.
First, integer multiplication is really quite cheap. So long as you have more than a few cycles of work per loop iteration and one spare execute slot, it should be entirely hidden by reorder on most non-tiny processors.
If you did have a processor with dramatically slow integer multiply, a truly clever compiler might transform your loop to:
for (uint64_t i = 0, j = 0; j < cut; j += 2*i+1, i++)
replacing the multiply with an lea or a shift and two adds.
Those notes aside, let’s look at your question as stated. No, you can’t just use i < sqrt(n). Counter-example: n = 0x20000000000000. Assuming adherence to IEEE-754, you will have cut = 0x5a82799, and cut*cut is 0x1ffffff8eff971.
However, a basic floating-point error analysis shows that the error in computing sqrt(n) (before conversion to integer) is bounded by 3/4 of an ULP. So you can safely use:
uint32_t cut = sqrt(n) + 1;
and you’ll perform at most one extra loop iteration, which is probably acceptable. If you want to be totally precise, instead use:
uint32_t cut = sqrt(n);
cut += (uint64_t)cut*cut < n;
Edit: z boson clarifies that for his purposes, this only matters when n is an exact square (otherwise, getting a value of cut that is “too small by one” is acceptable). In that case, there is no need for the adjustment and on can safely just use:
uint32_t cut = sqrt(n);
Why is this true? It’s pretty simple to see, actually. Converting n to double introduces a perturbation:
double_n = n*(1 + e)
which satisfies |e| < 2^-53. The mathematical square root of this value can be expanded as follows:
square_root(double_n) = square_root(n)*square_root(1+e)
Now, since n is assumed to be a perfect square with at most 64 bits, square_root(n) is an exact integer with at most 32 bits, and is the mathematically precise value that we hope to compute. To analyze the square_root(1+e) term, use a taylor series about 1:
square_root(1+e) = 1 + e/2 + O(e^2)
= 1 + d with |d| <~ 2^-54
Thus, the mathematically exact value square_root(double_n) is less than half an ULP away from[1] the desired exact answer, and necessarily rounds to that value.
[1] I’m being fast and loose here in my abuse of relative error estimates, where the relative size of an ULP actually varies across a binade — I’m trying to give a bit of the flavor of the proof without getting too bogged down in details. This can all be made perfectly rigorous, it just gets to be a bit wordy for Stack Overflow.
All my answer is useless if you have access to IEEE 754 double precision floating point, since Stephen Canon demonstrated both
a simple way to avoid imul in loop
a simple way to compute the ceiling sqrt
Otherwise, if for some reason you have a non IEEE 754 compliant platform, or only single precision, you could get the integer part of square root with a simple Newton-Raphson loop. For example in Squeak Smalltalk we have this method in Integer:
sqrtFloor
"Return the integer part of the square root of self"
| guess delta |
guess := 1 bitShift: (self highBit + 1) // 2.
[
delta := (guess squared - self) // (guess + guess).
delta = 0 ] whileFalse: [
guess := guess - delta ].
^guess - 1
Where // is operator for quotient of integer division.
Final guard guess*guess <= self ifTrue: [^guess]. can be avoided if initial guess is fed in excess of exact solution as is the case here.
Initializing with approximate float sqrt was not an option because integers are arbitrarily large and might overflow
But here, you could seed the initial guess with floating point sqrt approximation, and my bet is that the exact solution will be found in very few loops. In C that would be:
uint32_t sqrtFloor(uint64_t n)
{
int64_t diff;
int64_t delta;
uint64_t guess=sqrt(n); /* implicit conversions here... */
while( (delta = (diff=guess*guess-n) / (guess+guess)) != 0 )
guess -= delta;
return guess-(diff>0);
}
That's a few integer multiplications and divisions, but outside the main loop.
What you are looking for is a way to calculate a rational upper bound of the square root of a natural number. Continued fraction is what you need see wikipedia.
For x>0, there is
.
To make the notation more compact, rewriting the above formula as
Truncate the continued fraction by removing the tail term (x-1)/2's at each recursion depth, one gets a sequence of approximations of sqrt(x) as below:
Upper bounds appear at lines with odd line numbers, and gets tighter. When distance between an upper bound and its neighboring lower bound is less than 1, that approximation is what you need. Using that value as the value of cut, here cut must be a float number, solves the problem.
For very large number, rational number should be used, so no precision is lost during conversion between integer and floating point number.
I'm working with a microchip that doesn't have room for floating point precision, however. I need to account for fractional values during some equations. So far I've had good luck using the old *100 -> /100 method like so:
increment = (short int)(((value1 - value2)*100 / totalSteps));
// later in the code I loop through the number of totolSteps
// adding back the increment to arrive at the total I want at the precise time
// time I need it.
newValue = oldValue + (increment / 100);
This works great for values from 0-255 divided by a totalSteps of up to 300. After 300, the fractional values to the right of the decimal place, become important, because they add up over time of course.
I'm curious if anyone has a better way to save decimal accuracy within an integer paradigm? I tried using *1000 /1000, but that didn't work at all.
Thank you in advance.
Fractions with integers is called fixed point math.
Try Googling "fixed point".
Fixed point tips and tricks are out of the scope of SO answer...
Example: 5 tap FIR filter
// C is the filter coefficients using 2.8 fixed precision.
// 2 MSB (of 10) is for integer part and 8 LSB (of 10) is the fraction part.
// Actual fraction precision here is 1/256.
int FIR_5(int* in, // input samples
int inPrec, // sample fraction precision
int* c, // filter coefficients
int cPrec) // coefficients fraction precision
{
const int coefHalf = (cPrec > 0) ? 1 << (cPrec - 1) : 0; // value of 0.5 using cPrec
int sum = 0;
for ( int i = 0; i < 5; ++i )
{
sum += in[i] * c[i];
}
// sum's precision is X.N. where N = inPrec + cPrec;
// return to original precision (inPrec)
sum = (sum + coefHalf) >> cPrec; // adding coefHalf for rounding
return sum;
}
int main()
{
const int filterPrec = 8;
int C[5] = { 8, 16, 208, 16, 8 }; // 1.0 == 256 in 2.8 fixed point. Filter value are 8/256, 16/256, 208/256, etc.
int W[5] = { 10, 203, 40, 50, 72}; // A sampling window (example)
int res = FIR_5(W, 0, C, filterPrec);
return 0;
}
Notes:
In the above example:
the samples are integers (no fraction)
the coefs have fractions of 8 bit.
8 bit fractions mean that each change of 1 is treated as 1/256. 1 << 8 == 256.
Useful notation is Y.Xu or Y.Xs. where Y is how many bits are allocated for the integer part and X for he fraction. u/s denote signed/unsigned.
when multiplying 2 fixed point numbers, their precision (size of fraction bits) are added to each other.
Example A is 0.8u, B is 0.2U. C=A*B. C is 0.10u
when dividing, use a shift operation to lower the result precision. Amount of shifting is up to you. Before lowering precision it's better to add a half to lower the error.
Example: A=129 in 0.8u which is a little over 0.5 (129/256). We want the integer part so we right shift it by 8. Before that we want to add a half which is 128 (1<<7). So A = (A + 128) >> 8 --> 1.
Without adding a half you'll get a larger error in the final result.
Don't use this approach.
New paradigm: Do not accumulate using FP math or fixed point math. Do your accumulation and other equations with integer math. Anytime you need to get some scaled value, divide by your scale factor (100), but do the "add up" part with the raw, unscaled values.
Here's a quick attempt at a precise rational (Bresenham-esque) version of the interpolation if you truly cannot afford to directly interpolate at each step.
div_t frac_step = div(target - source, num_steps);
if(frac_step.rem < 0) {
// Annoying special case to deal with rounding towards zero.
// Alternatively check for the error term slipping to < -num_steps as well
frac_step.rem = -frac_step.rem;
--frac_step.quot;
}
unsigned int error = 0;
do {
// Add the integer term plus an accumulated fraction
error += frac_step.rem;
if(error >= num_steps) {
// Time to carry
error -= num_steps;
++source;
}
source += frac_step.quot;
} while(--num_steps);
A major drawback compared to the fixed-point solution is that the fractional term gets rounded off between iterations if you are using the function to continually walk towards a moving target at differing step lengths.
Oh, and for the record your original code does not seem to be properly accumulating the fractions when stepping, e.g. a 1/100 increment will always be truncated to 0 in the addition no matter how many times the step is taken. Instead you really want to add the increment to a higher-precision fixed-point accumulator and then divide it by 100 (or preferably right shift to divide by a power-of-two) each iteration in order to compute the integer "position".
Do take care with the different integer types and ranges required in your calculations. A multiplication by 1000 will overflow a 16-bit integer unless one term is a long. Go through you calculations and keep track of input ranges and the headroom at each step, then select your integer types to match.
Maybe you can simulate floating point behaviour by saving
it using the IEEE 754 specification
So you save mantisse, exponent, and sign as unsigned int values.
For calculation you use then bitwise addition of mantisse and exponent and so on.
Multiplication and Division you can replace by bitwise addition operations.
I think it is a lot of programming staff to emulate that but it should work.
Your choice of type is the problem: short int is likely to be 16 bits wide. That's why large multipliers don't work - you're limited to +/-32767. Use a 32 bit long int, assuming that your compiler supports it. What chip is it, by the way, and what compiler?
The factorial function could return a very large number as a result.
How could I work out the size of the data which must return as a result of the factorial? Is there a function which can give me the size of the data quickly based upon the number n for which we are computing the factorial?
For example, factorial (5) = 5 * 4 * 3 * 2 = 120
The number 120 will be 120 = 0b1111000 where 0b indicates this is a binary number. At least, I need 7 bits to represent the result and probability I would like to fit that into 8 bits to be a byte.
you need to calculate log2(factorial(N)), rounded up to the next higher number to get the number of bits you need to represent the result. if you're not sure if your can calculate or represent the factorial result with your current setup, you may try to calculate the sum of log2(i) for all i in the range from 2 to N inclusive (including 2 and N, that is).
as a sample, let's calculate the number of bits for factorial(5):
log2(120) = 6.906, rounded up become 7 (bits)
otheriwise,
log2(2) + log2(3) + log2(4) + log2(5) = 6.906, which gives same result