I have configured my SPA application in Auth0 and works fine. Now I have tried to connect my azure AD to Auth0 with PKCE flow, so user logs in with outlook account. This also works fine.
I am having few questions on azure AD with Auth0
1) Where do we get authorization code? from auth0 or azure AD?
2) Submitting authorization code for id_token and access_token
a) are we submitting authorization code to auth0 or azure AD?
b) do we get access_token, id_token from auth0 or azure AD?
Please bare me if I my question seems very basic.
Your app talks with Auth0.
Auth0 will give you the tokens.
In this setup, Auth0 is your app's identity provider.
Auth0 then uses AAD as its identity provider.
But from your app's perspective, the user authenticates with Auth0.
Related
Is there anyway to integrate Azure (multi-tenant and personal account) Login in Amazon Cognito?
The application's manifest is
"signInAudience": "AzureADandPersonalMicrosoftAccount"
In Amazon Cognito console, I tried to add OIDC Provider, issuer is https://login.microsoftonline.com/{tenant_id}/v2.0. It works with my tenant users. But it doesn't work for other tenant users and personal accounts. I see it's because issuer endpoint has my tenant_id.
I tried to use https://login.microsoftonline.com/common/v2.0, the Azure AD login works for multi-tenant and personal accounts, but cognito doesn't get token.
OAuth - Error handling auth response. Error:
Bad+id_token+issuer+https%3A%2F%2Flogin.microsoftonline.com%2F58a488e4-8111-40be-a23b-f9531d464895%2Fv2.0
Hope to hear from you soon.
We have integrated keycloak with Azure Active Directory and integrated it with a few applications.
We have a few applications that are directly integrated with Azure Active Directory. Is there an approach I can follow to make a person logged in to one application to be signed in all the other applications irrespective of the authentication provider used (keycloak or Azure AD)?
Normally I'll be logged into all applications integrated with keycloak if I signin into one application integrated with keycloak and vice-versa with Azure AD.
Your requirement can be fulfilled with the app service feature by leveraging the token store and authorization behavior of the configured authentication providers for the apps configured. But only tokens received from keycloak can be forwarded to Azure AD for authentication purposes and further sign in respectively to all apps registered with Azure AD. The reverse is not possible as keycloak doesn’t has the ability to forward the sign in token request received for the application configured back to Azure AD for authorization.
You will have to enter the REST API code for signing in and out of a session accordingly by incorporating the below likewise code in your environment.
Log in with the Microsoft Identity Platform
Log in with Facebook
Log in with Google
Log in with Twitter
Log in with Apple
Please find the below documentation for an approach on forwarding the authentication tokens from Keycloak to Azure AD for access authorization: -
https://learn.microsoft.com/en-us/azure/app-service/overview-authentication-authorization
https://learn.microsoft.com/en-us/azure/app-service/configure-authentication-customize-sign-in-out
Thanking you,
I'm trying to integrate Azure AD B2C with my App Service using the Authentication / Authorization menu in the portal (also called EasyAuth).
This is what I did:
Registered the application in Azure B2C
Recorded the App ID
Defined user flows (just Sign In)
Set up identity provider (Azure AD)
Tested the user flow, with Redirect URI pointing to jwt.ms, to see the result - works fine
Enabled Authentication / Authorization in the App Service in the Portal
Configured Azure AD authentication with the App ID from above and the link to the endpoint metadata
But now, when I access the App Service, I'm redirected to a "Logging in..." page which immediately goes to the jwt.ms page, with no JWT data, no login page, and no opportunity to enter my credentials.
Just an empty jwt page.
I couldn't find anything in the docs that can explain this.
What am I missing?
Azure B2B gives simple steps for direct federation with google and facebook.Though, i don't see any documentation to establish direct federation with Auth0 or Okta. I tried myself with Auth0 at the time or invitation my user succesfully login with auth0 account but after redirection to invitation.microsoft.com getting redemtion failure.
Can someone give me steps to setup Auth0 as IDP and then configure that with Azure AD direct federation.
https://auth0.com/docs/protocols/saml-configuration-options/configure-auth0-as-saml-identity-provider
i have already setup everything as mentioned in above document but still not able to redeem invitation after login.
Any help would be highly appreciated!!!
Azure AD B2B can be configured to federate with identity providers that use the WS-Fed or SAML. There is no specific Document for direct federation either from OKTA or Azure. From Azure end Direct federation is only allowed for policies where the authentication URL’s domain matches the target domain, or where the authentication URL is one of these allowed identity providers as per this document. I recommend you to open a support case with Auth0 since it involves multiple parties.
Sign-in with Microsoft identity provider fails, works with others
I have an Azure AD B2C tenant with a SingIn and SignUp policy that I hope to use
for user management with an Angular2 SPA.
The policy is configured for three identity providers:
Google
Microsoft
Email Signup
When I use the Run Now button in the Azure portal to run this policy, I get the default Sign In dialog, and I can sign in with either Google or Email signin. (By that I mean I get re-directed to my app's redirect page as I expect.) However, when I try to sign in using the Microsoft
provider, I end up at an error page with the following address:
https://login.live.com/err.srf?lc=1033#error=invalid_request&error_description=The+provided+value+for+the+input+parameter+'redirect_uri'+is+not+valid.+The+expected+value+is+'https://login.live.com/oauth20_desktop.srf'+or+a+URL+which+matches+the+redirect+URI+registered+for+this+client+application.&state=StateProperties%3deyJTSUQiOiJ4LW1zLWNwaW0tcmM6NDcyMmQyNjItOTk1Yi00YTJlLWFmNWUtODkwNDgyODlhMzM0IiwiVElEIjoiM2Y2ZDVmNjAtMDdiNC00ZDA3LWEyZDItN2U3YWQwOWRhOGQ5In0
I see that the problem is related to an invalid redirect_uri. But I thought the redirect_uri was an application-level setting shared by ALL identity provders that I have configured. Why does my redirect_uri setting work for Google and Email signup, but not for Microsoft?
You have to configure your Microsoft application with the right redirect URL.
As stated in the documentation:
Enter https://login.microsoftonline.com/te/{tenant}/oauth2/authresp in the Redirect URIs field. Replace {tenant} with your tenant's name (for example, contosob2c.onmicrosoft.com).
Why you have to do this: (courtesy of Chris Padgett)
The redirect URI that is configured in the Azure AD B2C Portal represents the reply address for your client application. This is so Azure AD B2C can return an ID token to your client application. The redirect URI that is configured in the Application Registration Portal represents the reply address for your Azure AD B2C tenant. This is so the Microsoft Account identity provider can return a security token to your Azure AD B2C tenant.
So, your app is federating authentication to Azure AD B2C.
B2C then further federates to the Microsoft Account identity provider.
So when a user a logs in with a Microsoft account, they are sent back to B2C with a token, which B2C validates.
If all is okay, they are signed in to B2C, and sent back to your app.
So you see that from the point of view of the MSA identity provider, B2C is the client.
So the redirect URL there must point to B2C.
As the document stated, you should Enter https://login.microsoftonline.com/te/{tenant}/oauth2/authresp in the Redirect URIs field.
But I thought the redirect_uri was an application-level setting shared
by ALL identity provders that I have configured. Why does my
redirect_uri setting work for Google and Email signup, but not for
Microsoft?
You're right, the redirect_uri is an applicaiton-level sttings. It should be same in all IDPs redirect URIs. But this Redirec URI is set by Azure. NOT your applicaiton. It means that your can use other IDPs to login to your app with AAD B2C, NOT login to your applicaiton directly. So, the redirect_uris must be https://login.microsoftonline.com/te/{tenant}/oauth2/authresp, not the redirect_uri in your application itself.
URI doesn't equal URL. The redirect URI is just a unique identifier to which Azure AD will redirect the user-agent in an OAuth 2.0 request. It's not redirect URL, Azure AD authentication endpoint https://login.microsoftonline.com/ use redirect URIs to check where it should be responsed. Aslo, it can be same as the URL as the endpoint. Here should be the same I guess.
Summary, you need use the unique redirect URI https://login.microsoftonline.com/te/{tenant}/oauth2/authrespfor all IDPs , not just Microsoft account.
Hope this helps!