$ binwalk -e linux_image.img
DECIMAL HEXADECIMAL DESCRIPTION
--------------------------------------------------------------------------------
0 0x0 Android bootimg, kernel size: 6897653 bytes, kernel addr: 0x81C08000, ramdisk size: 5959520 bytes, ramdisk addr: 0x81C08000, product name: ""
2048 0x800 Linux kernel ARM boot executable zImage (little-endian)
18479 0x482F gzip compressed data, maximum compression, from Unix, last modified: 1970-01-01 00:00:00 (null date)
6761720 0x672CF8 device tree image (dtb)
6883304 0x6907E8 Unix path: /dev/block/platform/soc/7824900.sdhci/by-name/vendor
6899712 0x694800 gzip compressed data, maximum compression, has original file name: "rootfs.cpio", from Unix, last modified: 2019-04-06 00:42:26
9706949 0x941DC5 MySQL ISAM compressed data file Version 11
$ dd if=linux_image.img of=vmlinuz bs=1 skip=2048 count=6897653
$ file vmlinuz
vmlinuz: Linux kernel ARM boot executable zImage (little-endian)
$ dd if=vmlinuz bs=1 skip=$(LC_ALL=C grep -a -b -o $'\x1f\x8b\x08\x00\x00\x00\x00\x00' vmlinuz-3.18.66-perf | head -n 1 | cut -d ':' -f 1) | zcat | grep -a 'Linux version'
Linux version 3.18.66 (build#test) (gcc version 4.9.3 (GCC) ) #1 SMP PREEMPT Fri Apr 1 13:16:33 PDT 2018
Running 'qemu-system-arm.exe -machine vexpress-a9 -cpu cortex-a7 -smp 4 -kernel vmlinuz' blank screen
If you pull a random Arm Linux kernel (including Android) from somewhere and try to run it on anything other than the hardware that it is intended to boot on, the expected result is that it crashes very early in bootup without being able to output anything to screen or serial port, ie you get a black screen and nothing happens. The most likely situation here is that your image is fine and not corrupt, it's just not built to run on the vexpress-a9 board you're running it on.
In the unlikely event that this really is a kernel built for the vexpress-a9, the next problem you have is that you haven't passed QEMU a device tree blob via the -dtb option. Modern Linux kernels don't hardcode all the information about the boards they can run on, but instead expect the bootloader (which is QEMU in this case) to pass them a data file which provides information about where all the devices are for the board. If you don't do that, then the result is the same as above: kernel crashes very early in bootup without being able to output any information, so black screen.
Related
I'm debuging NVME code with QEMU , QEMU return an err message:No 'PCI' bus found for device 'nvme'.
However,I checked device info,it shows PCI is surportted.
root#linux:/home/#qemu-system-arm -machine vexpress-a9 -device help
Storage devices:
name "am53c974", bus PCI, desc "AMD Am53c974 PCscsi-PCI SCSI adapter"
name "nvme", bus PCI, desc "Non-Volatile Memory Express"
name "nvme-ns", bus nvme-bus, desc "Virtual NVMe namespace"
name "nvme-subsys", desc "Virtual NVMe subsystem"
Could anybody give me some tips?
QEMU command:
root#linux:~/run-kernel/$ qemu-system-arm -nographic -M vexpress-a9 -m 1024M -kernel arch/arm/boot/zImage -append "rdinit=/linuxrc console=ttyAMA0 loglevel=8" -dtb arch/arm/boot/dts/vexpress-v2p-ca9.dtb -device nvme,drive=nvme0,serial=deadbeaf1,num_queues=8 -drive file=disk.qcow2,if=none,id=nvme0
output:
WARNING: Image format was not specified for 'disk.qcow2' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
qemu-system-arm: -device nvme,drive=nvme0,serial=deadbeaf1,num_queues=8: No 'PCI' bus found for device 'nvme'
QEMU version:
root#linux:/home/# qemu-system-arm -version
QEMU emulator version 6.0.94
Copyright (c) 2003-2021 Fabrice Bellard and the QEMU Project developers
You're trying to use a PCI device (nvme) on a machine type with no PCI bus (vexpress-a9). This doesn't work, in the same way that trying to plug a real hardware PCI card into a machine with no PCI slots is impossible.
You may be being confused by the '-device help' output: that output lists all devices compiled into that QEMU binary, and does not filter it based on any additional '-machine' option you pass at the same time. So it will always show you everything.
I was looking into the IO path of the Linux kernel, and towards the bottom in the function scsi_dispatch_cmd(), the driver code is invoked
rtn = host->hostt->queuecommand(host, cmd);
So, for my block device like /dev/sda/, is there a way to find out which hostt or scsi_host_template it is using. I want to check which function queuecommand is pointing to..
Just as a sketch of reflection on this subject.
In my machine for USB drive I can see this:
$ ls -l /dev/sdg
brw-rw---- 1 root disk 8, 96 Apr 27 01:21 /dev/sdg
$ ll /sys/dev/block/8\:96/device/drive
lrwxrwxrwx 1 root root 0 Apr 27 01:32 /sys/dev/block/8:96/device/driver -> ../../../../../../../../../bus/scsi/drivers/sd
So normally such block devices are handled through the regular Linux scsi disk driver. Which is related with e.g. usb handling:
$ lsmod | grep sd
sd_mod 49152 13
scsi_mod 225280 5 sd_mod,usb_storage,libata,uas,sg
In this particular case we can see the relation between queuecommand and mentioned drive:
$ grep queuecommand /proc/kallsyms
ffffffffc052be60 t uas_queuecommand [uas]
ffffffffc0582ad0 t queuecommand [usb_storage]
Now, being in Linux source dir:
$ grep -rnI '\.queuecommand =' | grep usb
drivers/usb/storage/uas.c:846: .queuecommand = uas_queuecommand,
drivers/usb/storage/scsiglue.c:609: .queuecommand = queuecommand,
Hope this will help you.
I bought an IP camera on which is installed proprietary software (no HTTP server).
This prevents me to integrate it into my home network.
I want to replace the software (ELF closed source) by the motion package I already use and add some features.
I have no particular system competence and it's been over a week since I travel the net to learn but I can not get out.
I have access to the U-boot console (USB-TTL adapter) and telnet (root).
The webcam has a SD card reader that I could use if I need space.
I started by making a backup of the three partitions (with dd).
I unzipped the file mtdblock2 (binwalk -e). Which generates a classical Linux tree with links to Busybox, some binary system and proprietary software.
I tried to unzip mtdblock1 which generates zImage.
The decompression zImage generates two directories and one file (console).
Yet I need the kernel modules that are in it. What to do?
I also want to get the kernel compilation settings, is this possible?
I unpacked the firmware available on the manufacturer's website.
It contains only updating the ELF, one .so file and some Bash scripts.
At first I thought the three partitions directly migrate to Qemu.
But if I understand this is not possible because the memory addresses are hard-coded into the kernel.
I understand good?
So I think I have one solution: build a new kernel and rebuild a rootfs from scratch.
Is this only solution?
I started playing with Buildroot but I can not find the configuration file for board based on Hisilicon Hi3518.
I looked bad or is it useless?
For my first test I used board/qemu/arm-versatile. This is the right choice?
This will not prevent me from migrating to the physical machine?
For testing, if I managed to rebuild a kernel and rootfs I would install these partitions on the SD not to break anything.
For this, it is "sufficient" to modify kernel parameters (in bootargs variable) is that right?
So I don't need to rebuild a U-boat partition for my device?
In short, you guessed I ask myself a lot of questions (yet others but "one" thing at a time).
I need advice about whether I take the right road.
Please, if I am talking nonsense feel free to correct me.
If you have ideas or subjects of reflection I'm interested.
# cat /proc/cpuinfo
Processor : ARM926EJ-S rev 5 (v5l)
BogoMIPS : 218.72
Features : swp half thumb fastmult edsp java
CPU implementer : 0x41
CPU architecture: 5TEJ
CPU variant : 0x0
CPU part : 0x926
CPU revision : 5
Hardware : hi3518
Revision : 0000
Serial : 0000000000000000
# cat /proc/mtd
dev: size erasesize name
mtd0: 00100000 00010000 "boot"
mtd1: 00300000 00010000 "kernel"
mtd2: 00c00000 00010000 "rootfs"
# binwalk mtdblock0
DECIMAL HEXADECIMAL DESCRIPTION
--------------------------------------------------------------------------------
122044 0x1DCBC CRC32 polynomial table, little endian
# binwalk mtdblock1
DECIMAL HEXADECIMAL DESCRIPTION
--------------------------------------------------------------------------------
0 0x0 uImage header, header size: 64 bytes, header CRC: 0x853F419E, created: 2014-07-22 02:45:04, image size: 2890840 bytes, Data Address: 0x80008000, Entry Point: 0x80008000, data CRC: 0xB24E77CA, OS: Linux, CPU: ARM, image type: OS Kernel Image, compression type: none, image name: "Linux-3.0.8"
22608 0x5850 gzip compressed data, maximum compression, from Unix, NULL date:
# binwalk zImage
DECIMAL HEXADECIMAL DESCRIPTION
--------------------------------------------------------------------------------
113732 0x1BC44 ASCII cpio archive (SVR4 with no CRC), file name: "dev", file name length: "0x00000004", file size: "0x00000000"
113848 0x1BCB8 ASCII cpio archive (SVR4 with no CRC), file name: "dev/console", file name length: "0x0000000C", file size: "0x00000000"
113972 0x1BD34 ASCII cpio archive (SVR4 with no CRC), file name: "root", file name length: "0x00000005", file size: "0x00000000"
114088 0x1BDA8 ASCII cpio archive (SVR4 with no CRC), file name: "TRAILER!!!", file name length: "0x0000000B", file size: "0x00000000"
1903753 0x1D0C89 Certificate in DER format (x509 v3), header length: 4, sequence length: 1284
4188800 0x3FEA80 Linux kernel version "3.0.8 (cwen#ubuntu) (gcc version 4.4.1 (Hisilicon_v100(gcc4.4-290+uclibc_0.9.32.1+eabi+linuxpthread)) ) #1 Tue Jul 22 10:45:00 H"
4403540 0x433154 CRC32 polynomial table, little endian
5053435 0x4D1BFB Unix path: /mtd/devices/hisfc350/hisfc350_spi_gd25qxxx.c
5054731 0x4D210B Unix path: /mtd/devices/hisfc350/hisfc350.c
5058939 0x4D317B Unix path: /net/wireless/rt2x00/rt2x00dev.c
5059323 0x4D32FB Unix path: /net/wireless/rt2x00/rt2x00config.c
5060683 0x4D384B Unix path: /net/wireless/rt2x00/rt2x00usb.c
5060851 0x4D38F3 Unix path: /net/wireless/rt2x00/rt2x00.h
5061171 0x4D3A33 Unix path: /net/wireless/rt2x00/rt73usb.c
5081107 0x4D8813 Unix path: /S70/S75/505V/F505/F707/F717/P8
5102399 0x4DDB3F Unix path: /mmc/host/himciv100/himci.c
5141264 0x4E7310 Neighborly text, "NeighborSolicits/ipv6/inet6_hashtables.c"
5141284 0x4E7324 Neighborly text, "NeighborAdvertisementses.c"
# binwalk mtdblock2
DECIMAL HEXADECIMAL DESCRIPTION
--------------------------------------------------------------------------------
0 0x0 JFFS2 filesystem, little endian
722980 0xB0824 JFFS2 filesystem, little endian
732282 0xB2C7A Zlib compressed data, compressed
737031 0xB3F07 Zlib compressed data, compressed
738287 0xB43EF Zlib compressed data, compressed
.... most other lines in the same genre
IP Camera QQZM N5063
http://www.zmvideo.com/product/detail.php?id=60
Firmware
http://bbs.zmmcu.com/forum.php?mod=attachment&aid=MzU2fDBiY2M4NDdjfDE0MTkxMTEzODl8MzQ4fDIwMzc%3D
First of all, you do not want to replace U-Boot as this may render your device unbootable. On the U-Boot console, check if you can boot from the SD card mmc rescan 0; fatload mmc 0 ${loadaddr} uImage or from the network dhcp ${loadaddr} ${serverip}:uImage. You'll need to look for documentation for these commands to get more help.
But perhaps you don't even need to replace the kernel. You already know it's a 3.0.8 kernel, so you can build a userspace for this kernel version. And any proprietary modules that are used by it can be lifted from the jffs2 filesystem. On your telnet session, do lsmod to find out which modules are loaded. You can mount an SD card and copy them to it. The modules are located in /lib/modules/3.0.8.
So you probably don't even need to build a kernel in buildroot, only the rootfs. First, check in the telnet session which filesystems are supported: cat /proc/filesystems. Then choose the appropriate filesystem in the buildroot configuration. For the target architecture, choose arm926t. And select the 3.0 kernel headers in the toolchain configuration, or choose the Arago ARMv5 2011.09 external toolchain (it has old kernel headers).
As remarked by artless noise, you don't need to test it in qemu, since the SD card is safe.
Hope it's OK to jot this down, even if I cannot accept answer immediately (and hope it's OK for SO - as there is a C patch below):
It seems I screwed up the hard disk on my desktop PC ({DRDY err}). So I wanted to run a bootable media to run fsck, but the CD on this desktop is broken, so I can only use USB flash. I have a couple of USB thumbdrives with Ubuntu and Suse - these start booting on the desktop; but during boot, udev tries to detect hard drives, and since the hard disk is screwed, it just loops there, and the respective OS never finishes booting.
So I tried to download SystemRescueCd; I have this USB thumbdrive, on which I tried to install SystemRescueCD:
# lsusb with sudo, to retrieve all info
$ sudo lsusb -v -d 058f:6387 | grep -i 'id\|iManufacturer\|iProduct\|iSerial\|bInterface'
Bus 001 Device 043: ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive
idVendor 0x058f Alcor Micro Corp.
idProduct 0x6387 Transcend JetFlash Flash Drive
iManufacturer 1 takeMS
iProduct 2 Mem-drive Mini
iSerial 3 C5E7F0CC
bInterfaceNumber 0
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
# search by serial:
$ find /dev/disk/by-id/ -name '*C5E7F0CC*'
/dev/disk/by-id/usb-takeMS_Mem-drive_Mini_C5E7F0CC-0:0-part1
/dev/disk/by-id/usb-takeMS_Mem-drive_Mini_C5E7F0CC-0:0
# list and get device node
$ ls -la /dev/disk/by-id/usb-takeMS_Mem-drive_Mini_C5E7F0CC-0:0
lrwxrwxrwx 1 root root 9 2013-03-25 20:37 /dev/disk/by-id/usb-takeMS_Mem-drive_Mini_C5E7F0CC-0:0 -> ../../sdc
$ ls -la /dev/disk/by-id/usb-takeMS_Mem-drive_Mini_C5E7F0CC-0\:0-part1
lrwxrwxrwx 1 root root 10 2013-03-25 20:37 /dev/disk/by-id/usb-takeMS_Mem-drive_Mini_C5E7F0CC-0:0-part1 -> ../../sdc1
# it is /dev/sdc - list disk info
$ sudo fdisk -l /dev/sdc
Disk /dev/sdc: 2108 MB, 2108686336 bytes
94 heads, 29 sectors/track, 1510 cylinders
Units = cylinders of 2726 * 512 = 1395712 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0003e405
Device Boot Start End Blocks Id System
/dev/sdc1 * 1 1511 2059263+ c W95 FAT32 (LBA)
I tried to use my Ubuntu 11.04 Natty netbook to image the thumbdrive - and I used both
the recommended usb_inst.sh installer; and
I tried to use unetbootin (via sudo apt-get install unetbootin);
in both of these cases, when I try to boot the USB thumbdrive on the desktop, the boot procedure fails with:
SYSLINUX 4.02 debian-20101016 CHS Copyright (C) 1993-2010 H. Peter Anvin et al
ERROR: No configuration file found
No DEFAULT or UI configuration directive found!
boot:
.... with prompt at boot. (In fact, unetbootin fails at "Verifying DMI Pool Data", before entering syslinux - probably because it is much older than the .iso I'm trying to image).
First I checked the md5 as mentioned in No Default or UI Configuration Found!
$ md5sum ./systemrescuecd-x86-3.5.0.iso
48552b9e905872bd5061eb112b73ea20 ./systemrescuecd-x86-3.5.0.iso
... but it seems OK, as per Sysresccd-versions.
Then I tried to reformat the drive to FAT16 (via sudo gparted /dev/sdc); and repeated both usb_inst.sh and unetbootin methods - again no dice. Funny enough, in all of these cases, if I try to run the flash USB thumbdrive in the QEMU emulator:
# sudo apt-get install qemu
sudo qemu -hda /dev/sdc
... it boots fine - showing the syslinux menu and so on; however, boot always fails on the desktop.
Here I should mention, that I could write down the following from the boot screen of the problematic desktop PC:
Award Modular BIOS v6.00PG
AMDRS740 BIOS
It has a boot menu accessed via F12, and in the boot menu, among other options, these are for USB:
...
USB-FDD
USB-ZIP
USB-CDROM
USB-HDD
...
Typically, I choose USB-HDD - but I've tried the others; either the procedure freezes before even entering syslinux - or the boot fails as described above.
There is advice to rename directories/files manually from isolinux to syslinux (Trying to boot from usb - Ask Ubuntu) - when I used usb_inst.sh, only syslinux/isolinux.bin would have to be renamed. There is also advice to copy syslinux.cfg to the root of the USB flash thumbdrive (Cannot boot Live USB, Linux - Super User). But still no improvements - syslinux is still complaining that it is missing the configuration file - which apparently is the syslinux.cfg.
Then I tried to look if it is possible to somehow "debug" syslinux; found log tracing/debugging/trouble shooting in syslinux - The Syslinux Project - reboot.pro:
> Do we have specific commands to trace or log syslinux?
Being open source, one is able to compile Syslinux and enable extra debugging output.
also [SOLVED] Stuck on boot: Syslinux Problem [Archive] - Ubuntu Forums: "_
Debugging syslinux is described at http://www.syslinux.org/wiki/index.php/Development/Debugging , but effective debugging (if I recall correctly) requires recompiling it to add the debug hooks._". However, Development/Debugging - Syslinux Wiki talks about something called bochs; and I suspect that is to debug syslinux itself - not necessarily to "debug" (or query) the environment it is in.
Anyways, at last, I could see no way out but to get syslinux from source; basically, this was needed so it builds:
sudo apt-get install nasm
sudo apt-get install uuid-dev
git clone git://git.kernel.org/pub/scm/boot/syslinux/syslinux.git syslinux-git
cd syslinux-git/
make OPTFLAGS+=-DDEBUG=1
Turns out, it isn't really clear how to enable such debugging, that will show what syslinux "sees" when plugged in a given computer; given that I do load into syslinux at boot, the problem is what does it see as a filesystem. I tried to enable the DEBUG environment variable as shown above (after adding override OPTFLAGS := to the Makefile) - but that, in itself, generated no new messages during boot failure. I have used the following command to "burn" the USB thumbdrive (after unmounting it from the Gnome applet):
sudo ./linux/syslinux --stupid --directory /syslinux --install /dev/sdc1
... and I've tried both with stupid and without (and both for the source-built version, and the one from the Ubuntu package repositories for Natty).
Grepping through the source, I realized there is something called rosh (Read-Only SHell) - however, that compiles as a rosh.c32 - and one is supposed to have it as a boot kernel option in syslinux.cfg - which, as noted, I cannot load. So rosh.c32 is unfortunately not much help for my problem.
However, given that rosh implements the ls command, I tried to copy relevant portions into the code of syslinux - and trigger a ls / listing of the root when syslinux scans for the configuration file. With those changes, recorded in syslinux-e40ba60-rosh-ls.patch; now I get the following when I boot:
SYSLINUX 4.06 CHS 5-ge40ba60* Copyright (C) 1993-2010 H. Peter Anvin et al
Listing: "/"
rosh_ls_arg_dir 0 files found
Listing: "/syslinux"
Listing: ""
CurrentDirName: "/syslinux/"
confignamebuf: /syslinux/extlinux.conf; realpath -1
confignamebuf: /syslinux/syslinux.cfg; realpath -1
confignamebuf: /boot/syslinux/extlinux.conf; realpath -1
confignamebuf: /boot/syslinux/syslinux.cfg; realpath -1
confignamebuf: /syslinux/extlinux.conf; realpath -1
confignamebuf: /syslinux/syslinux.cfg; realpath -1
confignamebuf: /extlinux.conf; realpath -1
confignamebuf: /syslinux.cfg; realpath -1
ERROR: No configuration file found
No DEFAULT or UI configuration directive found!
Interestingly; for the root /, the _ls function at least returns "0 files"; the others ("/syslinux", and the empty string "") already fail at the opendir call - and so the _ls function doesn't even get called!
I would have thought that my slapstick copying of the ls function would not work as intended; but running the thumbdrive in qemu on netbook, does in fact provide a full listing of files - and given that at least for /, the function gets called and returns on the desktop - I'd suspect that it does indeed work.
However, that still doesn't solve my problem - why does syslinux, after boot, see 0 files under the root /? What else could I do to debug this problem? I wouldn't mind patching some C code into syslinux - but I just don't know what I should be looking for, that would point me to correct preparation of the USB thumbdrive for booting on the desktop machine...
OK, I got it to boot...
First, I noted there are alternative mbr's in the built git source as per Mbr - Syslinux Wiki and HowTos - Syslinux Wiki, so I tried both mbr.bin and altmbr.bin - altmbr.bin like this:
$ printf '\1' | cat mbr/altmbr.bin - | sudo dd bs=440 count=1 conv=notrunc iflag=fullblock of=/dev/sdc
... but that didn't help much.
Finally, I noted that lsusb says "bInterfaceProtocol 80 Bulk (Zip)"; and I remembered reading something about ZIP drives somewhere, so tried to look it up - and finally found this:
syslinux/doc/usbkey.txt
The proper mode to boot a USB key drive in is "USB-HDD". That is the
ONLY mode in which the C/H/S geometry encoded on the disk itself
doesn't have to match what the BIOS thinks it is. Since geometry on
USB drives is completely arbitrary, and can vary from BIOS to BIOS,
this is the only mode which will work in general.
Some BIOSes have been reported (in particular, certain versions of the
Award BIOS) that cannot boot USB keys in "USB-HDD" mode. This is a
very serious BIOS bug, but it is unfortunately rather typical of the
kind of quality we're seeing out of major BIOS vendors these days. On
these BIOSes, you're generally stuck booting them in USB-ZIP mode.
THIS MEANS THE FILESYSTEM IMAGE ON THE DISK HAS TO HAVE A CORRECT
ZIPDRIVE-COMPATIBLE GEOMETRY.
....
The script "mkdiskimage" which is supplied with the syslinux
distribution can be used to initialize USB keys in a Zip-like fashion.
To do that, calculate the correct number of cylinders (31 in the
example above), and, if your USB key is /dev/sda (CHECK THE KERNEL
MESSAGES CAREFULLY - IF YOU ENTER THE WRONG DISK DRIVE IT CANNOT BE
RECOVERED), run:
mkdiskimage -4 /dev/sda 0 64 32
(The 0 means automatically determine the size of the device, and -4
means mimic a zipdisk by using partition 4.)
So, as recommended there, first I find the number of cylinders for my thumbdrive:
$ grep 512-byte /var/log/syslog | tail -n 1
Mar 25 22:33:34 mypc kernel: [50884.608687] sd 45:0:0:0: [sdc] 4118528 512-byte logical blocks: (2.10 GB/1.96 GiB)
# get number of cylinders:
$ wcalc '4118528/(64*32)'
= 2011
... then I continue with mkdiskimage. After that was done, I tried usb_inst.sh again - and realized that it will overwrite the partition 4 that mkdiskimage made, and make a partition 1 for itself instead. That means, one should copy those files fron usb_inst.sh in a backup elsewhere, then run mkdiskimage - then finally copy the backed up files back to thumbdrive again; here is a command line log:
# mkdiskimage is present in syslinux-git:
$ ./utils/mkdiskimage
Usage: ./utils/mkdiskimage [-doFMz4][-i id] file c h s (max: 1024 256 63)
....
# ... but also in Debian/Ubuntu packaging of syslinux
$ mkdiskimage -4 /dev/sdc 0 64 32
/usr/bin/mkdiskimage: /dev/sdc: don't know how to determine the size of this device
# use sudo - note this command takes a while to complete:
$ sudo mkdiskimage -4 /dev/sdc 0 64 32
Warning: more than 1024 cylinders (2011).
Not all BIOSes will be able to boot this device.
$ ls /dev/sdc*
/dev/sdc /dev/sdc4
$ sudo fdisk -l /dev/sdc
Disk /dev/sdc: 2108 MB, 2108686336 bytes
64 heads, 32 sectors/track, 2011 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x866262cc
Device Boot Start End Blocks Id System
/dev/sdc4 * 1 2011 2059248 e W95 FAT16 (LBA)
# (make sure umounted / ejected)
# cd to usb_inst.sh directory; and
# run usb_inst.sh for /dev/sdc; note it will:
# write MBR and "Creating filesystem on /dev/sdc1..."
# and "installing boot loader on /dev/sdc1";
# regardless of the previous setup on partition 4:
sudo bash ./usb_inst.sh
# now no more partition 4:
$ ls /dev/sdc*
/dev/sdc /dev/sdc1
# ( mount /dev/sdc1 via disk applet )
$ rsync -a /media/SYSRESC /media/backup/
# ... duhh... - again now
# ( umount/eject via disk applet )
$ sudo mkdiskimage -4 /dev/sdc 0 64 32
Warning: more than 1024 cylinders (2011).
Not all BIOSes will be able to boot this device.
$ sudo ./linux/syslinux --install /dev/sdc4
# ( mount via disk applet )
$ rsync -a /media/backup/SYSRESC/ /media/31A8-40E9/
$ sudo qemu -hda /dev/sdc # works
# ( umount/eject via disk applet )
# boot on desktop - works! loads rescue64 and initram.igz...
The interesting thing is - even if there is the warning "Not all BIOSes will be able to boot this device."; somehow this problematic BIOS loads this thumbdrive without a problem (and the _ls function above lists fine). Also interesting - here I choose the USB-HDD boot option (not the USB-ZIP) and it still works ?!
So, as a partial answer - I guess the way to debug this, would be for syslinux to somehow write on the thumbdrive the CHS geometry it sees during the syslinux installation; and on boot, to query the BIOS (I guess) about which CHS geometry the BIOS sees - and then dump these two geometries to screen; if there is a mismatch, then it is likely one should run mkdiskimage (unfortunately, I wouldn't know how to code that into syslinux)
Going back to my original HDD problem - turns out also SystemRescueCD uses udev to probe for devices - and again the boot process cannot complete (even if I choose the boot option "all files to memory (docache)")... So I get messages like:
udevadm settle - timeout of 180 seconds reached, the event queue contains:
Activating dmraid (fake hardware raid) ...
Starting mdadm (linux software raid) ....
udevd[88] worker [91] unexpectedly returned with status 0x0100 ...
udevd[88] worker [91] failed while handling '/devices/pci0000:00/.../sdb/sdb1'
So, I either find a Live USB distro which does not probe for disks using udev - or I better take this HDD out, toss it into a HDD USB enclosure, and try fsck it on another computer (hopefully I'll be able to blacklist this drive from udev on a running system)
Edit Aug 24 2013: Back to this problem, I thought I'd jot down few extra notes:
Since I cannot yet afford the time to fix this PC and its faulty drive, I've used this USB thumbdrive to boot multiple operating systems: PartedMagic and SliTaz did also encounter errors on the hard disk - but apparently use different drivers to access it (so the DRDY ERR loop didn't start), and they could finish booting relatively fast. Then I tried building a custom Ubuntu 12.04 image (using ubuntu-builder) - and this one ended up in a DRDY ERR loop, which may take more than 5 minutes to complete, before the OS finishes booting. I have posted more about this in Bug #1216397 “
It should be possible to ignore (skip probing) a known bad disk partition at boot” : Bugs : “linux” package : Ubuntu.
There are a few interesting things in respect to syslinux, now that this USB thumbdrive is used to boot multiple operating systems. First of all, the thumbdrive is, still, first made bootable with syslinux --install while empty (which places a file ldlinux.sys in the partition's root) - which corresponds to the mkdiskimage step above; and only afterwards are files (like kernel images, and including /boot/syslinux/syslinux.cfg) copied to it.
Now, I'd first build the CD image ISO in ubuntu-builder, and test it using VirtualBox (as qemu on my machine is way too slow for that). Once the ISO image was shown to work as expected, then only the files under its casper directory are relevant for the USB thumbdrive thus prepared; and they can be referenced through a boot menu entry in syslinux.cfg. So, I'd edit the syslinux.cfg on the thumbdrive, and copy the casper image files (e.g. filesystem.squashfs) to the thumbdrive - and test it with qemu as above. Once this qemu step passed, I'd move the USB thumbdrive on the target PC with the broken drive - and interestingly, here I might get syslinux boot failures of multiple sorts (during different boot stages):
"No DEFAULT or UI configuration directive found!" (or sometimes a "Bad <something> ..." message), before the syslinux boot menu is shown - even if the debug, as above, would show that syslinux reads the filesystem on the thumbdrive correctly, and finds the /boot/syslinux/syslinux.cfg (which does have proper directives)!
"Invalid or corrupt kernel image", once the syslinux menu is shown, and the new kernel image (Ubuntu) chosen - even if the other images (found previously on the thumb) boot fine on the broken drive PC; and the new image boots fine from thumb in qemu on a different machine!
"/init: line 7: can't open /dev/sr0: no medium found", once the new (Ubuntu) image is chosen from syslinux menu, and it starts booting; this seems an Ubuntu specific message, appearing a few seconds after it starts booting. I still encounter it even if booting completes succesfully - when it's a problem, this message just loops repeatedly, not allowing the rest of the boot process to complete
It turns out, any of these can appear whenever I try to change and save the syslinux.cfg file on the thumbdrive; or when I make changes in the casper image files, and I rsync or copy them to the thumbdrive. Maybe the copying process (since it may change the sectors where the files are located on the thumb), "confuses" parts of the boot process - although, this shouldn't happen, since also the working procedure above starts from a blanked, syslinux'd thumbdrive, to which files are copied after; so I think this may point to failing sectors on the thumbdrive.
However, even in this state, the working procedure above seemed to be useful - because using it, I could recover the thumb back to a working state! In more detail, it goes like this:
Keep a copy of the thumbdrive files somewhere on a different disk (e.g. ~/thumbcopy) - but without the ldlinux.sys file.
Whenever you want to make a change (to syslinux.cfg or to bootable image files) - make sure this change is saved in ~/thumbcopy first
Now, say I've changed some files on the bootable thumbdrive directly, and I encounter one of the errors above. Then:
First, delete all files but the ldlinux.sys on the thumbdrive, e.g.: rm -rf $(ls -I"ldlinux.sys" /media/31A8-40E9/)
Then, rsync or copy (cp -arv ...) the files in ~/thumbcopy to the thumbdrive, e.g.: rsync -aP ~/thumbcopy/ /media/31A8-40E9/
Now, try boot the thumbdrive in the PC again - it usually boots fine!
I've encountered all three types of errors, because I'd often try to change/copy individual files directly in the thumbdrive: sometimes the change doesn't introduce a problem, so booting is fine - however, in many cases, it does introduce a problem. For some reason, using the above procedure I managed to recover the thumbdrive from either type of abovementioned problems - maybe it has to do with USB Flash delayed writes, maybe with USB Flash failing sectors, I cannot really tell... But in any case: deleting all files, and re-copying them in one go, does seem to be a worthwhile procedure to try in case of errors like that.
It's an ancient post, but in case others stumble upon this, I'll add an answer anyway.
If you're struggling to get syslinux to boot, ROSH (Read-only Shell) can be useful, as you mentioned. To start ROSH, you can simply type rosh at the boot: prompt (if you do have a working graphical menu, press escape to drop back to the boot: prompt.
Inside the shell, you have some basic commands to look around in your environment. For more documentation, see https://wiki.syslinux.org/wiki/index.php?title=Read-Only_SHell(rosh.c32)
I've been trying to build and boot OpenEmbedded-Core on the evaluation kit for Freescale's ARM i.MX28, using the Freescale ARM layer for OpenEmbedded-Core. Unfortunately, I can't find a basic "Getting Started" guide (though there is a Yocto getting-started guide). Unfortunately, I haven't been able to "get started", to the point of successfully booting to a basic command prompt on the board's debug serial port.
Here is what I've been able to piece together, and as far as I've managed to get so far.
Fetch sources
mkdir -p oe-core/freescale-arm
cd oe-core/freescale-arm
git clone git://git.openembedded.org/openembedded-core oe-core
git clone git://github.com/Freescale/meta-fsl-arm.git
cd oe-core
git clone git://git.openembedded.org/meta-openembedded
git clone git://git.openembedded.org/bitbake bitbake
Set up environment
. ./oe-init-build-env
That puts us in a new sub-directory build and sets certain environment variables.
Edit configuration
Edit the conf/bblayers.conf and local.conf files:
conf/bblayers.conf should have the meta-fls-arm and meta-oe layers added for BBLAYERS. E.g.:
BBLAYERS ?= " \
/home/craigm/oe-core/freescale-arm/oe-core/meta \
/home/craigm/oe-core/freescale-arm/oe-core/meta-openembedded/meta-oe \
${TOPDIR}/../../meta-fsl-arm \
"
In conf/local.conf, I set:
BB_NUMBER_THREADS = "4"
PARALLEL_MAKE = "-j 4"
MACHINE = "imx28evk"
Build
bitbake core-image-minimal
I ran this build overnight, and it has completed successfully for me. Output files were in ~/oe-core/freescale-arm/oe-core/build/tmp-eglibc/deploy/images.
There are two boot options that I'd like to try, as described below. Boot from SD card is simpler, but takes quite a long time (~30 min) to write the image to the SD card. Booting from TFTP + NFS is faster, but requires more set-up.
Boot from SD Card
Write image to SD card:
sudo dd if=tmp-eglibc/deploy/images/core-image-minimal-imx28evk.sdcard of=/dev/sdc
It took something like 30 minutes (3.5 GB file). Then I put it in the board's SD card slot 0, and powered-up. It got as far as loading the kernel, then stopped:
U-Boot 2012.04.01-00059-g4e6e824 (Aug 23 2012 - 18:08:54)
Freescale i.MX28 family at 454 MHz
BOOT: SSP SD/MMC #0, 3V3
DRAM: 128 MiB
MMC: MXS MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: FEC0, FEC1
Hit any key to stop autoboot: 0
reading boot.scr
** Unable to read "boot.scr" from mmc 0:2 **
reading uImage
2598200 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-2.6.35.3-11.09.01+yocto-20
Created: 2012-08-23 7:53:40 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2598136 Bytes = 2.5 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Boot from TFTP + NFS
First, I tried to write U-Boot onto an SD card:
sudo dd if=tmp-eglibc/deploy/images/u-boot-imx28evk.mxsboot-sdcard of=/dev/sdc
Then I put it in the board's SD card slot 0, and powered-up. But all I got in the debug serial port was:
0x8020a01d
So, I decided to use Freescale's distribution of U-Boot for i.MX28 (from their LTIB distribution) onto an SD card. I set suitable U-Boot parameters for NFS booting with parameters from DHCP.
setenv bootargs console=ttyAMA0,115200n8
setenv bootargs_nfs setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp nfsroot=,v3,tcp fec_mac=${ethaddr}
saveenv
I connected to a DD-WRT router with the following DNSmasq settings:
dhcp-boot=,,192.168.250.106
dhcp-option=17,"192.168.250.106:/home/craigm/rootfs"
On my host PC, I set up a TFTP server to serve the uImage file from ~/oe-core/freescale-arm/oe-core/build/tmp-eglibc/deploy/images/.
I also set up a root NFS server to serve the root file system. I edited /etc/exports to serve /home/craigm/rootfs. I extracted the root file system:
bitbake meta-ide-support
rm -Rf ~/rootfs
runqemu-extract-sdk tmp-eglibc/deploy/images/core-image-minimal-imx28evk.tar.bz2 ~/rootfs
Then I put the U-Boot SD card in the board's SD card slot 0, and powered-up. It got as far as this, then stopped:
...
TCP cubic registered
NET: Registered protocol family 17
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
can: raw protocol (rev 20090105)
mxs-rtc mxs-rtc.0: setting system clock to 1970-01-01 00:03:33 UTC (213)
eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
eth1: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
Sending DHCP requests .
PHY: 0:00 - Link is Up - 100/Full
., OK
IP-Config: Got DHCP answer from 192.168.250.106, my address is 192.168.250.142
IP-Config: Complete:
device=eth0, addr=192.168.250.142, mask=255.255.255.0, gw=192.168.250.1,
host=192.168.250.142, domain=, nis-domain=(none),
bootserver=192.168.250.106, rootserver=192.168.250.106, rootpath=/home/craigm/rootfs
Looking up port of RPC 100003/3 on 192.168.250.106
Looking up port of RPC 100005/3 on 192.168.250.106
VFS: Mounted root (nfs filesystem) on device 0:15.
Freeing init memory: 160K
I'm not sure if it's running without a serial console, or some other problem. I can ping it on 192.168.250.142, but I can't Telnet or SSH to it.
Questions
Is there any sort of "getting started" guide for OpenEmbedded-Core on Freescale's i.MX28?
Is the Freescale ARM layer really intended for use with OpenEmbedded-Core, Yocto, or what? I don't really understand how those projects relate.
Has anyone else had success booting a minimal image of OpenEmbedded-Core on Freescale's i.MX28? If so, how did your procedure differ from mine?
I'm not sure at this stage whether the problem is just a non-functional serial console, or some other sort of issue. It's hard to diagnose these problems that prevent even getting a basic system running. Any pointers on how to diagnose at this point?
Why would the U-Boot be broken so it can't even boot?
From the boot message it looks like U-boot is working fine. U-boot is not broken.
The following boot message
2598200 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-2.6.35.3-11.09.01+yocto-20
Created: 2012-08-23 7:53:40 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2598136 Bytes = 2.5 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
By the above log u-boot has done its job.
"Booting the kernel" is the point where bootloader given the control to the kernel.
I guess the problem might be in kernel image or in memory.
To eliminate the problem of memory, try to check the manual and try to read and write in the RAM using the board's reference manual.
From the boot log RAM looks like has no problem. It has been initialized.
DRAM: 128 MiB
Check if the following message is not causing any problem.
* Warning - bad CRC, using default environment
Check if all the devices have been initialized and nothing is skipped after the bad crc warning.