When installing the LiveShare extension in a devContainer instance I get an error.
For example using: https://github.com/microsoft/vscode-remote-try-go/ and then adding the extension to the devcontainer.json file
"extensions": [
"ms-vscode.go",
"ms-vsliveshare.vsliveshare-pack"
]
When I attempt to start a liveshare I see:
Agent terminated with exit code: 0 and signal null: FailFast: Couldn't find a valid ICU package installed on the system. Set the configuration flag System.Globalization.Invariant to true if you want to run with no globalization support.at System.Environment.FailFast(System.String) at System.Globalization.GlobalizationMode.GetGlobalizationInvariantMode() at System.Globalization.GlobalizationMode..cctor() at System.Globalization.CultureData.CreateCultureWithInvariantData() at System.Globalization.CultureData.get_Invariant() at System.Globalization.CultureInfo..cctor() at System.StringComparer..cctor() at System.AppDomain.InitializeCompatibilityFlags() at System.AppDomain.Setup(System.Object)Aborted (core dumped)
So it turns out that this requires the docker images to install icu tools and then things function as expected.
For the golang image I added:
RUN apt update && apt install icu-devtools -y
The rebuild the container and things worked nicely.
One thing to note is that you need to use the alternative sign in flow using a code to signin
Related
I have installed opam 2.1.0 on a Linux Virtualbox VM. When I try opam init, I get the following error:
<><> Fetching repository information ><><><><><><><><><><><><><><><><><><><><><>
[ERROR] Could not update repository "default": OpamDownload.Download_fail(_, "Curl
failed: \"/snap/bin/curl --write-out %{http_code}\\\\n --retry 3
--retry-delay 2 --user-agent opam/2.1.0 -L -o
/tmp/opam-32196-d33843/index.tar.gz.part --
https://opam.ocaml.org/index.tar.gz\" exited with code 23")
[ERROR] Initial download of repository failed.
Running with --disable-sandboxing doesn't help. I know that its a problem creating/writing to /tmp/opam-... directory because if I replace that with my current directory or home directory the command by itself runs fine. It also runs fine with /tmp/opam-... if I use the --create-dirs option in curl but I don't have any way of getting opam init to use that option. Any ideas?
thanks
Update
The reason opam init failed for me was because curl was installed with snap on my system. This exactly what is going on with your VM.
Try to run opam init -verbose and that could reveal more about why you ran into an error.
In my case I needed to install other things with opam and it kept failing every time. So snap uninstall curl and then sudo apt install curl fixed things. (Was only able to figure this out with help from my professor)
Workaround
I ran into the same issue and I found a workaround on the OCaml forum: here. (Credits to UnixJunkie)
You can run:
opam init github git+https://github.com/ocaml/opam-repository.git
This should avoid the certificate issues. This worked for me.
I tried to fix the certificate issues using this answer as well. You could try doing that, but it seems complicated when the workaround is to simply point it to the github repo directly.
This question is similar to this one.
Can I get a tip for installing on rasp buster? Im hung up on the install directions to check the status of the rabbitMQ server. Traceback of bash console:
(volttron) pi#raspberry:~/Desktop/volttron $ echo 'export RABBITMQ_HOME=$HOME/rabbitmq_server/rabbitmq_server-3.7.7'|sudo tee --append ~/.bashrc
export RABBITMQ_HOME=$HOME/rabbitmq_server/rabbitmq_server-3.7.7
(volttron) pi#raspberry:~/Desktop/volttron $ source ~/.bashrc
pi#raspberry:~/Desktop/volttron $ RABBITMQ_HOME/sbin/rabbitmqctl status
bash: RABBITMQ_HOME/sbin/rabbitmqctl: No such file or directory
There are a few tracebacks earlier on the installation...
If it makes a difference or not here is the entire bash console process. The git gist link I just created the name install.py even though its just bash commands copied pasted per install directions...
`pi#raspberry:~/Desktop $ git clone https://github.com/VOLTTRON/volttron --branch releases/7.x`
It looks like there are a couple of different issues going on here:
The issue you quote above (RABBITMQ_HOME/sbin/rabbitmqctl: No such file or directory) is that your shell isn't finding the rabbitmqctl command. It looks like you added the RABBITMQ_HOME environment variable to your .bashrc, but used the string RABBITMQ_HOME instead of the variable expansion $RABBITMQ_HOME when you tried to run the command. Try running it as $RABBITMQ_HOME/sbin/rabbitmqctl status instead.
The rabbitmqctl status command will check the status of the rabbitmq application, but I don't think you've done anything to start it yet (that happens when you bootstrap the platform and/or start the platform configured to use the RMQ broker)
I think that the traces earlier in the installation process are problematic (appears to be the same error hit two different ways), but you just haven't run into them yet. I haven't seen any issues building gevent on the RPi 4 with buster (though it is pretty slow), but the ctypes error makes me wonder if there's an issue with the underlying c library it is trying to build on top of. I did notice that you're getting amd64 erlang packages, are you running Raspbian on an x86 processor? (if so this isn't a permutation we've tried and you may be hitting some package compatibility edge case we haven't seen)
One thing to try is to manually install cython into your virtualenvironment and then try running the bootstrap script again with the virtualenvironment activated. You could also try and pip install gevent==20.6.1 directly in that virtualenvironment (this is what the bootstrap script was doing at the failure point). VOLTTRON depends on gevent, so if that isn't installing the platform won't be able to run.
I tried to import the biopython package in Spyder and got the error message:
ModuleNotFoundError: No module named 'biopython'
although biopython is installed.
I also checked the PYTHONPATH: there is a path set into the directory where the packages are stored.
Can somebody help? Did I miss something? Thanks for your help!
If you're using Anaconda, it's best to install all the packages you want from Anaconda if possible. You can check if a package is available with (e.g.):
conda search biopython
When I try that command it shows that biopython is available, so assuming you have access to the standard conda channels you should be able to get it this way.
Assuming you haven't already created a conda environment to work with, start by creating a new one with the packages you want to use:
conda create -n myenvname spyder biopython
where myenvname is the name you want to give the environment - call it whatever you like. If you want to use other packages as well, add their names to the end of this command. Then once the env is completed, activate it:
activate myenvname
or if this doesn't work, on Mac or Linux:
source activate myenvname
and start Spyder in this environment:
spyder
Each time you want to use this environment in future you will need to activate it first. You may also be able to do some of these tasks through the Anaconda Navigator or via Start menu shortcuts but the command line version will always work.
If there's a package you want that isn't available from conda but is available via pip, just use the pip command after creating and activating the environment.
If you are using Anaconda, a solution could be
conda install -c main biopython
following https://anaconda.org/main/biopython.
The official repository page helped me when I got your error message because numpy was not in place.
I'm trying to install node-sass module using npm but each time an error displayed about a problem in network configuration that's because i'm using proxy and private registry this is the error :
This is most likely not a problem with node-gyp or the package itself and is related to network connectivity In most cases you are behind a proxy or have bad network setting
Is it possible to install this module offline ?
I had a similar problem, while trying to install node-sass behind a corporate proxy.
What you can try is:
Download it locally from here:https://github.com/sass/node-sass/releases (choose the right one depending on your OS)
Use the binary configuration parameter –sass-binary-path. to install it.
npm install --sass-binary-path="C:\src\v4.7.2\win32-x64-57_binding.node"
How-to
Download the binary here: https://github.com/sass/node-sass/releases
It vary depending on your OS and node version.
Set up env variable (see https://github.com/sass/node-sass#binary-configuration-parameters)
export SASS_BINARY_PATH=<absolute_path_to_file>
Replace <absolute_path_to_file> by the path to the file you have downloaded. The path should be absolute, and in linux format (if you use git bash, with cmd use Windows format). To get the absolute path, you can go to the directory, open a git bash console and do pwd, append the filename, and you should have something like /c/Users/you/SOFTWARE/win32-x64-64_binding.node.
Install (locally)
npm i node-sass --save
You need to export the variable once for each opened terminal using node-sass. Meaning you should add the export line to your npm start. (so you gotta keep the file you downloaded somewhere safe).
For example you can do "start:dev": "set SASS_BINARY_PATH=%cd%\\win32-x64-64_binding.node && npm start". In this case, the sass binary is inside my project, making it easier for new collaborators. We are using set instead of export because Jetbrain IDE use by default cmd (Windows terminal).
Miscellaneous
If you get an error message like:
Testing binary
Binary has a problem: Error: The module '\\?\C:\Users\myself\SOFTWARE\win32-x64-72_binding.node'
was compiled against a different Node.js version using
NODE_MODULE_VERSION 72. This version of Node.js requires
NODE_MODULE_VERSION 64. Please try re-compiling or re-installing
It means it have found your binary, but you took the wrong one for your current node version. Dowload the correct version, and do theses above step again.
when using npm start if you have (used on a react-script project):
./src/product-card-list/product-card-list.component.module.scss (./node_modules/css-loader/dist/cjs.js??ref--6-oneOf-6-1!./node_modules/postcss-loader/src??postcss!./node_modules/sass-loader/lib/loader.js??ref--6-oneOf-6-3!./src/product-card-list/product-card-list.component.module.scss)
Error: ENOENT: no such file or directory, scandir 'C:\Users\myself\PROJECTS\advisor_spa\node_modules\node-sass\vendor'
You failed step 4. Export SASS_BINARY_PATH again and it should work.
If you use Webstorm, you can make run configuration for npm start and add full path SASS_BINARY_PATH=C:\Users\myself\SOFTWARE\win32-x64-64_binding.node environment variable (for Windows).
If you use Visual Code on Windows, you can add a system env variable, at the same level as PATH (not inside PATH).
I am following this tutorial: https://wiki.opendaylight.org/view/Getting_started
I am trying to use the following code in opendaylight using karaf
ovs-vsctl show
But the command window says Command not found: ovs-vsctl
I have installed all the necessary libraries and the local host server (http://localhost:8181/dlux/index.html) is running fine. But somehow odl can't find ovs.
Can anyone tell me what's the error? I am running win 8.
Thank you
You need to run this command outside of karaf terminal.
Firstly, you should have ovs(Open Virtual Switch) or Mininet installed, and then create one or two open switches.
Basically, you started the SDN controller in karaf, and now in the step you are encountering problem, the switches need to be assigned ODL controller as their manager.
You must check also that ovsdb is already installed in karaf.
For that, try to execute the next command:
feature:list | grep ovsdb
That command will display all the ovsdb components/features that are available in your karaf distribution. The third column will indicate you if a given component is already installed or not (if you see an X, that means that the component is installed). If you want to install a component/feature:
feature:install <name_of_the_feature>
After that, try to execute it outside of karaf, as Sidhant01 has indicated you before.
Try to do it with sudo:
sudo ovs-vsctl show.
If you want to configure ovsdb in an active mode:
tools-vm:~$ sudo ovs-vsctl set-manager tcp:127.0.0.1:6640
tools-vm:~$ sudo ovs-vsctl show
98d8cf7a-44b1-4b02-a60c-7d832409d06f
Manager "tcp:127.0.0.1:6640"
is_connected: true
ovs_version: "2.0.2"
Cheers