When I run my Jenkins build for my React Native project it fails with the following errors:
Unable to resolve module `reactotron-core-client` from `/Users/nfib/Jenkins/Jenkins-Workspaces/ENGA/ENGAL/node_modules/reactotron-redux/dist/index.js`: Module does not exist in the module map
Execution failed for task ':app:bundleDevReleaseJsAndAssets'.
I followed the recommended rm -rf node_modules && npm install but I am not exactly sure that this would help since it seems to me like its a generic solution from the npm team.
React-Native version: 0.53.3 with "reactotron-react-native": "3.5.0", "reactotron-redux": "3.1.0",
Has anyone had similar issues to this? How can I ensure this does not continue to happen?
The issue is your Jenkins build server is unable to locate the reactotron-core-client module which is necessary to complete your Jenkins build. You can see this from your stack trace:
Unable to resolve module reactotron-core-client
The recommended solution from the npm team of:
rm -rf node_modules && npm install
is a generic solution because this command will remove your previous node_modules directory containing your project's dependencies and then reinstall the listed dependencies within in your project's package.json file. This may resolve issues stemming from your lock file as well as versioning issues if npm has been updated on your build server.
This solution may resolve your issue if all of your project's required libraries are listed within your package.json file. However, if the reactotron-core-client library isn't listed as a required dependency within your package.json file this problem will persist moving forward. Perhaps you could try the following:
npm i --save reactotron-core-client
as this will save and install the reactotron-core-client dependency for your project. By save I mean list this library as dependency within your package.json file.
Ideally, moving forward your best bet is to keep your package.json file up-to-date with your project's dependencies as well as installing dependencies prior to attempting a Jenkins build.
Hopefully that helps!
Related
I am fairly new to ReactJS and was messing around with Material UI in a build I'm working on. I installed the package and it completely messed up my build and the ability to open the server.
When I do
npm start
I get the following error:
`> react-scripts start
There might be a problem with the project dependency tree.
It is likely not a bug in Create React App, but something you need to fix locally.
The react-scripts package provided by Create React App requires a dependency:
"babel-jest": "23.6.0"
Don't try to install it manually: your package manager does it automatically.
However, a different version of babel-jest was detected higher up in the tree:
/Users/peter/node_modules/babel-jest (version: 27.5.1)
Manually installing incompatible versions is known to cause hard-to-debug issues.
If you would prefer to ignore this check, add SKIP_PREFLIGHT_CHECK=true to an .env file in your project.
That will permanently disable this message but you might encounter other issues.
To fix the dependency tree, try following the steps below in the exact order:
Delete package-lock.json (not package.json!) and/or yarn.lock in your project folder.
Delete node_modules in your project folder.
Remove "babel-jest" from dependencies and/or devDependencies in the package.json file in your project folder.
Run npm install or yarn, depending on the package manager you use.
In most cases, this should be enough to fix the problem.
If this has not helped, there are a few other things you can try:
If you used npm, install yarn (http://yarnpkg.com/) and repeat the above steps with it instead.
This may help because npm has known issues with package hoisting which may get resolved in future versions.
Check if /Users/peter/node_modules/babel-jest is outside your project directory.
For example, you might have accidentally installed something in your home folder.
Try running npm ls babel-jest in your project folder.
This will tell you which other package (apart from the expected react-scripts) installed babel-jest.
If nothing else helps, add SKIP_PREFLIGHT_CHECK=true to an .env file in your project.
That would permanently disable this preflight check in case you want to proceed anyway.`
When I follow the directions, nothing changes. I did clean install of npm and I created the .env file that it asked.
Is my build just completely ruined?
The error is because you have a node_modules folder in your home directory (/Users/peter/), (which I assume is unintended, and react-scripts thinks that your home folder contains a Node.js project). To fix the error, you should remove that directory (e.g. rm -rf /Users/peter/node_modules)
I'm working on an NPM package right now.
The main code for the package (repo/src/maincode.js) has a few dev dependencies and a few dependencies needed to run it. When the user installs the npm package (through npm i) these dependencies will need be installed.
Now, that being said, I also want to create a react project that showcases this npm package, and have it live in the same repo, in an examples directory (repo/examples/react/app.js). This react app may have its own dependencies and dev dependencies, but I really don't want all of these to be forced onto the user when they're installing my npm package just to use in their projects.
How might I go about solving this problem? Is there a way to create a set of dependencies that are only installed if you are running a particular script, or running example code ?
You can give the examples directory its own package.json file and instruct folks who want to run the examples to cd into the examples directory and run npm i there. Any code in the examples directory that imports a module will look in its own node_modules before checking the node_modules in the parent directory.
The MarkoJS examples repository takes this approach and even makes it more granular. Instead of having a single package.json for the examples directory, there is a package.json for each separate example.
If you want, you can create a helper script in the main package.json for the user so they can do something like npm run build-examples and it will do the npm install for them as part of the process.
Quite new to react, and can not find an answer to the simplest of tasks. Just trying to clone a repo to my computer and run it. For example https://github.com/arnab-datta/counter-app .
I do npm install and npm start. But when I do npm start I seem to have dependency errors with a "babel-loader". It gives me the below list of steps to solve the problem, I went through them all and still no success. No matter what project I try to repo the error is always this babel-loader. I am new to react and getting very frustrated being unable to do the simplest of things.
There might be a problem with the project dependency tree. It is
likely not a bug in Create React App, but something you need to fix
locally.
The react-scripts package provided by Create React App requires a
dependency:
"babel-loader": "8.0.5"
Don't try to install it manually: your package manager does it
automatically. However, a different version of babel-loader was
detected higher up in the tree:
/Users/xxx/node_modules/babel-loader (version: 8.0.6)
Manually installing incompatible versions is known to cause
hard-to-debug issues.
If you would prefer to ignore this check, add
SKIP_PREFLIGHT_CHECK=true to an .env file in your project. That will
permanently disable this message but you might encounter other issues.
To fix the dependency tree, try following the steps below in the exact
order:
Delete package-lock.json (not package.json!) and/or yarn.lock in your project folder.
Delete node_modules in your project folder.
Remove "babel-loader" from dependencies and/or devDependencies in the package.json file in your project folder.
Run npm install or yarn, depending on the package manager you use.
In most cases, this should be enough to fix the problem. If this has
not helped, there are a few other things you can try:
If you used npm, install yarn (http://yarnpkg.com/) and repeat the above steps with it instead.
This may help because npm has known issues with package hoisting which may get resolved in future versions.
Check if /Users/tylervanzo/node_modules/babel-loader is outside your project directory.
For example, you might have accidentally installed something in your home folder.
Try running npm ls babel-loader in your project folder.
This will tell you which other package (apart from the expected react-scripts) installed babel-loader.
If nothing else helps, add SKIP_PREFLIGHT_CHECK=true to an .env file
in your project. That would permanently disable this preflight check
in case you want to proceed anyway.
I am trying to create a React.js App however once created and I try to run using 'yarn start' in the terminal I get this:
yarn run v1.12.3
$ react-scripts start
There might be a problem with the project dependency tree.
It is likely not a bug in Create React App, but something you need to fix locally.
The react-scripts package provided by Create React App requires a dependency:
"babel-eslint": "10.0.1"
Don't try to install it manually: your package manager does it automatically.
However, a different version of babel-eslint was detected higher up in the tree:
/Users/olliesaunderson/node_modules/babel-eslint (version: 9.0.0)
Manually installing incompatible versions is known to cause hard-to-debug issues.
If you would prefer to ignore this check, add SKIP_PREFLIGHT_CHECK=true to an .env file in your project.
That will permanently disable this message but you might encounter other issues.
To fix the dependency tree, try following the steps below in the exact order:
1. Delete package-lock.json (not package.json!) and/or yarn.lock in your project folder.
2. Delete node_modules in your project folder.
3. Remove "babel-eslint" from dependencies and/or devDependencies in the package.json file in your project folder.
4. Run npm install or yarn, depending on the package manager you use.
In most cases, this should be enough to fix the problem.
If this has not helped, there are a few other things you can try:
5. If you used npm, install yarn (http://yarnpkg.com/) and repeat the above steps with it instead.
This may help because npm has known issues with package hoisting which may get resolved in future versions.
6. Check if /Users/olliesaunderson/node_modules/babel-eslint is outside your project directory.
For example, you might have accidentally installed something in your home folder.
7. Try running npm ls babel-eslint in your project folder.
This will tell you which other package (apart from the expected react-scripts) installed babel-eslint.
If nothing else helps, add SKIP_PREFLIGHT_CHECK=true to an .env file in your project.
That would permanently disable this preflight check in case you want to proceed anyway.
P.S. We know this message is long but please read the steps above :-) We hope you find them helpful!
error Command failed with exit code 1.
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.
I have tried following the steps suggested however none of this seems to works. I have also tried yarn add --exact react-scripts#3.0.1 and yarn cache clean
I fixed it!
So as the error shows, there is an existing folder of 'babel-eslint' somewhere higher up in my dependency tree. All I had to do was search in finder for that folder and then delete it, once done you can just 'yarn install' again and 'yarn start' then it should work :)
I have no idea where this other 'babel-eslint' folder came from btw...
First time user of npm and bower. I am able to install packages correctly but I am not sure how the dependencies work? As an example, I did "npm install angularjs" in my application root which created a folder "node_modules/angularjs/" with some files in it. I can also see that there is a package.json file within the angularjs folder, and it looks like it has not been processed as there is numerous packages listed in it and not installed.
Long story short, should I install all these packages manually or is there a built in feature that npm/bower can also process these sets of dependencies?
UPDATE:
I greatly lack the ability to ask precise questions, I apologise to those who have answered and did not give the correct sypnosis.
What I expect to happen:
Using npm or bower, I want to clarify that if I do an install of one of their packages, will it automatically also install the new package's dependancies or would I need to do a npm/bower install for each of the packages.json or bower.json files manually?
What I did to try make it work:
Created folder D:\Websites\TestSite
Within the folder through CMD, I did a "npm init" and ran through the guide
I followed that up with a "npm install angularjs"
A new folder was created D:\Websites\TestSite\node_modules\angularjs and within this folder there was a "index.js" and package.json file
Opening index.js I get a "require("angular");" and module.exports = window.angular.
The package.json file contains a number of dependancies which has not been installed.
My Result:
As per my expectations, npm install in point 3 above did not install the dependancies of the package.json file after it installed angularjs.
I am not sure but I assume that the index.js file needs to be included in my html and that it required the requirejs library initiated? If this is the case, then requirejs (which I do not have installed on my site) should be a dependancy for angularjs to work, and should be installed prior to giving me the ability to try and initiate it?
Am I missing a step or misunderstanding the functionality of NPM/Bower? Thank you for your patience!
Npm and Bower are great tools for managing your dependencies, i'll try to make it clear in a few words.
In general npm is used for managing your back-end dependencies and Bower is responsible for your front end dependencies.
There are 2 config files:
package.json, here are listed your dependencies that are not used in browser(e.g. bower, grunt). To install all dependencies in package.json run npm install.
Bower.json, here will be listed your "in browser" dependencies(e.g angular, jQuery). Run bower install to install all dependencies listed here in bower_components
You can find a extended guide i wrote here.