I'm setting up a new remote host and every time i initiate it i get the following error output: Any feedback or direction on how to resolve this issue?
Pseudo-terminal will not be allocated because stdin is not a terminal.
Linux Destiny 4.9.0-9-amd64 #1 SMP Debian 4.9.168-1 (2019-04-12) x86_64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
mesg: ttyname failed: Inappropriate ioctl for device
bash: cannot set terminal process group (3202): Inappropriate ioctl for device
bash: no job control in this shell
mesg: ttyname failed: Inappropriate ioctl for device
Installing...
Downloading with wget
WARNING: tar exited with non-0 exit code
Found running server...
*
* Reminder: You may only use this software with Visual Studio family products,
* as described in the license (https://go.microsoft.com/fwlink/?linkid=2077057)
*
cat: /root/.vscode-remote/.473af338e1bd9ad4d9853933da1cd9d5d9e07dc9.log: No such
file or directory
Server did not start successfully. Full server log:
cat: /root/.vscode-remote/.X.log51ec4692-
4da4-4ec0-b613-5a3563034cf1====
: No such file or directory
"install" terminal command done
Received install output: : No such file or directory
Failed to parse remote port from server output: : No such file or directory
If the server fails to shut down properly, sometimes it leaves dangling lockfiles. This can cause startup to fail and produce the "Failed to parse remote port from server output" error message. In this case the solution is to simply to delete the lockfiles:
.vscode-server/bin/[:xdigit:]*/vscode-remote-lock.*
Fixed the issue. It appears I had 2 other server agents running incorrectly. I killed both server agents using kill (PID) and removed ".vscode_remote" directory from user home directory. Then i reinitialized remote-ssh from vscode. Successfully connected!
On remote machine you do not have a tar installed. It's in log output
Installing... Downloading with wget
WARNING: tar exited with non-0 exit code
so under a root run:
apt-get install tar
or with sudo, if you have a user with sudoers configured:
sudo apt-get install tar
I also got the same issue and my workaround was to provide proper rights to the home or user folder, so vscode can create a remote folder and do the required installation on it.
Example :
sudo chmod -R 777 home/
In this case, I have provided all rights to my home folder and It worked like a charm for all the users.
I ssh'd onto the remote server (linux) and then deleted both directories as follows:
$ rm -r .vscode-server.backup2022-04-03T16:20:18-05:00
$ rm -r .vscode-server
In case someone else encounters the same issue - I had an instance where remote target had no space left on device. After extending root volume of target machine, connection worked fine.
I had the same issue because vscode was looking for my .vscode-server directory in the wrong location (it was in a custom location due to restrictions on where files can be saved). This can be fixed by using How to change vscode-server directory. Specifically add:
"remote.SSH.lockfilesInTmp": true,
"remote.SSH.serverInstallPath":{
"hostname":"/path/to/.vscode-server/.."
}
To your settings.json
In my case, it wasn't working because of server asking for new password when starting a session. What I did was to open a new default terminal (not VSC terminal but your OS default terminal like ZSH, CMD, and so on). And I used the ssh command to login. I logged in successfully and changed the password. Then I tried connecting with the new password and it worked because the server didn't asked for password change now.
Command:
ssh username#IP
Enter password and you'll get asked to change the password. Change the password and try connecting again with new password using SSH VSC extension.
If yout authorize by ssh-key - also check the value of User parameter in VsCode ssh config. User must have matching key in ~/.ssh/authorized_keys on remote host.
#Sachin's answer directed me in the right direction, VSCode needs permissions in order to create some files, but instead of giving 777 permissions to your home folder (which can be dangerous) you can just chown the user that wants to log in (the user for me was ubuntu):
sudo chown -R ubuntu /home
I also got the same issue and my workaround was to provide proper rights to the home or user folder, so vscode can create a remote folder and do the required installation on it.
Step 1: Add port to your config file :
Host hostname
Port 22
User username
Step 2 : Go to File->Prefrences ->Open settings.json fle
Search for lockfilesInTmp
and check the box next to that
Related
so I'm using Debian on my personal windows laptop.
I'm doing an assignment that entails using the syslog c library to print from my program when the statements run.
Here's the relevant code I used in my program:
#include <syslog.h>
(then in main)
openlog("slog",LOG_PID|LOG_CONS,LOG_USER);
syslog(LOG_INFO,"wuddup to u");
closelog();
There's no issues with the code running, but I can't find any file that has the log I printed.
on Debian, syslog is supposed to be saved in either in /var/log/syslog or /var/log/messages.
/var/log exists, but I don't have either of these folders inside it.
It doesn’t appear to be in a hidden file, so I don't imagine it's a permission problem.
syslog.conf which should be located in /etc also doesn’t exist.
However,
there is a reference to syslog in rsyslog.conf which does exist in /etc
a section within rsyslog.conf titled RULES starts like this:
#
# First some standard log files. Log by facility.
#
auth,authpriv.* /var/log/auth.log
*.*;auth,authpriv.none -/var/log/syslog
#cron.* /var/log/cron.log
daemon.* -/var/log/daemon.log
kern.* -/var/log/kern.log
lpr.* -/var/log/lpr.log
mail.* -/var/log/mail.log
user.* -/var/log/user.log
I haven’t figured out what the dashes or the rest of it could really mean.
Here’s the output for some possibly relevant commands I tried in the terminal:
dmesg
[ 0.007738] Microsoft 4.4.0-18362.1049-Microsoft 4.4.35
uname -a
Linux DESKTOP-KH1LDFG 4.4.0-18362-Microsoft #1049-Microsoft Thu Aug 14 12:01:00 PST 2020 x86_64 GNU/Linux
find /syslog
find: ‘/syslog’: No such file or directory
sudo apt-get install syslog
[sudo] password for sarah:
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package syslog
mkdir syslog (from /var/log)
mkdir: cannot create directory ‘syslog’: Permission denied
sudo service rsyslog start
[....] Starting enhanced syslogd: rsyslogdrsyslogd: set SO_TIMESTAMP failed on '/dev/log': Invalid argument [v8.1901.0]
rsyslogd: imklog: cannot open kernel log (/proc/kmsg): No such file or directory.
rsyslogd: activation of module imklog failed [v8.1901.0 try https://www.rsyslog.com/e/2145 ]
. ok
I ran
'sudo apt-get install --reinstall rsyslog'
followed by
'sudo apt-get install wsl'
and then I recompiled my program and ran it again. Then I checked the files in /var/log and syslog was there! with my log messages!! Thank you!
I'm trying to change the default data directory for MSSQL Server RC1 2017 after installation and setup in linux (Ubuntu-16.10).
I used the following command to set the default data directory. Then restarted the mssql server.
sudo /opt/mssql/bin/mssql-conf set filelocation.defaultdatadir /mnt/var/opt/mssql/data/
systemctl restart mssql-server.service
After this I tried to create a simple database "test"
sqlcmd -s localhost -U sa -P "someStrongPassword" -Q "CREATE DATABASE test"
The error returned is as follows:
MODIFY FILE encountered operating system error 31(A device attached to
the system is not functioning.) while attempting to expand the
physical file '/mnt/var/opt/mssql/data/test.mdf'.
CREATE DATABASE
failed. Some file names listed could not be created. Check related
errors.
The error log indicates an OS error:
/mnt/var/opt/mssql/data/test.mdf: Operating system error 31(A device
attached to the system is not functioning.) encountered.
I cannot mount the data directory by any means. The permissions to "/mnt" directory are set to 777 too. Changing the default data directory to any other folder, works perfectly fine. Is this a known or recent bug with mssql server?
Yes, there is an issue with using remote storage through NFS and SMB that came up in CTP 2.1 and was not yet fixed in RC1. See release notes: https://learn.microsoft.com/en-us/sql/linux/sql-server-linux-release-notes#a-idrc1-rc1-july-2017-a
The only workarounds are to use local storage or CTP 2.0. We are working on a fix. Release ETA is TBD ATM.
I created a new non-sudo user(user1) in vagrant(Ubuntu 12.04 OS), and added the insecure public key to the user1 authorised key file. In vagrant file, added the default user as "user1" :
config.ssh.default.username = "user1"
Now vagrant up is failing with following error message:
The following SSH command responded with a non-zero exit status.
Vagrant assumes that this means the command failed!
mkdir -p /vagrant
Stdout from the command:
Stderr from the command:
sudo: no tty present and no askpass program specified
Sorry, try again.
sudo: no tty present and no askpass program specified
Sorry, try again.
sudo: no tty present and no askpass program specified
Sorry, try again.
sudo: 3 incorrect password attempts
But if am setting the sudo user for default user, then vagrant up is successful.
Can anyone help me with the changes I need to do to enable vagrant up for non-sudo users.
Vagrant requires root/sudo permissions on the VM for almost all of it's operations; like configuring the networking, mounting shared folders, running provisioners, etc. So you wouldn't get very useful VM without sudo even if you managed to avoid it.
Note that you only need sudo access on the guest. Vagrant commands itself can (and should) be run as a non-root user on the host.
I'm trying to install postgres on a sun solaris sparc instance in my home directory.
Everything is fine except when I try to start postgres server, I get the following error
FATAL: "/home/reic/var/lib/pgsql/data" is not a valid data directory
DETAIL: File "/home/reic/var/lib/pgsql/data/PG_VERSION" is missing.
I used the command pg_ctl -l logfile start to start the server.
I have followed all the necessary steps for installation on sun solaris.
Any idea as to why is this happening ?
Solution:
All the necessary files are there in the PGDATA directory and I ran it as the same user which is trying to start the server. The problem is with the placement of env variables in the .bashrc instead of .bash_profile file. Apparently the customisations are not propagated to sub shells when the env variables are put in .bashrc.
My bad for not realising this! Thank you all....
I'm programming application using libpcap. when I debug the application in normal mode, pcap cannot get the network device. it seems that I have to debug the application in root.
How can I debug the application in root? I have the root password.
I think eclipse has such an option that can add root for the debugging application,but I don't know how to do it.
please help.
Enable your user to run gdb as root without being asked for any
password:
sudo visudo
Add the following line after all other rules:
<youruser> ALL=(root) NOPASSWD:/usr/bin/gdb
Create or modify a debug configuration in eclipse to run gdb as root
e.g. in Run > Debug Configurations > C/C++ Application > YourProject Debug:
change Debugger > Main > GDB debugger from gdb to sudo -u <youruser> gdb
Update (and warning!):
In his comment nategoose pointed out that this answer should come with a warning:
Enabling a user to use sudo for gdb like suggested in my answer in fact gives admin privileges to him/her which in many cases might be an undesired side effect. I therefore consider the answer appropriate in an environment where it's not assumed that the user would try to harm the system (e.g. it's your own personal computer or a virtual machine)
For a multi-(non-trusted)-user environment I think it might be a better idead to utilize unix' file capabilities to enable gdb to debug an application without the need of admin privileges
You can use gdbserver on localhost to attach a existing process, the following is the command line:
sudo gdbserver :<listening port> --attach <pid>
Or you can create a new process using gdbserver:
sudo gdbserver :<listening port> <process executable>
Then you can create a debugging configuration in Eclipse, in the debugger tab, the debugger item, select gdbserver, and input the listening port in the connection tab in the bellow.
Launch Eclipse with sudo (just for completeness: http://www.eclipse.org/forums/index.php?t=msg&goto=516838&)
Update: Follow xmoex solution. If you run Eclipse as root (ie. using sudo) your files will be root-owned... which you probably don't want.
Another solution is to grant you (or the gdb executable) the rights to make some pcap captures as mentioned here. With something like this :
setcap cap_net_raw,cap_net_admin=eip /usr/bin/gdb
you should be able to allow to capture packets to gdb without being root.
Here's how I did it:
Create a C/C++ Remote Application
On the target, make sure your sudo does not prompt for a PW
Look at Debug Configurations → Debugger → Port number
Edit Debug Configurations → Main → Commands to execute before application
Change to:
sudo gdbserver :<port number> <path to application>;exit #
This will basically run the gdbserver that would normally be executed by eclipse inside the sudo, the trailing '#' will keep the eclipse command from executing.
this question was asked a long time ago but if this will help to anybody I open a bug in bugzilla and this short thread solved the problem:
bugzilla bug
From the console in the directory with your executable:
sudo gdb ./my_program
If eclipse supports remote debugging then you could do that even though it is running locally.
From the console:
sudo gdbserver localhost:<port_number> ./my_program
And then tell Eclipse the address (localhost and the port number you chose).
Oh yeah, you said the reason you were doing this was because you were using libpcap, so you may not want to use remote debugging over TCP because you may end up capturing your debugging connection packets in addition to your other network traffic.
In that case you do your remote (but really local) debugging over a serial port. I have never done this on a local machine, but you could use two actual serial ports (attaching them though a null modem) or try using a psudoterminal:
sudo gdbserver /dev/ptmx ./my_program
This will create the psudo-terminal under /dev/pts/ but you'll have to figure out the name of it, and it might also create it with restrictive permissions. You can get around those. Unless you are running lots of terminal windows as root, it is not likely that you have many entries under /dev/pts that belong to root, so take note of the one that does after running the above command and then sudo chmod or sudo chown it to make it usable for your normal user and then tell your debugger to use that as your serial connection to your remote debugging target.
easiest way, try sudo ./eclipse, then debug as usual