This is the example of my coding that I want to send data to and it works. It's a dropdown element.
driver.FindElement(By.XPath("//ul[#id='select2-ctl00_ContentPlaceHolder1_FormEngine1_mf_18a384bd-8919-4aa7-b953-528b33a775dd_ddlGroup-results']/li[. ='" & roaData(3) & "']")).Click()
Here is the real problem I'm facing. Below here is the code that I want to send data to the element but it is not working. I want to send the data of the date but its not catching the data. The element is a calendar textbox.
driver.FindElement(By.XPath("//input[#id='ctl00_ContentPlaceHolder1_FormEngine1_ctl61_txtDate']")).SendKeys(UCase(Format(roaData(2), "dd MMMM yyyy")))
Any solution guys? Thank you :D
Without seeing the HTML of the target element nor what roaData(2) contains it's not very easy to tell what the issue is, but like most input elements the contents of a textbox is usually located in the value attribute. So instead of SendKeys() I recommend you use setAttribute():
driver.FindElement(By.XPath("//input[#id='ctl00_ContentPlaceHolder1_FormEngine1_ctl61_txtDate']")).setAttribute("value", roaData(2).ToString("dd MMMM yyyy").ToUpper())
Also note that UCase and Format are old functions from the VB6 era, existing only to provide backwards compatibility with that language. I replaced them with the .NET variants DateTime.ToString() (assuming roaData(2) is actually of type Date) and String.ToUpper().
Related
I inherited a legacy website written in old zul and have to add new datebox component for birthday datepicker.
Have added a constraint to accept dates before a given date but that triggers an error alertbox from start as the date presented/selected by default on the datepicker is today.
I wouldn't want to use a workaround but to all due respect it seems like this is something over the top feature I'm looking for in zk's reality:
The main showcase for zul does include a birthday datebox, but pretty lame as it doesn't contain any constrain on age.
There is zk fiddler to show how the before constrain works, but that just proves my point that it doesn't select the first proper date for default date at least, if there is no clean way of setting it.
There is forum post that proposes a workaround to set the default year, so Zk is most probably incapable of doing this without a workaround.
There is an open ZK Jira issue from 2017 that addresses somewhat this issue, with a proposed solution pretty much the same as the workaround mentioned in the above point - so the hope is kinda lost, have to go on the workaround route.
I did try that workaround (after the forum post, as that has default year), but the workaround doesn't work for me. It does execute the
this.setValue(initialDate);
And I see that the value is set into the datebox's _pop/_value and _pop/_end nodes but no difference is visible on the datepicker box, still today is preselected altough it is greyed out - so no effect.
Still, when I try it in a fiddle with version 6.5.8.1, the oldest engine that exists, it does work, but not locally with v5.0.11.
In the buglist for this version there is no mention of datebox. Tried to look into to some bugs that might be interfering but turns out it was just another episode of me wasting time with this.
Tried in the 5.0.11 sandbox and it doesnt work with that version. The structure of how I use it is imitated in the linked fiddler. Hints on a workaround that works on this version?
ZK 5.0.11 is a bit on the older side currently, so it might not accept exactly the same overrides as later versions. If I understand the issue correctly, it boils down to either
1 - setting a value before Datebox is rendered to have a "initial date" opened in calendar.
I'd say that's the easy way out, since you can use either composing or databinding to set the value of the datebox during page rendering. Here's a small sample using databinding and zscripts, but the same logic should apply from composer with setValue(). You mentioned that this doesn't work for you locally with 5.0.11 though. Can you share the code that you are using for this? Sample code here in fiddle I can run it on local 5.0.11, and it set the date before popup is opened.
or
2 - setting an initial date (which doesn't affect the selected value) but would be the target for the opened calendar.
This is not a default ZK 5 behavior for datebox. If you want that effect, you would need to customize it using an override script. Simplest way in can think of in ZK 5 is to use the open event of the datebox popup here's an example of what it would look like (package in a script tag in a single page for the example, would use a global js file for real deployement) example here
I would like to ask you, how can I convert decimal number to data in angularJS?
source:
20150911141804
expected:
2015-09-11
I need format this source number inside cellTemplate in ui-grid.
Thanks
If you need to display something you're getting from a data source, like a JSON file or a $http.get(...), then using a filter is the way to go, but I suggest you build a custom one, seeing your format is quite uncommon.
If you need to parse a value entered by a user in, say, an input text, then the right way is to use a custom parser.
If you want to know more you can read the official docs for filters and parsers.
use
<span>{{1288323623006 | date:'yyyy-MM-dd'}}</span><br>
refer to
https://docs.angularjs.org/api/ng/filter/date
Your date has a very strange format.
If you cannot change it (to an UNIX timestamp for example), consider converting your date (as a String) to something like:
20150911141804 => '2015-09-11'
And then create a new date from this String :
var date = new Date('2015-09-11');
Once you have a real Date object, you can format it using angular's native date filter or momentjs.
Is it possible to add input type as date in angular formly.? I was trying it using type:date but it is not defined in it. So, how to get it?
I recommend you take a look at the resources at http://learn.angular-formly.com/
Specifically, what you're looking for is creating Custom Templates (video, example). There's even an example that uses UI Datepicker.
I have one drupal content type. there is one image field, the configuration is:
content type field setting
It works fine. I can upload multi image to that content type. The only problem is that, the uploaded image is themed in table format.
uploaded results
How can i change the output format other than table? I have searched for the whole day, still can not find the answer :(
What I have seen from your given images, you have an image field in your content type. Also I am not sure that in which way you are showing all the images on the front end. This could be done in several ways. One of them is using 'Views'.
Views
So if you are collecting all the images into a view creating a page or block, then you can easily change the showing format. Like you can use the table format and also list format. And on the front end you could be able have a non-tabular format.
Tpl files
On the other hand, if you are using special node tpl then you have to format the html properly so that they won't come in a tabular format.
I will personally suggest you to use the views to avoid unnecessary problems and also you can also specify the view specific tpl file.
Cheers :) keep Drupalizing :)
I am trying to figure out how to make a hyperlink in a Livecycle Form which points to a URL which will change on different days that the form is rendered. For example on one day I might want the hyperlink to point to:
mywebsite/mypage?option=XXX
and on another day I want it to point to:
mywebsite/mypage?option=YYY
The XXX and YYY can be passed into the form's data pretty easily as XML, but I just don't know how to make it so that the hyperlink is changed to correspond to this.
Any suggestions?
This can be accomplished with JavaScript in LiveCycle Designer. The following script, placed on the Form's docReady event will let you dynamically change the URL of a text object.
form1::docReady - (JavaScript, client)
// If this code is running on the server, you don't want it to run any code
// that might force a relayout, or you could get stuck in an infinite loop
if (xfa.host.name != "XFAPresentationAgent") {
// You would load the URL that you want into this variable, based on
// whatever XML data is being passed into your form
var sURL = "www.stackoverflow.com"; // mywebsite/mypage?option=xxx
// URLs are encoded in XHTML. In order to change the URL, you need
// to create the right XHTML string and push it into the Text object's
// <value> node. This is a super simple XHTML shell for this purpose.
// You could add all sorts of markup to make your hyperlink look pretty
var sRichText = "<body><p>Foo</p></body>";
// Assuming you have a text object called "Text1" on the form, this
// call will push the rich text into the node. Note that this call
// will force a re-layout of the form
this.resolveNode("Text1").value.exData.loadXML(sRichText, false, true);
}
There are a couple of caveats: URLs in Acrobat are only supported in Acrobat 9.0 and later. So if someone using an older version of Acrobat opens your form, the URLs won't work.
Also, as you can see from the "if (xfa.host.name !=...)" line, this code won't run properly if the form is being generated on the server, because forcing a re-layout of a form during docReady can cause problems on certain older versions of the LiveCycle server. If you do need to run this script on the server, you should probably pick a different event then form::docReady.
I a number of complaints from users in WorkSpace that clicking links opened them in the same tab so they lost their WorkSpace form, and there's no option to change that in Designer 11. I think the solution I came up with for that would work for you too.
I made buttons with no border and no background, and in their click event have this line (in Javascript, run at client)
app.launchURL("http:/stackoverflow.com/", true);
It would be easy to add some logic to choose the right URL based on the day and it doesn't cause any form re-rendering.
In some spots where the hyperlink is in line with other text, I leave the text of the link blue and underlined but with no hyperlink, and just place the button (no background, no border, no caption) over it. Does require positioned and not flowed subforms for that to work, so depending on your layout it could get a little clunky.
Wow, just realized I am super late to the party. Well, for anyone using ES4 facing a similar problem . . .
Ended up using a 3rd party component to manipulate the PDF's hyperlinks...wish there was a better solution as this one costs about $1000.