How do you install boto3 on Ubuntu 18.04?
I tried this:
# pip install boto3
Command 'pip' not found, but can be installed with:
apt install python-pip
# apt install python-pip
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package python-pip
#
Partial answer found at https://askubuntu.com/questions/672808/sudo-apt-get-install-python-pip-is-failing
sudo apt-get install software-properties-common
sudo apt-add-repository universe
sudo apt-get update
sudo apt-get install python3-pip
Do not run pip install --upgrade pip, otherwise the following steps are also needed:
from https://github.com/pypa/pip/issues/5240
vi /usr/bin/pip3
change the broken from pip import main import to
from pip._internal import main
and then finally
pip3 install boto3
it's quite simple, just install it from the terminal
apt install python-boto3
The log you posted informs you that the commands pip and python-pip are not already installed. So, if you still use python 2 (do not recommend), you can install pip or python-pip
sudo apt-get install pip
sudo apt-get install python-pip
and then install boto3: sudo pip install boto3.
Otherwise, if you already use Python 3, you can just install pip3 or python3-pip
sudo apt-get install pip3
sudo apt-get install python3-pip
and then install boto3: sudo pip3 install boto3
Related
Actually, with the new release of Xdebug 3, I have to investigate more why its not working. I don't have much time for that.
The problem was I had this command for vagrant box creation but it does not have any version number.
sudo apt-get install -y php-xdebug
Is there a way to specify the version number to install version 2.9.3
this worked for me. Thank you #LazyOne for help. :-)
sudo apt-get install -y php-pear php7.3-dev
sudo apt install -y php7.3-xdebug
sudo pecl install xdebug-2.9.3
I am trying to install R version 4.0.2 on ubuntu 18.04 but it shows this message:
The following packages have unmet dependencies:
r-base : Depends: r-base-core (>= 4.0.3-1.2004.0) but it is not going to be installed
Depends: r-recommended (= 4.0.3-1.2004.0) but it is not going to be installed
Recommends: r-base-html but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
You have to remove problematic PPA (it does no publish packages for 18.04 LTS - bionic) first with:
sudo add-apt-repository -r ppa:grass/grass-stable
and then update your package lists
sudo apt-get update
and install new updates with their dependencies by
sudo apt-get dist-upgrade
You have added R 3.5 repository (see bionic-cran35 in its URL), instead of needed R 4.0 (bionic-cran40). You have to remove wrong repository with
sudo add-apt-repository -r 'deb https://cloud.r-project.org/bin/linux/ubuntu bionic-cran35/'
and then add correct one:
sudo add-apt-repository 'deb https://cloud.r-project.org/bin/linux/ubuntu bionic-cran40/'
sudo apt-get dist-upgrade
sudo apt-get install r-base r-base-core r-recommended
In order to install the last R version in Ubuntu LTS >= 16.04. (amongst other 18.04) follow the instructions at CRAN. If you have already installed the distro version of R remove it with the package manager.
Here, I made a summarized version of the instructions.
Note that this instructions are valid for any LTS. I tried them with 18.04. and worked smoothly.
update indices
sudo apt update -qq
install two helper packages we need
sudo apt install --no-install-recommends software-properties-common dirmngr
Add the signing key (by Michael Rutter) for these repos
wget -qO- https://cloud.r-project.org/bin/linux/ubuntu/marutter_pubkey.asc | sudo tee -a /etc/apt/trusted.gpg.d/cran_ubuntu_key.asc
Add the R 4.0 repo from CRAN
sudo add-apt-repository "deb https://cloud.r-project.org/bin/linux/ubuntu $(lsb_release -cs)-cran40/"
Install R and its dependences
sudo apt install --no-install-recommends r-base
Ready, you can execute R by just entering R on your terminal.
Does anyone successfully install pdo_sqlsrv in ubuntu php 7.2.9 environment? I only see sqlsrv on phpinfo(), pdo_sqlsrv always installed fail. Thank you very much.
I found an afternoon and finally found a solution.
The file 30-pdo_sqlsrv.ini in /etc/php/7.2/cli/conf.d ,
copy to /etc/php/7.2/apache2 , it work !!
curl https://packages.microsoft.com/config/ubuntu/18.04/prod.list | sudo tee /etc/apt/sources.list.d/msprod.list
sudo apt-get update
sudo ACCEPT_EULA=Y apt-get -y install msodbcsql17 mssql-tools
sudo apt-get -y install unixodbc-dev
sudo apt-get -y install gcc g++ make autoconf libc-dev pkg-config
sudo apt-get install php-pear php7.2-dev
sudo pecl install sqlsrv
sudo pecl install pdo_sqlsrv
printf "; priority=20\nextension=sqlsrv.so\n" > /etc/php/7.2/mods-available/sqlsrv.ini
printf "; priority=30\nextension=pdo_sqlsrv.so\n" > /etc/php/7.2/mods-available/pdo_sqlsrv.ini
phpenmod -v 7.2 sqlsrv pdo_sqlsrv
a2enmod mpm_prefork
a2enmod php7.2
service apache2 restart
I am trying to create a docker image that has the following:
php7
apache2
git
xdebug
In my dockerfile I have the official php7 with apache image as the base.
I can run apt-get update.
I have installed git successfully.
But when I run apt-get install -y php-xdebug I get the following:
E: Unable to locate package php-debug
Dockerfile:
FROM php:7.0-apache
RUN apt-get update && apt-get install -y git
RUN apt-get install -y php-xdebug
sudo apt-get build-dep octave is not working. The error message is "E: Build-Depends dependency for octave cannot be satisfied because the package automake cannot be found". I have modified the /etc/apt/sources.list file with deb replaced by deb-src. Even when I try sudo apt-get install octave, an error is displayed that the package is not located.
Octave packages http://wiki.octave.org/Octave_for_Debian_systems
Many Octave packages are also distributed by your Linux distribution. These are tested to work the best with your Octave version. For example:
sudo apt-get install octave-control octave-image octave-io octave-optim octave-signal octave-statistics
Octave's Personal Package Archive (PPA) for Ubuntu
sudo apt-add-repository ppa:octave/stable
sudo apt-get update
sudo apt-get install octave
Or
sudo apt-get autoclean
You can also Try with
wget ftp://ftp.gnu.org/gnu/octave/octave-4.0.0.tar.bz2
tar -xvf octave-4.0.0.tar.bz2
cd octave-4.0.0
./configure
make
sudo make install
More version are available at ftp://ftp.gnu.org/gnu/octave
Or
Adding a line to your /etc/apt/sources.list
amd64: http://packages.ubuntu.com/trusty/amd64/libgraphicsmagick3/filelist
i386: http://packages.ubuntu.com/trusty/i386/libgraphicsmagick3/download