I am using Linux LGs and I want to use syslog / rsyslog to dump the custom logs from my loadrunner vugen script. For that I tried to run a linux command by using the loadrunner function int system( const char *string); but it's not working for me. Do you have any alternative for this?
For your ready reference please check the custom function which I have used for using the syslog / rsyslog.
lr_syslog(char *log)
{
lr_param_sprintf("PAR_syslog", lr_eval_string("./syslog %s"), log );
system(lr_eval_string("{PAR_syslog}"));
return 0;
}
and syslog.c is as follows
#include <syslog.h>
void main(int argc, char *argv[])
{
openlog ("loadrunner", LOG_CONS | LOG_PID | LOG_NDELAY, LOG_LOCAL1);
syslog (LOG_INFO, "customlog - %s", argv[1] );
closelog ();
}
Thanks in advance.
May I suggest as an alternative the use or lr_output_message() which will be directed to the output window on your controller.
If you wish to post process these messages in logparser, elk, or splunk you can then export the messages and import them into your favored log analysis tool..... or you can just use the features of Microsoft Access to run queries against the messages using standard SQL.
I suggest that you could collect system log while perform testing. After tested, you could open test result by LR Analysis and import system log by Import Data function.
Then you could create Correlation between Response Time and system resource in LR Analysis. And it will help you to analyze performance.
From this URL，you could find the detailed usage of Import Data.
Related
I would like to get a list of the wireless networks available. Ideally this would be via some C call, but I don't mind if I have to kludge it with a system call. Even better if the required C call or program doesn't require some exotic 3rd party package.
The internet seems to suggest I use sudo iwlist <interface> scan which does seem to do the trick from the command line, but I'd rather not require root permissions. I only want to see the basics, not change anything.
It's pretty easy to do a scan in the command line. The man pages are your friend here (check out iwconfig and iwlist). But using the C interface is a little more difficult so I'll focus on that.
First of all, as other people have mentioned, definitely download out the wireless tools source code. All the documentation for the programming interface is in the .c files. As far as I can tell, there is no web documentation for the api. However, the source code is pretty easy to read through. You pretty much only need iwlib.h and iwlib.c for this question.
While you can use iw_set_ext and iw_get_ext, the libiw implements a basic scanning function iw_scan, from which you can extract most of the information that you need.
Here is a simple program to get the ESSID for all available wireless networks. Compile with -liw and run with sudo.
#include <stdio.h>
#include <time.h>
#include <iwlib.h>
int main(void) {
wireless_scan_head head;
wireless_scan *result;
iwrange range;
int sock;
/* Open socket to kernel */
sock = iw_sockets_open();
/* Get some metadata to use for scanning */
if (iw_get_range_info(sock, "wlan0", &range) < 0) {
printf("Error during iw_get_range_info. Aborting.\n");
exit(2);
}
/* Perform the scan */
if (iw_scan(sock, "wlan0", range.we_version_compiled, &head) < 0) {
printf("Error during iw_scan. Aborting.\n");
exit(2);
}
/* Traverse the results */
result = head.result;
while (NULL != result) {
printf("%s\n", result->b.essid);
result = result->next;
}
exit(0);
}
DISCLAIMER: This is just a demonstration program. It's possible for some results to not have an essid. In addition, this assumes your wireless interface is "wlan0". You get the idea.
Read the iwlib source code!
The Wireless Tools package -- of which iwlist is a part -- also contains a Wireless Tools Helper Library. You need to include iwlib.h and link with libiw.a (i.e. add -liw). Then look up the documentation for the iw_set_ext function. The SIOCSIWSCAN parameter will be of most use. For an example of how to use this interface, take a look at the KWifiManager source in the KDE library (see: Interface_wireless_wirelessextensions::get_available_networks method). Alternatively, you can also download the Wireless Tools source code and take a look at how the iwlib iw_set_ext function is also used for scanning in iwlist.c.
As for privileges, I imagine the process will need to run as root to perform the scan. I'd love to know if this could be done otherwise as well.
Since you are using Ubuntu 8.04 the libiw-dev package should be of use.
You can use nmcli which does not require root permissions or name of WIFI interface.
nmcli -t -f ssid dev wifi
Hi I am new to the linux environment. I am trying to create daemon process.
#include<stdio.h>
int main()
{
int a=10,b=10,c;
c=sum(a,b);
printf("%d",c);
return (0);
}
int sum(int a,int b)
{
return a+b;
}
I want to create daemon process of it. May i know how can do this? Any help would be appreciated. Thank you.
A daemon generally doesn't use its standard input and output streams, so it is unclear how your program could be run as a daemon. And a daemon program usually don't have any terminal, so it cannot use clrscr. Read also the tty demystified page, and also daemon(7).
I recommend reading some good introduction to Linux programming, like the old freely downloadable ALP (or something newer). We can't explain all of it here, and you need to read an entire book. See also intro(2) and syscalls(2).
I also recommend reading more about OSes, e.g. the freely available Operating Systems: Three Easy Pieces textbook.
You could use the daemon(3) function in your C program to run it as a daemon (but then, you are likely to not have any input and output). You may want to log messages using syslog(3).
You might consider job control facilities of your shell. You could run your program in the background (e.g. type myprog myarg & in your interactive shell). You could use the batch command. However neither background processes nor batch jobs are technically daemons.
Perhaps you want to code some ONC-RPC or JSONRPC or Web API server and client. You'll find libraries for that. See also pipe(7), socket(7)
(take several days or several weeks to read much more)
First find what are the properties of daemon process, as of my knowledge a daemon process have these properties:
Should not have any parent (it itself should be parent)
Process itself is a session leader.
Environment change to root.
File mode creating mask should be zero.
No controlling terminal.
All terminal should be removed
Should not be un-mounted .
Implement the code by considering above properties which is
int i=0;
int main()
{
int pid;
pid=fork();
if(pid!=0) {
/** you can add your task here , whatever you want to run in background **/
exit(0);
}
else
{
setsid();//setting sessions
chdir("/");//root.. should'nt beunmounted
umask(0);
close(0);//all terminal are removed
close(1);
close(2);
while(1)
{
printf("i = %d \n",i);
i++;
}
}
return 0;
}
or you can go through man page of daemon()
int daemon(int nochdir, int noclose);
I hope it helps.
Instead of writing the code to make the C program a daemon I would go with an already mature tool like supervisor:
http://supervisord.org/
I think this below will work
screen cmd arg1 arg2
You can also try
nohup cmd arg1
I am trying to get some information from the output of ipmi-sensors, such as CPU_TEMP, CPU_FAN, ... and save the values for another API to use. A daemon will send command from remote to gather all the hosts' hardware status.
I'm tracing the code of ipmi-sensors.c and relative files, such as ipmi-sensors-simple-output.c and ipmi-sensors-detail-output.c. I find that the ipmi-sensors default output to stdout. In the main(), ipmi-sensors call ipmi_sensors_argp_parse first,
ipmi_sensors_argp_parse (/*argc, argv, */&cmd_args);
I'd like to get ipmi-sensors data from an API, I do not use the argc, argv, I mark out argc, argv and modify the content of function call for this purpose.
Then main() call another func pstdout_setup to setup the stdout for output
if ((hosts_count = pstdout_setup (&(prog_data.args->common_args.hostname),
&(prog_data.args->common_args))) < 0)
return (EXIT_FAILURE);
and launch it
if ((rv = pstdout_launch (prog_data.args->common_args.hostname,
_ipmi_sensors,
&prog_data)) < 0)
Does FreeIPMI have any API call in FreeIPMI to do ipmi-sensors's task? Or do I need to redirect the stdout to a stream or file using fork and dup2? Or do I need to rewrite the all part of ipmi-sensors?
Thanks for your help.
FreeIPMI maintainer here. I believe the API you are looking for is "libipmimonitoring", it does about 90% of what is in ipmi-sensors.
I have been reading about how to keep error/warning logs of a C program on Linux environment. Is it better to write the errno to a file as it is done here or is it better to use syslog or setlogmask system calls or another method? I would appreciate an answer with an example code.
I would strongly suggest using syslog for logging errors as its more standard way of logging.
you can look at the example implemenation here (bio3d.colorado.edu/tor/sadocs/misc/syslog.html)
Also unix network programming book by richard stevens also contains good explanation of using syslog
The above link no longer works - try this one here:
https://www.gnu.org/software/libc/manual/html_node/Syslog-Example.html#Syslog-Example
....which contains the following example:
#include <syslog.h>
setlogmask (LOG_UPTO (LOG_NOTICE));
openlog ("exampleprog", LOG_CONS | LOG_PID | LOG_NDELAY, LOG_LOCAL1);
syslog (LOG_NOTICE, "Program started by User %d", getuid ());
syslog (LOG_INFO, "A tree falls in a forest");
closelog ();
I wrote a simple test application to log something in a log file. I am using linux mint and after the application executes I try to view the log using this command:
tail -n 100 /var/log/messages
but the file messages does not exist neither tested or something. Below you can find my code. Maybe I am doing something wrong, the file isn't stored there or I need to enable logging in linux mint.
#include <stdio.h>
#include <stdlib.h>
#include <syslog.h>
void init_log()
{
setlogmask(LOG_UPTO(LOG_NOTICE));
openlog("testd",LOG_CONS | LOG_PID | LOG_NDELAY, LOG_LOCAL1);
}
int main(void) {
init_log();
printf("Session started!");
syslog(LOG_NOTICE, "Session started!!");
closelog();
return EXIT_SUCCESS;
}
On my Ubuntu machine, I can see the output at /var/log/syslog.
On a RHEL/CentOS machine, the output is found in /var/log/messages.
This is controlled by the rsyslog service, so if this is disabled for some reason you may need to start it with systemctl start rsyslog.
As noted by others, your syslog() output would be logged by the /var/log/syslog file.
You can see system, user, and other logs at /var/log.
For more details: here's an interesting link.
Default log location (rhel) are
General messages:
/var/log/messages
Authentication messages:
/var/log/secure
Mail events:
/var/log/maillog
Check your /etc/syslog.conf or /etc/syslog-ng.conf (it depends on which of syslog facility you have installed)
Example:
$ cat /etc/syslog.conf
# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
*.info;mail.none;authpriv.none /var/log/messages
# The authpriv file has restricted access.
authpriv.* /var/log/secure
# Log all the mail messages in one place.
mail.* /var/log/maillog
#For a start, use this simplified approach.
*.* /var/log/messages
In addition to the accepted answer, it is useful to know the following ...
Each of those functions should have manual pages associated with them.
If you run man -k syslog (a keyword search of man pages) you will get a list of man pages that refer to, or are about syslog
$ man -k syslog
logger (1) - a shell command interface to the syslog(3) system l...
rsyslog.conf (5) - rsyslogd(8) configuration file
rsyslogd (8) - reliable and extended syslogd
syslog (2) - read and/or clear kernel message ring buffer; set c...
syslog (3) - send messages to the system logger
vsyslog (3) - send messages to the system logger
You need to understand the manual sections in order to delve further.
Here's an excerpt from the man page for man, that explains man page sections :
The table below shows the section numbers of the manual followed by
the types of pages they contain.
1 Executable programs or shell commands
2 System calls (functions provided by the kernel)
3 Library calls (functions within program libraries)
4 Special files (usually found in /dev)
5 File formats and conventions eg /etc/passwd
6 Games
7 Miscellaneous (including macro packages and conven‐
tions), e.g. man(7), groff(7)
8 System administration commands (usually only for root)
9 Kernel routines [Non standard]
To read the above run
$man man
So, if you run man 3 syslog you get a full manual page for the syslog function that you called in your code.
SYSLOG(3) Linux Programmer's Manual SYSLOG(3)
NAME
closelog, openlog, syslog, vsyslog - send messages to the system
logger
SYNOPSIS
#include <syslog.h>
void openlog(const char *ident, int option, int facility);
void syslog(int priority, const char *format, ...);
void closelog(void);
#include <stdarg.h>
void vsyslog(int priority, const char *format, va_list ap);
Not a direct answer but hopefully you will find this useful.
You have to tell the system what information to log and where to put the info. Logging is configured in the /etc/rsyslog.conf file, then restart rsyslog to load the new config. The default logging rules are usually in a /etc/rsyslog.d/50-default.conf file.
syslog() generates a log message, which will be distributed by syslogd.
The file to configure syslogd is /etc/syslog.conf.
This file will tell your where the messages are logged.
How to change options in this file ?
Here you go
http://www.bo.infn.it/alice/alice-doc/mll-doc/duix/admgde/node74.html
Logging is very configurable in Linux, and you might want to look into your /etc/syslog.conf (or perhaps under /etc/rsyslog.d/). Details depend upon the logging subsystem, and the distribution.
Look also into files under /var/log/ (and perhaps run dmesg for kernel logs).
I'm running Ubuntu under WSL(Windows Subsystem for Linux) and systemctl start rsyslog didn't work for me.
So what I did is this:
$ service rsyslog start
Now syslog file will appear at /var/log/