I want to run Z/IP Gateway on Ubuntu Linux. I have followed all the steps given in the following site:
https://www.silabs.com/support/getting-started/mesh-networking/z-wave/controller-kit
In the "Building the Documentation" section I want to install the 64-Bit Ubuntu but I am receiving the following ERROR("
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package lib-dev:i386
I don't understand where to locate the package.
Best Regards,
Raja
It sounds like you're running a 32-bit system. Install libc6-dev and that should resolve the issue.
Related
sudo apt-get install liblog4cxx10-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package liblog4cxx10-dev
An old project needs liblog4cxx10-dev to be installed, but apt-get can't find it. Dose it deprecated in Ubuntu18.04? Is there any work around ways?
The package is liblog4cxx-dev and the corresponding binary is liblog4cxx10v5 - both are version 0.10
I have Ubuntu 18.04, not installed directly but upgraded from 16.10, I haven't used Steam in a while on this computer (maybe since before the 18.04 upgrade, don't remember) which led to problems, and after a while of trawling the Internet for possible solutions, I had to admit defeat.
I tried the sudo apt-get autoremove/update/upgrade/dist-upgrade series, and it didn't do anything.
EDIT: I have also done sudo apt-get clean, and sudo apt-get install -f.
I also tried a full uninstall via deleting .steam/ and .local/share/Steam/ .
I am aware of the method of simply manually installing the packages, but that isn't working for me, either. Observe:
$ sudo apt install steam
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
steam:i386 : Depends: libgl1-mesa-dri:i386 (>= 17.3) but it is not going to be installed or
libtxc-dxtn0:i386
Depends: libgl1-mesa-dri:i386 but it is not going to be installed
Depends: libgl1-mesa-glx:i386 but it is not going to be installed
Recommends: nvidia-driver-libs-i386:i386 but it is not installable
E: Unable to correct problems, you have held broken packages.
From this, I tried to run the following commands:
$ sudo apt install libgl1-mesa-dri:i386
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libgl1-mesa-dri:i386 : Depends: libllvm8:i386 (>= 1:8~svn298832-1~) but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
$ sudo apt install libgl1-mesa-dri:i386 libllvm8:i386
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libllvm8:i386 : Depends: libatomic1:i386 (>= 4.8) but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
$ sudo apt install libgl1-mesa-dri:i386 libllvm8:i386 libatomic1:i386
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
debhelper : Depends: dh-autoreconf (>= 17~) but it is not going to be installed
libatomic1:i386 : Depends: gcc-8-base:i386 (= 8.3.0-6ubuntu1~18.04.1) but 8.3.0-16ubuntu3~16.04 is to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
At this point, I don't really know what to do. Especially in response to the line "but 8.3.0-16ubuntu3~16.04 is to be installed". I have Ubuntu 18.04. Why is something from 16.04 going to be installed?
One more try for completion's sake:
$ sudo apt install libgl1-mesa-dri:i386 libllvm8:i386 libatomic1:i386 dh-autoreconf gcc-8-base:i386
Reading package lists... Done
Building dependency tree
Reading state information... Done
gcc-8-base:i386 is already the newest version (8.3.0-16ubuntu3~16.04).
gcc-8-base:i386 set to manually installed.
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
dh-autoreconf : Depends: libtool (>= 2.4.2) but it is not going to be installed
libatomic1:i386 : Depends: gcc-8-base:i386 (= 8.3.0-6ubuntu1~18.04.1) but 8.3.0-16ubuntu3~16.04 is to be installed
E: Unable to correct problems, you have held broken packages.
And including gcc-8-base:i386 does nothing.
How did I break my install of Ubuntu?
Tried all top Google solutions. None of them worked for me.
Came across this answer that described how we can reset broken packages.
Take a backup of the file /var/lib/dpkg/status first. Then erase all the contents of that file.
Then run sudo apt install steam. It may prompt you if there are files that already exist and will be overwritten. Best that you check for the differences in the file's contents. In my case, I decided to use the one from the package maintainers itself instead of my own.
Steam installed smoothly. Did not get any unmet dependencies error.
When I tried to start steam, I got an error about glxchoosevisual failed. For this, I then had to install libnvidia-gl-450:i386 library. Note that in my case, my nvidia driver version was 450 so used that. You need to use your version here. That's it! Steam then launched fine.
Sharing it here in case it helps somebody.
Check if you have enabled restricted and universe repositories.
You can also run:
This cleans the local repo from packages so they are going to be downloaded again
apt-get clean
This is reinstalling broken packages
apt-get -f install
Hello guys. Can someone help me about this one? I cant install mongodb because of dependency problem. I already tried updating my linux mint terminal.
dpkg: dependency problems prevent configuration of mongodb-enterprise-server:
mongodb-enterprise-server depends on libcurl3 (>= 7.16.2); however:
Package libcurl3 is not installed.
mongodb-enterprise-server depends on snmp; however:
Package snmp is not installed.
Installing via dpkg -i mongodb.deb will not include additional package dependencies. You should be able to fix your installation by following up with sudo apt --fix-broken install.
Unless you have strong reasons to avoid the standard process I would recommend following the tutorial to Install MongoDB Enterprise by adding the appropriate repo definitions. Adding the normal package repo will also make it easier for you to update to newer minor releases of MongoDB 4.0.x.
The goal is to install Microsoft Driver for SQL Server on Ubuntu 18.04 to write scripts using python package pyodbc.
I make steps according this article. The problem is when I run command sudo ACCEPT_EULA=Y apt-get install msodbcsql17 then I recieve next error message:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
msodbcsql17 : Depends: unixodbc (>= 2.3.1) but it is not installable
E: Unable to correct problems, you have held broken packages.
Only relevant discussion of this problem is here. But I have already tried all recomendations:
Remove all relevant packages
Use clean system
Build unixodbc manually
Nothing helped me. Does anyone met same problem or have guide how to install this driver on clean Ubuntu 18.04 server system?
I created a ROS workspace following the Wiki page from ROS. I also created a package using catkin_create_pkg under the workspace I just created.
Then, following the steps in ROS Wiki to build the package using catkin_make, after the package is built, I insert the command rospack find packagename, and my package is not found anymore.
Can anyone help me on this?
Have you followed this basic tutorial? You have to create the package in your workspace and have set properly your Bash file (in your home directory).
To permanently set your system, add these lines
# ROS settings
source <your_workspace_path>/catkin/devel/setup.bash
at the end of your ~/.bashrc. Then, restart the terminal, and retry. Please, be sure to modify these lines with your actual information, where I've put <your_workspace_path> (depends on where you have installed ROS and its workspace on your PC).
If this does not solve the problem, try rospack profile before rospack find <your_package_name>.