I am in the process of doing export and import with postgres database.
I had used the following command to take the backup of postgres db
C:\dirs> pg_dump -U postgres -p 15432 -W -F t cgate-next-demo > .\dbexport_10th_February_2022.tar
Password:*****
I have unzipped dbexport_10th_February_2022.tar file and proceeded with database import. As a initial step, I had dropped the database.
#drop database if exists "cgate-next-demo";
And I had recreated the empty database.
#create database "cgate-next-demo";
In order to do this, I have logged in to psql once,
C:\dirs> psql -U postgres -p 15432
Password for user postgres:*****
postgres=#
For database import I have used the following command.
C:\dirs> psql -U postgres -p 15432 -d cgate-next-demo <restore.sql
While I do that I have got the following error. I took this excerpt from console logs.
ERROR: could not open file "$$PATH$$/6052.dat" for reading: No such
file or directory HINT: COPY FROM instructs the PostgreSQL server
process to read a file. You may want a client-side facility such as
psql's \copy.
Can someone guide on what would've caused this issue.
You are doing this in the wrong fashion. Rather than unpacking the archive, pass it as argument to pg_restore. That will do everything for you.
i received many .dat.gz files from a pg_dump at a postgres database.
i would like to convert it to a .sqli file to import it in a software like dbeaver.
Is there a way to do this? Unfortunately I can't find the answer by googling.
thanks
Take the below as suggestions and test before using in production.
At a guess is was some form of pg_dump -Fd ... per pg_dump.
If that is the case and all the files are there you can either do:
pg_restore -f dump.sql /dat_dir
which will create a plain version of the dump or:
pg_restore -d some_db -C /dat_dir
which will restore directly. In this case using -d to connect and then -C to create the database that was dumped.
For more information see pg_restore
My computer runs Ubuntu 14.04 with postgreSQL 9.3
I would like to restore a large PSQL database called bigdb on my computer from a dump file (dump file size = 2.3GB).
The dump file comes from a different computer, I currently don't have any prior version of the database on my computer.
I created an empty database called testdb in which I'd like to "write" bigdb
I tried the command:
$pg_restore -C -d testdb dump.dmp
It gave me around 300 errors of this type:
pg_restore: [archiver (db)] Error from TOC entry 15475; 0 25342 TABLE DATA tb_italmaj jturf
pg_restore: [archiver (db)] could not execute query: ERROR: relation "tb_italmaj" does not exist
Command was: COPY tb_italmaj (id_mvtmaj, file_name, file_dh, pgdone, pgdonedh, pgfonctrue, pgerrcode, pgerrmess, pgrowdata) FROM stdin;
At the end, testdb is still empty.
It seems like testdb needs to have the same "structure" (tables,...) as bigdb, but I thought the parameter "-C" would create the database.
I also tried to extract the dump in a plain txt file dump.sql and I tried restoring it with the command:
$psql -v ON_ERROR_STOP=1 testdb < dump.sql
This error popped out immediately:
ERROR: relation "id_tab_eed__texte_seq" does not exist
Likewise it seems that the relations from bigdb need to be created before restoring it and I can't do this.
The only command that executed properly was:
$pg_restore -C dump.dmp
But in this case, no database was created on my computer.
I have been struggling with this issue for several hours. Can someone help me ?
Thanks in advance.
PS: This is my first post and I am not a native english speaker, I hope I was clear. If not, feel free to ask for complementary information.
I'm working on PostgreSQL 8.4 and I'd like to do backup and restore (from Ubuntu 11.10 to Ubuntu 12.4)
I want to include all partitions, clusters, roles and stuff.
My commands:
Back up:
dumb_all > filename
Compress:
zip -f mybackup
Uncompress and restore:
sudo gunzip -c /home/ubuntu/Desktop/backupFile.zip | psql -U postgres
The issue is in the restore process, I got an error
invalid command \.
ERROR: syntax error at or near "2"
LINE 1: 2 2 1
^
invalid command \.
ERROR: syntax error at or near "1"
LINE 1: ...
^
out of memory
Plus, the tables with partitions did not restored. also some tables restored without any data!
Please help!
EDIT
I used pgAdmin to do the back up, using the "backup server" option.
If you did used zip to compress the output, then you should use unzip do uncompress it, not gunzip, they use different formats/algorithms.
I'd suggest you to use gzip and gunzip only. For instance, if you generated a backup named mybackup.sql, you can gzip it with:
gzip mybackup.sql
It will generate a file named mybackup.sql.gz. Then, to restore, you can use:
gunzip -c mybackup.sql.gz | psql -U postgres
Also, I'd suggest you to avoid using pgAdmin to do the dump. Not that it can't do, it is just that you can't automatize it, you can easily use pg_dumpall the same way:
pg_dumpall -U postgres -f mybackup.sql
You can either dump and compress without intermediate files using pipe:
pg_dumpall -U postgres | gzip -c > mybackup.sql.gz
BTW, I'd really suggest you avoiding pg_dumpall and use pg_dump with custom format for each database, as with that you already get the result compressed and easier to use latter. But pg_dumpall is ok for small databases.
We are switching hosts and the old one provided a SQL dump of the PostgreSQL database of our site.
Now, I'm trying to set this up on a local WAMP server to test this.
The only problem is that I don't have an idea how to import this database in the PostgreSQL 9 that I have set up.
I tried pgAdmin III but I can't seem to find an 'import' function. So I just opened the SQL editor and pasted the contents of the dump there and executed it, it creates the tables but it keeps giving me errors when it tries to put the data in it.
ERROR: syntax error at or near "t"
LINE 474: t 2011-05-24 16:45:01.768633 2011-05-24 16:45:01.768633 view...
The lines:
COPY tb_abilities (active, creation, modtime, id, lang, title, description) FROM stdin;
t 2011-05-24 16:45:01.768633 2011-05-24 16:45:01.768633 view nl ...
I've also tried to do this with the command prompt but I can't find the command that I need.
If I do
psql mydatabase < C:/database/db-backup.sql;
I get the error
ERROR: syntax error at or near "psql"
LINE 1: psql mydatabase < C:/database/db-backu...
^
What's the best way to import the database?
psql databasename < data_base_dump
That's the command you are looking for.
Beware: databasename must be created before importing.
Have a look at the PostgreSQL Docs Chapter 23. Backup and Restore.
Here is the command you are looking for.
psql -h hostname -d databasename -U username -f file.sql
I believe that you want to run in psql:
\i C:/database/db-backup.sql
That worked for me:
sudo -u postgres psql db_name < 'file_path'
I'm not sure if this works for the OP's situation, but I found that running the following command in the interactive console was the most flexible solution for me:
\i 'path/to/file.sql'
Just make sure you're already connected to the correct database. This command executes all of the SQL commands in the specified file.
Works pretty well, in command line, all arguments are required, -W is for password
psql -h localhost -U user -W -d database_name -f path/to/file.sql
Just for funsies, if your dump is compressed you can do something like
gunzip -c filename.gz | psql dbname
As Jacob mentioned, the PostgreSQL docs describe all this quite well.
make sure the database you want to import to is created, then you can import the dump with
sudo -u postgres -i psql testdatabase < db-structure.sql
If you want to overwrite the whole database, first drop the database
# be sure you drop the right database !!!
#sudo -u postgres -i psql -c "drop database testdatabase;"
and then recreate it with
sudo -u postgres -i psql -c "create database testdatabase;"
Follow the steps:
Go to the psql shell
\c db_name
\i path_of_dump [eg:-C:/db_name.pgsql]
I tried many different solutions for restoring my postgres backup. I ran into permission denied problems on MacOS, no solutions seemed to work.
Here's how I got it to work:
Postgres comes with Pgadmin4. If you use macOS you can press CMD+SPACE and type pgadmin4 to run it. This will open up a browser tab in chrome.
If you run into errors getting pgadmin4 to work, try killall pgAdmin4 in your terminal, then try again.
Steps to getting pgadmin4 + backup/restore
1. Create the backup
Do this by rightclicking the database -> "backup"
2. Give the file a name.
Like test12345. Click backup. This creates a binary file dump, it's not in a .sql format
3. See where it downloaded
There should be a popup at the bottomright of your screen. Click the "more details" page to see where your backup downloaded to
4. Find the location of downloaded file
In this case, it's /users/vincenttang
5. Restore the backup from pgadmin
Assuming you did steps 1 to 4 correctly, you'll have a restore binary file. There might come a time your coworker wants to use your restore file on their local machine. Have said person go to pgadmin and restore
Do this by rightclicking the database -> "restore"
6. Select file finder
Make sure to select the file location manually, DO NOT drag and drop a file onto the uploader fields in pgadmin. Because you will run into error permissions. Instead, find the file you just created:
7. Find said file
You might have to change the filter at bottomright to "All files". Find the file thereafter, from step 4. Now hit the bottomright "Select" button to confirm
8. Restore said file
You'll see this page again, with the location of the file selected. Go ahead and restore it
9. Success
If all is good, the bottom right should popup an indicator showing a successful restore. You can navigate over to your tables to see if the data has been restored propery on each table.
10. If it wasn't successful:
Should step 9 fail, try deleting your old public schema on your database. Go to "Query Tool"
Execute this code block:
DROP SCHEMA public CASCADE; CREATE SCHEMA public;
Now try steps 5 to 9 again, it should work out
Summary
This is how I had to backup/restore my backup on Postgres, when I had error permission issues and could not log in as a superuser. Or set credentials for read/write using chmod for folders. This workflow works for a binary file dump default of "Custom" from pgadmin. I assume .sql is the same way, but I have not yet tested that
I use:
cat /home/path/to/dump/file | psql -h localhost -U <user_name> -d <db_name>
Hope this will help someone.
If you are using a file with .dump extension use:
pg_restore -h hostname -d dbname -U username filename.dump
I noticed that many examples are overcomplicated for localhost where just postgres user without password exist in many cases:
psql -d db_name -f dump.sql
You can do it in pgadmin3. Drop the schema(s) that your dump contains. Then right-click on the database and choose Restore. Then you can browse for the dump file.
I used this
psql -d dbName -U username -f /home/sample.sql
Postgresql12
from sql file:
pg_restore -d database < file.sql
from custom format file:
pg_restore -Fc database < file.dump
I had more than 100MB data, therefore I could not restore database using Pgadmin4.
I used simply postgres client, and write below command.
postgres#khan:/$ pg_restore -d database_name /home/khan/Downloads/dump.sql
It worked fine and took few seconds.You can see below link for more information.
https://www.postgresql.org/docs/8.1/app-pgrestore.html