i have a table (screenshot attached).when the Table has 3 or more records i don't want it it to pick 3rd row
SQL query:
SELECT POA.PurchaseOrder_AuthID, POA.Authorised,wc.Name ,POA.DateAuthorised,POA.DelayEscalationSentAt,AuthorisingContactID
FROM dbo.wsm_PurchaseOrder_Auth AS POA
INNER JOIN wsm_Contact AS WC ON POA.AuthorisingContactID=wc.ContactID
WHERE POA.PONumber = 'PO3841905_51_200908' order by POA.PurchaseOrder_AuthID
ASC
i can't use Group by as i need all the rows without aggregate function \
authorizing contact id can be different in 2nd and 3rd row (currently showing same in table)
not wanting to pick the 3rd row using ROW_NUMBER window function
select * from
(
select field1,
row_number() over(order by purchaseorder_authid) rn
from table
) x
where x.rn <> 3
this question answered in Previous post but
for sql server after 2012 use this Code:
SELECT *
FROM Table
ORDER BY OrdClm ASC
OFFSET 2 ROWS
FETCH NEXT 1 ROWS ONLY
and Previous version:
SELECT *
FROM (SELECT ROW_NUMBER() OVER(ORDER BY OrdClm ) RowNr, * FROM Table ) t
WHERE RowNr=3
I have DB which having 5 column as follows:
message_id
user_id_send
user_id_rec
message_date
message_details
Looking for a SQL Serve Query, I want to Filter Results from two columns (user_id_send,user_id_rec)for Given User ID based on following constrains:
Get the Latest Record (filtered on date or message_id)
Only Unique Records (1 - 2 , 2 - 1 are same so only one record will be returned which ever is the latest one)
Ordered by Descending based on message_id
SQL Query
The main purpose of this query is to get records of user_id to find out to whom he has sent messages and from whom he had received messages.
I have also attached the sheet for your reference.
Here is my try
WITH t
AS (SELECT *
FROM messages
WHERE user_id_sender = 1)
SELECT DISTINCT user_id_reciever,
*
FROM t;
WITH h
AS (SELECT *
FROM messages
WHERE user_id_reciever = 1)
SELECT DISTINCT user_id_sender,
*
FROM h;
;WITH tmpMsg AS (
SELECT M2.message_id
,M2.user_id_receiver
,M2.user_id_sender
,M2.message_date
,M2.message_details
,ROW_NUMBER() OVER (PARTITION BY user_id_receiver+user_id_sender ORDER BY message_date DESC) AS 'RowNum'
FROM messages M2
WHERE M2.user_id_receiver = 1
OR M2.user_id_sender = 1
)
SELECT T.message_id
,T.user_id_receiver
,T.user_id_sender
,T.message_date
,T.message_details
FROM tmpMsg T
WHERE RowNum <= 1
The above should fetch you the results you are looking for when you query for a particular user_id (replace the 1 with parameter e.g. #p_user_id). The user_id_receiver+user_id_sender in the PARTITION clause ensure that records with user id combinations such as 1 - 2, 2 - 1 are not selected twice.
Hope this helps.
select * from
(
select ROW_NUMBER() over (order by message_date DESC) as rowno,
* from messages
where user_id_receiver = 1
--order by message_date DESC
) T where T.rowno = 1
UNION ALL
select * from
(
select ROW_NUMBER() over (order by message_date DESC) as rowno,
* from messages
where user_id_sender = 1
-- order by message_date DESC
) T where T.rowno = 1
Explanation: For each group of user_id_sender, it orders internally by message_date desc, and then adds row numbers, and we only want the first one (chronologically last). Then do the same for user_id_receiver, and union the results together to get 1 result set with all the desired rows. You can then add your own order by clause and additional where conditions at the end as required.
Of course, this only works for any 1 user_id at a time (replace =1 with #user_id).
To get a result from all user_id's at once, is a totally different query, so I hope this helps?
I want to create stored procedure with pagination along with top 100 against a subset of a table. For example in a table(ex:employee table) with more than 3,000,000 records, I want to take the top 100,000 records and do the pagination. I'm able to do the pagination using below script, but I want to take the top 100,000 records and do the pagination.
DECLARE #currentPageNo int,#takeData int
SET #currentPageNo =1
SET #takeData = 10
SELECT DISTINCT emp.empid,emp.name,s.Salary,
FROM Employee emp
LEFT OUTER JOIN salary S ON emp.empid=S.empid
where emp.empid=12
ORDER BY emp.empid desc
OFFSET (#currentPageNo - 1) * #takeData ROWS
FETCH NEXT #takeData ROWS ONLY
I need some suggestions on how this can be achieved. I'm using SQL Server 2012.
In order to perform pagination properly you will need to ensure the order of the result set and assign row numbers, for this you can use ROWNUMBER() OVER()
You will also need to know the total count of the entire result set. This will tell you how many total pages you have. You can do this in a secondary query or add another column for Total Rows using COUNT() OVER()
Here's an example using your variables:
DECLARE #currentPageNo int,#takeData int
SET #currentPageNo =0
SET #takeData = 10
SELECT TOP(#currentPageNo) * FROM
(
SELECT ROW_NUMBER() OVER(ORDER BY [ColumnName]) RowNumber, *
FROM (
SELECT DISTINCT emp.empid,emp.name,s.Salary,COUNT(emp.empid) OVER() TotalRows
FROM Employee emp
LEFT OUTER JOIN salary S ON emp.empid=S.empid
where emp.empid=12
) Q1
) Q2
WHERE ( #takeData<>0 AND RowNumber BETWEEN ((#currentPageNo * #takeData) + 1) AND ((#currentPageNo +1) * #takeData))
If I have a SQL statement such as:
SELECT TOP 5
*
FROM Person
WHERE Name LIKE 'Sm%'
ORDER BY ID DESC
PRINT ##ROWCOUNT
-- shows '5'
Is there anyway to get a value like ##ROWCOUNT that is the actual count of all of the rows that match the query without re-issuing the query again sans the TOP 5?
The actual problem is a much more complex and intensive query that performs beautifully since we can use TOP n or SET ROWCOUNT n but then we cannot get a total count which is required to display paging information in the UI correctly. Presently we have to re-issue the query with a #Count = COUNT(ID) instead of *.
Whilst this doesn't exactly meet your requirement (in that the total count isn't returned as a variable), it can be done in a single statement:
;WITH rowCTE
AS
(
SELECT *
,ROW_NUMBER() OVER (ORDER BY ID DESC) AS rn1
,ROW_NUMBER() OVER (ORDER BY ID ASC) AS rn2
FROM Person
WHERE Name LIKE 'Sm%'
)
SELECT *
,(rn1 + rn2) - 1 as totalCount
FROM rowCTE
WHERE rn1 <=5
The totalCount column will have the total number of rows matching the where filter.
It would be interesting to see how this stacks up performance-wise against two queries on a decent-sized data-set.
you'll have to run another COUNT() query:
SELECT TOP 5
*
FROM Person
WHERE Name LIKE 'Sm%'
ORDER BY ID DESC
DECLARE #r int
SELECT
#r=COUNT(*)
FROM Person
WHERE Name LIKE 'Sm%'
select #r
Something like this may do it:
SELECT TOP 5
*
FROM Person
cross join (select count(*) HowMany
from Person
WHERE Name LIKE 'Sm%') tot
WHERE Name LIKE 'Sm%'
ORDER BY ID DESC
The subquery returns one row with one column containing the full count; the cross join includes it with all rows returned by the "main" query"; and "SELECT *" would include new column HowMany.
Depending on your needs, the next step might be to filter out that column from your return set. One way would be to load the data from the query into a temp table, and then return just the desired columns, and get rowcount from the HowMany column from any row.
I want to select the last 5 records from a table in SQL Server without arranging the table in ascending or descending order.
This is just about the most bizarre query I've ever written, but I'm pretty sure it gets the "last 5" rows from a table without ordering:
select *
from issues
where issueid not in (
select top (
(select count(*) from issues) - 5
) issueid
from issues
)
Note that this makes use of SQL Server 2005's ability to pass a value into the "top" clause - it doesn't work on SQL Server 2000.
Suppose you have an index on id, this will be lightning fast:
SELECT * FROM [MyTable] WHERE [id] > (SELECT MAX([id]) - 5 FROM [MyTable])
The way your question is phrased makes it sound like you think you have to physically resort the data in the table in order to get it back in the order you want. If so, this is not the case, the ORDER BY clause exists for this purpose. The physical order in which the records are stored remains unchanged when using ORDER BY. The records are sorted in memory (or in temporary disk space) before they are returned.
Note that the order that records get returned is not guaranteed without using an ORDER BY clause. So, while any of the the suggestions here may work, there is no reason to think they will continue to work, nor can you prove that they work in all cases with your current database. This is by design - I am assuming it is to give the database engine the freedom do as it will with the records in order to obtain best performance in the case where there is no explicit order specified.
Assuming you wanted the last 5 records sorted by the field Name in ascending order, you could do something like this, which should work in either SQL 2000 or 2005:
select Name
from (
select top 5 Name
from MyTable
order by Name desc
) a
order by Name asc
You need to count number of rows inside table ( say we have 12 rows )
then subtract 5 rows from them ( we are now in 7 )
select * where index_column > 7
select * from users
where user_id >
( (select COUNT(*) from users) - 5)
you can order them ASC or DESC
But when using this code
select TOP 5 from users order by user_id DESC
it will not be ordered easily.
select * from table limit 5 offset (select count(*) from table) - 5;
Without an order, this is impossible. What defines the "bottom"? The following will select 5 rows according to how they are stored in the database.
SELECT TOP 5 * FROM [TableName]
Well, the "last five rows" are actually the last five rows depending on your clustered index. Your clustered index, by definition, is the way that he rows are ordered. So you really can't get the "last five rows" without some order. You can, however, get the last five rows as it pertains to the clustered index.
SELECT TOP 5 * FROM MyTable
ORDER BY MyCLusteredIndexColumn1, MyCLusteredIndexColumnq, ..., MyCLusteredIndexColumnN DESC
Search 5 records from last records you can use this,
SELECT *
FROM Table Name
WHERE ID <= IDENT_CURRENT('Table Name')
AND ID >= IDENT_CURRENT('Table Name') - 5
If you know how many rows there will be in total you can use the ROW_NUMBER() function.
Here's an examble from MSDN (http://msdn.microsoft.com/en-us/library/ms186734.aspx)
USE AdventureWorks;
GO
WITH OrderedOrders AS
(
SELECT SalesOrderID, OrderDate,
ROW_NUMBER() OVER (ORDER BY OrderDate) AS 'RowNumber'
FROM Sales.SalesOrderHeader
)
SELECT *
FROM OrderedOrders
WHERE RowNumber BETWEEN 50 AND 60;
In SQL Server 2012 you can do this :
Declare #Count1 int ;
Select #Count1 = Count(*)
FROM [Log] AS L
SELECT
*
FROM [Log] AS L
ORDER BY L.id
OFFSET #Count - 5 ROWS
FETCH NEXT 5 ROWS ONLY;
Try this, if you don't have a primary key or identical column:
select [Stu_Id],[Student_Name] ,[City] ,[Registered],
RowNum = row_number() OVER (ORDER BY (SELECT 0))
from student
ORDER BY RowNum desc
You can retrieve them from memory.
So first you get the rows in a DataSet, and then get the last 5 out of the DataSet.
There is a handy trick that works in some databases for ordering in database order,
SELECT * FROM TableName ORDER BY true
Apparently, this can work in conjunction with any of the other suggestions posted here to leave the results in "order they came out of the database" order, which in some databases, is the order they were last modified in.
select *
from table
order by empno(primary key) desc
fetch first 5 rows only
Last 5 rows retrieve in mysql
This query working perfectly
SELECT * FROM (SELECT * FROM recharge ORDER BY sno DESC LIMIT 5)sub ORDER BY sno ASC
or
select sno from(select sno from recharge order by sno desc limit 5) as t where t.sno order by t.sno asc
When number of rows in table is less than 5 the answers of Matt Hamilton and msuvajac is Incorrect.
Because a TOP N rowcount value may not be negative.
A great example can be found Here.
i am using this code:
select * from tweets where placeID = '$placeID' and id > (
(select count(*) from tweets where placeID = '$placeID')-2)
In SQL Server, it does not seem possible without using ordering in the query.
This is what I have used.
SELECT *
FROM
(
SELECT TOP 5 *
FROM [MyTable]
ORDER BY Id DESC /*Primary Key*/
) AS T
ORDER BY T.Id ASC; /*Primary Key*/
DECLARE #MYVAR NVARCHAR(100)
DECLARE #step int
SET #step = 0;
DECLARE MYTESTCURSOR CURSOR
DYNAMIC
FOR
SELECT col FROM [dbo].[table]
OPEN MYTESTCURSOR
FETCH LAST FROM MYTESTCURSOR INTO #MYVAR
print #MYVAR;
WHILE #step < 10
BEGIN
FETCH PRIOR FROM MYTESTCURSOR INTO #MYVAR
print #MYVAR;
SET #step = #step + 1;
END
CLOSE MYTESTCURSOR
DEALLOCATE MYTESTCURSOR
Thanks to #Apps Tawale , Based on his answer, here's a bit of another (my) version,
To select last 5 records without an identity column,
select top 5 *,
RowNum = row_number() OVER (ORDER BY (SELECT 0))
from [dbo].[ViewEmployeeMaster]
ORDER BY RowNum desc
Nevertheless, it has an order by, but on RowNum :)
Note(1): The above query will reverse the order of what we get when we run the main select query.
So to maintain the order, we can slightly go like:
select *, RowNum2 = row_number() OVER (ORDER BY (SELECT 0))
from (
select top 5 *, RowNum = row_number() OVER (ORDER BY (SELECT 0))
from [dbo].[ViewEmployeeMaster]
ORDER BY RowNum desc
) as t1
order by RowNum2 desc
Note(2): Without an identity column, the query takes a bit of time in case of large data
Get the count of that table
select count(*) from TABLE
select top count * from TABLE where 'primary key row' NOT IN (select top (count-5) 'primary key row' from TABLE)
If you do not want to arrange the table in ascending or descending order. Use this.
select * from table limit 5 offset (select count(*) from table) - 5;