I'm trying to connect to the sql server that has been created on Azure using SQL management studio, but i'm getting the following error.
Error message: An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
I have enabled the client IP in the SQL server firewall settings.
Please let me know if anything else need to be taken cared. Thank you
To resolve this error, try one of the following actions:
Make sure that you have configured the firewall on the computer to allow this instance of SQL Server to accept connections. That is, If you are trying to connect from within a corporate network, outbound traffic over port 1433 may not be allowed by your network's firewall. If so, you cannot connect to your Azure SQL Database server unless your IT department opens port 1433. On the Azure Side, you also need to check if the NSG (associated with that subnet the Azure SQL server sitting in) allows the client IP with the specific port 1433.
Add the client IP in the SQL server firewall settings if you enable a server-level firewall.
Telnet the current IP of your Azure SQL Database server with the port to verify the network connection.
Ensure the server name you are connecting to is correct.
Check that your own firewall allows your connection across the internet to the instance.
Typically if it was the Azure firewall side, it would prompt you to add your IP to the firewall rules, provided you're connecting with an admin account.
This cause by network restriction in your lan. you can try by switching your network connnection. It worked for me.
Related
I'm trying to connect IIS which is running on a server in the DMZ to a SQL Server instance on the company intranet. But, I'm getting the following error:
An unhandled exception occurred while processing the request.
Win32Exception: Access is denied.
Unknown location
SqlException: A network-related or instance-specific error occurred while establishing a
connection to SQL Server. The server was not found or was not accessible. Verify that the
instance name is correct and that SQL Server is configured to allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Do I need specific ports opened up on one of the servers? Or is there something else I need to do?
Considering your SQL server is running, start with the networking. On which port is your SQL instance listening (default 1433)?
If you don't know, open the SQL Server Configuration Manager (on the SQL Server). Navigate to the SQL Server Network Configuration > Protocols for %instancename% > TCP/IP > IP Addresses. Then, test if something is blocking this connection; on your IIS in PowerShell:
Test-NetConnection -ComputerName sqlservername -Port 1433
If this doesn't work, check the Inbound Rules for Windows Firewall on your SQL Server. Make sure you work on the right network profile and eventually speak to the one managing your network systems in your company.
Maybe your IIS can't resolve the SQL Servers hostname? Try using the IP and check your DNS configuration.
There might also be something off with your connection string. Mind posting it here?
Background
I have a SQL Server database on my machine, using mixed mode auth and SQL users setup on the database and mapped. When connecting via .NET app, I am able to use both windows auth and sql auth without issues. However when connecting via AWS Schema Migration tool, I am not able to connect.
Checks done:-
SQL Server Browser Service running
Port mapping left to default (1433)
TCP/IP pipeline enabled
Done both sql and windows auth
Instance name given via ##servername command as per SCT doc
Windows user given dbo and serveradmin permissions at global level
and also granted Login and DB engine connect
Ignoring the port no
Ignoring the instance name
Unable to check firewall as both SQL and tool running on same machine
Using same SCT config, I can connect to SQL Server elsewhere so drivers seem to be working.
Log message below
When only localhost provided
com.amazon.sct.dbloader.DbLoaderHandledException: Connection wasn't established. Check connection properties.
java.util.concurrent.ExecutionException: com.amazon.sct.dbloader.DbLoaderHandledException: Connection wasn't established. Check connection properties.
When name provided for machine and instance
Connection to 'jdbc:sqlserver://localhost\DESKTOP-N01JO12:1433' wasn't established. ERROR: code: 0; message: The TCP/IP connection to the host localhost, port 1433 has failed. Error: "Connection refused: connect. Verify the connection properties. Make sure that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port. Make sure that TCP connections to the port are not blocked by a firewall.".
LOADER ERROR Error chain:
The TCP/IP connection to the host localhost, port 1433 has failed. Error: "Connection refused: connect. Verify the connection properties. Make sure that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port. Make sure that TCP connections to the port are not blocked by a firewall."
Screenshots
For AWS SCT can access SQL server, the following conditions need to be satisfied:
DB has login account and user
User have to has admin role
SQL server authentication enabled
TCP/IP cho SQL server enabled
1. DB has login account and user
You can reference in this link:
https://www.guru99.com/sql-server-create-user.html
2. User have to has admin role
You can reference in this link: https://tableplus.com/blog/2018/10/how-to-create-user-with-admin-access-in-sql-server.html
3. SQL server authentication enabled
You can reference in this link:
SqlServer: Login failed for user
Note: Remember to restart SQL server
4. TCP/IP cho SQL server enabled
You can reference in this link: https://www.youtube.com/watch?v=p9mv2RP6Tck
==> Conclusion
I see you do all the think above
Here is my connection information for SQL server on my EC2 windows server
(I can't embed picture because I don't have enough reputation point)
Perhaps you should write connection information like me
Hope this help!
Yesterday I had no problems. Now when any client (even MSSMS from a client machine) tries to access sql server located on a server in the domain I get the following error: TITLE: Connect to Server
Cannot connect to SERVER\Instance
A network-related or instance-specific error occurred while establishing a connection to SQL Server. ...
SQL server is 2014 on a Windows 2012 R2 Server which also hosts the Active Directory.
I can connect using MSSMS from the server itself to the database. The log states that the service started and is listening on port 63782. I can also connect to sql server from the host machine using ip:port (192.168.0.2, 63782). But I cannot connect to it this way from the clients. (I made no changes to the firewall and the rule for lan-lan is allow all services and all connections).
Shared Memory, TCP/IP and Named Pipes are enabled on the sql server configuration Manager.
I can ping to the server from the clients and to the clients from the server.
The main difference between yesterday and today is that I had to reinstall the DNS on the server. The DNS appears to be working very well and I can't find any DNS errors on the server. I don't think its the firewall but I added two rules that allow UDP and TCP specifically within the local network (even though there is a policy which allows all traffic within the local network).
I am at a loss and would appreciate some assistance into solving the problem or even where to look.
I have installed SQL Server 2005 in mixed mode.
I am able to connect to Database "locally" i.e.
(Server-name/Instance or internal-ip/Instance) using both kinds of Authentication.
I have configured SQL Server for remote connection by following below steps
Steps:
Enable remote connections on the instance of SQL Server that you want to connect to from a remote computer.
Turn on the SQL Server Browser service.
Configure the firewall to allow network traffic that is related to SQL Server and to the SQL Server Browser service. Ref: http://support.microsoft.com/kb/914277#method3
In addition, I have turned off my firewall.
I am able to ping my computer through the External IP.
But when it comes to connecting to sql server, its giving the error.
"TITLE: Connect to Server
Cannot connect to <ip address>\SQLEXPRESS.
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
Please help me,
I have referred many article and tested all possible solution, but nothing seems to be working for me.
It turned out to be an issue with Port Forwarding from my Modem/Router to respective Machine IP.
To resolve this issue, I just configured my Router so that it can accept the request on some specific port [External IP:port_number] and then map that request to my machine's [Internal IP:port_number] as multiple computers were connected to a single router.
Also, please make sure that Firewall on your server is configured correctly to accept the inbound network traffic on that specific port.
The application I'm using tries to connect SQL Server named instance running on a dedicated database server. Here's the error I'm getting:
The TCP/IP connection to the host <instance_name>, port 1433 has failed. Error: Connection refused: connect.
Is the firewall blocking my access or what? Should I dedicate a different port for this application?
The error refused connect implies that your connection does not have permissions to connect to this instance of SQL Server.
Are you using Windows Authentication or a SQL Server Login?
For troubleshooting guidelines see: Troubleshooting Server and Database Connection Problems