How would I validate that the user enters a correct input, e.g. for an integer, since I am declaring the variables as ints before. (Meaning alpha would get numerical inputs.)
Also, is there a more general way of validating inputs and getting inputs; other than using scanf?
#include <stdio.h>
int main() {
printf("We will check if your number is odd, even, zero or negative \n");
int input;
printf("Enter your number: \n");
scanf("%d", &input);
if (input < 0){
printf("Number is Negative \n");
}
else if (input == 0){
printf("Number is Zero \n");
}
else if (input % 2 == 0){
printf("Number is Even \n");
}
else if (input % 2 == 1){
printf("Number is Odd \n");
}
return 0;
}
Using the scanf() family implies that the input is expected in perfect syntax for the conversion specifier given (in this case "%d" -> integer).
If you instead want to verify that correctness of the syntax of the input, then you need to take the input as a whole and then parse it yourself.
You can use e.g. fgets() (https://en.cppreference.com/w/c/io/fgets) to do so.
Once you have the input saved in a "string" (chars in an array or allocated memory), you can start "guessing" at what it is, using multiple sscanf() (https://en.cppreference.com/w/c/io/fscanf). This is much easier on a string which is already in memory than on the input stream. Because "wrong guess after partial success, try again from start" is easy in memory but hard on input.
As SomeProgrammerDude has already commented, the way to attempt scanning with sscanf() (in memory, or scanf() on input) is to check the return value; it will tell you about success or failure.
Related
Problem
Develop a C program that checks temperature. The program should accept numbers only. If users enter letters,the program should say, wrong input. Note that temperature should be between 1-35. Any number outside this results in "out of range".
Here is my code. Users who input letters of alphabet should be told "wrong input"
#include <stdio.h>
int main()
{
int temp;
printf("Enter a Temperature between 1-35: ");
scanf("%d",&temp);
if(temp < 1)
{
printf("Input out of range");
}
else if(temp <= 12)
{
printf("Too cold");
}
else if(temp <= 19)
{
printf("Moderately cold");
}
else if(temp <= 25)
{
printf("Normal Temperature");
}
else if(temp <= 30)
{
printf("Hot");
}
else if(temp <= 35)
{
printf("Too Hot");
}
else if(temp > 35)
{
printf("Input out of range");
}
else
{
printf("Wrong Input");
}
return 0;
}
I have tried declaring temp as char in vain.
From the man page
DESCRIPTION:
The scanf() family of functions scans input according to format as described below. This format may contain conversion specifications; the results from such conversions, if any, are stored in the locations pointed to by the pointer arguments that follow format. Each pointer argument must be of a type that is appropriate for the value returned by the corresponding conversion specification.
RETURN VALUE:
On success, these functions return the number of input items successfully matched and assigned; this can be fewer than provided for, or even zero, in the event of an early matching failure.
As per this, you should check the return value of scanf.
if (scanf ("%d%, &temp) != 1)
{
fprintf(stderr, "Error: Invalid input.\n");
exit(EXIT_FAILURE);
}
It will take care of characters, but if you enter a floating point variable, it will truncate the number — discard the mantissa — and accept the whole part as a valid number. If you enter an integer followed by some junk, scanf reads the input till it find the first non-integer — leaving the rest of the input in the input buffer(which itself lead to 10 other problems) — and accepts the number. There are many other issues with scanf, you'll find plenty of questions pertaining to them on stackoverflow.
OT:
Suggest using the double data type.
Suggest looking into fgets and strtol/strtod family of functions. Suggest reading the man page of the functions during coding.
See also: http://sekrit.de/webdocs/c/beginners-guide-away-from-scanf.html
https://man7.org/linux/man-pages/man3/scanf.3.html
I have to finnish a college project, and a part of my code is acting strangely.
The goal of that part is to get an user input of an integer and store it in a variable so that i can use it later, however if the user inputs a character I have to ask for the number again.
I used the scanf function to get the user input and put it inside a while loop to continuously ask for the input in case it's invalid.
The problem is that when a user inputs a character, the code freaks out and starts running the while loop without stopping in the scanf to get the user input.
It makes sense that the loop condition is always true but the strange part is that it doesn't stop to read new inputs.
I deconstructed my code in order to replicate the problem to make it easier to debug.
I know that there are some useless variables but in my original code they are useful, I just kept them there to make it look similar to the original.
I can only use scanf to get user input, despite knowing them, in this project I am only allowed to use scanf. I can't use scanf's format to get characters, only numerical types are allowed in this project.
C11 is the version of the standart we are using in classes.
I'm sory if the solution for this is a dumb thing, I'm not good at C and I'm having some difficultlies this semester...
Thanks in advance.
while (!verification) {
printf(">>>"); //write values in here
check = scanf("\n%d", &var); //input a number and store the number of valid inputs
if (check) verification = 1; //if the input is a number then the while condition should turn to false with this statement
printf("var = %d, check = %d, verification = %d\n", var, check, verification); //printing all variables
}
If the user does not input an integer there are characters left in the input stream after the call to scanf. Therefor you need to read to end of line before making the next attempt to read an integer. Otherwise scanf will try to read the same non-integer characters again and again. Here is an example:
#include <stdio.h>
#include <stdlib.h>
int main(void)
{
int ch, i, n;
n = scanf("%d", &i);
while (n == 0) {
fprintf(stderr, "wrong input, integer expected\n");
do {
ch = getchar();
} while ((ch != EOF) && (ch != '\n'));
n = scanf("%d", &i);
}
if (n == 1) {
printf("%d\n", i);
} else { /*n == EOF*/
fprintf(stderr, "reading input failed\n");
exit(EXIT_FAILURE);
}
return 0;
}
Don't use scanf() to read input from the user.
It's really only meant for reading data that's known to be in a particular format, and input from a user... often isn't.
While you do correctly check the return value of scanf("%d"), and could fix the case where the input isn't a number, you'll still have problems if the input is either an empty line, or a number followed by something else (123 foobar).
In the case of an empty line scanf() will continue waiting for non-whitespace characters. This is probably confusing, since users will expect hitting enter to do something.
In the case there's trailing stuff after the number, that stuff stays in the input buffer, and the next time you read something, it gets read. This is again probably confusing, since users seldom expect their input to one question to also act as input to another.
Instead, read a full line with fgets() or getline(), then run sscanf() or strtol() on that. This is much more intuitive, and avoids the disconnect caused by scanf() consuming input lines only partially (or consuming more than one line). See also e.g. scanf() leaves the new line char in the buffer
Here, using getline() (POSIX, even if not in standard C. Use fgets() instead if getline() is not available):
#include <stdio.h>
int main(void)
{
char *line = NULL;
size_t len = 0;
int result;
printf("Please enter a number: ");
while (1) {
if (getline(&line, &len, stdin) == -1) {
/* eof or error, do whatever is sensible in your case */
return 1;
}
if (sscanf(line, "%d", &result) != 1) {
printf("That didn't seem like number, please try again: ");
continue;
}
break;
}
printf("You entered the number %d\n", result);
}
The problem is you must discard offending input when the conversion fails.
Here is a simple solution using only scanf() as instructed:
#include <stdio.h>
int main() {
int n;
for (;;) {
printf("Enter an number: ");
switch (scanf("%d", &n)) {
case 1:
/* successful conversion */
printf("The number is %d\n", n);
return 0;
case 0:
/* conversion failure: discard the rest of the line */
scanf("*[^\n]"); // discard characters before the newline if any
scanf("*1[\n]"); // optional: discard the newline if present
printf("Invalid input. Try again\n");
continue;
case EOF:
/* input failure */
printf("Premature end of file\n");
return 1;
}
}
}
This is the part of my program I am stuck on. When I enter say 5.5 my program will run twice, however I want it to read as 5.5 not 5 then 5 again. I understand I need to add %f (hence added a float input), however, I'm not sure how I will implement it after I do a scanf for char. I only want the program to accept integer so it cannot accept 5.5 as a value. It is in a do-while loop. Any help would be greatly appreciated, please explain thoroughly because I am still kind of new to programming.
int amount;
float input;
do{
printf("\nPlease enter integer:");
if(scanf("%d", &amount)!= 1){
//if reads a character or symbol asks to try again
printf("\nEnter numbers only!\n");
getchar();
}
...
Using scanf with an integer format (%d) and then feeding non integer values is a recipe for disaster (or at least your program not working).
Either use scanf and only type integers or read strings and convert the strings to integers.
do {
char* line = NULL;
size_t sz = 0;
printf("\nPlease enter integer:");
getline(&line, &sz, stdin);
if (line == NULL) {
// TODO error handling
// Can also check the getline() -1 is an error.
} else {
// atoi returns 0 on error, so if 0 is a valid value you'll
// need special case handling to determine if you've got a
// "valid" 0 or not.
amount = atoi(line);
free(line);
}
I'm trying to make a program where the user inputs value to an array. What is actually required is that the program should validate against a char character. So if the user inputs a random char such as 'n' the program should tell him "You introduced a char, please input an integer: ".
How is that possible to make that without using a char variable?
for (i = 1; i <= size; i++) {
printf("Introduce the value #%d of the list: ", i);
scanf("%d", &list[i]);
if () { // I'm blocked right in this line of code.
printf("What you tried to introduce is a char, please input an integer: ");
scanf("%d", &list[i]);
}
Thanks in advance.
As #MFisherKDX says, check the return value of scanf. From the scanf man page:
These functions return the number of input items successfully matched
and assigned, which can be fewer than provided for, or even zero in
the event of an early matching failure.
The value EOF is returned if the end of input is reached before either
the first successful conversion or a matching failure occurs. EOF is
also returned if a read error occurs, in which case the error
indicator for the stream (see ferror(3)) is set, and errno is set
indicate the error.
So capturing the return value of scanf in an int variable and then comparing that variable to 1 (in your case, because you are only attempting to read 1 item) should tell you if scanf successfully read an integer value.
However, there is a nasty pitfall when using scanf that you should be aware of. If you do type n at the prompt, scanf will fail and return 0, but it will also not consume the input you typed. Which means that the next time you call scanf, it will read the same input (the n character you typed), and fail again. And it will keep doing so no matter how many times you call scanf. It always amazes me that computer science educators continue to teach scanf to students, given not only this potential pitfall, but several other pitfalls as well. I wish I had a nickel for every hour that some CS student somewhere has spent struggling to get scanf to behave the way their intuition tells them it should. I'd be retired on my own private island by now. But I digress.
One way around this particular pitfall is to check if scanf failed, and if so, to purposely consume and discard all input from stdin up to and including the next newline character or EOF, whichever comes first.
First let's look at some unfixed code that causes an infinite loop if you enter a non-integer as input:
// Typing the letter 'n' and hitting <Enter> here causes an infinite loop:
int num, status;
while (1) {
printf("Enter a number: ");
status = scanf("%d", &num);
if (status == 1)
printf("OK\n");
else
printf("Invalid number\n");
}
The above code will (after you type n and hit <Enter>), will enter an infinite loop, and just start spewing "Invalid number" over and over. Again, this is because the n you entered never gets cleared out of the input buffer.
There are a few possible ways to get around this problem, but the consensus seems to be that the most portable and reliable way to do so is as follows:
// Fixed. No more infinite loop.
int num, status;
while (1) {
printf("Enter a number: ");
status = scanf("%d", &num);
if (status == 1)
printf("OK\n");
else {
printf("Invalid number\n");
// Consume the bad input, so it doesn't keep getting re-read by scanf
int ch;
while ((ch = getchar()) != '\n' && ch != EOF) ;
if (ch == EOF) break;
}
}
The function scanf() will returns the number of elements read, so in this case it will return 1 every time it reads an int and 0 when it reads a char, so you just need to verify that return value.
Keep in mind that after reading a character it will remain in the buffer so if you use the scanf() command again it will read the character again and repeat the error. To avoid that you need to consume the character with while(getchar() != '\n');
With that in mind I modified your code so that it works properly printing an error message if a character is introduced and asking for a new int.
for (int i = 1; i <= size; i++) {
printf("Introduce the value #%d of the list: ", i);
while (!scanf("%d", &list[i])) { //verifies the return of scanf
while(getchar() != '\n'); //consumes the character in case of error
printf("What you tried to introduce is a char\n");
printf("please introduce the value #%d of the list: ", i);
}
}
I have been trying to add some experience in C to my experience with Python and started with a basic addition program. One thing that I'm trying to do is check if the input is a number or a character as seen here:
#include <stdio.h>
#include <ctype.h>
int main()
{
int n, sum=0,c,value;
printf("Enter the Number of Integers You Want to Add\n");
scanf("%d", &n);
if(isdigit(n))
{
printf("Enter %d Integers\n", n);
for(c=1; c<=n; c++)
{
scanf("%d", &value);
if(isalpha(value))
{
printf("ENTER INTEGER NOT CHARACTER\n");
break;
}
else
{
sum = sum + value;
}
}
printf("Sum of Entered Integers = %d\n",sum);
}
else
{
printf("ENTER INTEGER NOT CHARACTER\n");
break;
}
return 0;
}
Initially I had tried this using isalpha(), and the program worked fine when adding numbers but interpreted characters as zeros instead of printing the "not an integer" statement. However, now that I reworked it to use isdigit(), it does not recognize ANY input as an integer, whether or not it is. Is there something that I'm just doing wrong?
When you use scanf to read an integer, you get just that, an integer. (To read a single character, you need %c and a pointer-to-char).
When you use isdigit(), you need to supply the representation of that character (e.g. in ASCII, the character '0' has the representation 48, which is indeed its value as an integer). To recap:
isdigit(0) is false
isdigit(48) is true (for ASCII, ISO8859, UTF-8)
isdigit('0') is true (no matter the character set)
isdigit('0' + n) is true for integers n = 0 ... 9
PS: Not testing the return value from scanf is asking for trouble...
Neither isdigit nor isalpha work as you think they do. The intent of those library functions is to check whether a given code point, represented as an int, is within a subset of points defined by the standard to be digit characters or alpha characters.
You should be checking the results of your scanf calls rather than assuming they just work, and acting on those results accordingly. If you request an integer and one is successfully scanned, then it will tell you so. If that fails, your course of action is probably to consume the rest of the line (through newline or EOF) and possibly try again:
#include <stdio.h>
int main()
{
int n,value,sum=0;
printf("Enter the Number of Integers You Want to Add\n");
if (scanf("%d", &n) == 1 && n > 0)
{
printf("Enter %d Integers\n", n);
while (n--)
{
if (scanf("%d", &value) == 1)
{
sum = sum + value;
}
else
{
// consume the rest of the line. if not EOF, we
// loop around and try again, otherwise break.
while ((value = fgetc(stdin)) != EOF && value != '\n');
if (value == EOF)
break;
++n;
}
}
printf("Sum of Entered Integers = %d\n", sum);
}
return 0;
}
Properly done you should be able to enter valid integers beyond single digits (i.e. values > 10 or < 0), which the above allows.
The %d marker to scanf tells it to interpret the input as a number (more accurately, it indicates that the pointer in the arguments points to an integer type). It can't do anything but put an integer into that argument. If it can't interpret the input as a number, scanf stops scanning the input and returns immediately.
isdigit() evaluates its argument as a character code, as Jens points out above. However, scanf already turned the character code into a pure number.
From the scanf man page:
On success, the function returns the number of items of the argument list
successfully filled.
In your program, you are trying to read just one item from stdin, so scanf should return 1. So check for that and you'll know that it all worked out ok:
printf("Enter the Number of Integers You Want to Add\n");
while(scanf("%d", &n) != 1) {
printf("That's not a valid integer. Please try again.\n");
}
You cannot use isdigit() the way you are using it because you're already using scanf to convert the user input to an integer. If the user had not input an integer, scanf would have already failed.
Look at the man pages for all the C functions you are using, they will show you what the function expects and what the return values will be under different circumstances.
In the case of isdigit(), the input is expected to be an unsigned char representing an ASCII character. This can be a bit confusing because ASCII characters are in fact represented as a type of integer, and a string is an array of those. Unlike languages like Python which hide all that from you. But there is a big difference between the STRING of a number (array of characters that contain the characters of the digits of the number) and the INTEGER itself which is in a form the processor actually uses to do math with... (simplified explanation, but you get the idea).