I'm trying to use AngularJS $location to set the browser's url, like this:
$location.path("/post").search({
id: post.id
});
but whenever I do the url gets set like http://localhost:5000/#!/post?id=0 instead of http://localhost:5000/post?id=0
Is there any reason the #!/ shows up?
In app config you should use
$locationProvider.html5Mode(true)
If you want to remove this prefix, add this code to your config:
appModule.config(['$locationProvider', function($locationProvider) {
$locationProvider.hashPrefix('');
}]);
Related
Now I have Angular JS example with rouring:
How I can specify URL params in Plunker that to check that? I mean to so something like: /test/4 Working example:
[http://plnkr.co/edit/ChMaiougIW4KiNNkUTlO?p=preview][1]
Two changes are required:
In app.js, you need to configure $locationProvider for html5Mode:
app.config(['$locationProvider',
function($locationProvider) {
$locationProvider
.html5Mode(true)
.hashPrefix('!');
}
])
In index.html, you need to make your links relative, using html5Mode like: Go to test.
Angular will rewrite the href if the browser doesn't support pushState.
Is it possible use $stateParams without setting $stateProvider, $urlRouterProvider?
I would use $stateParams only in few page of my website!
For me html5 mode dont work (or I'm not able!). I change in normal mode so.
Put in your config:
.config(function($locationProvider) {
$locationProvider.html5Mode(false);
$locationProvider.hashPrefix('!');
})
then make the href link so:
<a href="/page_details.html#!/?id=xxx">
and then in your controller of details page:
var param = $location.search().id;
You can use $location.search() which will give you parameter from URL
If you want to get specific parameter you can do below code
$location.search().param
param will be parameter name which you want to search.
Hi friends i know how to go to an another page in jquery, I need the same in angular js.
$('#leaderboar').on('click',function(){
document.location.href='HomeScreen.html';
});
Can any one help me out in this.
Thanks
If you just want to redirect to a page(as in your jQuery code above) you can use :-
$location.path('/home');
You can also use $window as below :-
$window.location.href = 'HomeScreen.html'
From Angular documentation :-
$location does not cause a full page reload when the browser URL is changed. To reload the page after changing the URL, use the lower-level API, $window.location.href.
$location.path('/other-page');
...
app.config(['$routeProvider', function ($routeProvider) {
$routeProvider
.when('/other-page', { templateUrl: 'other-page.html', controller: 'PageCtrl' })
I'd like to read the values of URL query parameters using AngularJS. I'm accessing the HTML with the following URL:
http://127.0.0.1:8080/test.html?target=bob
As expected, location.search is "?target=bob".
For accessing the value of target, I've found various examples listed on the web, but none of them work in AngularJS 1.0.0rc10. In particular, the following are all undefined:
$location.search.target
$location.search['target']
$location.search()['target']
Anyone know what will work? (I'm using $location as a parameter to my controller)
Update:
I've posted a solution below, but I'm not entirely satisfied with it.
The documentation at Developer Guide: Angular Services: Using $location states the following about $location:
When should I use $location?
Any time your application needs to react to a change in the current
URL or if you want to change the current URL in the browser.
For my scenario, my page will be opened from an external webpage with a query parameter, so I'm not "reacting to a change in the current URL" per se. So maybe $location isn't the right tool for the job (for the ugly details, see my answer below). I've therefore changed the title of this question from "How to read query parameters in AngularJS using $location?" to "What's the most concise way to read query parameters in AngularJS?". Obviously I could just use javascript and regular expression to parse location.search, but going that low-level for something so basic really offends my programmer sensibilities.
So: is there a better way to use $location than I do in my answer, or is there a concise alternate?
You can inject $routeParams (requires ngRoute) into your controller. Here's an example from the docs:
// Given:
// URL: http://server.com/index.html#/Chapter/1/Section/2?search=moby
// Route: /Chapter/:chapterId/Section/:sectionId
//
// Then
$routeParams ==> {chapterId:1, sectionId:2, search:'moby'}
EDIT: You can also get and set query parameters with the $location service (available in ng), particularly its search method: $location.search().
$routeParams are less useful after the controller's initial load; $location.search() can be called anytime.
Good that you've managed to get it working with the html5 mode but it is also possible to make it work in the hashbang mode.
You could simply use:
$location.search().target
to get access to the 'target' search param.
For the reference, here is the working jsFiddle: http://web.archive.org/web/20130317065234/http://jsfiddle.net/PHnLb/7/
var myApp = angular.module('myApp', []);
function MyCtrl($scope, $location) {
$scope.location = $location;
$scope.$watch('location.search()', function() {
$scope.target = ($location.search()).target;
}, true);
$scope.changeTarget = function(name) {
$location.search('target', name);
}
}
<div ng-controller="MyCtrl">
Bob
Paul
<hr/>
URL 'target' param getter: {{target}}<br>
Full url: {{location.absUrl()}}
<hr/>
<button ng-click="changeTarget('Pawel')">target=Pawel</button>
</div>
To give a partial answer my own question, here is a working sample for HTML5 browsers:
<!DOCTYPE html>
<html ng-app="myApp">
<head>
<script src="http://code.angularjs.org/1.0.0rc10/angular-1.0.0rc10.js"></script>
<script>
angular.module('myApp', [], function($locationProvider) {
$locationProvider.html5Mode(true);
});
function QueryCntl($scope, $location) {
$scope.target = $location.search()['target'];
}
</script>
</head>
<body ng-controller="QueryCntl">
Target: {{target}}<br/>
</body>
</html>
The key was to call $locationProvider.html5Mode(true); as done above. It now works when opening http://127.0.0.1:8080/test.html?target=bob. I'm not happy about the fact that it won't work in older browsers, but I might use this approach anyway.
An alternative that would work with older browsers would be to drop the html5mode(true) call and use the following address with hash+slash instead:
http://127.0.0.1:8080/test.html#/?target=bob
The relevant documentation is at Developer Guide: Angular Services: Using $location (strange that my google search didn't find this...).
It can be done by two ways:
Using $routeParams
Best and recommended solution is to use $routeParams into your controller.
It Requires the ngRoute module to be installed.
function MyController($scope, $routeParams) {
// URL: http://server.com/index.html#/Chapter/1/Section/2?search=moby
// Route: /Chapter/:chapterId/Section/:sectionId
// $routeParams ==> {chapterId:'1', sectionId:'2', search:'moby'}
var search = $routeParams.search;
}
Using $location.search().
There is a caveat here. It will work only with HTML5 mode. By default, it does not work for the URL which does not have hash(#) in it http://localhost/test?param1=abc¶m2=def
You can make it work by adding #/ in the URL. http://localhost/test#/?param1=abc¶m2=def
$location.search() to return an object like:
{
param1: 'abc',
param2: 'def'
}
$location.search() will work only with HTML5 mode turned on and only on supporting browser.
This will work always:
$window.location.search
Just to summerize .
If your app is being loaded from external links then angular wont detect this as a URL change so $loaction.search() would give you an empty object . To solve this you need to set following in your app config(app.js)
.config(['$routeProvider', '$locationProvider', function ($routeProvider, $locationProvider)
{
$routeProvider
.when('/', {
templateUrl: 'views/main.html',
controller: 'MainCtrl'
})
.otherwise({
redirectTo: '/'
});
$locationProvider.html5Mode(true);
}]);
Just a precision to Ellis Whitehead's answer. $locationProvider.html5Mode(true); won't work with new version of angularjs without specifying the base URL for the application with a <base href=""> tag or setting the parameter requireBase to false
From the doc :
If you configure $location to use html5Mode (history.pushState), you need to specify the base URL for the application with a tag or configure $locationProvider to not require a base tag by passing a definition object with requireBase:false to $locationProvider.html5Mode():
$locationProvider.html5Mode({
enabled: true,
requireBase: false
});
you could also use $location.$$search.yourparameter
I found that for an SPA HTML5Mode causes lots of 404 error problems, and it is not necessary to make $location.search work in this case. In my case I want to capture a URL query string parameter when a user comes to my site, regardless of which "page" they initially link to, AND be able to send them to that page once they log in. So I just capture all that stuff in app.run
$rootScope.$on('$stateChangeStart', function (e, toState, toParams, fromState, fromParams) {
if (fromState.name === "") {
e.preventDefault();
$rootScope.initialPage = toState.name;
$rootScope.initialParams = toParams;
return;
}
if ($location.search().hasOwnProperty('role')) {
$rootScope.roleParameter = $location.search()['role'];
}
...
}
then later after login I can say
$state.go($rootScope.initialPage, $rootScope.initialParams)
It's a bit late, but I think your problem was your URL. If instead of
http://127.0.0.1:8080/test.html?target=bob
you had
http://127.0.0.1:8080/test.html#/?target=bob
I'm pretty sure it would have worked. Angular is really picky about its #/
I'd like to read the values of URL query parameters using AngularJS. I'm accessing the HTML with the following URL:
http://127.0.0.1:8080/test.html?target=bob
As expected, location.search is "?target=bob".
For accessing the value of target, I've found various examples listed on the web, but none of them work in AngularJS 1.0.0rc10. In particular, the following are all undefined:
$location.search.target
$location.search['target']
$location.search()['target']
Anyone know what will work? (I'm using $location as a parameter to my controller)
Update:
I've posted a solution below, but I'm not entirely satisfied with it.
The documentation at Developer Guide: Angular Services: Using $location states the following about $location:
When should I use $location?
Any time your application needs to react to a change in the current
URL or if you want to change the current URL in the browser.
For my scenario, my page will be opened from an external webpage with a query parameter, so I'm not "reacting to a change in the current URL" per se. So maybe $location isn't the right tool for the job (for the ugly details, see my answer below). I've therefore changed the title of this question from "How to read query parameters in AngularJS using $location?" to "What's the most concise way to read query parameters in AngularJS?". Obviously I could just use javascript and regular expression to parse location.search, but going that low-level for something so basic really offends my programmer sensibilities.
So: is there a better way to use $location than I do in my answer, or is there a concise alternate?
You can inject $routeParams (requires ngRoute) into your controller. Here's an example from the docs:
// Given:
// URL: http://server.com/index.html#/Chapter/1/Section/2?search=moby
// Route: /Chapter/:chapterId/Section/:sectionId
//
// Then
$routeParams ==> {chapterId:1, sectionId:2, search:'moby'}
EDIT: You can also get and set query parameters with the $location service (available in ng), particularly its search method: $location.search().
$routeParams are less useful after the controller's initial load; $location.search() can be called anytime.
Good that you've managed to get it working with the html5 mode but it is also possible to make it work in the hashbang mode.
You could simply use:
$location.search().target
to get access to the 'target' search param.
For the reference, here is the working jsFiddle: http://web.archive.org/web/20130317065234/http://jsfiddle.net/PHnLb/7/
var myApp = angular.module('myApp', []);
function MyCtrl($scope, $location) {
$scope.location = $location;
$scope.$watch('location.search()', function() {
$scope.target = ($location.search()).target;
}, true);
$scope.changeTarget = function(name) {
$location.search('target', name);
}
}
<div ng-controller="MyCtrl">
Bob
Paul
<hr/>
URL 'target' param getter: {{target}}<br>
Full url: {{location.absUrl()}}
<hr/>
<button ng-click="changeTarget('Pawel')">target=Pawel</button>
</div>
To give a partial answer my own question, here is a working sample for HTML5 browsers:
<!DOCTYPE html>
<html ng-app="myApp">
<head>
<script src="http://code.angularjs.org/1.0.0rc10/angular-1.0.0rc10.js"></script>
<script>
angular.module('myApp', [], function($locationProvider) {
$locationProvider.html5Mode(true);
});
function QueryCntl($scope, $location) {
$scope.target = $location.search()['target'];
}
</script>
</head>
<body ng-controller="QueryCntl">
Target: {{target}}<br/>
</body>
</html>
The key was to call $locationProvider.html5Mode(true); as done above. It now works when opening http://127.0.0.1:8080/test.html?target=bob. I'm not happy about the fact that it won't work in older browsers, but I might use this approach anyway.
An alternative that would work with older browsers would be to drop the html5mode(true) call and use the following address with hash+slash instead:
http://127.0.0.1:8080/test.html#/?target=bob
The relevant documentation is at Developer Guide: Angular Services: Using $location (strange that my google search didn't find this...).
It can be done by two ways:
Using $routeParams
Best and recommended solution is to use $routeParams into your controller.
It Requires the ngRoute module to be installed.
function MyController($scope, $routeParams) {
// URL: http://server.com/index.html#/Chapter/1/Section/2?search=moby
// Route: /Chapter/:chapterId/Section/:sectionId
// $routeParams ==> {chapterId:'1', sectionId:'2', search:'moby'}
var search = $routeParams.search;
}
Using $location.search().
There is a caveat here. It will work only with HTML5 mode. By default, it does not work for the URL which does not have hash(#) in it http://localhost/test?param1=abc¶m2=def
You can make it work by adding #/ in the URL. http://localhost/test#/?param1=abc¶m2=def
$location.search() to return an object like:
{
param1: 'abc',
param2: 'def'
}
$location.search() will work only with HTML5 mode turned on and only on supporting browser.
This will work always:
$window.location.search
Just to summerize .
If your app is being loaded from external links then angular wont detect this as a URL change so $loaction.search() would give you an empty object . To solve this you need to set following in your app config(app.js)
.config(['$routeProvider', '$locationProvider', function ($routeProvider, $locationProvider)
{
$routeProvider
.when('/', {
templateUrl: 'views/main.html',
controller: 'MainCtrl'
})
.otherwise({
redirectTo: '/'
});
$locationProvider.html5Mode(true);
}]);
Just a precision to Ellis Whitehead's answer. $locationProvider.html5Mode(true); won't work with new version of angularjs without specifying the base URL for the application with a <base href=""> tag or setting the parameter requireBase to false
From the doc :
If you configure $location to use html5Mode (history.pushState), you need to specify the base URL for the application with a tag or configure $locationProvider to not require a base tag by passing a definition object with requireBase:false to $locationProvider.html5Mode():
$locationProvider.html5Mode({
enabled: true,
requireBase: false
});
you could also use $location.$$search.yourparameter
I found that for an SPA HTML5Mode causes lots of 404 error problems, and it is not necessary to make $location.search work in this case. In my case I want to capture a URL query string parameter when a user comes to my site, regardless of which "page" they initially link to, AND be able to send them to that page once they log in. So I just capture all that stuff in app.run
$rootScope.$on('$stateChangeStart', function (e, toState, toParams, fromState, fromParams) {
if (fromState.name === "") {
e.preventDefault();
$rootScope.initialPage = toState.name;
$rootScope.initialParams = toParams;
return;
}
if ($location.search().hasOwnProperty('role')) {
$rootScope.roleParameter = $location.search()['role'];
}
...
}
then later after login I can say
$state.go($rootScope.initialPage, $rootScope.initialParams)
It's a bit late, but I think your problem was your URL. If instead of
http://127.0.0.1:8080/test.html?target=bob
you had
http://127.0.0.1:8080/test.html#/?target=bob
I'm pretty sure it would have worked. Angular is really picky about its #/