I have an nvarchar field in my database called CatCustom which contains comma-separated 5-character codes. It can contain as little as one code, or as many as 20 codes, separated by commas.
Right now, I use this query to add a new 5-character code to the field in given records (in this case the new code is LRR01):
UPDATE dbo.Sources
SET CatCustom = CONCAT_WS(', ', RTRIM(CatCustom), 'LRR01')
WHERE SourceID IN (1,2,3,4,5,8,9,44,63,45,101,102,222,344)
I need to add to this though: I need the record to be updated only if that 5-character code doesn't already exist somewhere in the CatCustom field, to ensure that code is not in there more than once.
How would I accomplish this?
EDIT: I really don't understand how this can be considered a duplicate of the suggested thread. This is a VERY specific case and has nothing to do with creating stored procedures and or variables. The alleged duplicated thread does not really help me - sorry.
Use STRING_SPLIT function to split the comma separated list and then add Not Exist condition in the WHERE clause like below
UPDATE dbo.Sources
SET CatCustom = CONCAT_WS(', ', RTRIM(CatCustom), 'LRR01')
WHERE SourceID IN (1,2,3,4,5,8,9,44,63,45,101,102,222,344)
AND NOT EXISTS (SELECT 1 FROM STRING_SPLIT(CatCustom, ',') where value = 'LRR01')
UPDATE dbo.Sources
SET
CatCustom = CONCAT_WS(', ', RTRIM(CatCustom), 'LRR01')
WHERE
SourceID IN (1,2,3,4,5,8,9,44,63,45,101,102,222,344)
AND CatCustom NOT LIKE '%LRR01%';
Related
I have a requirement to pull data in a specific format and I'm struggling slightly with the ROWTOCOL function and was hoping a fresh pair of eyes might be able to help.
I'm using 10g Oracle DB (10.2) so LISTAGG which appears to do what I need to achieve is not an option.
I need to aggregate a number of usernames into a string delimited with a '$' but I also need to concatenate another column to to build up email addresses.
select
rowtocol('select username_id from username where user_id = '||s.user_id|| 'order by USERNAME_ID asc','#'||d.domain_name||'$')
from username s, domain d
where s.user_id = d.user_id
(I've simplified the query specific to just this function as the actual query is quite large and all works except for this particular function.)
in the DOMAIN Table I have a number of domains such as 'hotmail.com','gmail.com' etc
I need to concatenate the username, an '#' symbol followed by the domain and all delimited with a '$'
such as ......
joe.bloggs#gmail.com$joeblogs#gmail.com$joe_bloggs#gmail.com
I've battled with this and I've got close but in reverse?!.....
gmail.com$joe.bloggs#gmail.com$joeblogs#gmail.com$joe_bloggs
I've also noticed that if I play around with the delimiter (,'#'||d.domain_name||'$') it has a tendency to drop off the first character as can be seen above the preceding '#' has been dropped from the first email address.
Can anyone offer any suggestions as to how to get this working?
Many Thanks in advance!
Assuming you're using the rowtocol function from OTN, and have tables something like:
create table username (user_id number, username_id varchar2(20));
create table domain (user_id number, domain_name varchar2(20));
insert into username values (1, 'joe.bloggs');
insert into username values (1, 'joebloggs');
insert into username values (1, 'joe_bloggs');
insert into domain values (1, 'gmail.com');
Then your original query gets three rows back:
gmail.com$joe.bloggs
gmail.com$joe_bloggs#gmail.com$joebloggs
gmail.com$joe_bloggs#gmail.com$joebloggs
You're passing the data from each of your user IDs to a separate call to rowtocol, which isn't really what you want. You can get the result I think you're after by reversing it; pass the main query that joins the two tables as the select argument to the function, and have that passed query do the username/domain concatenation - that is a separate step to the string aggregation:
select
rowtocol('select s.username_id || ''#'' || d.domain_name from username s join domain d on d.user_id = s.user_id', '$')
from dual;
which gets a single result:
joe.bloggs#gmail.com$joe_bloggs#gmail.com$joebloggs#gmail.com
Whether that fits into your larger query, which you haven't shown, is a separate question. You might need to correlate it with the rest of your query.
There are other ways to string aggregation in Oracle, but this function is one way, and you already have it installed. I'd look at alternatives though, such as ThomasG's answer, which make it a bit clearer what's going on I think.
As Alex told you in comments, this ROWTOCOL isn't a standard function so if you don't show its code, there's nothing we can do to fix it.
However you can accomplish what you want in Oracle 10 using the XMLAGG built-in function.
try this :
SELECT
rtrim (xmlagg (xmlelement (e, s.user_id || '#' || d.domain_name || '$')).extract ('//text()'), '$') whatever
FROM username s
INNER JOIN domain d ON s.user_id = d.user_id
I want to replace a string in sql script. Im using this query
update [master].[dbo].[Test]
set Student_ID = REPLACE (Student_ID , '1|2_', '1|2_345_')
I think my query is correct but im getting this error "String or binary data would be truncated.The statement has been terminated"
I think this is happen because in column Student_ID have redundant data like "hdhvjf124rgrthrt". How to delete the rows that contain "hdhvjf124rgrthrt" stuffs?
"String or binary data would be truncated.The statement has been terminated"
This exception is usually means that your db field doesn't have enough
length.
I think after you replace string, result string length is larger than column data length. try change column size and run script again.
Try this:
update [master].[dbo].[Test]
set Student_ID = REPLACE (Student_ID , '1|2_', '1|2_345_')
WHERE Student_ID like '%' + '1|2_' + '%'
You can delete those records with:
DELETE FROM [master].[dbo].[Test]
WHERE Student_ID LIKE '%hdhvjf124rgrthrt%'
I don't think that's the problem though. I think the length of Student_ID is too short when you do the replace (since you are adding characters). What is the length of Student_ID and how long are the actual values of Student_ID?
You must have some data that already has a length of 252 or more.
Thus when you replace '1|2_' with '1|2_345_' you are pushing it over the 255 length as you are adding 4 extra characters, or more if more that one occurance of the old pattern exists.
Try running a query to see....
SELECT LEN(StudentId) FROM TEST ORDER BY 1 DESC
That's your problem truncation wise.
However, you have asked how to do the DELETE and #HoneyBadger has already shown you that.
I m trying to write if statement to give error message if user try to add existing ID number.When i try to enter existing id i get error .untill here it s ok but when i type another id no and fill the fields(name,adress etc) it doesnt go to database.
METHOD add_employee.
DATA: IT_EMP TYPE TABLE OF ZEMPLOYEE_20.
DATA:WA_EMP TYPE ZEMPLOYEE_20.
Data: l_count type i value '2'.
SELECT * FROM ZEMPLOYEE_20 INTO TABLE IT_EMP.
LOOP AT IT_EMP INTO WA_EMP.
IF wa_emp-EMPLOYEE_ID eq pa_id.
l_count = l_count * '0'.
else.
l_count = l_count * '1'.
endif.
endloop.
If l_count eq '2'.
WA_EMP-EMPLOYEE_ID = C_ID.
WA_EMP-EMPLOYEE_NAME = C_NAME.
WA_EMP-EMPLOYEE_ADDRESS = C_ADD.
WA_EMP-EMPLOYEE_SALARY = C_SAL.
WA_EMP-EMPLOYEE_TYPE = C_TYPE.
APPEND wa_emp TO it_emp.
INSERT ZEMPLOYEE_20 FROM TABLE it_emp.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
TITEL = 'INFO'
TEXTLINE1 = 'Record Added Successfully.'.
elseif l_count eq '0'.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
TITEL = 'INFO'
TEXTLINE1 = 'Selected ID already in database.Please type another ID no.'.
ENDIF.
ENDMETHOD.
I'm not sure I'm getting your explanation. Why are you trying to re-insert all the existing entries back into the table? You're just trying to insert C_ID etc if it doesn't exist yet? Why do you need all the existing entries for that?
If so, throw out that select and the loop completely, you don't need it. You have a few options...
Just read the table with your single entry
SELECT SINGLE * FROM ztable INTO wa WITH KEY ID = C_ID etc.
IF SY-SUBRC = 0.
"this entry exists. popup!
ENDIF.
Use a modify statement
This will overwrite duplicate entries with new data (so non key fields may change this way), it wont fail. No need for a popup.
MODIFY ztable FROM wa.
Catch the SQL exceptions instead of making it dump
If the update fails because of an exception, you can always catch it and deal with exceptional situations.
TRY .
INSERT ztable FROM wa.
CATCH sapsql_array_insert_duprec.
"do your popup, the update failed because of duplicate records
ENDTRY.
I think there's a bug when appending in internal table 'IT_EMP' and inserting in 'ZEMPLOYEE_20' table.
Suppose you append the first time and then you insert. But when you append the second time you will have 2 records in 'IT_EMP' that are going to be inserted in 'ZEMPLOYEE_20'. That is because you don't refresh or clear the internal table and there you will have a runtime error.
According to SAP documentation on 'Inserting Lines into Tables ':
Inserting Several Lines
To insert several lines into a database table, use the following:
INSERT FROM TABLE [ACCEPTING DUPLICATE KEYS] . This
writes all lines of the internal table to the database table in
one single operation. The same rules apply to the line type of
as to the work area described above. If the system is able to
insert all of the lines from the internal table, SY-SUBRC is set to 0.
If one or more lines cannot be inserted because the database already
contains a line with the same primary key, a runtime error occurs.
Maybe the right direction here is trying to insert the work area directly but before you must check if record already exists using the primary key.
Check the SAP documentation on this issue clicking the link before.
On the other hand, once l_count is zero because of l_count = l_count * '0'. that value will never change to any other number making that you won't append or insert again.
why are you retrieving all entries from zemployee_20 ?
You can directly check wether the 'id' exists already or not by using select single. If exists, then show message, if not, add.
It is recommended to retrieve only one field when its needed and not the entire table with asterisc *
SELECT single employee_id FROM ZEMPLOYEE_20 where employee_id = p_id INTO v_id. ( or field in structure )
if sy-subrc = 0. "exists
"show message
else. "not existing id
"populate structure and then add record to Z table
endif.
Furthermore, l_count is not only unnecessary but also bad implemented.
You can directly use the insert query,if the sy-subrc is unsuccessful raise the error message.
WA_EMP-EMPLOYEE_ID = C_ID.
WA_EMP-EMPLOYEE_NAME = C_NAME.
WA_EMP-EMPLOYEE_ADDRESS = C_ADD.
WA_EMP-EMPLOYEE_SALARY = C_SAL.
WA_EMP-EMPLOYEE_TYPE = C_TYPE.
INSERT ZEMPLOYEE_20 FROM WA_EMP.
If sy-subrc <> 0.
Raise the Exception.
Endif.
I need to fetch Table's TOP_PK, IDENT_CURRENT, IDENT_INCR, IDENT_SEED for which i am building dynamic query as below:
sGetSchemaCommand = String.Format("SELECT (SELECT TOP 1 [{0}] FROM [{1}]) AS TOP_PK, IDENT_CURRENT('[{1}]') AS CURRENT_IDENT, IDENT_INCR('[{1}]') AS IDENT_ICREMENT, IDENT_SEED('[{1}]') AS IDENT_SEED", pPrimaryKey, pTableName)
Here pPrimaryKey is name of Table's primary key column and pTableName is name of Table.
Now, i am facing problem when Table_Name contains " ' " character.(For Ex. KIN'1)
When i am using above logic and building query it would be as below:
SELECT (SELECT TOP 1 [ID] FROM [KIL'1]) AS TOP_PK, IDENT_CURRENT('[KIL'1]') AS CURRENT_IDENT, IDENT_INCR('[KIL'1]') AS IDENT_ICREMENT, IDENT_SEED('[KIL'1]') AS IDENT_SEED
Here, by executing above query i am getting error as below:
Incorrect syntax near '1'.
Unclosed quotation mark after the character string ') AS IDENT_SEED'.
So, can anyone please show me the best way to solve this problem?
Escape a single quote by doubling it: KIL'1 becomes KIL''1.
If a string already has adjacent single quotes, two becomes four, or four becomes eight... it can get a little hard to read, but it works :)
Using string methods from .NET, your statement could be:
sGetSchemaCommand = String.Format("SELECT (SELECT TOP 1 [{0}] FROM [{1}]) AS TOP_PK, IDENT_CURRENT('[{2}]') AS CURRENT_IDENT, IDENT_INCR('[{2}]') AS IDENT_ICREMENT, IDENT_SEED('[{2}]') AS IDENT_SEED", pPrimaryKey, pTableName, pTableName.Replace("'","''"))
EDIT:
Note that the string replace is now only on a new, third substitution string. (I've taken out the string replace for pPrimaryKey, and for the first occurrence of pTableName.) So now, single quotes are only doubled, when they will be within other single quotes.
You need to replace every single quote into two single quotes http://beyondrelational.com/modules/2/blogs/70/posts/10827/understanding-single-quotes.aspx
I have an xml column called OrderXML in an Orders table...
there is an XML XPath like this in the table...
/Order/InternalInformation/InternalOrderBreakout/InternalOrderHeader/InternalOrderDetails/InternalOrderDetail
There InternalOrderDetails contains many InternalOrderDetail nodes like this...
<InternalOrderDetails>
<InternalOrderDetail>
<Item_Number>FBL11REFBK</Item_Number>
<CountOfNumber>10</CountOfNumber>
<PriceLevel>FREE</PriceLevel>
</InternalOrderDetail>
<InternalOrderDetail>
<Item_Number>FCL13COTRGUID</Item_Number>
<CountOfNumber>2</CountOfNumber>
<PriceLevel>NONFREE</PriceLevel>
</InternalOrderDetail>
</InternalOrderDetails>
My end goal is to modify the XML in the OrderXML column IF the Item_Number of the node contains COTRGUID (like '%COTRGUID') AND the PriceLevel=NONFREE. If that condition is met I want to change the PriceLevel column to equal FREE.
I am having trouble with both creating the xpath expression that finds the correct nodes (using OrderXML.value or OrderXML.exist functions) and updating the XML using the OrderXML.modify function).
I have tried the following for the where clause:
WHERE OrderXML.value('(/Order/InternalInformation/InternalOrderBreakout/InternalOrderHeader/InternalOrderDetails/InternalOrderDetail/Item_Number/node())[1]','nvarchar(64)') like '%13COTRGUID'
That does work, but it seems to me that I need to ALSO include my second condition (PriceLevel=NONFREE) in the same where clause and I cannot figure out how to do it. Perhaps I can put in an AND for the second condition like this...
AND OrderXML.value('(/Order/InternalInformation/InternalOrderBreakout/InternalOrderHeader/InternalOrderDetails/InternalOrderDetail/PriceLevel/node())[1]','nvarchar(64)') = 'NONFREE'
but I am afraid it will end up operating like an OR since it is an XML query.
Once I get the WHERE clause right I will update the column using a SET like this:
UPDATE Orders SET orderXml.modify('replace value of (/Order/InternalInformation/InternalOrderBreakout/InternalOrderHeader/InternalOrderDetails/InternalOrderDetail/PriceLevel[1]/text())[1] with "NONFREE"')
However, I ran this statement on some test data and none of the XML columns where updated (even though it said zz rows effected).
I have been at this for several hours to no avail. Help is appreciated. Thanks.
if you don't have more than one node with your condition in each row of Orders table, you can use this:
update orders set
data.modify('
replace value of
(
/Order/InternalInformation/InternalOrderBreakout/
InternalOrderHeader/InternalOrderDetails/
InternalOrderDetail[
Item_Number[contains(., "COTRGUID")] and
PriceLevel="NONFREE"
]/PriceLevel/text()
)[1]
with "FREE"
');
sql fiddle demo
If you could have more than one node in one row, there're a several possible solutions, none of each is really elegant, sadly.
You can reconstruct all xmls in table - sql fiddle demo
or you can do your updates in the loop - sql fiddle demo
This may get you off the hump.
Replace #HolderTable with the name of your table.
SELECT T2.myAlias.query('./../PriceLevel[1]').value('.' , 'varchar(64)') as MyXmlFragmentValue
FROM #HolderTable
CROSS APPLY OrderXML.nodes('/InternalOrderDetails/InternalOrderDetail/Item_Number') as T2(myAlias)
SELECT T2.myAlias.query('.') as MyXmlFragment
FROM #HolderTable
CROSS APPLY OrderXML.nodes('/InternalOrderDetails/InternalOrderDetail/Item_Number') as T2(myAlias)
EDIT:
UPDATE
#HolderTable
SET
OrderXML.modify('replace value of (/InternalOrderDetails/InternalOrderDetail/PriceLevel/text())[1] with "MyNewValue"')
WHERE
OrderXML.value('(/InternalOrderDetails/InternalOrderDetail/PriceLevel)[1]', 'varchar(64)') = 'FREE'
print ##ROWCOUNT
Your issue is the [1] in the above.
Why did I put it there?
Here is a sentence from the URL listed below.
Note that the target being updated must be, at most, one node that is explicitly specified in the path expression by adding a "[1]" at the end of the expression.
http://msdn.microsoft.com/en-us/library/ms190675.aspx
EDIT.
I think I've discovered the the root of your frustration. (No fix, just the problem).
Note below, the second query works.
So I think the [1] is some cases is saying "only ~~search~~ the first node".....and not (as you and I were hoping)...... "use the first node..after you find a match".
UPDATE
#HolderTable
SET
OrderXML.modify('replace value of (/InternalOrderDetails/InternalOrderDetail/PriceLevel/text())[1] with "MyNewValue001"')
WHERE
OrderXML.value('(/InternalOrderDetails/InternalOrderDetail/PriceLevel[text() = "NONFREE"])[1]', 'varchar(64)') = 'NONFREE'
/* and OrderXML.value('(/InternalOrderDetails/InternalOrderDetail/Item_Number)[1]', 'varchar(64)') like '%COTRGUID' */
UPDATE
#HolderTable
SET
OrderXML.modify('replace value of (/InternalOrderDetails/InternalOrderDetail/PriceLevel/text())[1] with "MyNewValue002"')
WHERE
OrderXML.value('(/InternalOrderDetails/InternalOrderDetail/PriceLevel[text() = "FREE"])[1]', 'varchar(64)') = 'FREE'
Try this :
;with InternalOrderDetail as (SELECT id,
Tbl.Col.value('Item_Number[1]', 'varchar(40)') Item_Number,
Tbl.Col.value('CountOfNumber[1]', 'int') CountOfNumber,
case
when Tbl.Col.value('Item_Number[1]', 'varchar(40)') like '%COTRGUID'
and Tbl.Col.value('PriceLevel[1]', 'varchar(40)')='NONFREE'
then 'FREE'
else
Tbl.Col.value('PriceLevel[1]', 'varchar(40)')
end
PriceLevel
FROM (select id ,orderxml from demo)
as a cross apply orderxml.nodes('//InternalOrderDetail')
as
tbl(col) ) ,
cte_data as(SELECT
ID,
'<InternalOrderDetails>'+(SELECT ITEM_NUMBER,COUNTOFNUMBER,PRICELEVEL
FROM InternalOrderDetail
where ID=Results.ID
FOR XML AUTO, ELEMENTS)+'</InternalOrderDetails>' as XML_data
FROM InternalOrderDetail Results
GROUP BY ID)
update demo set orderxml=cast(xml_data as xml)
from demo
inner join cte_data on demo.id=cte_data.id
where cast(orderxml as varchar(2000))!=xml_data;
select * from demo;
SQL Fiddle
I have handled following cases :
1. As required both where clause in question.
2. It will update all <Item_Number> like '%COTRGUID' and <PriceLevel>= NONFREE in one
node, not just the first one.
It may require minor changes for your data and tables.