int main() {
char userInput[100]; //Store user input
//Take user input
//scanf(" %s",&userInput);
//scanf("%[^\n]s",&userInput);
//scanf("%[^\n]", &userInput);
//gets(userInput);
scanf("%[]s", &userInput); //This takes input but doesnt leave input loop
printf(" %s",userInput);
//i = index to start for looping through the string, starting at the beginning
//count = Stores occurrences of '$'
//inputLength = length of the input, used for limit of loop
int i =0,count =0;
int inputLength = strlen(userInput);
//Loop through the user input, if the character is '$', the integer count will be incremented
for (i; i < inputLength; i++){
if (userInput[i] == '$'){
count++;
}
}
printf("%d", count);
return 0;
}
Hi i'm having some issues with my code, i need to take an input of 3 lines and count the number of'$' in the input. The input method not commented "scanf("%[]s", &userInput);" is the one only i have discovered to take all 3 lines of input, BUT i can't break the input loop and continue with my program.
Any help would be greatly appreciateed
To read 3 lines with the cumbersome scanf(), code needs to look for '$', '\n', and EOF. The rest of input is discardable.
int count = 0;
int line = 0;
while (line < 3) {
scanf("%*[^$\n]"); // Scan for any amount of characters that are not $ nor \n,
// "*" implies - do not save.
char ch;
if (scanf("%c", &ch) != 1) { // Read next character.
break;
}
if (ch == '$') count++;
else line++;
}
printf("$ count %d\n", count);
As #chux suggested, reading with fgets provides a convenient way to protect from buffer overrun and without having to hard code field-width modifiers in scanf conversion specifiers.
Here, if all you need to do is count the number of '$' characters found in your input (regardless of how many lines), you can simply read ALL the input in fixed sized chunks of data. fgets does just that. It doesn't matter if you have one line, or one million lines of input. It also doesn't matter if your input lines are one-character or one million characters long. You can simply read each line and count the number of '$' found within each chunks of data read, keeping a count of the total found.
You can do this for any character. If you wanted to also count the number of line, you can simply check for '\n' characters and keep a total there as well. The only corner-case in counting lines with fgets is to insure you protect against a non-POSIX end-of-file (meaning a file with no '\n' as the final character). There are a couple of ways to handle this. Checking that the last character read was a '\n' is as good as any.
Putting the pieces together, and protecting against a non-POSIX eof, you could do something similar to the following, which simply reads all data available on stdin and outputs a final '$' and line count:
#include <stdio.h>
#define MAXC 100
int main (void) {
char buf[MAXC] = ""; /* buffer to hold input in up to MAXC size chunks */
size_t lines = 0, dollars = 0; /* counters for lines and dollar chars */
int i = 0;
while (fgets (buf, MAXC, stdin)) /* read all data */
for (i = 0; buf[i]; i++) /* check each char in buf */
if (buf[i] == '$') /* if '$' found */
dollars++; /* increment dollars count */
else if (buf[i] == '\n') /* if '\n' found */
lines++; /* increment line count */
if (i && buf[i-1] != '\n') /* protect against non-POSIX eof */
lines++;
/* output results */
printf ("input contained %zu lines and %zu '$' characters.\n",
lines, dollars);
return 0;
}
Look things over and let me know if you have further questions.
scanf("%[]s", &userInput);" is the one only i have discovered to take all 3 lines of input, BUT i can't break the input loop and continue with my program.
"%[]" is an invalid scanf() specifier. Anything may happen, it is undefined behavior, including taking all lines in and not returning.
The 's' in the format serves no purpose here - drop it.
Yes fgets() is best but let us abuse scanf() to read 3 lines and look for '$'.
char line[3][100] = {0};
// v--------- Consume all leading whitespace
// | vv ----- limit input to 99 characters as scan() appends a \0
// | || v-v-- Look for "not \n"
#define FMT_1LINE " %99[^\n]"
// Let the compiler concatenate the 3 formats into 1 string for scanf
int scan_count = scanf(FMT_1LINE FMT_1LINE FMT_1LINE, line[0], line[1], line[2]);
// Check return value
if (scan_count == 3) {
// Successfully read 3 lines
int count = 0;
for (int line_index = 0; line_index < 3; line_index++) {
char *s = line[line_index];
while (*s) { // no need for strlen(), just loop until the null character
count += *s == '$';
s++;
}
}
printf("$ count %d\n", count);
}
You write:
scanf("%[]s", &userInput); //This takes input but doesnt leave input loop
but the comment is at best misleading. Your format string is malformed, so the behavior of the scanf call is undefined. An empty scan set (between the [] in the format) does not make sense, because the resulting field could never match anything. Therefore, a ] appearing immediately after the opening ] of the scan set is interpreted as a literal character not the ending delimiter. Your scan set is therefore unterminated.
Note, too, that %[ is its own field type, separate from %s. An 's' following the closing ] of the scan set is not part of such a field descriptor, but rather an ordinary character to match.
A trivial way to do this with scanf would be to read characters one at a time in a loop via a %c field. This is probably not what the exercise is looking for, and it's a hack to use scanf() instead of getchar() for this purpose, but perhaps it would serve:
int nl_count = 0;
int dollar_count = 0;
do {
char c;
int result = scanf("%c", &c);
if (result != 1) {
break;
}
switch (c) {
case '\n':
nl_count++;
break;
case '$':
dollar_count++;
break;
}
} while (nl_count < 3);
I'm afraid it would be much more complicated to do it safely reading multiple characters at a time with a %[ field, and there is no safe way to read all three lines in one scanf call, unless you can rely on the input lines not to exceed a line length limit known to you.
int readMatrix() {
char userInput[100][3]; //Store user input
int j = 0, m = 0;
for(m = 0; m < 3; m++){
scanf("%s", &userInput[j][m]); //This takes input (Ex: 22 *(enter)* 33$ *(enter)* 66$ *(enter)*
j++; //increase the column
}
int i =0,count =0;
m = 0;
//Loop through the user input, if the character is '$', the integer count will be incremented
for (i = 0; i < 100; i++){
for(m = 0; m < 3; m++){
if (userInput[i][m] == '$'){
count++;
}
}
}
printf("%d", count);
return 0;
}
Related
I am trying to work on a function that take the input, the minimum character limit and the maximum character limit. I need to accept the input and count the letters even if there are 2 words or more, and
I saw people said scanf("%30[^\n]%*c") would do the trick. However, this only work if it is the first input ever, nothing more. If there has been any input above, it would just terminate the line, leaving count as zero, and run the loop infinitely. Anyone knows why ?
NOTE: I can not use anything from the <string.h> header file.
{
int n = 1;
while (n == 1)
{
int count = 0;
scanf("%30[^\n]%*c", input);
while (input[count] != '\0')
{
count++;
}
if (minimum == maximum)
{
if (count > maximum)
{
printf("String length must be exactly %d chars: ", minimum);
}
else if (count == minimum)
{
n = 0;
return input;
}
else if (count < minimum)
{
printf("String length must be exactly %d chars: ", minimum);
}
}
else
{
if (count > maximum)
{
printf("String length must be no more than %d chars: ", maximum);
}
else if (minimum <= count && count <= maximum)
{
n = 0;
return input;
}
else if (count < minimum)
{
printf("String length must be between %d and %d chars: ", minimum, maximum);
}
}
}
}
The problem with scanf("%30[^\n]%*c", input); is it fails if the new byte from stdin is a newline, returning 0 and leaving input unchanged, potentially uninitialized, causing the rest of the code to have undefined behavior.
Also note that this format will cause scanf() to read and discard the byte pending after the conversion, either the newline, which is your intent or whatever 31st character was typed by the user on the input line.
You should test the return value of scanf() to detect a conversion error and/or the end of file and only scan the array if scanf() returns 1.
You should discard extra bytes at the end of the line with a loop:
int c;
while ((c = getchar()) != EOF && c != '\n')
continue;
Or with scanf():
scanf("%*[^\n]"); // discard the rest of the input line if any
scanf("%*c"); // discard the newline if any.
To get rid of the pending newline left from previous calls to scanf(), you can write:
int c;
if ((c = getchar()) != '\n')
ungetc(c, stdin);
Or using scanf:
scanf("%1*[\n]"); // read and discard at most 1 newline byte
In this program I have taken a dimensional character array of size[3][4],
as long as I enter a 3 characters for each row it will work well.
For example: if I enter abc abd abd I get the same output but if i enter more letters in the first or second or 3rd row I get an error.
How should I check for null character in 2 dimensional?
# include <stdio.h>
#include <conio.h>
# include <ctype.h>
void main()
{
int i=0;
char name[3][4];
printf("\n enter the names \n");
for(i=0;i<3;i++)
{
scanf( "%s",name[i]);
}
printf( "you entered these names\n");
for(i=0;i<3;i++)
{
printf( "%s\n",name[i]);
}
getch();
}
As pointed out by #SouravGhosh, you can limit your scanf with "%3s", but the problem is still there if you don't flush stdin on each iteration.
You can do this:
printf("\n enter the names \n");
for(i = 0; i < 3; i++) {
int c;
scanf("%3s", name[i]);
while ((c = fgetc(stdin)) != '\n' && c != EOF); /* Flush stdin */
}
How should I chk for null character in 2 dimensional ... [something has eaten the rest part, I guess]
You don't need to, at least not in current context.
The problem is in your approach of allocating memory and putting input into it. Your code has
char name[3][4];
if you enter more that three chars, you'll be overwriting the boundary of allocated memory [considering the space of \0]. You've to limit your scanf() using
scanf("%3s",name[i]);
Note:
change void main() to int main(). add a return 0 at the end.
always check the return value of scanf() to ensure proper input.
EDIT:
As for the logical part, you need to eat up the remainings of the input words to start scanning from the beginning of the next word.
Check the below code [Under Linux, so removed conio.h and getch()]
# include <stdio.h>
# include <ctype.h>
int main()
{
int i=0; char name[3][4];
int c = 0;
printf("\n enter the names \n");
for(i=0;i < 3;i++)
{
scanf( "%3s",name[i]);
while(1) // loop to eat up the rest of unwanted input
{ // upto a ' ' or `\n` or `EOF`, whichever is earlier
c = getchar();
if (c == ' ' || c == '\n' || c == EOF) break;
}
}
printf( "you entered these names\n");
for(i=0;i<3;i++)
{
printf( "%s\n",name[i]);
}
return 0;
}
(Cringing after reading the answers to date.)
First, state the problem clearly. You want to read a line from stdin, and extract three short whitespace separated strings. The stored strings are NUL terminated and at most three characters (excluding the NUL).
#include <stdio.h>
void main(int, char**) {
char name[3][4];
printf("\n enter the names \n");
{
// Read tbe line of input text.
char line[80];
if (0 == fgets(line, sizeof(line), stdin)) {
printf("Nothing read!\n");
return 1;
}
int n_line = strlen(line);
if ('\n' != line[n_line - 1]) {
printf("Input too long!\n");
return 2;
}
// Parse out the three values.
int v = sscanf(line, "%3s %3s %3s", name[0], name[1], name[2]);
if (3 != v) {
printf("Too few values!\n");
return 3;
}
}
// We now have the three values, with errors checked.
printf("you entered these names\n%s\n%s\n%s\n",
name[0], name[1], name[2]
);
return 0;
}
you might consider something on the order of scanf( "%3s%*s",name[i]);
which should, if I recall correctly, take the first three characters (up to a whitespace) into name, and then ignore anything else up to the next white space. This will cover your long entries and it does not care what the white space is.
This is not a perfect answer as it will probably eat the middle entry of A B C if single or double character entries are mode. strtok, will separate a line into useful bits and you can then take substrings of the bits into your name[] fields.
Perhaps figuring out the entire requirement before writing code would be the first step in the process.
Ok, i'm a student in his first experiences with programmaing so be kind ;) this is the correct code to print "n" times a string on screen...
#include <stdio.h>
#include <string.h>
#define MAX 80+1+1 /* 80+\n+\0 */
int main(void)
{
char message[MAX];
int i, n;
/* input phase */
printf("Input message: ");
i = 0;
do {
scanf("%c", &message[i]);
} while (message[i++] != '\n');
message[i] = '\0';
printf("Number of repetitions: ");
scanf("%d", &n);
/* output phase */
for (i=0; i<n; i++) {
printf("%s", message);
}
return 0;
}
why in the do-while form he needs to check if message[i++] != '\n' and not just message[i] != '\n'??
The proper way to write that input loop is, in my opinion, something along the lines of:
fgets(message, sizeof message, stdin);
in other words, don't use a character-by-character loop, just use the standard library's function that reads a string terminated by newline and be done.
The do { ... } while(...) loop in your code reads characters one at a time and stores them in message. The index of the next character is one more that the index of the previous character, that's why we should increase index variable i after the current character is stored. The algorithm is:
Read the next character and store it in message[i].
If this character is '\n', exit.
Increase i and goto 1.
The expression message[i++] increments i after it was used as an index into message, so that next time we will look at the next character in the string. So, while (message[i++] != '\n') combines steps 2 and 3.
The same in for-loop:
int i;
for (i = 0; scanf("%c", &message[i]) && message[i] != '\n'; ++i);
But as #unwind pointed, it's better not to use char-by-char input.
I want to have a user enter numbers separated by a space and then store each value as an element of an array. Currently I have:
while ((c = getchar()) != '\n')
{
if (c != ' ')
arr[i++] = c - '0';
}
but, of course, this stores one digit per element.
If the user was to type:
10 567 92 3
I was wanting the value 10 to be stored in arr[0], and then 567 in arr[1] etc.
Should I be using scanf instead somehow?
There are several approaches, depending on how robust you want the code to be.
The most straightforward is to use scanf with the %d conversion specifier:
while (scanf("%d", &a[i++]) == 1)
/* empty loop */ ;
The %d conversion specifier tells scanf to skip over any leading whitespace and read up to the next non-digit character. The return value is the number of successful conversions and assignments. Since we're reading a single integer value, the return value should be 1 on success.
As written, this has a number of pitfalls. First, suppose your user enters more numbers than your array is sized to hold; if you're lucky you'll get an access violation immediately. If you're not, you'll wind up clobbering something important that will cause problems later (buffer overflows are a common malware exploit).
So you at least want to add code to make sure you don't go past the end of your array:
while (i < ARRAY_SIZE && scanf("%d", &a[i++]) == 1)
/* empty loop */;
Good so far. But now suppose your user fatfingers a non-numeric character in their input, like 12 3r5 67. As written, the loop will assign 12 to a[0], 3 to a[1], then it will see the r in the input stream, return 0 and exit without saving anything to a[2]. Here's where a subtle bug creeps in -- even though nothing gets assigned to a[2], the expression i++ still gets evaluated, so you'll think you assigned something to a[2] even though it contains a garbage value. So you might want to hold off on incrementing i until you know you had a successful read:
while (i < ARRAY_SIZE && scanf("%d", &a[i]) == 1)
i++;
Ideally, you'd like to reject 3r5 altogether. We can read the character immediately following the number and make sure it's whitespace; if it's not, we reject the input:
#include <ctype.h>
...
int tmp;
char follow;
int count;
...
while (i < ARRAY_SIZE && (count = scanf("%d%c", &tmp, &follow)) > 0)
{
if (count == 2 && isspace(follow) || count == 1)
{
a[i++] = tmp;
}
else
{
printf ("Bad character detected: %c\n", follow);
break;
}
}
If we get two successful conversions, we make sure follow is a whitespace character - if it isn't, we print an error and exit the loop. If we get 1 successful conversion, that means there were no characters following the input number (meaning we hit EOF after the numeric input).
Alternately, we can read each input value as text and use strtol to do the conversion, which also allows you to catch the same kind of problem (my preferred method):
#include <ctype.h>
#include <stdlib.h>
...
char buf[INT_DIGITS + 3]; // account for sign character, newline, and 0 terminator
...
while(i < ARRAY_SIZE && fgets(buf, sizeof buf, stdin) != NULL)
{
char *follow; // note that follow is a pointer to char in this case
int val = (int) strtol(buf, &follow, 10);
if (isspace(*follow) || *follow == 0)
{
a[i++] = val;
}
else
{
printf("%s is not a valid integer string; exiting...\n", buf);
break;
}
}
BUT WAIT THERE'S MORE!
Suppose your user is one of those twisted QA types who likes to throw obnoxious input at your code "just to see what happens" and enters a number like 123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890 which is obviously too large to fit into any of the standard integer types. Believe it or not, scanf("%d", &val) will not yak on this, and will wind up storing something to val, but again it's an input you'd probably like to reject outright.
If you only allow one value per line, this becomes relatively easy to guard against; fgets will store a newline character in the target buffer if there's room, so if we don't see a newline character in the input buffer then the user typed something that's longer than we're prepared to handle:
#include <string.h>
...
while (i < ARRAY_SIZE && fgets(buf, sizeof buf, stdin) != NULL)
{
char *newline = strchr(buf, '\n');
if (!newline)
{
printf("Input value too long\n");
/**
* Read until we see a newline or EOF to clear out the input stream
*/
while (!newline && fgets(buf, sizeof buf, stdin) != NULL)
newline = strchr(buf, '\n');
break;
}
...
}
If you want to allow multiple values per line such as '10 20 30', then this gets a bit harder. We could go back to reading individual characters from the input, and doing a sanity check on each (warning, untested):
...
while (i < ARRAY_SIZE)
{
size_t j = 0;
int c;
while (j < sizeof buf - 1 && (c = getchar()) != EOF) && isdigit(c))
buf[j++] = c;
buf[j] = 0;
if (isdigit(c))
{
printf("Input too long to handle\n");
while ((c = getchar()) != EOF && c != '\n') // clear out input stream
/* empty loop */ ;
break;
}
else if (!isspace(c))
{
if (isgraph(c)
printf("Non-digit character %c seen in numeric input\n", c);
else
printf("Non-digit character %o seen in numeric input\n", c);
while ((c = getchar()) != EOF && c != '\n') // clear out input stream
/* empty loop */ ;
break;
}
else
a[i++] = (int) strtol(buffer, NULL, 10); // no need for follow pointer,
// since we've already checked
// for non-digit characters.
}
Welcome to the wonderfully whacked-up world of interactive input in C.
Small change to your code: only increment i when you read the space:
while ((c = getchar()) != '\n')
{
if (c != ' ')
arr[i] = arr[i] * 10 + c - '0';
else
i++;
}
Of course, it's better to use scanf:
while (scanf("%d", &a[i++]) == 1);
providing that you have enough space in the array. Also, be careful that the while above ends with ;, everything is done inside the loop condition.
As a matter of fact, every return value should be checked.
scanf returns the number of items successfully scanned.
Give this code a try:
#include <stdio.h>
int main()
{
int arr[500];
int i = 0;
int sc = 0; //scanned items
int n = 3; // no of integers to be scanned from the single line in stdin
while( sc<n )
{
sc += scanf("%d",&arr[i++]);
}
}
I'm kind of new to C, and the input reading is really confusing me. I'm trying to initialize an array of size 4, but sometimes the user will enter valid input of 3. In Java, I could check the length of the input and add conditionals, but I'm not sure how this works in C.
main(void){
char str[N];
int i;
for(i = 0; i < N; i++){
scanf("%c", &str[i]);
}
for(i = 0; i < N; i++){
printf("%c\n", str[i]);
}
}
Right now, if I input 4 or more, it works fine. If I input 3, it breaks. I'd like it to handle both 3 or 4 characters.
Actually, the root of the problem is: I'm trying to figure out a way in C to read in a 24-hour-clock time, and add it to a 24-hour-clock duration. Should I be approaching this an entirely different way?
Thanks,
The short answer is: you can't.
Using scanf() is particularly dangerous because of this if you want to read in a string (%s); if the user enters more input than your buffer can hold, you have a buffer overflow on your hands.
fgets() on the other hand, allows you to specify the max number of bytes you will read, preventing you from overflowing the buffer.
Here's a quick example on how you'd write a function for some input that verified that the input was within a specified length and was a complete line (ending with \n - this routine discards the \n from the input):
void getInput(char *question, char *inputBuffer, int bufferLength)
{
printf("%s (Max %d characters)\n", question, bufferLength - 1);
fgets(inputBuffer, bufferLength, stdin);
if (inputBuffer[strlen(inputBuffer) -1] != '\n')
{
int dropped = 0;
while (fgetc(stdin) != '\n')
dropped++;
if (dropped > 0) // if they input exactly (bufferLength - 1)
// characters, there's only the \n to chop off
{
printf("Woah there partner, your input was over the limit by %d characters, try again!\n", dropped );
getInput(question, inputBuffer, bufferLength);
}
}
else
{
inputBuffer[strlen(inputBuffer) -1] = '\0';
}
}
int main()
{
char firstAnswer[10];
getInput("Go ahead and enter some stuff:", firstAnswer, 10);
printf("Okay, I got: %s\n",firstAnswer);
}
scanf() allows the use of maximum width specifiers:
So scanf("%3s", buffer) reads at most 3 characters + 1 NUL terminator.