I'm trying to connect a C code to my mongoDB database.
I wrote on terminal:
sudo apt-get install libmongoc-1.0-0 #Everything OK
sudo apt-get install libbson-1.0 #Everything Ok
Then, I tried to define bjson.h and mongoc.h using PKG_CONFIG_PATH. In this step, I could find and define correctly bson.h, cause I found libbson-1.0.pc in /usr/lib64/pkgconfig, but I can't find libmongoc-1.0.pc or libmongoc-1.0-0.pc!
So, when I try:
gcc read_mongo.c $(pkg-config --cflags --libs libbson-1.0)
Just doesn't work! Cause gcc doesn't found mongoc.h libraries.
I tried searching for mongo.h too on my PC and nothing.
How can I get it? There's something over there am I losing?
as you said, read_mongo.c is looking for (and cannot find) mongoc.h, not bson.h
answer can be found in the tutorial package config.
http://mongoc.org/libmongoc/current/tutorial.html#pkg-config
your gcc line
gcc read_mongo.c $(pkg-config --cflags --libs libbson-1.0)
----------------------------------------------^
required gcc line (include and link against libmongoc rather than libbson)
gcc -o read_mongo.c read_mongo.c $(pkg-config --libs --cflags libmongoc-1.0)
--------------------------------------------------------------^
Related
I'm trying to compile a client using hiredis in C on Mac OS X.
I've installed hiredis with:
brew install hiredis
But still get the error:
fatal error: 'hiredis.h' file not found
My hiredis.h is however in:
/usr/local/include/hiredis/hiredis.c
How do I tell the compiler this?
I'm compiling with:
gcc test.c -o test
In your question you said hiredis.h is in /usr/local/include/hiredis/hiredis.c, which doesn't really make any sense.
Assuming you meant that your hiredis.h is in /usr/local/include/hiredis. You can do like:
gcc test.c -I/usr/local/include/hiredis -o test
Read about -I in this SO post.
UPDATE:
As mentioned by #EricPostpischil in comments, its a better idea to just include like:
#include < hiredis/hiredis.h>
I am still not sure if /usr/local/include is in default include path. If it is, well no need to do anything, just compile like:
gcc test.c -o test
and if it isn't,
gcc test.c -I/usr/local/include -o test
If you have installed hiredis with homebrew, you can see what's in the package like this:
brew ls --verbose hiredis
/usr/local/Cellar/hiredis/0.14.0/INSTALL_RECEIPT.json
/usr/local/Cellar/hiredis/0.14.0/CHANGELOG.md
/usr/local/Cellar/hiredis/0.14.0/.brew/hiredis.rb
...
...
/usr/local/Cellar/hiredis/0.14.0/lib/libhiredis.dylib
/usr/local/Cellar/hiredis/0.14.0/lib/pkgconfig/hiredis.pc <--- PKG-CONFIG
/usr/local/Cellar/hiredis/0.14.0/lib/libhiredis.a
/usr/local/Cellar/hiredis/0.14.0/lib/libhiredis.0.14.dylib
...
...
And, as you can see, it gives you a pkg-config file with all the settings in it that you need. So, you might as well install pkg-config and do it properly!
brew install pkg-config
Now, if you want to know the C compiler flags for hiredis, you do:
pkg-config --cflags hiredis
-D_FILE_OFFSET_BITS=64 -I/usr/local/Cellar/hiredis/0.14.0/include/hiredis
And if you want to know the linker settings, you do:
pkg-config --libs hiredis
-L/usr/local/Cellar/hiredis/0.14.0/lib -lhiredis
And so, your compile-link command becomes very simple and updates itself when you update the packages:
gcc-9 $(pkg-config --cflags --libs hiredis) -o program program.c
I'm trying to use in one of my projects. I'm working on a Mac, have gotten MacPorts with pkg-config and glib-2.0 packages.
When I try to make a file containing an include to above path, I get the following error (line above it is for clarity that it does actually give me the right dirs):
$ pkg-config --cflags --libs glib-2.0
-I/opt/local/lib/glib-2.0/include -I/opt/local/include -L/opt/local/lib -lglib-2.0 -lintl
$ make
gcc hash-glib.c -c `pkg-config --cflags --libs glib-2.0` -std=c99 -Wall -Wextra -pedantic -O2
hash-glib.c:2:23: error: glib/glib.h: No such file or directory
$
Presumably, you've run:
ls -l /opt/local/lib/glib-2.0/include/glib/glib.h \
/opt/local/include/glib/glib.h
to demonstrate that the header #include "glib/glib.h" actually is present in one of the locations where you've been told by pkg-config that it could be found. If it isn't there, then pkg-config is misleading you, and the compiler is telling you that you've been hoodwinked.
Since the compiler will have done its utmost to find the header, it is a reasonable bet that the file isn't in either of those locations. You are then left with detective work: where is the glib.h header installed?
find /opt/local -type f -name glib.h
If that tells you where it is, you can then work out what pkg-config should be saying. If that fails to find it, widen the search area. If you still can't find it, maybe it isn't installed yet? Or you only installed the glib runtime, not the development package.
Hi everyone I have a program with the following includes:
gtk/gtk.h
glib.h
I have used the commands:
sudo apt-get install libgtk2.0-dev glib
sudo apt-get install glade
But I am still getting the error that glib was not found and gtk/gtk.h was not found. It's the first time I am using gtk and I have no idea how it works or how to install it.
The command you're supposed to use (in more recent releases of linux/gtk) is pkg-config, not gtk-config. gtk-config is intended for pre 2.0 gtk development.
Consider the file you're compiling is called foo.c, to compile it under gtk-2.0, you would use, from the command line the command:
gcc `pkg-config --cflags glib-2.0 gtk+-2.0` foo.c -o foo `pkg-config --libs glib-2.0 gtk+-2.0`
This should compile, and give you a file foo, that can be executed.
but really, use a makefile, as this stuff is a pain to keep typing. I would write out a sample makefile, but there are rules that need to be followed in the formatting of them that makes it difficult to type in the editor window.
# Sample Makefile
CFLAGS := $(shell pkg-config --cflags glib-2.0 gtk+-2.0)
LDFLAGS := $(shell pkg-config --libs glib-2.0 gtk+-2.0)
foo: foo.c
<TAB HERE NOT SPACES>$(CC) $(CFLAGS) $< -o $# $(LDFLAGS)
This defines a simple rule saying to make foo, it depends on foo.c, so of foo.c is newer than foo, it will be rebuilt. Where I write 'TAB HERE NOT SPACES' it must be a tab character, and cannot be a set of space characters.
type "locate glib.h" to determine file's location (assuming a contemporary linux distribution - your post doesn't provide much information).
Then ensure the path to glib.h is properly specified in your Makefile. (You do have a Makefile, don't you?) Perform the same steps for gtk.h.
Please read the official documentation. It explains how to compile GTK applications.
Basically to compile a hello.c file to generate a hello program, you'll type:
gcc `pkg-config --cflags --libs gtk+-2.0` hello.c -o hello
i have written a program under ubuntu, in which i include gtkmozembed.h. I am facing a problem in compiling the program.Below is the simplest form of a program which uses gtkmozembed.
#include <gtk/gtk.h>
#include <stdio.h>
#include <gtkmozembed.h>
int main(){
GtkWidget *mozEmbed;
mozEmbed = gtk_moz_embed_new();
return 0;
}
Eventhough, the above program is doing nothing, compiling that program is a lot for me...
I am trying to comile the above program like below
gcc `pkg-config --libs --cflags gtk+-2.0` test.c -o test
and it is giving the following error...
error: gtkmozembed.h: No such file or directory
I can understand, something else has to be added to the above gcc line,so that the compiler can find the gtkmozembed.h, but not getting what is that, 'something'...Looking for someone's help..Thank you...
Install libxul-dev (sudo apt-get install libxul-dev) and include
#include <gtkmozembed.h>
in the main file(test.c) and compile with
gcc `pkg-config --cflags --libs gtk+-2.0 xulrunner-gtkmozembed` test.c -o test
Your problem is that gtkmozembed.h is not found in the standard include file lookup path (well, the error does tell you that pretty obviously). On my system it lives in $(include)/gtkmozembed/, so you have two options
Change the path of the included file in your source
#include <gtkmozembed/gtkmozembed.h>
or manually add the path to the lookup path
gcc `pkg-config --libs --cflags gtk+-2.0` -I/usr/include/gtkmozembed test.c -o test
You should go with option 1).
This will tell gcc where to find the include file, but as pointed out by Matthew this is not enough: you will most probably also need to add more information for linking and required additional includes. Thankfully gtk-mozembed comes with a pkg-config file, so you can get all the needed information like you did for gtk+-2.0 with
pkg-config --libs --cflags mozilla-gtkmozembed-embedding
or combined with the other call
gcc `pkg-config --libs --cflags gtk+-2.0 mozilla-gtkmozembed-embedding` test.c -o test
You should also (just for kicks) have a look at what pkg-config does. The part in "`" is just what is return by the shell when executing that command. On my machine:
$ pkg-config --libs --cflags mozilla-gtkmozembed-embedding
-DXPCOM_GLUE -fshort-wchar \
-I/usr/include/xulrunner-1.9.2 -L/usr/lib/xulrunner-devel-1.9.2/lib -lxpcomglue
(line breaks added by me). The -I parts just adds additional needed directories to the include file lookup path -- they were emitted because you called with --cflags. The entries with -lxpcomglue is due to calling with --libs and ask for linking against this library, i.e. libxpcomglue.so. It is located in /usr/lib/xulrunner-devel-1.9.2/lib. The rest are a define and a gcc flag needed for gtkmozembed.
Try this:
gcc `pkg-config --libs --cflags gtk+-2.0 mozilla-gtkmozembed-embedding` test.c -o test
So here's the world's simplest glib program:
#include <glib.h>
I try to compile it with gcc test.c and I get:
test.c:1:18: error: glib.h: No such file or directory
So I make sure that I have the right packages:
# dpkg -l | grep libglib
ii libglib-perl 1:1.183-1 Perl interface to the GLib and GObject libra
ii libglib1.2-dev 1.2.10-19build1 The GLib library of C routines (development)
ii libglib1.2ldbl 1.2.10-19build1 The GLib library of C routines
ii libglib2.0-0 2.20.1-0ubuntu2 The GLib library of C routines
ii libglib2.0-cil 2.12.1-1ubuntu2 CLI binding for the GLib utility library 2.1
ii libglib2.0-data 2.18.2-0ubuntu2 Common files for GLib library
ii libglib2.0-dev 2.20.1-0ubuntu2 Development files for the GLib library
ii libglibmm-2.4-1c2a 2.18.1-1 C++ wrapper for the GLib toolkit (shared lib
Then I search for any "glib.h" anywhere under /usr/include. I get two, /usr/include/glib-1.2/glib.h and /usr/include/glib-2.0/glib.h. So I try:
$ gcc -I/usr/include/glib-2.0 -Wall test.c
In file included from /usr/include/glib-2.0/glib/galloca.h:34,
from /usr/include/glib-2.0/glib.h:32,
from test.c:2:
/usr/include/glib-2.0/glib/gtypes.h:34:24: error: glibconfig.h: No such file or directory
(about 10,000 more errors snipped)
I don't seem to have a glibconfig.h anywhere on my computer.
What do I do now?
glib tends to hide itself... Your include statement doesn't work because GCC doesn't automatically search subdirectories, and so cannot see the glib.h in glib-1.2 or glib-2.0.
Read the Compiling GLib Applications page in the GLIB manuals... you use commands like pkg-config --cflags glib-2.0 to get the right flags for GCC.
The canonical way to do what you are trying is
% gcc test.c -Wall -o test `pkg-config --cflags --libs glib-2.0`
Note the back-ticks, which tell the shell to run the pkg-config command "in-place".
> > The canonical way to do what you are trying is
> % gcc test.c -Wall -o test `pkg-config --cflags --libs glib-2.0`
Sorry, but no. That is a common misconception, that just happens to work in most cases on ELF-based systems, Linux in particular. The canonical way is to pass in the cflags and libraries separately, in the correct and traditional locations on the command line, like this:
gcc -Wall -o test `pkg-config --cflags glib-2.0` test.c `pkg-config --libs glib-2.0`
It is a pity that pkg-config accepts both the --cflags and --libs options at the same time, as it means this incorrect meme will never die, and people used to it on Linux will continue to be baffled when they then try the same on other platforms.
As #chris said use pkg-config.
glibconfig.h is missing
it’s because this file is not in the /usr/include/glib-2.0, but in /usr/lib/glib-2.0. So you have to include also this /usr/lib path or copy the file to the /include/glib-2.0
I am using glib.h as well-
Do this to compile all your glib.h programs :)
gcc `pkg-config --cflags --libs glib-2.0` filename.c
Make sure to surround pkg-config --cflags --libs glib-2.0 with back-quotes
which you find under tilde (left most key on the querty keyboard).
Thank me later .. :P
apt-get build-dep is your friend -- nobody can remember all the packages you need to build something.